A Comparison Between Corrosion Behaviors of Fine-Grained and Coarse-Grained Structures of High-Mn Steel in NaCl Solution
Source abstract
Abstract
In this study, a fine-grained structure was obtained in high-Mn austenitic steel through martensite treatment. The corrosion response of fine-grained and coarse-grained steels was studied and compared in 3.5 wt.% NaCl solution. Electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, and Mott-Schottky analysis were performed to understand the effect of grain refinement on the electrochemical behavior of this steel. Microstructural evaluation showed that by reduction in grain size, the amount of low energy grain boundaries was increased, which led to better electrochemical behavior. In addition, the corrosion resistance of fine-grained steel did not deteriorate in comparison with coarse-grained steel. Both specimens showed a charge-transfer resistance of about 4-5 kΩ cm2 in NaCl. Besides, a protective film related to fine-grained sample was detected by EIS and Mott-Schottky analysis, which could be a sign of higher grain boundaries in this steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. M. Eskandari, A. Zarei-Hanzaki, M.A. Mohtadi-Bonab, Y. Onuki, R. Basu, A. Asghari, and J.A. Szpunar, Grain-Orientation-Dependent of γ-ε-α′ Transformation and Twinning in a Super-High-Strength, High Ductility Austenitic Mn-Steel, Mater. Sci. Eng., A, 2016, 674, p 514–52810.1016/j.msea.2016.08.024 ↗
2. M. Eskandari, M.R. Yadegari-Dehnavi, A. Zarei-Hanzaki, M.A. Mohtadi-Bonab, R. Basu, and J.A. Szpunar, In-Situ Strain Localization Analysis in Low Density Transformation-Twinning Induced Plasticity Steel Using Digital Image Correlation, Opt. Laser Eng., 2015, 67, p 1–1610.1016/j.optlaseng.2014.10.005 ↗
3. M. Eskandari, A. Zarei-Hanzaki, J.A. Szpunar, M.A. Mohtadi-Bonab, A.R. Kamali, and M. Nazarian-Samani, Microstructure Evolution and Mechanical Behavior of a New Microalloyed High Mn Austenitic Steel During Compressive Deformation, Mater. Sci. Eng., A, 2014, 615, p 424–43510.1016/j.msea.2014.07.084 ↗
4. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier, High Manganese Austenitic Twinning Induced Plasticity Steels: A Review of the Microstructure Properties Relationships, Curr. Opin. Solid State Mater. Sci., 2011, 15, p 141–16810.1016/j.cossms.2011.04.002 ↗
5. G. Frommeyer, U. Brux, and P. Neumann, Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes, ISIJ Int., 2003, 43, p 438–44210.2355/isijinternational.43.438 ↗
6. I. Gutierrez-Urruti and D. Raabe, Influence of Al Content and Precipitation State on the Mechanical Behavior of Austenitic High-Mn Low-Density Steels, Scr. Mater., 2013, 68, p 343–34710.1016/j.scriptamat.2012.08.038 ↗
7. R.D.K. Misra, B.R. Kumar, and M. Somani, Deformation Processes During Tensile Straining of Fine/Nanograined Structures Formed by Reversion in Metastable Austenitic Steel, Scr. Mater., 2008, 59, p 79–8210.1016/j.scriptamat.2008.02.028 ↗
8. D.L. Johnnsen, A. Kyrolainen, and P.J. Ferreira, Influence of Annealing Treatment on the Formation of Nano/Submicron Grain Size AISI, 301 Austenitic Stainless Steels, Metall. Trans. A, 2006, 37, p 2325–233810.1007/BF02586207 ↗
9. M. Khalissi, R.K.S. Raman, and S. Khoddam, Stress Corrosion Cracking of Novel Steel for Automotive Applications, Procedia Eng., 2011, 10, p 3381–338610.1016/j.proeng.2011.04.557 ↗
10. A. Grajcar, M. Kciuk, S. Topolska, and A. Płachcinska, Microstructure and Corrosion Behavior of Hot-Deformed and Cold-Strained High-Mn Steels, J. Mater. Eng. Perform., 2016, 25, p 2245–225410.1007/s11665-016-2085-5 ↗
11. V.F.C. Lins, M.A. Freitas, and E.M.P. Silva, Corrosion Resistance Study of Fe-Mn-Al-C Alloys Using Immersion and Potentiostatic Tests, Appl. Surf. Sci., 2005, 250, p 124–13410.1016/j.apsusc.2004.12.040 ↗
12. M.B. Kannan, R.K. Singh Raman, and S. Khoddam, Comparative Studies on the Corrosion Properties of a Fe-Mn-Al-Si Steel and an Interstitial-Free Steel, Corros. Sci., 2008, 50, p 2879–288410.1016/j.corsci.2008.07.024 ↗
13. M. Bobby-Kannan, R.K. Singh-Raman, S. Khoddam, and S. Liyanaarachchi, Corrosion Behavior of Twinning-Induced Plasticity (TWIP) Steel, Mater. Corros., 2011, 61, p 1–5
14. Y.S. Zhang, X.M. Zhu, and S.H. Zhong, Effect of Alloying Elements on the Electrochemical Polarization Behavior and Passive Film of Fe-Mn Base Alloys in Various Aqueous Solutions, Corros. Sci., 2004, 46, p 853–87610.1016/j.corsci.2003.09.002 ↗
15. Y.S. Zhang and X.M. Zhu, Electrochemical Polarization and Passive Film Analysis of Austenitic Fe-Mn-Al Steels in Aqueous Solutions, Corros. Sci., 1999, 41, p 1817–183310.1016/S0010-938X(99)00017-7 ↗
16. T. Dieudonné, L. Marchetti, M. Wery, F. Miserque, M. Tabarant, J. Chêne, C. Allely, P. Cugy, and C.P. Scot, Role of Copper and Aluminum on the Corrosion Behavior of Austenitic Fe-Mn-C TWIP Steels in Aqueous Solutions and the Related Hydrogen Absorption, Corros. Sci., 2014, 83, p 234–24410.1016/j.corsci.2014.02.018 ↗
17. K.D. Ralston and N. Birbilis, Effect of Grain Size on Corrosion: A Review, Corrosion, 2010, 66(7), p 1–1310.5006/1.3462912 ↗
18. M. Pisarek, P. Kedzierzawski, M. Janik-Czachor, and K.J. Kurzydlowski, Effect of Hydrostatic Extrusion on Passivity Breakdown on 303 Austenitic Stainless Steel in Chloride Solution, J. Solid State Electrochem., 2009, 13, p 283–29110.1007/s10008-007-0488-9 ↗
19. A.D. Schino, M. Barteri, and J.M. Kenny, Grain Size Dependence of Mechanical, Corrosion and Tribological Properties of High Nitrogen Stainless Steels, J. Mater. Sci., 2003, 38, p 3257–326210.1023/A:1025181820252 ↗
20. L. Jinlong and L. Hongyun, Effect of Temperature and Chloride Ion Concentration on Corrosion of Passive Films on Nano/Ultrafine Grained Stainless Steels, J. Mater. Eng. Perform., 2014, 23, p 4223–422910.1007/s11665-014-1227-x ↗
21. A.T. Krawczynska, M. GlocK, and K. Lublinska, Intergranular Corrosion Resistance of Nanostructured Austenitic Stainless Steel, J. Mater. Sci., 2013, 48, p 4517–452310.1007/s10853-013-7283-z ↗
22. R.K. Wang, Z.J. Zheng, and Y. Gao, Effect of Shot Peening on the Intergranular Corrosion Susceptibility of a Novel Super 304H Austenitic Stainless Steel, J. Mater. Eng. Perform., 2016, 25, p 20–2810.1007/s11665-015-1806-5 ↗
23. Z.J. Zheng, Y. Gao, Y. Gui, and M. Zhu, Corrosion Behaviour of Nanocrystalline 304 Stainless Steel Prepared by Equal Channel Angular Pressing, Corros. Sci., 2012, 54, p 60–6710.1016/j.corsci.2011.08.049 ↗
24. X.Y. Wang and D.Y. Li, Mechanical and Electrochemical Behavior of Nanocrystalline Surface of 304 Stainless Steel, Electrochim. Acta, 2002, 47, p 3939–394710.1016/S0013-4686(02)00365-1 ↗
25. M. Eskandari, A. Kermanpur, and A. Najafizadeh, Formation of Nano-Grained Structure in a 301 Stainless Steel Using a Repetitive Thermo-Mechanical Treatment, Mater. Letter, 2009, 63, p 1442–144410.1016/j.matlet.2009.03.043 ↗
26. M. Eskandari, A. Najafizadeh, and A. Kermanpur, Effect of Strain-Induced Martensite on the Formation of Nanocrystalline 316L Stainless Steel after Cold Rolling and Annealing, Mater. Sci. Eng., A, 2009, 519, p 46–5010.1016/j.msea.2009.04.038 ↗
27. C. Hu, S. Xia, H. Li, T. Liu, B. Zhou, W. Chen, and N. Wang, Improving the Intergranular Corrosion Resistance of 304 Stainless Steel by Grain Boundary Network Control, Corros. Sci., 2011, 53, p 1880–188610.1016/j.corsci.2011.02.005 ↗
28. S. Xia, B. Zhou, and W. Chen, Grain Cluster Microstructure and Grain Boundary Character Distribution in Alloy 690, Metall. Mater. Trans. A, 2009, 40A, p 3016–303010.1007/s11661-009-0035-7 ↗
29. S. Kobayashi, S. Tsurekawa, T. Watanabe, and G. Palumbo, Grain Boundary Engineering for Control of Sulfur Segregation Induced Embrittlement in Ultrafine-Grained Nickel, Scr. Mater., 2010, 62, p 294–29710.1016/j.scriptamat.2009.11.022 ↗
30. S. Xia, B. Zhou, W. Chen, X. Luo, and H. Li, Features of Highly Twinned Microstructures Produced by GBE in FCC Materials, Mater. Sci. Forum, 2010, 638-642, p 2870–287510.4028/www.scientific.net/MSF.638-642.2870 ↗
31. M. Saremi and M. Yeganeh, Application of Mesoporous Silica Nanocontainers as Smart Host of Corrosion Inhibitor in Polypyrrole Coatings, Corros. Sci., 2014, 86, p 159–17010.1016/j.corsci.2014.05.007 ↗
32. M. Yeganeh and M. Saremi, The Effect of Mesoporous Silica Nanocontainers Incorporation on the Corrosion Behavior of Scratched Polymer Coatings, Prog. Org. Coat., 2016, 90, p 296–30310.1016/j.porgcoat.2015.11.006 ↗
33. X.M. Zhu and Y.S. Zhang, Investigation of the Electrochemical Corrosion Behavior and Passive Film for Fe-Mn, Fe-Mn-Al, and Fe-Mn-Al-Cr Alloys in Aqueous Solutions, Corrosion, 1998, 54, p 3–1210.5006/1.3284826 ↗
34. F.H. Stott, G.C. Wood, and J. Stringer, The Influence of Alloying Elements on the Development and Maintenance of Protective Scales, Oxid. Met., 1995, 44, p 113–14510.1007/BF01046725 ↗
35. N.B. Hakiki, S. Boudin, B. Rondot, and M.D.C. Belo, The Electronic Structure of Passive Films Formed on Stainless Steels, Corros. Sci., 1995, 37, p 1809–182210.1016/0010-938X(95)00084-W ↗
36. Z. Feng, X. Cheng, C. Dong, L. Xu, and X. Li, Passivity of 316L Stainless Steel in Borate Buffer Solution Studied by Mott-Schottky Analysis, Atomic Absorption Spectrometry and X-ray Photoelectron Spectroscopy, Corros. Sci., 2010, 52, p 3646–365310.1016/j.corsci.2010.07.013 ↗
37. A. Fattah-alhosseini, M.A. Golozar, A. Saatchi, and K. Raeissi, Effect of Solution Concentration on Semiconducting Properties of Passive Films Formed on Austenitic Stainless Steels, Corros. Sci., 2010, 52, p 205–20910.1016/j.corsci.2009.09.003 ↗
38. A.M.P. Simoes, M.G.S. Ferreira, B. Rondot, and M.C. Belo, Study of Passive Films Formed on AISI, 304 Stainless Steel by Impedance Measurements and Photoelectrochemistry, J. Electrochem. Soc., 1990, 137, p 82–8710.1149/1.2086444 ↗
39. A. Fattah-alhosseini and S. Vafaeian, Comparison of Electrochemical Behavior Between Coarse-Grained and Fine-Grained AISI, 430 Ferritic Stainless Steel by Mott-Schottky Analysis and EIS Measurements, J. Alloy. Compd., 2015, 639, p 301–30710.1016/j.jallcom.2015.03.142 ↗
40. A.H. Al-Falahi, Structural and Optical Properties of MnO2: Pb Nanocrystalline Thin Films Deposited by Chemical Spray Pyrolysis, IOSR. J. Eng., 2013, 3, p 52–5710.9790/3021-03445257 ↗
41. G.A. Zhang and Y.F. Cheng, Micro-electrochemical Characterization and Mott-Schottky Analysis of Corrosion of Welded X70 Pipeline Steel in Carbonate/Bicarbonate Solution, Electrochim. Acta, 2009, 55, p 316–32410.1016/j.electacta.2009.09.001 ↗