Cut Front Geometry Characterization in Cutting Applications of Brass with Abrasive Water Jet
Source abstract
Abstract
Abrasive water jet (AWJ) cutting is an advanced manufacturing process for machining hard to cut materials. In this study, brass-353 samples of different thicknesses were cut by AWJ using different feed rates to identify the relationships between depth of cut (material thickness), feed rate, and deflection of cutting edge geometry. The effects of material thickness on the AWJ cut surface roughness were investigated and discussed. Deflection of cutting edge geometry in AWJ cutting process was assessed. Cutting edge geometry was characterized by analyzing the surface properties of cut samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · High-Temperature Coating Behaviors · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A. Akkurt, “Çesitli Malzemelerin Asındırıcı Su Jeti Ile Kesilmesinde Yüzey Özellikleri, Sertlik ve Mikro yapı Değisimlerinin Farklı Kesme Yöntemleriyle Karsılastırmalı Olarak Incelenmesi,” Doktora Tezi, G.Ü. Fen Bilimleri Enstitüsü, Ankara, 2002, s 50–62
2. Hashish, M., 1991. Optimization Factors in Abrasive-Waterjet Machining, J. Eng. Ind. 113, 132-139.10.1115/1.2899619 ↗
3. H.J. Warnecke and M. Schlatter, Treatment of Materials with High Pressure Water Jets, E330, Vol. 60 (Stuttgart, Germany), 1984, p 189–201
4. W. Hunziker, Water-Jet Cutting, Bqstronic Lazer AG, Niederönz, Switzerland, 1990, p 12–17
5. F. Richard, Waterjet Machining in Relationship to Design Engineering for Manufacturability, Hydro-Abrasive Machining, Los Angeles, CA, 1992, p 60–67
6. A.W. Momber, R. Kovacevic, R. Schüneman, et al., The Influence of Abrasive Grain Size Distribution Parameters on the Abrasive Water Jet Machining Process, Proceedings of the 25th NAMRI Conference, K.P. Rajukar, Ed. (Dearborn, MI), Society of Manufacturing Engineers, 1996, p 21–26
7. M. Hashish, Precision Machining with Abrasive Water Jets, Proceedings of the 6th American Water Jet Conference (Houston, TX), 1991, pp 20–32
8. L. Ohlsson, J. Powell, and C. Magnusson, Mechanisms of Striation Formation in Abrasive Waterjet Cutting, Proceedings of the 12th International Conference On Jet Cutting Technology, Oct 25–27, 1994 (Rouen, France), 1994, p 151–164
9. A. Momber, A Simplified Mathematical Energy Dissipation Model for Water Jet and Abrasive Water Jet Cutting Processes, 8th American Water Jet Conference, Aug 26–29, 1991 (Houston, TX), 1991, p 829–843
10. A. Momber and R. Kovacevic, Calculation of Exit Jet Energy in Abrasive Water Jet Cutting, Manufacturing Science and Engineering, ASME, New York, 1994, p 361–366
11. M. Hashish, Prediction Models for AWJ Machining Operations, 7th American Water Jet Conference, Aug 28–31, 1993 (Seattle, WA), 1993, p 205–216
12. J. Chao and E. Geskin, Experimental Study of the Striation Formation and Spectral Analysis of the Abrasive Waterjet Generated Surfaces, 7th American Water Jet Conference, Aug 28–31, 1993 (Seattle, WA), 1993, p 27–41
13. Wang, J., Wong, W.C.K., A Study of Abrasive Waterjet Cutting of Metallic Coated Sheet Steels, Int. J. Mach. Tools Manuf. 39 (1999) 855–87010.1016/S0890-6955(98)00078-9 ↗
14. L.M. Hlaváča, I.M. Hlaváčová, L. Gembalová, et al., Experimental Method for Investigation of the Abrasive Water Jet Cutting Quality, J. Mater. Process. Technol., 2009. doi: 10.1016/j.jmatprotec.2009.04.011 .10.1016/j.jmatprotec.2009.04.011 ↗
15. Hascalik, A., Çaydaş, U., Gürün, H., Effect of Traverse Speed on Abrasive Waterjet Machining of Ti–6Al–4 V Alloy, Mater. Des. 28 (2007) 1953–195710.1016/j.matdes.2006.04.020 ↗
16. Momber, A., 1993. Handbuch druckwasserstrahl-technik, Beton Verlag GmbH, Düsseldorf, pp. 26–34.
17. M. Niu, Y. Fukunishi, and T. Sawamura, Control of Striated Roughness on the Surface Cut by Abrasive Water Jet, BHR Group Jetting Technology, Ishinomaki Senshu University, Japan, 1996, p 769–777
18. P.L. Singh, W.L. Chen, and I. Munoz, Comprehensive Evaluation of Abrasive Waterjet Cut Surface Quality, 6th American Water Jet Conference, Aug 26–27, 1991 (Houston, TX), 1991, p 139–161
19. Murugesh, L., Srinivasan, S., Scattergood, R. O., 1991. Models and Materials Properties for Erosion of Ceramics, J. Mater. Eng. 13/11, 55-61.10.1007/BF02834124 ↗
20. S.L. Engel and T.J. Labus, Industrial Applications and Comparison of Laser and Abrasive Waterjet Technologies, Fluid Jet Technology – Fundamentals and Applications, 2nd ed., WJTA, St. Louis, 1993, p 12–18
21. A. Akkurt., 2005. Effect of Cutting Speed on Surface Roughness in AWJ Cutting Applications of Commercial Pure Aluminum and Al-6061 Aluminum Alloy, J. Polytech., 8/1, 69-79.
22. Y. Fukunishi, R. Kobayashi, and K. Uchida, Numerical Simulation of Striation on Water Jet Cutting Surface, Proceedings of 8th American Water Jet Conference, Aug 26–29, 1995 (Houston, TX), 1995, p 157–169
23. J. Zeng, R. Hines, and T.J. Kim, Characterization of Energy Dissipation Phenomena in Abrasive Water Jet Cutting, Proceedings of the 6th American Water Jet Conference, Aug 26–27, 1991 (Houston, TX), Water Jet Technology Association, 1991, p 163–177
24. D.K.M. Tan, A Model for the Surface Finish in Abrasive Waterjet Cutting, Proceedings of 8th International Symposium on Jet Cutting Technology (Durham, England), 1986, p 31–38
25. M. Hashish, Steel Cutting with Abrasive Water Jets, Proceedings of 6th International Symposium on Jet Cutting Technology, University of Surrey, UK, 1982, Paper K3
26. Guo, N. S., Louis, H., Meier, G, et al. 1992. Recycling Capability of Abrasive Water Jet Cutting. In: Lichtarowicz A (Eds.), Jet Cutting Technology. Kluwer Academic Publishers, Dordrecht, pp. 503-523.10.1007/978-94-011-2678-6_34 ↗
27. Kovacevic, R., 1991. Surface Texture in Abrasive Waterjet Cutting, J. Manuf. Syst., 10/1, 32-40.10.1016/0278-6125(91)90045-4 ↗
28. Liu, B. L., Shang, Y., Yao, H., et al. 1992. The Recent Premajet Advance in Cutting and Derusting Technology. In: Lichtarowicz A (Eds) Jet Cutting Technology, Kluwer Academic Publishers, Dordrecht, pp. 451-460.10.1007/978-94-011-2678-6_31 ↗
29. Chen, W. L., Geskin, E. S., 1991. Measurements of the Velocity of Abrasive Waterjet by the Use of Laser Transit Anemometer. In: Saunders D. (Eds), Jet Cutting Technology, Elsevier, London, pp 23.
30. Nakamura, H., Nazaraki, T., Yanagihara, S., 1989. Cutting Technique and System for Biological Shield. Nucl. Technol. 86, 168-178.10.13182/NT89-A34267 ↗
31. M. Mozurkiwicz, L. Fincuan, and R. Ferguson, Investigation of Abrasive Cutting Head Internal Parameters, Proceedings of the 9th International Symposium on Jet Cutting Technology, P.A. Woods, Ed., BHRA Fluid Engineering, Cranfield, England, 1988, p 34–37
32. Hashish, M., 1988. Visualization of the Abrasive-Waterjet Cutting Process, Exp. Mech., 28/2, 159-169.10.1007/BF02317567 ↗
33. Kovacevic, R., Mohan, R., and Beardsley, H.E., Monitoring of Thermal Energy Distribution in Abrasive Waterjet Cutting Using Infrared Thermography, ASME J. Manuf. Sci. Eng., 118 (4), 1996, pp. 555-56310.1115/1.2831067 ↗
34. A.W. Momber, R. Kovacevic, R. Kwak, and R. Mohan, Experimental Estimation of Energy Dissipative Processes in Work Pieces During Abrasive Water Jet Cutting, 8th American Water Jet Conference, Aug 26–29, 1995 (Houston, TX), 1995, p 26–29
35. Momber. A., 1994, Schneidversuche an stahlbeton mit dem abrasivdruckwasserstrahlen, On und Stahlbetonbau. 89, 132-13410.1002/best.199400220 ↗