Surface Modification of AISI 304 Stainless Steel with NiBSi-SiC Composite by TIG Method
Source abstract
Abstract
The aim of this study was to investigate the properties of TIG coatings of AISI 304 steel with SiC-reinforced NiBSi and NiBSi/SiC-X metal matrix at different rate, as well as the effect of SiC reinforcement rate on microstructure, microhardness, and wear properties of the coating layer. After the coating process, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and x-ray diffraction technique (XRD) were conducted in order to determine microstructure, chemical composition, and phases. Microhardness and wear tests were carried out to determine wear mechanism of the coating layer, and wear surfaces were also characterized by SEM and EDS. The results showed that enhanced microhardness could be achieved with SiC reinforcement and microphotograph of microstructure showed a dendritic structure with dissolved SiC particles. Moreover, coatings of AISI 304 with SiC and NiBSi/SiC presented an excellent hardness and wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. B. Lotfi, M. Rostami, and Z. Sadeghian, Effect of Silicon Content on Microstructure of Al-Si/SiCp Composite Layer Cladded on A380 Al Alloy by TIG Welding Process, Trans. Nonferrous Met. Soc., 2014, 24, p 2824–283010.1016/S1003-6326(14)63414-2 ↗
2. F. Weng, H. Yu, C. Chen, and J. Dai, Microstructures and Wear properties of Laser Cladding Co-Based Composite Coatings on Ti-6Al-4V, Mater. Des., 2015, 80, p 174–18110.1016/j.matdes.2015.05.005 ↗
3. M. Qunshuang, L. Yajiang, and W. Juan, Effects of Ti Addition on Microstructure Homogenization and Wear Resistance of Wide-Band Laser Clad Ni60/WC Composite Coatings, Int. J. Refract. Metal. Hard Mater., 2017, 64, p 225–23310.1016/j.ijrmhm.2016.11.002 ↗
4. G.R. Mirshekari, S. Daee, S. FatourehBonabi, M.R. Tavakoli, A. Shafyei, and M. Safaei, Effect of Interlayers on the Microstructure and Wear Resistance of Stellite 6 Coatings Deposited on AISI, 420 Stainless Steel by GTAW Technique, Surf. Interfaces, 2017, 9, p 79–9210.1016/j.surfin.2017.08.005 ↗
5. S. Saroj, C.K. Sahoo, D. Tijo, K. Kumar, and M. Masanta, Sliding Abrasive Wear Characteristic of TIG Cladded TiC Reinforced Inconel825 Composite Coating, Int. J. Refract. Metal. Hard Mater., 2017, 69, p 119–13010.1016/j.ijrmhm.2017.08.005 ↗
6. S. Buytoz, M. Ulutan, S. Islak, B. Kurt, and O.N. Celik, Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel, Arab. J. Sci. Eng., 2013, 38, p 1481–149110.1007/s13369-013-0536-y ↗
7. L. Liu, H. Xu, J. Xiao, X. Wei, G. Zhang, and C. Zhang, Effect of Heat Treatment on Structure and Property Evolutions of Atmospheric Plasma Sprayed NiCrBSi Coatings, Surf. Coat. Technol., 2017, 325, p 548–55410.1016/j.surfcoat.2017.07.011 ↗
8. I.C. Grigorescu, C. Di Rauso, R. Drira-Halouani, B. Lavelle, R. Giampaolo, and J.S. Lira, Phase Characterization in Ni Alloy-Hard Carbide Composites for Fused Coatings, Surf. Coat. Technol., 1995, 76–77, p 494–49810.1016/0257-8972(95)02511-1 ↗
9. P. Sheppard and H. Koiprasert, Effect of W Dissolution in NiCrBSi-WC and NiBSi-WC Arc Sprayed Coatings on Wear Behaviors, Wear, 2014, 317, p 194–20010.1016/j.wear.2014.06.008 ↗
10. Z.Q. Zhang, H.D. Wang, B.S. Xu, and G.S. Zhang, Characterization of Microstructure and Rolling Contact Fatigue Performance of NiCrBSi/WC–Ni Composite Coatings Prepared by Plasma Spraying, Surf. Coat. Technol., 2015, 261, p 60–6810.1016/j.surfcoat.2014.11.061 ↗
11. L.Y. Chen, T. Xu, H. Wang, P. Sang, S. Lu, Z.X. Wang, S. Chen, and L.C. Zhang, Phase Interaction Induced Texture in a Plasma Sprayed-Remelted NiCrBSi Coating During Solidification: An Electron Backscatter Diffraction Study, Surf. Coat. Technol., 2019, 358, p 467–48010.1016/j.surfcoat.2018.11.019 ↗
12. R. Rachidi, B.E. Kihel, and F. Delaunois, Microstructure and Mechanical Characterization of NiCrBSi Alloy and NiCrBSi-WC Composite Coatings Produced by Flame Spraying, Mater. Sci. Eng. B, 2019, 241, p 13–2110.1016/j.mseb.2019.02.002 ↗
13. D. Kong and B. Zhao, Effects of Loads on Friction-Wear Properties of HVOF Sprayed NiCrBSi Alloy Coatings by Laser Re-Melting, J. Alloys Compd., 2017, 705, p 700–70710.1016/j.jallcom.2017.02.171 ↗
14. A. Zabihi and R. Soltani, Tribological Properties of B4C Reinforced Aluminum Composite Coating Produced by TIG Re-Melting of Flame Sprayed Al-Mg-B4C Powder, Surf. Coat. Technol., 2018, 349, p 707–71810.1016/j.surfcoat.2018.06.040 ↗
15. M.A. Maleque, K.A. Bello, A.A. Adebisi, and A. Dube, Abrasive Wear Response of TIG-Melted TiC Composite Coating: Taguchi Approach, Mater. Sci. Eng., 2017, 184, p 1–6
16. C.K. Sahoo and M. Masanta, Microstructure and Mechanical Properties of TiC-Ni Coating on AISI304 Steel Produced by TIG Cladding Process, J. Mater. Process. Technol., 2017, 240, p 126–13710.1016/j.jmatprotec.2016.09.018 ↗
17. F. Ghadami, M. HeydarzadehSohi, and S. Ghadami, Effect of TIG Surface Melting on Structure and Wear Properties of Air Plasma-Sprayed WC-Co Coatings, Surf. Coat. Technol., 2015, 261, p 108–11310.1016/j.surfcoat.2014.11.050 ↗
18. A. Lanzutti, M. Lekka, C. de Leitenburg, and L. Fedrizzi, Effect of Pulse Current on Wear Behavior of Ni Matrix Micro and Nano-SiC Composite Coatings at Room and Elevated Temperature, Tribol. Int., 2019, 132, p 50–6110.1016/j.triboint.2018.12.011 ↗
19. P. Wang, S. Li, C. Wei, W. Han, G. Wen, X. Geng, S. Li, H. Sun, and X. Li, Microstructure and Ablation Properties of SiC/ZrB2-SiC/ZrB2/SiC Multilayer Coating on Graphite, J. Alloys Compd., 2019, 781, p 26–3610.1016/j.jallcom.2018.12.045 ↗
20. R. Gawel, K. Kyzioł, Z. Jurasz, and Z. Grzesik, Oxidation Resistance of Valve Steels Covered With Thin SiC Coatings Obtained by RF CVD, Corros. Sci., 2018, 145, p 16–2510.1016/j.corsci.2018.09.014 ↗
21. J.P. Riviere, J. Delafond, P. Misaelides, and F. Noli, Corrosion Protection of an AISI, 321 Stainless Steel by SIC Coatings, Surf. Coat. Technol., 1998, 100–101, p 243–24610.1016/S0257-8972(97)00622-1 ↗
22. S. Tailor, R.M. Mohantym, and P.R. Soni, A Review on Plasma Sprayed Al-SiC Composite Coatings, J. Mater. Sci. Surface Eng., 2013, 1(1), p 15–22
23. S. Mridha, Titanium Nitride Layer Formation by TIG Surface Melting in a Reactive Environment, J. Mater. Proc. Tech., 2005, 168, p 471–47710.1016/j.jmatprotec.2005.02.247 ↗
24. P.H. Lailatula and M.A. Maleque, Surface Modification of Duplex Stainless Steel with SiC Preplacement Using TIG Torch Cladding, Proc. Eng., 2017, 184, p 737–74210.1016/j.proeng.2017.04.151 ↗
25. K. Kilicay, S. Buytoz, and M. Ulutan, Microstructural and Tribological Properties of Induction Cladded NiCrBSi/WC Composite Coatings, Surf. Coat. Technol., 2020, 397, p 1–910.1016/j.surfcoat.2020.125974 ↗
26. J. Zhang and S. Hou, Effects of CTCP Modification on Microstructure and Wear Behavior of CTCP-NiCrBSi/Heat Resistant Steel Composite Layer, Materials, 2018, 11, p 1–14
27. S. Buytoz and M. Ulutan, In Situ Synthesis of Reinforced MMC Surface on AISI, 304 Stainless Steel by TIG Surface Alloying, Surf. Coat. Technol., 2006, 200, p 3698–370410.1016/j.surfcoat.2005.02.178 ↗
28. L.Y. Chen, T. Xu, S. Lu, Z.X. Wang, S. Chen, and L.C. Zhang, Improved Hardness and Wear Resistance of Plasma Sprayed Nanostructured NiCrBSi Coating Via Short-Time Heat Treatment, Surf. Coat. Technol., 2018, 350, p 436–44410.1016/j.surfcoat.2018.07.037 ↗
29. Y.H. Celik and E. Kilickap, Hardness And Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC, Powder Metall. Met. Ceram., 2019, 57, p 613–62210.1007/s11106-019-00023-w ↗
30. O.N. Celik, M. Ulutan, H. Gasan, Ü. Er, and S. Buytoz, Effects of Graphite Content on the Microstructure and Wear Properties of an AISI, 8620 Steel Surface Modified by Tungsten Inert Gas (TIG), Surf. Coat. Technol., 2011, 206, p 1423–142910.1016/j.surfcoat.2011.09.009 ↗
31. S. Islak, Ö. Eski, and S. Buytoz, Microstructure and Wear Properties of FeW-SiC Based Composite Coating Produced with Tungsten Inert Gas (TIG) Surfacing Method, Optoelectron. Adv. Mater. Rapid Commun., 2011, 5(6), p 665–672
32. Y.H. Celik and K. Secilmis, Investigation of Wear Behaviours of Al Matrix Composites Reinforced with Different B4C Rate Produced by Powder Metallurgy Method, Adv. Powder Technol., 2017, 28, p 2218–222410.1016/j.apt.2017.06.002 ↗
33. L. Thijs, M.L.M. Sistiaga, R. Wauthle, Q. Xie, J.P. Kruth, and J. Van Humbeeck, Strong Morphological and Crystallographic Texture and Resulting Yield Strength Anisotropy in Selective Laser Melted Tantalum, Acta Mater., 2013, 61(12), p 4657–466810.1016/j.actamat.2013.04.036 ↗
34. Y. Lyu, Y. Sun, and Y. Yang, Non-Vacuum Sintering Process of WC/W2C Reinforced Ni-Based Coating on Steel, Met. Mater. Int., 2016, 22(2), p 311–31810.1007/s12540-016-5462-6 ↗
35. S. Zhou, Y. Huang, X. Zeng, and Q. Hu, Microstructure Characteristics of Ni-Based WC Composite Coatings by Laser Induction Hybrid Rapid Cladding, Mater. Sci. Eng. A, 2008, 480, p 564–57210.1016/j.msea.2007.07.058 ↗
36. S. Zhou, X. Zeng, Q. Hu, and Y. Huang, Analysis of Crack Behavior for Ni-Based WC Composite Coatings by Laser Cladding and Crack-Free Realization, Appl. Surf. Sci., 2008, 255(5), p 1646–165310.1016/j.apsusc.2008.04.003 ↗
37. J. Qu, W. Xiong, D. Ye, Z. Yao, W. Liu, and S. Lin, Effect of WC Content on the Microstructure and Mechanical Properties of Ti(C05N05)-WC-Mo-Ni Cermets, Int. J. Refract. Met. Hard Mater., 2010, 28(2), p 243–24910.1016/j.ijrmhm.2009.10.005 ↗
38. M.R. Fernández, A. García, J.M. Cuetos, R. González, A. Noriega, and M. Cadenas, Effect of Actual WC Content on the Reciprocating Wear of a Laser Cladding NiCrBSi Alloy Reinforced with WC, Wear, 2015, 324–325, p 80–8910.1016/j.wear.2014.12.021 ↗
39. S.E. Saddow and A. Agarwal, Advances in Silicon Carbide Processing and Applications, Artech House Semiconductor Materials and Devices Library, 2004, p. 1–51.
40. M. Türkoğlu and D. Hanbay, Plant Recognition System Based on Extreme Learning Machine by Using Shearlet Transform and New Geometric Features, J. Fac. Eng. Arch. Gazi Univ., 2019, 34(4), p 2097–2112
41. D. Deschuyteneer, F. Petit, M. Gonon, and F. Cambier, Influence of Large Particle Size-up to 1.2 mm– and Morphology on Wear Resistance in NiCrBSi/WC Laser Cladded Composite Coatings, Surface Coat. Technol., 2017, 311, p 365–37310.1016/j.surfcoat.2016.12.110 ↗