Mechanical and Electrochemical Behavior of Dual-Phase Steels Having Varying Ferrite–Martensite Volume Fractions
Source abstract
Abstract
Dual-phase (DP) steels behave differently under corrosive environment depending upon the volume fractions of phases, mainly martensite, ferrite and bainite. The mechanical behavior and corrosion resistance of DP steels with varying martensite (from 32 to 100%) are investigated. The increase in martensite volume fraction of DP steel results in significant improvement in tensile strength and hardness with a subsequent reduction in elongation. Unlike the mechanical behavior, the increase in martensite volume fraction in steel does not exhibit a direct relationship with their corrosion resistance behavior. The corrosion mechanism in DP steels having different martensite and ferrite volume fractions depends on the self-corrosion resistance behavior of both the phases as well as the occurrence of galvanic corrosion between them.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. G. Dini, A. Najafizadeh, R. Ueji, and S.M. Monir-Vaghefi, Tensile Deformation Behavior of High Manganese Austenitic Steel: The Role of Grain Size, Mater. Des., 2010, 31(7), p 3395–340210.1016/j.matdes.2010.01.049 ↗
2. A.J. Abdalla, L.R.O. Hein, M.S. Pereira, and T.M. Hashimoto, Mechanical Behaviour of Strain Aged Dual Phase Steels, Mater. Sci. Technol., 1999, 15(10), p 1167–117010.1179/026708399101505211 ↗
3. B. Mintz, Hot dip Galvanising of Transformation Induced Plasticity and Other Intercritically Annealed Steels, Int. Mater. Rev., 2001, 46(4), p 169–19710.1179/095066001771048754 ↗
4. R. Bode, M. Meurer, T.W. Schaumann, W. Warnecke, Selection and Use of Coated Advanced High-Strength Steels for Automotive Applications, in Proceedings of the Galvatech Conference, Chicago, 2004, pp. 107–118
5. D.K. Mondal and R.K. Ray, Microstructural Changes and Kinetics of Recrystallisation in a Few Dual-Phase Steels, Steel Res., 1989, 60(1), p 33–4010.1002/srin.198900960 ↗
6. A.K. Lis and B. Gajda, Modelling of the DP and TRIP Microstructure in the CMnAlSi Automotive Steel, J. Achiev. Mater. Manuf. Eng., 2006, 15(1–2), p 127–134
7. S. Gunduz and A. Tosun, Influence of Straining and Ageing on the Room Temperature Mechanical Properties of Dual Phase Steel, Mater. Des., 2008, 29(10), p 1914–191810.1016/j.matdes.2008.04.028 ↗
8. R.G. Davies, The Deformation Behavior of a Vanadium-Strengthened Dual Phase Steel, Met. Trans. A., 1978, 9(1), p 41–5210.1007/BF02647169 ↗
9. J.Y. Koo and G. Thomas, Design of Duplex Fe/X/0.1C Steels for Improved Mechanical Properties, Met. Trans. A, 1977, 8(3), p 525–52810.1007/BF02661770 ↗
10. B. Ehrhardt, T. Berger, H. Hofmann, and T.W. Schaumann, Property related Design of Advanced Cold Rolled Steels with Induced Plasticity, Steel Grips, 2004, 2, p 247–255
11. http://www.ulsab-avc.org , Advanced High Strength Steel Application Guidelines
12. S.M. Kang and H. Kwon, Fracture Behavior of Intercritically Treated Complex Structure in Medium-Carbon 6Ni Steel, Met. Trans. A, 1987, 18(9), p 1587–159210.1007/BF02646142 ↗
13. J.C. Ernest, Development of low-carbon, copper- strengthened HSLA steel plate for naval ship construction. Report DTRC-SME-90/21, David Taylor Research Center, Bethesda, MD, 1990
14. C.C. Tasan, M. Diehl, D. Yan, M. Bechtold, F. Roters, L. Schemmann, C. Zheng, N. Peranio, D. Ponge, M. Koyama, K. Tsuzaki, and D. Raabe, An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design, Annu. Rev. Mater. Res., 2015, 45, p 391–43110.1146/annurev-matsci-070214-021103 ↗
15. A. Kumar, S.B. Singh, and K.K. Ray, Influence of Bainite/Martensite-Content on the Tensile Properties of Low Carbon Dual-Phase Steels, Mater. Sci. Eng. A, 2008, 474(1–2), p 270–28210.1016/j.msea.2007.05.007 ↗
16. A. Bayram, A. Uguz, and M. Ula, Effect of Microstructure and Notches on the Mechanical Properties of Dual-Phase Steels, Mater. Charact., 1999, 43, p 259–26910.1016/S1044-5803(99)00044-3 ↗
17. J. Adamczyk, Development of the Microalloyed Constructional Steels, J. Achiev. Mater. Manuf. Eng., 2006, 14, p 9–20
18. J. Zrnik, T. Kvackaj, P. Hornak, V. Vrchovinsky, Thermomechanical treatment of HSLA steel QStE480MC, in Proceedings of the 11th Scientific International Conference “Achievements in Mechanical and Materials Engineering” AMME’2002, Gliwice-Zakopane, 2002, pp. 641–644
19. J. Adamczyk, Manufacturing of Mass-Scale Products from Structural Microalloyed Steels in Integrated Production Lines, J. Achiev. Mater. Manuf. Eng., 2007, 20, p 399–402
20. A.K. Lis, W. Glinski, J. Lis, Modelling of Microstructure Development for Thermomechanical Rolling in (α + γ) Temperature Range, in Proceedings of the 12th Scientific International Conference “Achievements in Mechanical and Materials Engineering” AMME’2003, Gliwice-Zakopane, 2003, pp. 609–612
21. A.K. Panda, R.I. Ganguly, D.S. Sarma, R.C. Gupta, and S. Misra, Effect of Thermomechanical Treatment on Structure and Mechanical Properties of Mo-Bearing Dual Phase Steel, Steel Res., 1995, 66(7), p 309–31710.1002/srin.199501130 ↗
22. D.A. Korzekwa, D.K. Matlock, and G. Krauss, Dislocation Substructure as a Function of Strain in a Dual-Phase Steel, Met. Trans. A, 1984, 15(6), p 1221–122810.1007/BF02644716 ↗
23. L.F. Ramos, D.K. Matlock, and G. Krauss, On the Deformation Behavior of Dual-Phase Steels, Met. Trans. A, 1979, 10(2), p 259–26110.1007/BF02817636 ↗
24. R.G. Davies, The Mechanical Properties of Zero-Carbon Ferrite-Plus-Martensite Structures, Met. Trans. A, 1978, 9(3), p 451–45510.1007/BF02646397 ↗
25. L. Schemmann, S. Zaefferer, D. Raabe, F. Friedel, and D. Mattissen, Alloying Effects on Microstructure Formation of Dual Phase Steels, Acta Mater., 2015, 95, p 386–39810.1016/j.actamat.2015.05.005 ↗
26. N. Peranio, Y.J. Li, F. Roters, and D. Raabe, Microstructure and Texture Evolution in Dual-Phase Steels: Competition Between Recovery, Recrystallization, and Phase Transformation, Mater. Sci. Eng. A, 2010, 527, p 4161–416810.1016/j.msea.2010.03.028 ↗
27. D. Yan, C.C. Tasan, and D. Raabe, High Resolution In Situ Mapping of Microstrain and Microstructure Evolution Reveals Damage Resistance Criteria in Dual Phase Steels, Acta Mater., 2015, 96, p 399–40910.1016/j.actamat.2015.05.038 ↗
28. C.C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters, and D. Raabe, Integrated experimental–Simulation Analysis of Stress and Strain Partitioning in Multiphase Alloys, Acta Mater., 2014, 81, p 386–40010.1016/j.actamat.2014.07.071 ↗
29. M. Calcagnotto, D. Ponge, and D. Raabe, On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels, Metall. Mater. Trans. A, 2011, 43(1), p 37–4610.1007/s11661-011-0828-3 ↗
30. M. Calcagnotto, Y. Adachi, D. Ponge, and D. Raabe, Deformation and Fracture Mechanisms in Fine- and Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels and the Effect of Aging, Acta Mater., 2011, 59(2), p 658–67010.1016/j.actamat.2010.10.002 ↗
31. M. Calcagnotto, D. Ponge, and D. Raabe, Effect of Grain Refinement to 1 μm on Strength and Toughness of Dual-Phase Steels, Mater. Sci. Eng. A, 2010, 527(29–30), p 7832–784010.1016/j.msea.2010.08.062 ↗
32. M.H. Akbarpour and A. Ekrami, Effect of Temperature on Flow and Work Hardening Behavior of High Bainite Dual Phase (HBDP) Steels, Mater. Sci. Eng. A, 2008, 475(1–2), p 293–29810.1016/j.msea.2007.04.099 ↗
33. X. Liang, J. Li, and Y.H. Peng, Effect of Water Quench Process on Mechanical Properties of Cold Rolled Dual Phase Steel Microalloyed with Niobium, Mater. Lett., 2008, 62(2), p 327–32910.1016/j.matlet.2007.05.034 ↗
34. S.S. Hansen and R.R. Pradhan, Structure/Property Relationships and Continuous Yielding Behaviour in Dual-Phase Steels, Fundamentals of Dual Phase Steels, R.A. Kot and B.L. Bramfitt, Ed., AIME, Warrendale, 1981, p 113–144
35. R.G. Davies, Influence of Martensite Composition and Content on the Properties of Dual Phase Steels, Met. Trans. A, 1978, 9, p 671–67910.1007/BF02659924 ↗
36. R.G. Davies, Early Stages of Yielding and Strain Aging of a Vanadium-Containing Dual-Phase Steel, Met. Trans. A, 1979, 10(10), p 1549–155510.1007/BF02812021 ↗
37. R. Khondker, A. Mertens, and J.R. McDermid, Effect of Annealing Atmosphere on the Galvanizing Behavior of a Dual-Phase Steel, Mater. Sci. Eng. A, 2007, 463(1–2), p 157–16510.1016/j.msea.2006.09.116 ↗
38. P.P. Sarkar, P. Kumar, Manas Kumar Manna, and P.C. Chakraborti, Microstructural Influence on the Electrochemical Corrosion Behaviour of Dual-Phase Steels in 3.5% NaCl Solution, Mater. Lett., 2005, 59(19–20), p 2488–249110.1016/j.matlet.2005.03.030 ↗
39. O. Kelestemur and S. Yıldız, Effect of Various Dual-Phase Heat Treatments on the Corrosion Behavior of Reinforcing Steel Used in the Reinforced Concrete Structures, Constr. Build. Mater., 2009, 23, p 78–8410.1016/j.conbuildmat.2008.02.001 ↗
40. R. Nadlene, H. Esah, S. Norliana, and M.A. Mohd Irwan, Study on the Effect of Volume Fraction of Dual Phase Steel to Corrosion Behaviour and Hardness, Int. J. Mech. Mechatron. Eng., 2011, 5(2), p 393–396
41. C. Zhang, D. Cai, B. Liao, T. Zhao, and Y. Fan, A Study on the Dual-Phasetreatment of Weathering steel 09CuPCrNi, Mater. Lett., 2004, 58, p 1524–152910.1016/j.matlet.2003.10.018 ↗
42. K.W. Andrews, Empirical Formulae for the Calculation of Some Transformation Temperatures, J. Iron Steel Inst., 1965, 203, p 721–727
43. J. Adamczyk and A. Grajcar, Heat Treatment and Mechanical Properties of Low-Carbon Steel with Dual-Phase Microstructure, J. Achiev. Mater. Manuf. Eng., 2007, 22(1), p 13–20
44. D.A. Jones, Principles and Prevention of Corrosion, Prentice-Hall, NJ, 1996
45. K. Kocatepe, M. Cerah, and M. Erdogan, Effect of Martensite Volume Fraction and Its Morphology on the Tensile Properties of Ferritic Ductile Iron with Dual Matrix Structures, J. Mater. Proc. Technol., 2006, 178(1–3), p 44–5110.1016/j.jmatprotec.2005.11.019 ↗
46. F. Hayat and H. Uzun, Microstructural and Mechanical Properties of Dual-Phase Steels Welded Using GMAW with Solid and Flux-Cored Welding Wires, Int. J. Mater. Res., 2012, 103(7), p 828–83710.3139/146.110702 ↗
47. A.K. Lis and B. Gajda, Modelling of the DP and TRIP Microstructure in the CMnAlSi Automotive Steel, J. Achiev. Mater. Manuf. Eng., 2006, 15, p 127–134
48. P.R. Mould, C.C. Skena, Structure and Properties of Cold-Rolled Ferrite Martensite (Dual Phase) Steel Sheets, in Proceedings on Formable HSLA and Dual-Phase Steels, ed. by R.A. Kot, J.W. Morris (AIME, New York, 1979), pp. 183–205
49. F. Hayat and H. Uzun, Effect of Heat Treatment on Microstructure, Mechanical Properties and Fracture Behaviour of Ship and Dual Phase Steels, J. Iron Steel Res. Int., 2011, 18(8), p 65–7210.1016/S1006-706X(11)60106-4 ↗
50. M.S. Rashid, Relationship Between Steel Microstructure and Formability, Formable HSLA and Dual Phase Steels, A.T. Davenport, Ed., Metallurgical Society of AIME, New York, 1979, p 1–24
51. A. Bag, K.K. Ray, and E.S. Dwarakadasa, Influence of Martensite Content and Morphology on Tensile and Impact Properties of High-Martensite Dual-Phase Steels, Metall. Mater. Trans. A, 1999, 30(5), p 1193–120210.1007/s11661-999-0269-4 ↗
52. Y. Tomita, Effect of Morphology of Second-Phase Martensite on Tensile Properties of Fe-0.1C Dual Phase Steels, J. Mater. Sci., 1990, 25(12), p 5179–518410.1007/BF00580148 ↗
53. T.S. Byun and I.S. Kim, Tensile Properties and Inhomogeneous Deformation of Ferrite–Martensite Dual-Phase Steels, J. Mater. Sci., 1993, 28(11), p 2923–293210.1007/BF00354695 ↗
54. N.K. Balliger and T. Gladman, Work Hardening of Dualphase Steels, Met. Sci., 1981, 15, p 95–10810.1179/030634581790426615 ↗
55. A.F. Szewczyk and J. Gurland, A Study of the Deformation and Fracture of a Dual-Phase Steel, Met. Trans. A, 1982, 13(10), p 1821–182610.1007/BF02647838 ↗
56. H.P. Shen, T.C. Lei, and J.Z. Liu, Microscopic Deformation Behaviour of Martensitic–ferritic Dual-Phase Steels, Mater. Sci. Technol., 1986, 2(1), p 28–3310.1179/mst.1986.2.1.28 ↗
57. D. Suh, D. Kwon, S. Lee, and N.J. Kim, Orientation Dependence of Microfracture Behavior in a Dual-Phase High-Strength Low-Alloy Steel, Metall. Mater. Trans. A, 1997, 28(2), p 504–50910.1007/s11661-997-0152-0 ↗
58. J. Kang, Y. Ososkov, J.D. Embury, and D.S. Wilkinson, Digital Image Correlation Studies for Microscopic Strain Distribution and Damage in Dual Phase Steels, Scr. Mater., 2007, 56(11), p 999–100210.1016/j.scriptamat.2007.01.031 ↗
59. H. Ghadbeigi, C. Pinna, S. Celotto, and J.R. Yates, Local Plastic Strain Evolution in a High Strength Dual-Phase Steel, Mater. Sci. Eng. A, 2010, 527(18–19), p 5026–503210.1016/j.msea.2010.04.052 ↗
60. M. Mazinani and W.J. Poole, Effect of Martensite Plasticity on the Deformation Behavior of a Low-Carbon Dual-Phase Steel, Metall. Mater. Trans. A, 2007, 38(2), p 328–33910.1007/s11661-006-9023-3 ↗
61. G. Avramovic-Cingara, C.A.R. Saleh, M.K. Jain, and D.S. Wilkinson, Void Nucleation and Growth in Dual-Phase Steel 600 During Uniaxial Tensile Testing, Metall. Mater. Trans. A, 2009, 40(13), p 3117–312710.1007/s11661-009-0030-z ↗
62. G. Avramovic-Cingara, Y. Ososkov, M.K. Jain, and D.S. Wilkinson, Effect of Martensite Distribution on Damage Behaviour in DP600 Dual Phase Steels, Mater. Sci. Eng. A, 2009, 516(1–2), p 7–1610.1016/j.msea.2009.03.055 ↗
63. X.J. He, N. Terao, and A. Berghezan, Influence of Martensite Morphology and Its Dispersion on Mechanical Properties and Fracture Mechanisms of Fe–Mn–C Dual Phase Steels, Met. Sci., 1984, 18(7), p 367–37310.1179/030634584790419953 ↗
64. J.P.M. Hoefnagels, C.C. Tasan, F. Maresca, F.J. Peters, and V.G. Kouznetsova, Retardation of Plastic Instability Via Damage-Enabled Micro-Strain Delocalization, J. Mater. Sci., 2015, 50(21), p 6882–689710.1007/s10853-015-9164-0 ↗
65. E. Mairea, O. Bouazizb, M. Di Michielc, and C. Verdua, Initiation and Growth of Damage in a Dual-Phase Steel Observed by X-Ray Microtomography, Acta Mater., 2008, 56(18), p 4954–496410.1016/j.actamat.2008.06.015 ↗
66. K. Fushimia, K. Yanagisawab, T. Nakanishia, Y. Hasegawaa, T. Kawanoc, and M. Kimurac, Microelectrochemistry of Dual-Phase Steel Corroding in 0.1 M Sulfuric Acid, Electrochim. Acta, 2013, 114, p 83–8710.1016/j.electacta.2013.09.162 ↗
67. W.R. Osorio, L.C. Peixoto, L.R. Garcia, and A. Garcia, Electrochemical Corrosion Response of a Low Carbon Heat Treated Steel in a NaCl Solution, Mater. Corros., 2009, 60, p 804–81210.1002/maco.200805181 ↗
68. L.R. Bhagavathi, G.P. Chaudhari, and S.K. Nath, Mechanical and Corrosion Behavior of Plain Low Carbon Dual-Phase Steels, Mater. Des., 2011, 32(1), p 433–44010.1016/j.matdes.2010.06.025 ↗