Corrosion Behavior of Different Coatings Prepared on the Surface of AZ80 Magnesium Alloy in Simulated Body Fluid
Source abstract
Abstract
A laser shock peening (LSP) layer, a micro-arc oxidation (MAO) bio-coating, and an LSP/MAO bio-composite coating were fabricated on the surface of AZ80 magnesium (Mg) alloy. The LSP-, MAO-, and LSP/MAO-treated samples were subjected to a dynamic immersion test for 24 h in simulated body fluid (SBF) with a flow rate of 1 mL/s. The corrosion evolution behavior of the three samples in SBF solution was investigated by electrochemical tests at 0.5, 2, 4, 12, 16, and 24 h during the dynamic immersion. The results indicated that the three surface-treated samples exhibited different corrosion behaviors at different degradation stages. The LSP/MAO sample showed the best corrosion resistance. The anti-corrosion effect of the LSP nanocrystalline layer on the substrate material during dynamic degradation is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Surface Treatment and Residual Stress · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. B.W. Christoph, R. Philipp, Z. Philine, S. Wolfram, A. Daniela, K.P. Schmitz, and G. Niels, Mechanical Behavior of In Vivo Degraded Second Generation Resorbable Magnesium Scaffolds (RMS), J. Mech. Behav. Biomed. Mater., 2019, 91, p 174–18110.1016/j.jmbbm.2018.12.008 ↗
2. Y.F. Zheng and H.T. Yang, Research Progress in Biodegradable Metals for Stent Application, Acta Metall. Sin., 2017, 53, p 1227–1237
3. L.Y. Han, X. Li, F. Xue, C.L. Chu, and J. Bai, Biocorrosion Behavior of Micro-Arc-Oxidized AZ31 Magnesium Alloy in Different Simulated Dynamic Physiological Environments, Surf. Coat. Technol., 2019, 361, p 240–24810.1016/j.surfcoat.2019.01.052 ↗
4. K. Yang, and L. Tan, Control of biodegradation of magnesium (Mg) alloys for medical applications, in Corrosion Prevention of Magnesium Alloys (2013), pp. 509–543
5. F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. Meyer-Lindenberg, C.J. Wirth, and H. Windhagen, In Vivo Corrosion of Four Magnesium Alloys and the Associated Bone Response, Biomaterials, 2005, 26, p 3557–356310.1016/j.biomaterials.2004.09.049 ↗
6. G.Y. Yuan and J.L. Niu, Research Progress of Biodegradable Magnesium Alloys for Orthopedic Applications, Acta Metall. Sin., 2017, 53, p 1168–1180
7. M. Haude, R. Erbel, and P. Erne, Safety and Performance of the Drug-Eluting Absorbable Metal Scaffold (DREAMS) in Patients With De-Novo Coronary Lesions: 12 Month Results of the Prospective, Multicentre, First-In-Man BIOSOLVE-I, Trial, Lancet, 2013, 381, p 836–84410.1016/S0140-6736(12)61765-6 ↗
8. R. Zeng, W. Dietzel, F. Witte, N. Hort, and C. Blawert, Progress and Challenge for Magnesium Alloys as Biomaterials, Adv. Eng. Mater., 2008, 10(8), p B3–B1410.1002/adem.200800035 ↗
9. S. Agarwal, J. Curtin, B. Duffy, and S. Jaiswa, Biodegradable Magnesium Alloys for Orthopaedic Applications: A Review on Corrosion, Biocompatibility and Surface Modifications, Mater. Sci. Eng., C, 2016, 68, p 948–96310.1016/j.msec.2016.06.020 ↗
10. Y. Yun, Z.Y. Dong, N. Lee, Y.J. Liu, D.C. Xue, X.F. Guo, J. Kuhlmann, A. Doepke, H. Brian Halsall, W. Heineman, S. Sundaramurthy, M.J. Schulz, Z.Z. Yin, V. Shanov, D. Hurd, P. Nagy, W.F. Li, and C. Fox, Revolutionizing Biodegradable Metals, Mater. Today, 2009, 2, p 22–3210.1016/S1369-7021(09)70273-1 ↗
11. Y.W. Song, D.Y. Shan, R.S. Chen, F. Zhang, and E.H. Han, Biodegradable Behaviors of AZ31 Magnesium Alloy in Simulated Body Fluid, Mater. Sci. Eng., C, 2009, 29, p 1039–104510.1016/j.msec.2008.08.026 ↗
12. Z.X. Wang, G.Q. Chen, L.Y. Chen, L. Xu, and S. Lu, Degradation Behavior of Micro-Arc Oxidized ZK60 Magnesium Alloy in a Simulated Body Fluid, Metals, 2018, 8, p 2410.3390/met8010024 ↗
13. Y.H. Gu, S. Bandopadhyay, C.F. Chen, Y.J. Guo, and C.Y. Ning, Effect of Oxidation Time on the Corrosion Behavior of Micro-Arc Oxidation Produced AZ31 Magnesium Alloys in Simulated Body Fluid, J. Alloys Compd., 2012, 543, p 109–11710.1016/j.jallcom.2012.07.130 ↗
14. Y.H. Gu, S. Bandopadhyay, C.H. Chen, C.Y. Ning, and Y.J. Guo, Long-Term Corrosion Inhibition Mechanism of Microarc Oxidation Coated AZ31 Mg Alloys for Biomedical Applications, Mater. Des., 2013, 46, p 66–7510.1016/j.matdes.2012.09.056 ↗
15. K.Y. Luo, C.Y. Wang, C.Y. Cui, J.Z. Lu, and Y.F. Lu, Effects of Coverage Layer on the Electrochemical Corrosion Behaviour of Mg-Al-Mn Alloy Subjected to Massive Laser Shock Peening Treatment, J. Alloy. Compd., 2019, 782, p 1058–107510.1016/j.jallcom.2018.12.224 ↗
16. V.K. Caralapatti and S. Narayanswamy, Effect of High Repetition Laser Shock Peening on Biocompatibility and Corrosion Resistance of Magnesium, Opt. Laser Technol., 2017, 88, p 75–8410.1016/j.optlastec.2016.09.003 ↗
17. Y. Xiong, C. Lu, C. Wang, and R.G. Song, Characterization and Electrochemical Corrosion Behavior of Biological Ceramic Coatings on Magnesium Alloy by Micro-Arc Oxidation, J. Bio Based Mater. Bioenergy, 2014, 8, p 1–710.1166/jbmb.2014.1407 ↗
18. Y. Xiong, C. Lu, C. Wang, and R.G. Song, The n-MAO/EPD Bio-ceramic Composite Coating Fabricated on ZK60 Magnesium Alloy Using Combined Micro-arc Oxidation with Electrophoretic Deposition, Appl. Surf. Sci., 2014, 322, p 230–23510.1016/j.apsusc.2014.10.103 ↗
19. Y. Xiong, C. Lu, C. Wang, and R.G. Song, Degradation Behavior of n-MAO/EPD Bio-ceramic Composite Coatings on Magnesium Alloy in Simulated Body Fluid, J. Alloy. Compd., 2015, 625, p 258–26510.1016/j.jallcom.2014.11.084 ↗
20. Y. Xiong, Z.Y. Yang, X.X. Hu, and R.G. Song, Bioceramic Coating Produced on AZ80 Magnesium Alloy by One-Step Microarc Oxidation Process, J. Mater. Eng. Perform., 2019, 28, p 1719–172710.1007/s11665-019-03925-3 ↗
21. Y. Xiong, Q. Hu, R.G. Song, and X.X. Hu, LSP/MAO Composite Bio-coating on AZ80 Magnesium Alloy for Biomedical Application, Mater. Sci. Eng., C, 2017, 75, p 1299–130410.1016/j.msec.2017.03.003 ↗
22. Y. Xiong, Q. Hu, X.X. Hu, and R.G. Song, Microstructure and Corrosion Resistance of Ti3O5-HA Bio-ceramic Coating Fabricated on AZ80 Magnesium Alloy, Surf. Coat. Technol., 2017, 325, p 239–24710.1016/j.surfcoat.2017.06.055 ↗
23. P. Shi, B. Niu, S. Shan, Y. Chen, and Q. Li, Preparation and Characterization of PLA Coating and PLA/MAO Composite Coatings on AZ31 Magnesium Alloy for Improvement of Corrosion Resistance, Surf. Coat. Technol., 2015, 262, p 26–3210.1016/j.surfcoat.2014.11.069 ↗
24. Y. Yang, X.L. Lian, K. Zhou, and G.J. Li, Effects of Laser Shock Peening on Microstructures and Properties of 2195 Al-Li Alloy, J. Alloy. Compd., 2019, 781, p 330–33610.1016/j.jallcom.2018.12.118 ↗
25. C.D. Ding, Y. Tai, D. Wang et al., Super Hydrophobic Composite Coating with Active Corrosion Resistance for AZ31B Magnesium Alloy Protection, Chem. Eng. J., 2019, 357, p 518–53210.1016/j.cej.2018.09.133 ↗
26. C. Khaldi, H. Mathlouthi, and J. Lamloumi, Electrochemical Impedance Spectroscopy Study of the Metal Hydride Alloy/Electrolyte Junction, J. Alloy. Compd., 2009, 479, p 284–28910.1016/j.jallcom.2008.12.150 ↗
27. Y.J. Qiao, W.P. Li, G.X. Wang et al., Corrosion Protection of AZ31 Magnesium Alloy Treated with La3+ Modified 3-methacryloxypropyltrimethoxysilane Conversion Film, J. Rare Earths, 2015, 33, p 647–65410.1016/S1002-0721(14)60466-X ↗
28. P. Zoltowski, On the Electrical Capacitance of Interfaces Exhibiting Constant Phase Element Behaviour, J. Electroanal. Chem., 1998, 443, p 149–15410.1016/S0022-0728(97)00490-7 ↗
29. X. Li, Z. Weng, W. Yuan, X.Z. Luo, H.M. Wong, X.M. Liu, S.L. Wu, K.W.K. Yeung, Y.F. Zheng, and P.K. Chud, Corrosion Resistance of Dicalcium Phosphate Dihydrate/Poly (Lactic-co-Glycolic Acid) Hybrid Coating on AZ31 Magnesium Alloy, Corros. Sci., 2016, 102, p 209–22110.1016/j.corsci.2015.10.010 ↗
30. X.J. Cui, X.Z. Lin, C.H. Liu, R.S. Yang, X.W. Zheng, and M. Gong, Fabrication and Corrosion Resistance of a Hydrophobic Micro-arc Oxidation Coating on AZ31 Mg Alloy, Corros. Sci., 2015, 90, p 402–41210.1016/j.corsci.2014.10.041 ↗
31. Y.C. Xin, C.L. Liu, K.F. Huo, G.Y. Tang, X.B. Tian, and P.K. Chu, Corrosion Behavior of ZrN/Zr Coated Biomedical AZ91 Magnesium Alloy, Surf. Coat. Technol., 2009, 203, p 2554–255710.1016/j.surfcoat.2009.02.074 ↗
32. L.C. Zhao, C.X. Cui, Q.Z. Wang, and S.J. Bu, Corros. Sci., 2010, 52, p 2228–223410.1016/j.corsci.2010.03.008 ↗
33. M.P. Sealy and Y.B. Guo, Fabrication and Characterization of Surface Texture for Bone Ingrowth by Sequential Laser Peening Biodegradable Orthopedic Magnesium-Calcium Implants, J. Med. Dev., 2011, 5, p 011003–01100910.1115/1.4003117 ↗
34. A. Seyfoori, S. Mirdamadi, A. Khavandi, and Z.S. Raufi, Biodegradation Behavior of Micro-arc Oxidized AZ31 Magnesium Alloys Formed in Two Different Electrolytes, Appl. Surf. Sci., 2012, 261, p 92–10010.1016/j.apsusc.2012.07.105 ↗
35. Y. Gu, S. Bandopadhyay, C.F. Chen, Y.J. Guo, and C.Y. Ning, Effect of Oxidation Time on the Corrosion Behavior of Micro-arc Oxidation Produced AZ31 Magnesium Alloys in Simulated Body Fluid, J. Alloy. Compd., 2012, 543, p 109–11710.1016/j.jallcom.2012.07.130 ↗
36. H.H. Luo, Q.Z. Cai, B.K. Wei, B. Yu, D.J. Li, J. He, and Z. Liu, Effect of (NaPO3)6 Concentrations on Corrosion Resistance of Plasma Electrolytic Oxidation Coatings Formed on AZ91D Magnesium Alloy, J. Alloy. Compd., 2008, 464, p 537–54310.1016/j.jallcom.2007.10.072 ↗
37. F. Liu, J.L. Xu, F.P. Wang, L.C. Zhao, and T.D. Shimizu, Biomimetic Deposition of Apatite Coatings on Micro-arc Oxidation Treated Biomedical NiTi Alloy, Surf. Coat. Technol., 2010, 204, p 3294–329910.1016/j.surfcoat.2010.03.044 ↗
38. L. Wen, Y.M. Wang, Y. Liu, Y. Zhou, L.X. Guo, and J.H. Ouyang, EIS Study of a Self-Repairing Micro-arc Oxidation Coating, Corros. Sci., 2011, 53, p 618–62310.1016/j.corsci.2010.10.010 ↗
39. V. Afshari and C. Dehghanian, Effects of Grain Size on the Electrochemical Corrosion Behaviour of Electrodeposited Nanocrystalline Fe Coatings in Alkaline Solution, Corros. Sci., 2009, 51, p 1844–184910.1016/j.corsci.2009.05.015 ↗
40. L. Liu, Y. Li, and F.H. Wang, Influence of Grain Size on the Corrosion Behavior of a Ni-Based Superalloy Nanocrystalline Coating in NaCl Acidic Solution, Electrochim. Acta, 2008, 53, p 2453–246210.1016/j.electacta.2007.10.048 ↗
41. X.C. Li, Y.K. Zhang, J.F. Chen, and Y.L. Lu, Effect of Laser Shock Processing on Stress Corrosion Cracking Behaviour of AZ31 Magnesium Alloy at Slow Strain Rate, Mater. Sci. Technol., 2013, 29, p 626–63010.1179/1743284712Y.0000000166 ↗
42. Y.K. Zhang, J. You, J.Z. Lu, C.Y. Cui, Y.F. Jiang, and X.D. Ren, Effects of Laser Shock Processing on Stress Corrosion Cracking Susceptibility of AZ31B Magnesium Alloy, Surf. Coat. Technol., 2010, 204, p 3947–395310.1016/j.surfcoat.2010.03.015 ↗
43. M.Z. Ge, J.Y. Xiang, L. Yang, and J.T. Wang, Effect of Laser Shock Peening on the Stress Corrosion Cracking of AZ31B Magnesium Alloy in a Simulated Body Fluid, Surf. Coat. Technol., 2017, 310, p 157–16510.1016/j.surfcoat.2016.12.093 ↗