Microstructure and Corrosion Properties of Laser-Welded SAF 2507 Super Duplex Stainless Steel Joints
Source abstract
Abstract
SAF 2507 super duplex stainless steel has been welded using laser beam (LB) welding and laser/gas metal arc hybrid (LGH) welding processes. The pitting and intergranular corrosion properties of the welding joints have been tested using electrochemical testing and microstructure observations. The volume fraction of the ferrite phase reaches 70% in the weld zone of the LB welding joint, while the volume fraction of the ferrite phase is 60% for the welding joint of LGH due to the introduction of Ni from welding wire. The pitting corrosion resistance of the welding joint for LB is better than that of LGH. The pitting corrosion is easily conceived in the heat-affected zone (HAZ) because of the formation of Cr2N in the HAZ during welding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. R. Silverstein and D. Eliezer, Mechanisms of Hydrogen Trapping in Austenitic, Duplex, and Super Martensitic Stainless Steels, J. Alloys Compd., 2017, 720, p 451–45910.1016/j.jallcom.2017.05.286 ↗
2. Z. Cui, L. Wang, H. Ni, W. Hao, C. Man, S. Chen, X. Wang, Z. Liu, and X. Li, Influence of Temperature on the Electrochemical and Passivation Behavior of 2507 Super Duplex Stainless Steel in Simulated Desulfurized Flue Gas Condensates, Corros. Sci., 2017, 118, p 31–4810.1016/j.corsci.2017.01.016 ↗
3. Z. Zhang, H. Zhao, H. Zhang, H. Jun, and J. Jin, Microstructure Evolution and Pitting Corrosion Behavior of UNS S32750 Super Duplex Stainless Steel Welds After Short-Time Heat Treatment, Corros. Sci., 2017, 121, p 22–3110.1016/j.corsci.2017.02.006 ↗
4. S.S.M. Tavares, J.M. Pardal, L.D. Lima, I.N. Bastos, A.M. Nascimento, and J.A. de Souza, Characterization of Microstructure, Chemical Composition, Corrosion Resistance and Toughness of a Multipass Weld Joint of Super Duplex Stainless Steel UNS S32750, Mater. Charact., 2007, 58, p 610–61610.1016/j.matchar.2006.07.006 ↗
5. R. Cervo, P. Ferro, and A. Tiziani, Annealing Temperature Effects on Super Duplex Stainless Steel UNS S32750 Welded Joints. I: Microstructure and Partitioning of Elements, J. Mater. Sci., 2010, 45(2010), p 4369–437710.1007/s10853-010-4310-1 ↗
6. R. Cervo, P. Ferro, A. Tiziani, and F. Zucchi, Annealing Temperature Effects on Super Duplex Stainless Steel UNS S32750 Welded Joints. II: Pitting Corrosion Resistance Evaluation, J. Mater. Sci., 2010, 45(2010), p 4378–438910.1007/s10853-010-4311-0 ↗
7. B. Senthilkumar and T. Kannan, Effect of Flux Cored Arc Welding Process Parameters on Bead Geometry in Super Duplex Stainless Steel Claddings, Measurement, 2015, 62, p 127–13610.1016/j.measurement.2014.11.007 ↗
8. J. Verma and R.V. Taiwade, Effect of Welding Processes and Conditions on the Microstructure, Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Weldments—A Review, J. Manuf. Process., 2017, 25, p 134–15210.1016/j.jmapro.2016.11.003 ↗
9. F. Mirakhorli, F. Malek Ghaini, and M.J. Torkamany, Development of Weld Metal Microstructures in Pulsed Laser Welding of Duplex Stainless Steel, J. Mater. Eng. Perform., 2012, 21, p 2173–217610.1007/s11665-012-0141-3 ↗
10. K. Devendranath Ramkumar, D. Mishra, M.K. Vignesh, B. Ganesh Raj, N. Arivazhagan, S. Vitesh Naren, and S. Suresh Kumar, Metallurgical and Mechanical Characterization of Electron Beam Welded Super-Duplex Stainless Steel UNS 32750, J. Manuf. Process., 2014, 16, p 527–53410.1016/j.jmapro.2014.07.011 ↗
11. Y. Yang, Z. Wang, H. Tan, J. Hong, Y. Jiang, L. Jiang, and J. Li, Effect of a Brief Post-Weld Heat Treatment on the Microstructure Evolution and Pitting Corrosion of Laser Beam Welded UNS S31803 Duplex Stainless Steel, Corros. Sci., 2012, 65, p 472–48010.1016/j.corsci.2012.08.054 ↗
12. B. Ribic, T.A. Palmer, and T. DebRoy, Problems and Issues in Laser-Arc Hybrid Welding, Int. Mater. Rev., 2009, 54, p 223–24410.1179/174328009X411163 ↗
13. R. Li, Z. Li, Y. Zhu, and L. Rong, A Comparative Study of Laser Beam Welding and Laser-MIG Hybrid Welding of Ti-Al-Zr-Fe Titanium Alloy, Mater. Sci. Eng., A, 2011, 528, p 1138–114210.1016/j.msea.2010.09.084 ↗
14. C. Zheng, L. Cai, Z. Tang, and X. Shen, The Inhibition Effect of the Molybdate on Hydrogen Permeation of 2205 Duplex Stainless Steel, Surf. Coat. Technol., 2016, 287, p 153–15910.1016/j.surfcoat.2015.12.077 ↗
15. C. Zheng and G. Yi, Investigating the Influence of Hydrogen on Stress Corrosion Cracking of 2205 Duplex Stainless Steel in Sulfuric Acid by Electrochemical Impedance Spectroscopy, Corros. Rev., 2017, 35, p 23–3310.1515/corrrev-2016-0060 ↗
16. V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, and S. Sundaresan, Effect of Weld Metal Chemistry and Heat Input on the Structure and Properties of Duplex Stainless Steel Welds, Mater. Sci. Eng., A, 2003, 358, p 9–1610.1016/S0921-5093(03)00077-7 ↗
17. V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, and S. Sundaresan, Effect of Nickel and Nitrogen Addition on the Microstructure and Mechanical Properties of Power Beam Processed Duplex Stainless Steel (UNS 31803) Weld Metals, Mater. Lett., 2005, 59, p 2305–230910.1016/j.matlet.2005.03.010 ↗
18. K. Migiakis and G.D. Papadimitriou, Effect of Nitrogen and Nickel on the Microstructure and Mechanical Properties of Plasma Welded UNS S32760 Super-Duplex Stainless Steels, J. Mater. Sci., 2009, 44, p 6372–638310.1007/s10853-009-3878-9 ↗
19. S.T. Kim, I.S. Lee, J.S. Kim, S.H. Jang, Y.S. Park, K.T. Kim, and Y.S. Kim, Investigation of the Localized Corrosion Associated with Phase Transformation of Tube-to-Tube Sheet Welds of Hyper Duplex Stainless Steel in Acidified Chloride Environments, Corros. Sci., 2012, 64, p 164–17310.1016/j.corsci.2012.07.014 ↗
20. Z.Q. Zhang, H.Y. Jing, L.Y. Xu, Y.D. Han, L. Zhao, and X.Q. Lv, Effect of Post-Weld Heat Treatment on Microstructure Evolution and Pitting Corrosion Resistance of Electron Beam-Welded Duplex Stainless Steel, Corros. Sci., 2018, 141, p 30–4510.1016/j.corsci.2018.06.030 ↗
21. Z.Q. Zhang, H.Y. Jing, L.Y. Xu, Y.D. Han, L. Zhao, and J.L. Zhang, Influence of Microstructure and Elemental Partitioning on Pitting Corrosion Resistance of Duplex Stainless Steel Welding Joints, Appl. Surf. Sci., 2017, 394, p 297–31410.1016/j.apsusc.2016.10.047 ↗