Linear Friction Welding Process Model for Carpenter Custom 465 Precipitation-Hardened Martensitic Stainless Steel
Source abstract
Abstract
An Arbitrary Lagrangian-Eulerian finite-element analysis is combined with thermo-mechanical material constitutive models for Carpenter Custom 465 precipitation-hardened martensitic stainless steel to develop a linear friction welding (LFW) process model for this material. The main effort was directed toward developing reliable material constitutive models for Carpenter Custom 465 and toward improving functional relations and parameterization of the workpiece/workpiece contact-interaction models. The LFW process model is then used to predict thermo-mechanical response of Carpenter Custom 465 during LFW. Specifically, temporal evolutions and spatial distribution of temperature within, and expulsion of the workpiece material from, the weld region are examined as a function of the basic LFW process parameters, i.e., (a) contact-pressure history, (b) reciprocation frequency, and (c) reciprocation amplitude. Examination of the results obtained clearly revealed the presence of three zones within the weld, i.e., (a) Contact-interface region, (b) Thermo-mechanically affected zone, and (c) heat-affected zone. While there are no publicly available reports related to Carpenter Custom 465 LFW behavior, to allow an experiment/computation comparison, these findings are consistent with the results of our ongoing companion experimental investigation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Mechanical stress and fatigue analysis · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A. Vairis and M. Frost, High Frequency Linear Friction Welding of a Titanium Alloy, Wear, 1998, 217, p 117–13110.1016/S0043-1648(98)00145-8 ↗
2. A. Vairis and M. Frost, On the Extrusion Stage of Linear Friction Welding of Ti-6Al-4 V, J. Mater. Sci. Eng. A, 1999, 271, p 477–48410.1016/S0921-5093(99)00449-9 ↗
3. A. Vairis and M. Frost, Modeling the Linear Friction Welding of Titanium Blocks, J. Mater. Sci. Eng. A, 2000, 292, p 8–1710.1016/S0921-5093(00)01036-4 ↗
4. M. Corzo, Y. Torres, M. Anglada, and A. Mateo, Fracture Behaviour of Linear Friction Welds in Titanium Alloys, Anales de la Mecánica de Fractura, 2007, 1, p 75–80
5. O. Roder, J.-P. Ferte, E. Gach, J. Mendez, M. Anglada, and A. Mateo, Development and Validation of a Dual Titanium Alloy Dual Microstructure BLISK, Fifth Aeronautic Days 2006, Vienna, Austria, June 2006
6. P. Wanjara and M. Jahazi, Linear Friction Welding of Ti-6Al-4 V: Processing, Microstructure, and Mechanical-Property Inter-Relationships, Metall. Mater. Trans. A, 2005, 36, p 2149–216410.1007/s11661-005-0335-5 ↗
7. W.Y. Li, T.J. Ma, Y. Zhang, Q.Z. Xu, J.L. Li, S.Q. Yang, and H.L. Liao, Microstructure Characterization and Mechanical Properties of Linear Friction Welded Ti-6Al-4 V Alloy, Adv. Eng. Mater., 2008, 10, p 89–9210.1002/adem.200700034 ↗
8. M. Karadge, M. Preuss, C. Lovell, P.J. Withers, and S. Bray, Texture Development in Ti-6Al-4 V Linear Friction Welds, J. Mater. Sci. Eng. A, 2007, 459, p 182–19110.1016/j.msea.2006.12.095 ↗
9. M. Karadge, M. Preuss, P.J. Withers, and S. Bray, Importance of Crystal Orientation in Linear Friction Joining of Single Crystal to Polycrystalline Nickel-Based Superalloys, J. Mater. Sci. Eng. A, 2008, 491, p 446–45310.1016/j.msea.2008.04.064 ↗
10. W.Y. Li, T.J. Ma, Q.Z. Xu, S.Q. Yang, Y. Zhang, J.L. Li, and H.L. Liao, Effect of Friction Time on Flash Shape and Axial Shortening of Linear Friction Welded 45 Steel, Mater. Lett., 2008, 62, p 293–29610.1016/j.matlet.2007.05.037 ↗
11. T.J. Ma, W.Y. Li, Q.Z. Xu, Y. Zhang, J.L. Li, S.Q. Yang, and H.L. Liao, Microstructure Evolution and Mechanical Properties of Linear Friction Welded 45 Steel Joint, Adv. Eng. Mater., 2007, 9, p 703–70710.1002/adem.200700090 ↗
12. P. Threadgill, Linear Friction Welding, TWI, Knowledge Summary, The Welding Institute, UK, 2008
13. I. Bhamji, M. Preuss, P.L. Threadgill, R.J. Moat, A.C. Addison, and M.J. Peel, Linear Friction Welding of AISI, 316L Stainless Steel, Mater. Sci. Eng. A, 2010, 528, p 680–69010.1016/j.msea.2010.09.043 ↗
14. L. D’Alvise, E. Massoni, and S.J. Walløe, Finite Element Modeling of the Inertia Friction Welding Process Between Dissimilar Materials, J. Mater. Process. Technol., 2002, 125-126, p 387–39110.1016/S0924-0136(02)00349-7 ↗
15. J. Sorina-Müller, M. Rettenmayr, D. Schneefeld, O. Roder, and W. Fried, FEM Simulation of the Linear Friction Welding of Titanium Alloys, Comput. Mater. Sci., 2010, 48, p 749–75810.1016/j.commatsci.2010.03.026 ↗
16. M. Grujicic, A. Arakere, B. Pandurangan, C.-.F. Yen, and B.A. Cheeseman, Process Modeling of Ti-6Al-4 V Linear Friction Welding (LFW), J. Mater. Eng. Perform., 2012, 21, p 2011–202310.1007/s11665-011-0097-8 ↗
17. A. Midha and D.E. Wert, “Custom 465 Stainless Sees Increased Use in a Wide Array of New and Existing Applications,” http://www.cartech.com/news.aspx?id=4262 . Accessed on January 29, 2014
18. M. Grujicic, S. Tangrila, B.O. Cavin, W.D. Porter, and C.R. Hubbard, Effect of Iron Additions on Structure of Laves Phases in Nb-Cr-Fe Alloys, Mater. Sci. Eng., 1993, A160, p 37–4810.1016/0921-5093(93)90495-Z ↗
19. Technical datasheet for Carpenter Custom 465, http://cartech.ides.com/datasheet.aspx?I=101&E=55 . Accessed on Jan 29, 2014
20. M. Grujicic, G. Arakere, B. Pandurangan, A. Hariharan, C.-F. Yen, B.A. Cheeseman, and C. Fountzoulas, Statistical Analysis of High-Cycle Fatigue Behavior of Friction Stir Welded AA5083-H321, J. Mater. Eng. Perform., 2011, 20, p 855–86410.1007/s11665-010-9725-y ↗
21. M. Grujicic, G. Arakere, A. Hariharan, and B. Pandurangan, A Concurrent Product-Development Approach for Friction-Stir Welded Vehicle-Underbody Structures, J. Mater. Eng. Perform., 2012, 21, p 437–44910.1007/s11665-011-9955-7 ↗
22. M. Grujicic, G. Arakere, A. Hariharan, and B. Pandurangan, Two-Level Weld-Material Homogenization Approach for Efficient Computational Analysis of Welded Structure Blast Survivability, J. Mater. Eng. Perform., 2012, 21, p 786–79610.1007/s11665-011-9876-5 ↗
23. M. Grujicic, G. Arakere, B. Pandurangan, J.M. Ochterbeck, C.-.F. Yen, B.A. Cheeseman, A.P. Reynolds, and M.A. Sutton, Computational Analysis of Material Flow During Friction Stir Welding of AA5059 Aluminum Alloys, J. Mater. Eng. Perform., 2012, 21, p 1824–184010.1007/s11665-011-0069-z ↗
24. M. Grujicic, B. Pandurangan, C.-F. Yen, and B.A. Cheeseman, Modifications in the AA5083 Johnson-Cook Material Model for Use in Friction Stir Welding Computational Analyses, J. Mater. Eng. Perform., 2012, 21, p 2207–221710.1007/s11665-011-0118-7 ↗
25. M. Grujicic, B. Pandurangan, A. Arakere, C.-F. Yen, and B.A. Cheeseman, Friction Stir Weld Failure Mechanisms in Aluminum-Armor Structures under Ballistic Impact Loading Conditions, J. Mater. Eng. Perform., 2013, 22, p 30–4010.1007/s11665-012-0239-7 ↗
26. M. Grujicic, S. Ramaswami, J.S. Snipes, R. Yavari, A. Arakere, C.-F. Yen, and B.A. Cheeseman, Computational Modeling of Microstructure Evolution in AISI1005 Steel during Gas Metal Arc Butt Welding, J. Mater. Eng. Perform., 2012, 22, p 1209–122210.1007/s11665-012-0402-1 ↗
27. M. Grujicic, A. Arakere, S. Ramaswami, J.S. Snipes, R. Yavari, C.-F. Yen, B.A. Cheeseman, and J.S. Montgomery, Gas Metal Arc Welding Process Modeling and Prediction of Weld Microstructure in MIL A46100 Armor-Grade Martensitic Steel, J. Mater. Eng. Perform., 2013, 22, p 1541–155710.1007/s11665-012-0445-3 ↗
28. M. Grujicic, S. Ramaswami, J.S. Snipes, C.-F. Yen, B.A. Cheeseman, and J.S. Montgomery, Multi-Physics Modeling and Simulations of MIL A46100 Armor-Grade Martensitic Steel Gas Metal Arc Welding Process, J. Mater. Eng. Perform., 2013, 22, p 2950–296910.1007/s11665-013-0583-2 ↗
29. M. Awang, V. Mucino, Z. Feng, and S. David, Thermo-Mechanical Modeling of Friction Stir Spot Welding (FSSW), SAE Technical Paper 2006-01-1392, 2006, doi: 10.4271/2006-01-139210.4271/2006-01-1392 ↗
30. S.J. Na, J. Ruge, and K. Thomas, Temperature Determination During the Friction Welding of Dissimilar Materials in Cylindrical Form-Measurement and Calculation, Schweiss. Schneid., 1984, 36, p E43–E45
31. M. Grujicic, C.L. Zhao, and E.C. Dusel, The Effect of Thermal Contact Resistance on Heat Management in the Electronic Packaging, Appl. Surf. Sci., 2005, 246, p 290–30210.1016/j.apsusc.2004.11.030 ↗
32. http://www.thermalengineer.com/library/ContactResistanceConcept.htm . Accessed on January 29, 2014
33. ABAQUS Version 6.10-EF1, User Documentation, Dassault Systèmes, 2010
34. G. R. Johnson and W. H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures, Proceedings of the 7th International Symposium on Ballistics, 1983
35. British Stainless Steel Association, Elevated temperature physical properties of stainless steels, http://www.bssa.org.uk/topics.php?article=139 . Accessed on January 29, 2014
36. K. Park, Development and Analysis of Ultrasonic Assisted Friction Stir Welding Process, Ph.D. dissertation, University of Michigan, 2009
37. W.S. Owen and M. Grujicic, Plastic Deformation: Thermally Activated Glide of Dislocations, Encyclopedia of Materials Science and Engineering, Pergamon Press, Oxford, England, p 3540–3543, 1986
38. M. Grujicic, G.B. Olson, and W.S. Owen, Kinetics of Martensitic Interface Motion, ICOMAT-82 (International Conference on Martensitic Transformations), J. Phys. Colloques, 1982, 43, p C4-173–C4-17810.1051/jphyscol:1982420 ↗
39. M. Grujicic, I.J. Wang, and W.S. Owen, Precipitate/Austenite Equilibrium in a Titanium-Niobium Ultra-low Carbon Steel, Calphad, 1986, 10, p 117–12810.1016/0364-5916(86)90016-7 ↗
40. M. Grujicic, The Core Structure of a/2<110> Screw Dislocations in Fe-Ni-Cr-N Austenite, Mater. Sci. Eng. A, 1994, 183, p 223–23210.1016/0921-5093(94)90906-7 ↗
41. M. Grujicic and J. Du, Atomistic Simulations of Transformation Toughening in Fe-Ni Austenite, Modelling Simul. Mater. Sci. Eng., 1995, 3, p 811–82810.1088/0965-0393/3/6/005 ↗