Damping of Selective-Laser-Melted NiTi for Medical Implants
Source abstract
Abstract
NiTi exhibits distinct damping properties associated with the martensite-austenite transformation. We fabricated net-shape NiTi parts layer-by-layer using a laser beam that locally melted the NiTi powder. The damping properties of such NiTi parts were analyzed by the decay of cantilever vibrations in comparison to conventionally prepared NiTi. The dynamic modulus as a function of the temperature was derived from the resonant frequency. We found that the two cantilevers showed a damping ratio of about 0.03 at temperatures below austenite start, maximal values of up to 0.04 in the transformation regions and low values of about 0.005 above austenite finish. The results indicate that selective-laser-melted NiTi qualifies for the fabrication of shock-absorbing medical implants in the same manner than conventionally produced NiTi.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. T. Xing, Y. Zheng, and L. Cui, Transformation and Damping Characteristics of NiTi/NiTi Alloys Synthesized by Explosive Welding, Mater. Trans., 2006, 47(3), p 658–66010.2320/matertrans.47.658 ↗
2. J. van Humbeeck, Non-medical Applications of Shape Memory Alloys, Mater. Sci. Eng. A: Struct. Mater. Prop. Microstruct. Process., 1999, 273–275, p 134–14810.1016/S0921-5093(99)00293-2 ↗
3. T. Bormann, F. Beckmann, M. Schinhammer, H. Deyhle, M. de Wild, and B. Müller, Assessing the Grain Structure of Highly X-ray Absorbing Metallic Alloys, Int. J. Mat. Res., 2013. doi: 10.3139/146.11105210.3139/146.111052 ↗
4. T. Bormann, R. Schumacher, B. Müller, M. Mertmann, and M. de Wild, Tailoring Selective Laser Melting Process Parameters for NiTi Implants, J. Mater. Eng. Perform., 2012, 21(12), p 2514–251910.1007/s11665-012-0318-9 ↗
5. L.C. Brinson, I. Schmidt, and R. Lammering, Stress-Induced Transformation Behavior of a Polycrystalline NiTi Shape Memory Alloy: Micro and Macromechanical Investigations Via In Situ Optical Microscopy, J. Mech. Phys. Solids, 2004, 52, p 1549–157110.1016/j.jmps.2004.01.001 ↗
6. T. Bormann, R. Schumacher, B. Müller, M. Mertmann, U. Pieles, and M. de Wild, Properties of NiTi-Structures Fabricated by Selective Laser Melting, eCells Mater. J., 2010, 20(Suppl. 1), p 13
7. H. Meier, C. Haberland, and J. Frenzel, Structural and functional properties of NiTi shape memory alloy produced by selective laser melting, in Innovative Developments in Design and Manufacturing: Advanced Research in Virtual and Rapid Prototyping, CRC Press-Taylor & Francis Group, London, 2012, p 291–296
8. T. Bormann, S. Friess, M. de Wild, R. Schumacher, G. Schulz, and B. Müller, Determination of Strain Fields in Porous Shape Memory Alloys Using Micro Computed Tomography, Proc. SPIE, 2010, 7804, p 78041M10.1117/12.861386 ↗
9. T. Bormann, M. de Wild, F. Beckmann, and B. Müller, Assessing the Morphology of Selective Laser Melted NiTi-Scaffolds for a Three-Dimensional Quantification of the One-Way Shape Memory Effect, Proc. SPIE, 2013, 8689, p 86891410.1117/12.2012245 ↗
10. T. Bormann, R. Schumacher, B. Müller, M. de Wild, Fabrication and characterization of anisotropic NiTi specimens for load-bearing implants, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20–24, 2013, Prague, Czech Republic, 2013, p 147–148
11. H. Kuchling, Taschenbuch der Physik, Verlag Harri Deutsch, Frankfurt am Main, Germany, 1984
12. H.C. Lin, S.K. Wu, and M.T. Yeh, Damping Characteristics of TiNi Shape Memory Alloys, Metal. Mater. Trans. A, 1993, 24, p 2189–219410.1007/BF02648593 ↗
13. Ausgewählte Eigenschaften von NiTi-Legierungen, Accessed on 25 November, 2013, http://www.memory-metalle.de/html/03_knowhow/PDF/MM_04_properties_d.pdf
14. D.E. Hudson, Internal Friction in Metals, Engineering and Applied Science, California Institute of Technology, Pasadena, CA, 1942
15. E.D. Brandnert, B.S. Shivaram, and A. Munier, Design and Fabrication of an Inverted Torsion Pendulum for Internal Friction Measurements, Meas. Sci. Technol., 1995, 6, p 310–31310.1088/0957-0233/6/3/009 ↗
16. Y. Liu and J. van Humbeeck, On the Damping Behaviour of NiTi Shape Memory Alloy, J. Phys. IV France, Supplément au Journal de Physique III, 7(Colloque C5), 1997, p 519–52410.1051/jp4:1997582 ↗
17. M. Kaack, Elastische Eigenschaften von NiTi-Formgedächtnis-Legierungen, Fakultät für Physik und Astronomie, Ruhr-Universität Bochum, Bochum, 2002
18. I. Schmidt, Untersuchung zur Dämpfungskapazität superelastischer Nickel-Titan-Formgedächtnislegierungen, Institut für Mechanik, Helmut Schmidt Universität, Hamburg, 2004
19. I. Schmidt and R. Lammering, Dynamisches Verhalten einer Superelastischen NiTi-Legierung, Technol. Mech., 2000, 20(1), p 51–60
20. J. van Humbeeck, Damping Properties of Shape Memory Alloys During Phase Transformation, J. Phys. IV, Supplément au Journal de Physique III, 6 (Colloque C8), 1996, p 371–38010.1051/jp4:1996880 ↗
21. Y. Liu and H. Yang, Strain Dependence of the Clausius-Clapeyron Relation for Thermoelastic Martensitic Transformations in NiTi, Smart Mater. Struct., 2007, 16, p S22–S2710.1088/0964-1726/16/1/S03 ↗
22. H. Soul, A. Isalgue, A. Yawny, V. Torra, and F.C. Lovey, Pseudoelastic Fatigue of NiTi Wires: Frequency and Size Effects on Damping Capacity, Smart Mater. Struct., 2010, 19(8), p 08500610.1088/0964-1726/19/8/085006 ↗
23. H. Yin and Q. Sun, Temperature Variation in NiTi Shape Memory Alloy During Cyclic Phase Transition, J. Mater. Eng. Perform., 2012, 21(12), p 2505–250810.1007/s11665-012-0395-9 ↗
24. T. Bormann, R. Schumacher, B. Müller and M. de Wild, From Powder to Complex-Shaped NiTi Structures by Selective Laser Melting, Euro PM2012 Proceedings, 1, 2012, p 193–197
25. T. Waitz, W. Pranger, T. Antretter, F.D. Fischer, and H.P. Karnthaler, Competing Accommodation Mechanisms of the Martensite in Nanocrystalline NiTi Shape Memory Alloys, Mater. Sci. Eng. A: Struct. Mater. Prop. Microstruct. Process., 2008, 481–482, p 479–48310.1016/j.msea.2007.03.122 ↗
26. J. Frenzel, E.P. George, A. Dlouhy, C. Somsen, M.F.-X. Wagner, and G. Eggeler, Influence of Ni on Martensitic Phase Transformations in NiTi Shape Memory Alloys, Acta Mater., 2010, 58, p 3444–345810.1016/j.actamat.2010.02.019 ↗
27. K.N. Melton and O. Mercier, The Mechanical Properties of NiTi-Based Shape Memory Alloys, Acta Metal., 1981, 29(2), p 393–39810.1016/0001-6160(81)90165-6 ↗
28. Y. Liu and H. Xiang, Apparent Modulus of Elasticity of Near-Equiatomic NiTi, J. Alloys Compd., 1998, 270, p 154–15910.1016/S0925-8388(98)00500-3 ↗
29. P. Šittner, L. Heller, J. Pilch, C. Curfs, T. Alonso and D. Favier, Young’s Modulus of Austenite and Martensite Phases in Superelastic NiTi Wires, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20–24, 2013, Prague, Czech Republic., 2013, p 37–38
30. S. Rajagopalan, A.L. Little, M.A.M. Bourke, and R. Vaidyanathan, Elastic Modulus of Shape-Memory NiTi from In Situ Neutron Diffraction During Macroscopic Loading, Instrumented Indentation, And Extensometry, Appl. Phys. Lett., 2005, 86, p 08190110.1063/1.1863437 ↗
31. S. Qiu, B. Clausen, S.A. Padula, R.D. Noebe, and R. Vaidyanathan, On Elastic Moduli and Elastic Anisotropy in Polycrystalline Martensitic NiTi, Acta Mater., 2011, 59, p 5055–506610.1016/j.actamat.2011.04.018 ↗