A Modified Mechanical Threshold Stress Constitutive Model for Austenitic Stainless Steels
Source abstract
Abstract
This paper presents a modified mechanical threshold stress (m-MTS) constitutive model. The m-MTS model incorporates variable athermal and dynamic strain aging (DSA) Components to accurately predict the flow stress behavior of austenitic stainless steels (ASS)-316 and 304. Under strain rate variations between 0.01-0.0001 s−1, uniaxial tensile tests were conducted at temperatures ranging from 50-650 °C to evaluate the material constants of constitutive models. The test results revealed the high dependence of flow stress on strain, strain rate and temperature. In addition, it was observed that DSA occurred at elevated temperatures and very low strain rates, causing an increase in flow stress. While the original MTS model is capable of predicting the flow stress behavior for ASS, statistical parameters point out the inefficiency of the model when compared to other models such as Johnson Cook model, modified Zerilli-Armstrong (m-ZA) model, and modified Arrhenius-type equations (m-Arr). Therefore, in order to accurately model both the DSA and non-DSA regimes, the original MTS model was modified by incorporating variable athermal and DSA components. The suitability of the m-MTS model was assessed by comparing the statistical parameters. It was observed that the m-MTS model was highly accurate for the DSA regime when compared to the existing models. However, models like m-ZA and m-Arr showed better results for the non-DSA regime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. X.Y. Wang and D.Y. Li, Mechanical, Electrochemical and Tribological Properties of Nano-Crystalline Surface of 304 Stainless Steel, Wear, 2003, 255, p 836–84510.1016/S0043-1648(03)00055-3 ↗
2. A.K. Gupta, H.N. Krishnamurthy, Y. Singh, K.M. Prasad, and S.K. Singh, Development of Constitutive Models for Dynamic Strain Aging Regime in Austenitic Stainless Steel 304, Mater. Des., 2013, 45, p 616–62710.1016/j.matdes.2012.09.041 ↗
3. A.K. Gupta, V.K. Anirudh, and S.K. Singh, Constitutive Models to Predict Flow Stress in Austenitic Stainless Steel 316 at Elevated Temperatures, Mater. Des., 2013, 43, p 410–41810.1016/j.matdes.2012.07.008 ↗
4. A. Toppo, M.G. Pujar, C. Mallika, U. Kamachi Mudali, and R.K. Dayal, Effect of Nitrogen on Stress Corrosion Behavior of Austenitic Stainless Steels Using Electrochemical Noise Technique, J. Mater. Eng. Perform., 2015, 24, p 1140–114910.1007/s11665-014-1381-1 ↗
5. T. Kawasaki and K. Mori, A Method of Determining Flow Stress Under Forming Conditions, CIRP Ann. Technol., 1981, 30, p 135–13810.1016/S0007-8506(07)60910-X ↗
6. M.Y. Demeri, Drawbeads in Sheet Metal Forming, J. Mater. Eng. Perform., 1993, 2, p 863–86610.1007/BF02645686 ↗
7. Y.C. Lin and X.-M. Chen, A Critical Review of Experimental Results and Constitutive Descriptions for Metals and Alloys in Hot Working, Mater. Des., 2011, 32, p 1733–175910.1016/j.matdes.2010.11.048 ↗
8. J. Hyun, J. Hoon, and R.H. Wagoner, A plastic Constitutive Equation Incorporating Strain, Strain-Rate, and Temperature, Int. J. Plast., 2010, 26, p 1746–177110.1016/j.ijplas.2010.02.005 ↗
9. H. Ying, X. Feng, J. Ying, and J. Jiao, A Modified Johnson Cook Model for Elevated Temperature Flow Behavior of T24 Steel, Mater. Sci. Eng. A, 2013, 577, p 138–14610.1016/j.msea.2013.04.041 ↗
10. G. Ji, F. Li, Q. Li, H. Li, and Z. Li, A Comparative Study on Arrhenius-Type Constitutive Model and Artificial Neural Network Model to Predict High-Temperature Deformation Behaviour in Aermet100 Steel, Mater. Sci. Eng. A, 2011, 528, p 4774–478210.1016/j.msea.2011.03.017 ↗
11. H. Li, X. Wang, D. Wei, J. Hu, and Y. Li, A Comparative Study on Modified Zerilli–Armstrong, Arrhenius-Type and Artificial Neural Network Models to Predict High-Temperature Deformation Behavior in T24 Steel, Mater. Sci. Eng. A, 2012, 536, p 216–22210.1016/j.msea.2011.12.108 ↗
12. K.S. Prasad and A.K. Gupta, A Constitutive Description to Predict High-Temperature Flow Stress in Austenitic Stainless Steel 316, Procedia Mater. Sci., 2014, 6, p 347–35310.1016/j.mspro.2014.07.044 ↗
13. B. Banerjee, The Mechanical Threshold Stress Model for Various Tempers of AISI, 4340 Steel, Int. J. Solids Struct., 2007, 44, p 834–85910.1016/j.ijsolstr.2006.05.022 ↗
14. F.J. Zerilli and R.W. Armstrong, Dislocation-Mechanics-Based Constitutive Relations for Material Dynamics Calculations, J. Appl. Phys., 1987, 61, p 1816–182510.1063/1.338024 ↗
15. S. Nemat-Nasser and J.B. Isaacs, Direct Measurement of Isothermal Flow Stress of Metals at Elevated Temperatures and High Strain Rates with Application to Ta and TaW Alloys, Acta Mater., 1997, 45, p 907–91910.1016/S1359-6454(96)00243-1 ↗
16. S. Nemat-Nasser and W.G. Guo, Thermomechanical Response of HSLA-65 Steel Plates: Experiments and Modeling, Mech. Mater., 2005, 37, p 379–40510.1016/j.mechmat.2003.08.017 ↗
17. P.S. Follansbee and U.F. Kocks, A Constitutive Description of Copper Based on the Use of the Mechanical Threshold Stress as an Internal State Variable, Acta Mater., 1998, 36, p 81–9310.1016/0001-6160(88)90030-2 ↗
18. J. Luo, M. Li, X. Li, and Y. Shi, Constitutive Model for High Temperature Deformation of Titanium Alloys Using Internal State Variables, Mech. Mater., 2010, 42, p 157–16510.1016/j.mechmat.2009.10.004 ↗
19. F.H. Abed, Constitutive Modeling of the Mechanical Behavior of High Strength Ferritic Steels for Static and Dynamic Applications, Mech. Time Depend. Mater., 2010, 14, p 329–34510.1007/s11043-010-9112-y ↗
20. A.F. Armas, O.R. Bettin, I. Alvarez-Armas, and G.H. Rubiolo, Strain Aging Effects on the Cyclic Behavior of Austenitic Stainless Steels, J. Nucl. Mater., 1988, 155, p 644–64910.1016/0022-3115(88)90388-1 ↗
21. K. Peng, K. Qian, and W. Chen, Effect of Dynamic Strain Aging on High Temperature Properties of Austenitic Stainless Steel, Mater. Sci. Eng. A, 2004, 379, p 372–37710.1016/j.msea.2004.03.004 ↗
22. N. Kotkunde, H. Nitin, P. Puranik, and A. Kumar, Microstructure Study and Constitutive Modeling of Ti–6Al–4V Alloy at Elevated Temperatures, J. Mater. Des., 2014, 54, p 96–10310.1016/j.matdes.2013.08.006 ↗
23. C.C. Tasan, J.P.M. Hoefnagels, and M.G.D. Geers, A Brittle-Fracture Methodology for Three-Dimensional Visualization of Ductile Deformation Micromechanisms, Scr. Mater., 2009, 61, p 20–2310.1016/j.scriptamat.2009.02.049 ↗
24. D.M. Goto, R.K. Garrett, J.F. Bingert, S.R. Chen, and G.T. Gray, The Mechanical Threshold Stress Constitutive-Strength Model Description of HY-100 Steel, Metall. Mater. Trans. A, 2000, 31, p 1985–199610.1007/s11661-000-0226-8 ↗
25. M.L. Newman, B.J. Robinson, H. Sehitoglu, and J.A. Dantzig, Deformation, Residual Stress, and Constitutive Relations for Quenched W319 Aluminum, Metall. Mater. Trans. A, 2003, 34, p 1483–149110.1007/s11661-003-0260-4 ↗
26. A. Rusinek and J.R. Klepaczko, Shear Testing of a Sheet Steel at Wide Range of Strain Rates and a Constitutive Relation with Strain-Rate and Temperature Dependence of the Flow Stress, Int. J. Plast., 2001, 17, p 87–11510.1016/S0749-6419(00)00020-6 ↗
27. A. Rusinek and J.A. Rodriguez-Martinez, Thermo-Viscoplastic Constitutive Relation for Aluminium Alloys, Modeling of Negative Strain Rate Sensitivity and Viscous Drag Effects, Mater. Des., 2009, 30, p 4377–439010.1016/j.matdes.2009.04.011 ↗
28. P.S. Follansbee, An Internal State Variable Constitutive Model Describing Metal Deformation, Mater. Sci. Appl., 2014, 05, p 603–609
29. T. Noriyuki, M. Hideaki, T. Yo, U. Osamu, and N. Kotobu, Description of Stress–Strain Curves Based on Thermal Activation Models for a Ti–Fe–O Alloy at 77–296 K with Strain Rates from 10−9–10−2 s−1, ISIJ Int., 2000, 40, p 84–9010.2355/isijinternational.40.84 ↗
30. D.H. Lassila, A. Goldberg, and R. Becker, The Effect of Grain Boundaries on the Athermal Stress of Tantalum and Tantalum–Tungsten Alloys, Metall. Mater. Trans. A, 2002, 33, p 3457–346410.1007/s11661-002-0333-9 ↗
31. W.F. Kocks, Thermodynamics and Kinetics of Slip, Progr. Mater. Sci., 1975, 19, p 291
32. W.-G. Guo and X. Gao, On the Constitutive Modeling of a Structural Steel Over a Range of Strain Rates and Temperatures, Mater. Sci. Eng. A, 2013, 561, p 468–47610.1016/j.msea.2012.10.065 ↗
33. S. Abdel-Malek, and L.W. Meyer, Deformation and Ductile Fracture of a Low Alloy Steel under High Strain Rate Loading, International Conference on High Speed Forming, 2006, p 41–48
34. V. Sainath, M.V. Sukesh, and A.K. Gupta, Flow stress prediction in Austenitic Stainless Steel 304 at elevated temperatures, Int. Conf. Mater. Process. Charact., 2012
35. Y. Singh, H.N. Krishnamurthy, A.K. Gupta, and S.K. Singh, A Comparative Study of Constitutive Models to Predict Flow Stress Behavior in Dynamic Strain Aging Regime of Austenitic Stainless Steel 316, Annu. Int. Conf. Mater. Sci. Met. Manuf., 2012, 2, p 98