The Mechanical Properties and Corrosion Behavior of Double-Layered Nano Hydroxyapatite-Polymer Coating on Mg-Ca Alloy
Source abstract
Abstract
Nano-hydroxyapatite (HA)/poly(e-caprolactone) (PCL) coatings with thickness of about 45-55 μm were prepared on the surface of a Mg-Ca alloy by a combination of electrochemical deposition and dip-coating methods. The results indicate that incorporation of nano-HA as an inner layer affects the porosity of the PCL-coated layer as top layer and enhances the corrosion resistance of Mg-Ca alloys. The nano-HA/PCL-coated samples showed higher R p (823.1 kΩ cm2) and lower i corr (5.85E−2 µA/cm2) compared with uncoated. Significant enhancement in the compressive strength was observed in the both nano-HA/PCL and PCL compared with uncoated samples after 10 days immersion in SBF.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. M. Yazdimamaghani, M. Razavi, D. Vashaee, and L. Tayebi, Surface Modification of Biodegradable Porous Mg Bone Scaffold Using Polycaprolactone/Bioactive Glass Composite, Mater. Sci. Eng., C, 2015, 49, p 436–44410.1016/j.msec.2015.01.041 ↗
2. H.R. Bakhsheshi-Rad, M.R. Abdul-Kadir, M.H. Idris, and S. Farahany, Relationship Between the Corrosion Behavior and the Thermal Characteristics and Microstructure of Mg-0.5Ca-xZn Alloys, Corros. Sci., 2012, 64, p 184–19710.1016/j.corsci.2012.07.015 ↗
3. J. Zhou, Q. Li, H. Zhang, and F. Chen, Corrosion Behavior of AZ91D Magnesium Alloy in Three Different Physiological Environments, J. Mater. Eng. Perform., 2014, 23, p 181–18610.1007/s11665-013-0751-4 ↗
4. N.G. Wang, R.C. Wang, C.Q. Peng, and Y. Feng, Corrosion Behavior of Magnesium Alloy AP65 in 3.5 % Sodium Chloride Solution, J. Mater. Eng. Perform., 2012, 21, p 1300–130810.1007/s11665-011-0035-9 ↗
5. P. Shi, B. Niu, E. Shanshan, Y. Chen, and Q. Li, Preparation and Characterization of PLA Coating and PLA/MAO Composite Coatings on AZ31 Magnesium Alloy for Improvement of Corrosion Resistance, Surf. Coat. Technol., 2015, 262, p 26–3210.1016/j.surfcoat.2014.11.069 ↗
6. Z.J. Jia, M. Li, Q. Liu, X.C. Xu, Y. Cheng, Y.F. Zheng, T.F. Xi, and S.C. Wei, Micro-arc Oxidization of a Novel Mg-1Ca Alloy in Three Alkaline KF Electrolytes: Corrosion Resistance and Cytotoxicity, Appl. Surf. Sci., 2014, 292, p 1030–103910.1016/j.apsusc.2013.11.038 ↗
7. E. Ghali, W. Dietzel, and K.U. Kainer, General and Localized Corrosion of Magnesium Alloys: A Critical Review, J. Mater. Eng. Perform., 2013, 22, p 2875–289110.1007/s11665-013-0730-9 ↗
8. H.R. Bakhsheshi-Rad, E. Hamzah, S. Farahany, and M. Staiger, The Mechanical Properties and Corrosion Behavior of Quaternary Mg-6Zn-0.8Mn-xCa Alloys, J. Mater. Eng. Perform., 2015, 24, p 598–60810.1007/s11665-014-1271-6 ↗
9. M.C. Lopes de Oliveira, V.S. Marques Pereira, O.V. Correa, and R.A. Antunes, Corrosion Performance of Anodized AZ91D Magnesium Alloy: Effect of the Anodizing Potential on the Film Structure and Corrosion Behavior, J. Mater. Eng. Perform., 2014, 23, p 593–60310.1007/s11665-013-0755-0 ↗
10. H.R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, M.A.M. Yajid, and M. Medraj, Fabrication and Corrosion Behavior of Si/HA Nano-composite Coatings on Biodegradable Mg-Zn-Mn-Ca Alloy, Surf. Coat. Technol., 2014, 258, p 1090–109910.1016/j.surfcoat.2014.07.025 ↗
11. Y. Huang, Y. Yan, and X. Pang, Electrolytic Deposition of Fluorine-Doped Hydroxyapatite/ZrO2 Films on Titanium for Biomedical Applications, Ceram. Int., 2013, 39, p 245–25310.1016/j.ceramint.2012.06.017 ↗
12. M. Razavi, M. Fathi, O. Savabi, B. Hashemi Beni, D. Vashaee, and L. Tayebi, Nanostructured Merwinite Bioceramic Coating on Mg Alloy Deposited by Electrophoretic Deposition, Ceram. Int., 2014, 40, p 9473–948410.1016/j.ceramint.2014.02.020 ↗
13. M. Razavi, M. Fathi, O. Savabi, S. Mohammad Razavi, B. Hashemi Beni, D. Vashaee, and L. Tayebi, Controlling the Degradation Rate of Bioactive Magnesium Implants by Electrophoretic Deposition of Akermanite Coating, Ceram. Int., 2014, 40, p 3865–387210.1016/j.ceramint.2013.08.027 ↗
14. E.J. Lee, S.H. Teng, T.S. Jang, P. Wang, S.W. Yook, H.E. Kim, and Y.H. Koh, Nanostructured Poly(ε-caprolactone)-Silica Xerogel Fibrous Membrane for Guided Bone Regeneration, Acta Mater., 2010, 6, p 3557–3565
15. Y. Huanga, Q. Dinga, X. Panga, S. Hana, and Y. Yana, Corrosion Behavior and Biocompatibility of Strontium and Fluorine Co-Doped Electrodeposited Hydroxyapatite Coatings, Appl. Surf. Sci., 2013, 282, p 456–46210.1016/j.apsusc.2013.05.152 ↗
16. H.R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, R. Ebrahimi-Kahrizsangi, and M. Medraj, In-Vitro Corrosion Inhibition Mechanism of Fluorine-Doped Hydroxyapatite and Brushite Coated Mg-Ca Alloys for Biomedical Applications, Ceram. Int., 2014, 40, p 7971–798210.1016/j.ceramint.2013.12.147 ↗
17. H. Wang, C. Zhao, Y. Chen, J. Li, and X. Zhang, Electrochemical Property and In Vitro Degradation of DCPD-PCL Composite Coating on the Biodegradable Mg-Zn Alloy, Mater. Lett., 2012, 68, p 435–43810.1016/j.matlet.2011.11.029 ↗
18. A. Zomorodia, M.P. Garcia, T.M. Silva, J.C.S. Fernandes, M.H. Fernandes, and M.F. Montemor, Corrosion Resistance of a Composite Polymeric Coating Applied on Biodegradable AZ31 Magnesium Alloy, Acta Mater., 2013, 9, p 8660–8670
19. H.M. Wong, K.W.K. Yeung, K.O. Lam, V. Tam, P.K. Chu, K.D.K. Luk, and K.M.C. Cheung, A Biodegradable Polymer-Based Coating to Control the Performance of Magnesium Alloy Orthopaedic Implants, Biomaterials, 2010, 31, p 2084–209610.1016/j.biomaterials.2009.11.111 ↗
20. Y. Chen, Y. Song, S. Zhang, J. Li, C. Zhao, and X. Zhang, Interaction Between a High Purity Magnesium Surface and PCL and PLA Coatings During Dynamic Degradation, Biomed. Mater., 2011, 6, p 1–810.1088/1748-6041/6/2/025005 ↗
21. B.D. Cullity, Elements of X-ray Diffraction, 2nd ed., Addison-Wesley, Massachusetts, 1978
22. Y. Song, E.H. Hana, D. Shan, C.D. Yim, and B.S. You, The Effect of Zn Concentration on the Corrosion Behavior of Mg-xZn Alloys, Corros. Sci., 2012, 65, p 322–33010.1016/j.corsci.2012.08.037 ↗
23. G.R. Argade, K. Kandasamy, S.K. Panigrahi, and R.S. Mishra, Corrosion Behavior of a Friction Stir Processed Rare-Earth Added Magnesium Alloy, Corros. Sci., 2012, 58, p 321–32610.1016/j.corsci.2012.01.007 ↗
24. Z. Shi and M. Liu, Atrens A., Measurement of the Corrosion Rate of Magnesium Alloys Using Tafel Extrapolation, Corros. Sci., 2010, 52, p 579–58810.1016/j.corsci.2009.10.016 ↗
25. H.R. Bakhsheshi-Rad, M.H. Idris, M.R. Abdul-Kadir, A. Ourdjini, M. Medraj, M. Daroonparvar, and E. Hamzah, Mechanical and Bio-corrosion Properties of Quaternary Mg-Ca-Mn-Zn Alloys Compared with Binary Mg-Ca Alloys, Mater. Des., 2014, 53, p 283–29210.1016/j.matdes.2013.06.055 ↗
26. T. Kokubo, H.M. Kim, and M. Kawashita, Novel Bioactive Materials with Different Mechanical Properties, Biomaterials, 2003, 24, p 2161–217510.1016/S0142-9612(03)00044-9 ↗
27. K. Huang, S. Cai, G. Xu, X. Ye, Y. Dou, and M. Ren, Preparation and Characterization of Mesoporous 45S5 Bioactive Glass-Ceramic Coatings on Magnesium Alloy for Corrosion Protection, Appl. Surf. Sci., 2013, 264, p 816–82210.1016/j.apsusc.2012.10.146 ↗
28. Y. Wu and R.L. Clark, Controllable Porous Polymer Particles Generated by Electrospraying, J. Colloid Interface Sci., 2007, 310, p 529–53510.1016/j.jcis.2007.02.023 ↗
29. P. Dayal, J. Liu, S. Kumar, and T. Kyu, Experimental and Theoretical Investigations of Porous Structure Formation in Electrospun fibers, Macromolecules, 2007, 40, p 7689–769410.1021/ma071418l ↗
30. A. Abdal-hay, T. Amna, and J.K. Lim, Biocorrosion and Osteoconductivity of PCL/nHAp Composite Porous Film-Based Coating of Magnesium Alloy, Solid State Sci., 2013, 18, p 131–14010.1016/j.solidstatesciences.2012.11.017 ↗
31. X.N. Gu, W. Zheng, Y. Cheng, and Y.F. Zheng, A Study on Alkaline Heat Treated Mg-Ca Alloy for the Control of the Biocorrosion Rate, Acta Biomater., 2009, 5, p 2790–279910.1016/j.actbio.2009.01.048 ↗
32. M. Lebourg, J. Suay Antón, and J.L. Gomez Ribelles, Characterization of Calcium Phosphate Layers Grown on Polycaprolactone for Tissue Engineering Purposes, Compos. Sci. Technol., 2010, 70, p 1796–180410.1016/j.compscitech.2010.07.017 ↗
33. H.W. Kim, J.C. Knowles, and H.E. Kim, Hydroxyapatite/Poly(ε-caprolactone) Composite Coatings on Hydroxyapatite Porous Bone Scaffold for Drug Delivery, Biomaterials, 2004, 25, p 1279–128710.1016/j.biomaterials.2003.07.003 ↗
34. M. Kheradmandfard and M.H. Fathi, Fabrication and Characterization of Nanocrystalline Mg-Substituted Fluorapatite by High Energy Ball Milling, Ceram. Int., 2013, 39, p 1651–165810.1016/j.ceramint.2012.08.007 ↗
35. S. Rössler, A. Sewing, M. Stölzel, R. Born, D. Scharnweber, M. Dard, and H. Worch, Electrochemically Assisted Deposition of Thin Calcium Phosphate Coatings at Near-Physiological pH and Temperature, J Biomed Mater Res A, 2003, 64, p 655–66310.1002/jbm.a.10330 ↗
36. Y. Chen and X. Miao, Effect of Fluorine Addition on the Corrosion Resistance of Hydroxyapatite Ceramics, Ceram. Int., 2004, 30, p 1961–196510.1016/j.ceramint.2003.12.182 ↗
37. M. Tomozawa and S. Hiromoto, Microstructure of Hydroxyapatite- and Octacalcium Phosphate-Coatings Formed on Magnesium by a Hydrothermal Treatment at Various pH Values, Acta Mater., 2011, 59, p 355–36310.1016/j.actamat.2010.09.041 ↗
38. M.F.M. Yusoff, M.R. AbdulKadir, N. Iqbal, M.A. Hassan, and R. Hussain, Dipcoating of Poly(ε-caprolactone)/Hydroxyapatite Composite Coating on Ti6Al4 V for Enhanced Corrosion Protection, Surf. Coat. Technol., 2014, 245, p 102–10710.1016/j.surfcoat.2014.02.048 ↗
39. D.W. Hong, Z.T. Lai, T.S. Fu, T.T. Tsai, I.M. Chu, and P.L. Lai, The Influences of Polycaprolactone-Grafted Nanoparticles on the Properties of Polycaprolactone Composites with Enhanced Osteoconductivity, Compos. Sci. Technol., 2013, 83, p 64–7110.1016/j.compscitech.2013.04.020 ↗
40. M. Razavi, M. Fathi, O. Savabi, B. Hashemi Beni, D. Vashaee, and L. Tayebi, Surface Microstructure and In Vitro Analysis of Nanostructured akermanite (Ca2MgSi2O7) Coating on Biodegradable Magnesium Alloy for Biomedical Applications, Colloids Surf. B, 2014, 117, p 432–44010.1016/j.colsurfb.2013.12.011 ↗
41. M. Burke, B. Clarke, Y. Rochev, A. Gorelov, and W. Carroll, Estimation of the Strength of Adhesion Between a Thermoresponsive Polymer Coating and Nitinol Wire, J. Mater. Sci. Mater. Med., 2008, 19, p 1971–197910.1007/s10856-007-3274-4 ↗
42. L. Xu and A. Yamamoto, Characteristics and Cytocompatibility of Biodegradable Polymer Film on Magnesium by Spin Coating, Colloids Surf. B, 2012, 93, p 67–7410.1016/j.colsurfb.2011.12.009 ↗
43. L. Xu and A. Yamamoto, In Vitro Degradation of Biodegradable Polymer-Coated Magnesium Under Cell Culture Condition, Appl. Surf. Sci., 2012, 258, p 6353–635810.1016/j.apsusc.2012.03.036 ↗
44. A. Abdal-hay, M. Dewidar, and J.K. Lim, Biocorrosion Behavior and Cell Viability of Adhesive Polymer Coated Magnesium Based Alloys for Medical Implants, Appl. Surf. Sci., 2012, 261, p 536–54610.1016/j.apsusc.2012.08.051 ↗
45. H.R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, M.A.M. Yajid, M. Kasiri-Asgarani, M.R. Abdul-Kadir, and M. Medraj, In-Vitro Degradation Behavior of Mg Alloy Coated by Fluorine Doped Hydroxyapatite and Calcium Deficient Hydroxyapatite, Trans. Nonferrous Met. Soc. China, 2014, 24, p 2516–252810.1016/S1003-6326(14)63378-1 ↗
46. A. Srinivasan, P. Ranjani, and N. Rajendran, Electrochemical Polymerization of Pyrrole Over AZ31 Mg Alloy for Biomedical Applications, Electrochim. Acta, 2013, 88, p 310–32110.1016/j.electacta.2012.10.087 ↗
47. G. Wu, Fabrication of Al and Al/Ti Coatings on Magnesium Alloy by Sputtering, Mater. Lett., 2007, 61, p 3815–381710.1016/j.matlet.2006.12.082 ↗
48. X. Ye, S. Cai, Y. Dou, G. Xu, K. Huang, M. Ren, and X. Wang, Bioactive Glass-Ceramic Coating for Enhancing the In Vitro Corrosion Resistance of Biodegradable Mg Alloy, Appl. Surf. Sci., 2012, 259, p 799–80510.1016/j.apsusc.2012.07.127 ↗
49. C. Zhou, X. Lu, Z. Xin, J. Liu, and Y. Zhang, Polybenzoxazine/SiO2 Nanocomposite Coatings for Corrosion Protection of Mild Steel, Corros. Sci., 2014, 80, p 269–27510.1016/j.corsci.2013.11.042 ↗
50. X. Lu, Y. Zuo, X. Zhao, Y. Tang, and X. Feng, The Study of a Mg-rich Epoxy Primer for Protection of AZ91D Magnesium Alloy, Corros. Sci., 2011, 53, p 153–16010.1016/j.corsci.2010.09.008 ↗
51. H.R. Bakhsheshi-Rad, E. Hamzah, M. Daroonparvar, M. Kasiri-Asgarani, and M. Medraj, Synthesis and Biodegradation Evaluation of Nano-Si and Nano-Si/TiO2 Coatings on Biodegradable Mg-Ca alloy in Simulated Body Fluid, Ceram. Int., 2014, 40, p 14009–1401810.1016/j.ceramint.2014.05.126 ↗
52. M. Liu, X. Mao, H. Zhu, A. Lin, and D. Wang, Water and Corrosion Resistance of Epoxy-Acrylic-Amine Waterborne Coatings: Effects of Resin Molecular Weight, Polar Group and Hydrophobic Segment, Corros. Sci., 2013, 75, p 106–11310.1016/j.corsci.2013.05.020 ↗
53. G.Y. Liu, S. Tang, D. Li, and J. Hu, Self-adjustment of Calcium Phosphate Coating on Micro-arc Oxidized Magnesium and Its Influence on the Corrosion Behaviour in Simulated Body Fluids, Corros. Sci., 2014, 79, p 206–21410.1016/j.corsci.2013.11.011 ↗
54. M.I. Jamesh, G. Wu, Y. Zhao, D.R. McKenzie, M.M.M. Bilek, P.K. Chu, and B.S. Necula, Effects of Zirconium and Oxygen Plasma Ion Implantation on the Corrosion Behavior of ZK60 Mg Alloy in Simulated Body Fluids, Corros. Sci., 2014, 82, p 7–26 55. 56.10.1016/j.corsci.2013.11.044 ↗
55. H.R. Bakhsheshi-Rad, E. Hamzah, M.R. Abdul-Kadir, M. Daroonparvar, and M. Medraj, Corrosion and Mechanical Performance of Double-Layered Nano-Al/PCL Coating on Mg-Ca-Bi Alloy, Vacuum, 2015, 119, p 95–9810.1016/j.vacuum.2015.04.039 ↗
56. S.N. Saud, E. Hamzah, T. Abubakar, H.R. Bakhsheshi-Rad, M. Zamri, and M. Tanemura, Effects of Mn Additions on the Structure, Mechanical Properties, and Corrosion Behavior of Cu-Al-Ni Shape Memory Alloys, J. Mater. Eng. Perform., 2014, 23, p 3620–362910.1007/s11665-014-1134-1 ↗