Effect of Aging Temperature on Corrosion Behavior of Sintered 17-4 PH Stainless Steel in Dilute Sulfuric Acid Solution
Source abstract
Abstract
The general corrosion behavior of sintered 17-4 PH stainless steel processed under different processing conditions in dilute sulfuric acid solution at 25 °C was studied by open-circuit potential measurement and potentiodynamic polarization technique. The corrosion resistance was evaluated based on electrochemical parameters, such as polarization resistance, corrosion potential, corrosion current density as well as corrosion rate. The results showed that the precipitation-hardening treatment could significantly improve the corrosion resistance of the sintered 17-4 PH stainless steel in studied environment. As far as the influence of aging temperature on corrosion behavior of the sintered 17-4 PH stainless steel is concerned, polarization resistance and corrosion rate are reduced with increasing aging temperature from 480 up to 500 °C regardless of the temperature of solution treatment. It can be concluded that the highest corrosion resistance in 0.5 M H 2 SO 4 solution exhibits 17-4 PH after solution treatment at 1040 °C followed by aging at 480 °C.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A.J. Sedriks, Corrosion of Stainless Steels, Wiley-Interscience, New York, 1996
2. H.S. Khatak and B. Raj, Corrosion of Austenitic Stainless Steels, Woodhead Publishing Limited, India, 200210.1533/9780857094018 ↗
3. S. Wahyudi, F. Gapsari, and H. Awali, Optimization of Chemical Environment Condition towards Corrosion Rate of Sulfuric Acid Resistant Alloy Metal (Saramet) Using Response Surface Methodology, Appl. Mech. Mater., 2014, 493, p 733–73810.4028/www.scientific.net/AMM.493.733 ↗
4. J. Grubb, High Alloy Stainless Steels for Concentrated Sulfuric Acid, in Corrosion Solutions Conference (Park City, Utah, USA, 2009), p. 277–282
5. International Nickel Co., The Corrosion Resistance of Nickel-Containing Alloys in Sulfuric Acid and Related Compounds. (Engineering Bulletin I, 1983)
6. W. Bogaerts, Materials Engineering for the Chemical Process Industries (2008)
7. M. Karaminezhaad, S. Sharafi, and K. Dalili, Effect of Molybdenum on SCC of 17-4 PH Stainless Steel Under Different Aging Conditions in Chloride Solutions, J. Mater. Sci., 2006, 41, p 3329–333310.1007/s10853-005-5416-8 ↗
8. C. Schade, J. Schaberl, and A. Lawley, Stainless Steel AISI, Grades for PM Applications, Int. J. Powder Metall., 2008, 44(3), p 57–67
9. D.W. Bucholz, and G.A. Saltzman, Corrosion, Wear and Erosion Resistant Branzed Coatings of Tungsten Carbide Heat Treating. Proceeding of the 20th conference, 9–12 October 2000, St. Louis, p. 1055–1062
10. S.S.M. Tavares, F.J. da Silva, C. Scandian, G.F. da Silva, and H.F.G. de Abreu, Microstructure and Intergranular Corrosion Resistance of UNS S17400 (17-4 PH) Stainless steel, Corros. Sci., 2010, 52, p 3835–383910.1016/j.corsci.2010.07.016 ↗
11. C.N. Hsiao, C.S. Chiou, and J.R. Yang, Aging Reactions in a 17-4 PH Stainless Steel, Mater. Chem. Phys., 2002, 74, p 134–14210.1016/S0254-0584(01)00460-6 ↗
12. L. Ping, C. Qi-zhou, W. Bo-kang, and Z. Xian-zhong, Effect of Aging Temperature on Erosion-Corrosion Behavior of 17-4 PH Stainless Steels in Dilute Sulphuric Acid Slurry, J. Iron Steel Res. Int., 2006, 13(5), p 73–7810.1016/S1006-706X(06)60099-X ↗
13. M.R. Tavakoli Shoushtari, M.H. Moayed, and A. Davoodi, Post-weld Heat Treatment Influence on Galvanic Corrosion of GTAW of 17-4 PH Stainless Steel in 3.5% NaCl, Corros. Eng. Sci. Technol., 2011, 46(4), p 415–42410.1179/174327809X409259 ↗
14. A. Szewczyk-Nykiel, S. Gądek, M. Nykiel, and J. Kazior, Właściwości Spiekanych Stali Nierdzewnych Utwardzonych Wydzieleniowo (Properties of Sintered Precipitation Hardening Stainless Steeles), Innovative Manufacturing Technology, Instytut Zaawansowanych Technologii, 2011, Cracow, p. 445–458 (in Polish)
15. A. Ziewiec, A. Zielinska-Lipiec, and E. Tasak, Microstructure of Welded Joints of X5CrNiCuNb16-4 (17-4 PH) Martensitic Stainlees Steel after Heat Treatment, Arch. Metall. Mater., 2014, 59(3), p 965–97010.2478/amm-2014-0162 ↗
16. M. Esfandiari and H. Dong, The Corrosion and Corrosion–Wear Behaviour of Plasma Nitride 17-4 PH Precipitation Hardening Stainless Steel, Surf. Coat. Technol., 2007, 202, p 466–47810.1016/j.surfcoat.2007.06.069 ↗
17. A. Gratton, Comparison of Mechanical, Metallurgical Properties of 17-4 PH Stainless Steel between Direct Metal Laser Sintering (DMLS) and Traditional Manufacturing Methods, Proceedings of The National Conference On Undergraduate Research (NCUR), 29–31 March 2012, Weber State University, Ogden, Utah
18. K.S. Raja and K. Prasad Rao, Intergranular and General Corrosion Behaviour of 17-4 PH Weldments, Mater. Corros., 1995, 46, p 534–53810.1002/maco.19950460905 ↗
19. Z. Cheng, C. Kwok, and K. Lo, Laser Surface Melting of 17-4 PH Precipitation-Hardenable Stainless Steel, Pacific International Conference on Application of Lasers & Optics, 23–25 March 2010, paper 120310.2351/1.5057183 ↗
20. R. Włodarczyk and A. Wronska, Effect of pH on Corrosion of Sintered Stainless Steels Used for Bipolar Plates in Polymer Exchange Membrane Fuel Cells, Arch. Metall. Mater., 2013, 58(1), p 90–9310.2478/v10172-012-0156-7 ↗
21. H.K. Rafi, D. Pal, N. Patil, T.L. Starr, and B.E. Stucker, MicrostRucture and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting, J. Mater. Eng. Perform., 2014, 23, p 4421–442810.1007/s11665-014-1226-y ↗
22. A. Brojanowska, B. Załuska, J. Kazior, and T. Wierzchoń, Odporność Korozyjna Spiekanych Stali 17-4 PH o Różnej Porowatości po Procesie Azotowania w Niskotemperaturowej Plazmie (Corrosion Resistance of Sintered 17-4 PH Steel of Varying Porosity After Nitriding in Low-Temperature Plasma), Ochr. przed koroz., 2014, 5, p 160–167 (in Polish)
23. M. Mehriz, and M. Moayed, The Effect of Thermomechanical Treatment on Pitting Corrosion of 17-4 PH Stainless Steel, 223rd ECS Meeting, The Electrochemical Society, 2013, paper 69010.1149/MA2013-01/14/690 ↗
24. W.D. Yoo, J.H. Lee, K.T. Youn, and Y.M. Rhyim, Study on the Microstructure and Mechanical Properties of 17-4 PH Stainless Steel Depending on Heat Treatment and Aging Time, Solid State Phenom., 2006, 118, p 15–2010.4028/www.scientific.net/SSP.118.15 ↗
25. M.R. Tavokoli Shoushtari, Effect of Ageing Heat Treatment on Corrosion Behavior of 17-4 PH Stainless Steel in NaCl, Int. J. Iron Steel Soc. Iran, 2010, 7(1), p 33–36
26. E. Klar and P.K. Samal, Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties, ASM International, 200710.31399/asm.tb.pmsspmp.9781627083126 ↗
27. L. Yang, Techniques for Corrosion Monitoring, Woodhead Publishing, Cambridge, 2008
28. E.C. Gan and M.E. Orazem, A Mathematical Model for the Corrosion of Iron in Sulfuric Acid, J. Electrochem. Soc., 1997, 134(6), p 1357–136610.1149/1.2100673 ↗
29. I. Annergren, M. Keddam, H. Takenouti, and D. Thierry, Modelling of the Passivation Mechanism of Fe-Cr Binary Alloys from AC Impedance and Frequency Resolved rrde-II. Behaviour of Fe-Cr Alloys in 0.5 M H2S04 with an Addition of Chloride, Electrochimica Acta, 1997, 42(10), p 1595–161110.1016/S0013-4686(96)00321-0 ↗