Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint
Source abstract
Abstract
Both experimental method and numerical simulation technology were employed to investigate welding residual stress distribution in a SUS304 steel multi-pass butt-welded joint in the current study. The main objective is to clarify the influence of strain hardening model and the yield strength of weld metal on prediction accuracy of welding residual stress. In the experiment, a SUS304 steel butt-welded joint with 17 passes was fabricated, and the welding residual stresses on both the upper and bottom surfaces of the middle cross section were measured. Meanwhile, based on ABAQUS Code, an advanced computational approach considering different plastic models as well as annealing effect was developed to simulate welding residual stress. In the simulations, the perfect plastic model, the isotropic strain hardening model, the kinematic strain hardening model and the mixed isotropic-kinematic strain hardening model were employed to calculate the welding residual stress distributions in the multi-pass butt-welded joint. In all plastic models with the consideration of strain hardening, the annealing effect was also taken into account. In addition, the influence of the yield strength of weld metal on the simulation result of residual stress was also investigated numerically. The conclusions drawn by this work will be helpful in predicting welding residual stresses of austenitic stainless steel welded structures used in nuclear power plants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fatigue and fracture mechanics · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A. Hinojos, J. Mireles, A. Reichardt, P. Frigola, P. Hosemann, and L.E. Murr, Joining of Inconel 718 and 316 Stainless Steel Using Electron Beam Melting Additive Manufacturing Technology, Mater. Des., 2016, 94, p 17–2710.1016/j.matdes.2016.01.041 ↗
2. Y. Ye, J. Cai, X. Jiang, D. Dai, and D. Deng, Influence of Groove Type on Welding-Induced Residual Stress, Deformation and Width of Sensitization Region in a SUS304 Steel Butt-Welded Joint, Adv. Eng. Softw., 2015, 86, p 39–4810.1016/j.advengsoft.2015.04.001 ↗
3. T. Terachi, T. Yamada, T. Miyamoto, and K. Arioka, SCC Growth Behaviors of Austenitic Stainless Steels in Simulated PWR Primary Water, J. Nucl. Mater., 2012, 426, p 59–7010.1016/j.jnucmat.2012.03.013 ↗
4. M. Vinoth Kumar, V. Balasubramanian, S. Rajakumar, and S.K. Albert, Stress Corrosion Cracking Behaviour of Gas Tungsten Arc Welded Super Austenitic Stainless Steel Joints, Def. Technol., 2015, 11, p 282–29110.1016/j.dt.2015.05.009 ↗
5. A. Elmesalamy, J.A. Francis, and L. Li, A Comparison of Residual Stresses in Multi Pass Narrow Gap Laser Welds and Gas-Tungsten Arc Welds in AISI, 316L Stainless Steel, Int. J. Press. Vessels Pip., 2014, 113, p 49–5910.1016/j.ijpvp.2013.11.002 ↗
6. L. Tan, J. Zhang, D. Zhuang, and C. Liu, Influences of Lumped Passes on Welding Residual Stress of a Thick-Walled Nuclear Rotor Steel Pipe by Multi-pass Narrow Gap Welding, Nucl. Eng. Des., 2014, 273, p 47–5710.1016/j.nucengdes.2014.01.024 ↗
7. K. Ogawa, D. Deng, S. Kiyoshima, N. Yanagida, and K. Saito, Investigations on Welding Residual Stresses in Penetration Nozzles by Means of 3D Thermal Elastic Plastic FEM and Experiment, Comput. Mater. Sci., 2009, 45, p 1031–104210.1016/j.commatsci.2009.01.008 ↗
8. P. Dong and F.W. Brust, Welding residual Stresses and Effects on Fracture in Pressure Vessel and Piping Components: A Millennium Review and Beyond, J. Pres.Vessel Technol. Trans. ASME, 2000, 122, p 329–33810.1115/1.556189 ↗
9. W. Liang, H. Murakawa, and D. Deng, Investigation of Welding Residual Stress Distribution in a Thick-Plate Joint with an Emphasis on the Features Near Weld End-Start, Mater. Des., 2015, 67, p 303–31210.1016/j.matdes.2014.11.037 ↗
10. D. Deng, Influence of Deposition Sequence on Welding Residual Stress and Deformation in an Austenitic Stainless Steel J-Groove Welded Joint, Mater. Des., 2013, 49, p 1022–103310.1016/j.matdes.2013.02.065 ↗
11. L. Lindgren, K. Domkin, and S. Hansson, Dislocations, Vacancies and Solute Diffusion in Physical Based Plasticity Model for AISI, 316L, Mech. Mater., 2008, 40, p 907–91910.1016/j.mechmat.2008.05.005 ↗
12. M.C. Smith, P.J. Bouchard, M. Turski, L. Edwards, and R.J. Dennis, Accurate Prediction of Residual Stress in Stainless Steel Welds, Comput. Mater. Sci., 2012, 54, p 312–32810.1016/j.commatsci.2011.10.024 ↗
13. Dean Deng and Kiyoshima Shoichi, Numerical Simulation of Welding Residual Stresses in a Multi-pass Butt-Welded Joint of Austenitic Stainless Steel Using Variable Length Heat Source, Acta Metall. Sin., 2010, 02, p 195–20010.3724/SP.J.1037.2009.00521 ↗
14. D. Qiao, W. Zhang, Z. Feng, High-Temperature Constitutive Behavior of Austenitic Stainless Steel for Weld Residual Stress Modeling. ASME 2012 Pressure Vessels and Piping Conference, American Society of Mechanical Engineers. (2012) pp. 1229–123610.1115/PVP2012-78615 ↗
15. P. Gilles, W. El-Ahmar, and J. Jullien, Robustness Analyses of Numerical Simulation of Fusion Welding NeT-TG1 Application: “Single Weld-Bead-on-Plate”, Int. J. Press. Vessels Pip., 2009, 86, p 3–1210.1016/j.ijpvp.2008.11.012 ↗
16. E.F. Rybicki, D.W. Schmueser, and R.W. Stonesifer, A Finite-Element Model for Residual Stresses and Deflections in Girth-Butt-Welded Pipes, J. Press. Vessel Technol., 1978, 100, p 256–26210.1115/1.3454464 ↗
17. Y. Ueda, K. Nakacho, and T. Shimizu, Improvement of Residual Stresses of Circumferential Joint of Pipe by Heat-Sink Welding, J. Press. Vessel Technol., 1986, 108, p 14–2310.1115/1.3264746 ↗
18. Y. Javadi, M. Akhlaghi, and M.A. Najafabadi, Using Finite Element and Ultrasonic Method to Evaluate Welding Longitudinal Residual Stress Through the Thickness in Austenitic Stainless Steel Plates, Mater. Des., 2013, 45, p 628–64210.1016/j.matdes.2012.09.038 ↗
19. D. Deng, H. Murakawa, and W. Liang, Numerical and Experimental Investigations on Welding Residual Stress in Multi-pass Butt-Welded Austenitic Stainless Steel Pipe, Comput. Mater. Sci., 2008, 42, p 234–24410.1016/j.commatsci.2007.07.009 ↗
20. J.L. Chaboche, A Review of Some Plasticity and Visco-plasticity Constitutive Theories, Int. J. Plast., 2008, 24, p 1642–169310.1016/j.ijplas.2008.03.009 ↗
21. O. Muránsky, M.C. Smith, P.J. Bendeich, T.M. Holden, V. Luzin, R.V. Martins, and L. Edwards, Comprehensive Numerical Analysis of a Three-Pass Bead-in-Slot Weld and Its Critical Validation Using Neutron and Synchrotron Diffraction Residual Stress Measurements, Int. J. Solids Struct., 2012, 49, p 1045–106210.1016/j.ijsolstr.2011.07.006 ↗
22. J.J. Xu, P. Gilles, Y.G. Duan, and C. Yu, Temperature and Residual Stress Simulations of the NeT Single-Bead-on-Plate Specimen Using SYSWELD, Int. J. Press. Vessels Pip., 2012, 99, p 51–60
23. O. Muránsky, C.J. Hamelin, M.C. Smith, P.J. Bendeich, and L. Edwards, The Effect of Plasticity Theory on Predicted Residual Stress Fields in Numerical Weld Analyses, Comput. Mater. Sci., 2012, 54, p 125–13410.1016/j.commatsci.2011.10.026 ↗
24. Dean Deng and Kiyoshima Shoichi, Influence of Annealing Temperature on Calculation Accuracy of Welding Residual in a SUS304 Stainless Steel Joint, Acta Metall. Sin., 2014, 05, p 626–632
25. O. Muránsky, C.J. Hamelin, V.I. Patel, V. Luzin, and C. Braham, The Influence of Constitutive Material Models on Accumulated Plastic Strain in Finite Element Weld Analyses, Int. J. Solids Struct., 2015, 69, p 518–53010.1016/j.ijsolstr.2015.04.032 ↗
26. H.X. Yuan, Y.Q. Wang, Y.J. Shi, and L. Gardner, Residual Stress Distributions in Welded Stainless Steel Sections, Thin-Walled Struct., 2014, 79, p 38–5110.1016/j.tws.2014.01.022 ↗
27. S. Kiyoshima, D. Deng, K. Ogawa, N. Yanagida, and K. Saito, Influences of Heat Source Model on Welding Residual Stress and Distortion in a Multi-pass J-Groove Joint, Comput. Mater. Sci., 2009, 46, p 987–99510.1016/j.commatsci.2009.05.002 ↗
28. ABAQUS/Standard User’s Manuals, volumes 1, 2, 3 and 4, Version 6.7, SIMULIA, 2007
29. J. Goldak, A. Chakravarti, and M. Bibby, A New Finite Element Model for Welding Heat Sources, Metall. Trans. B, 1984, 15, p 299–30510.1007/BF02667333 ↗
30. H. Murakawa, N. Ma, and H. Huang, Iterative Substructure Method Employing Concept of Inherent Strain for Large-Scale Welding Problems, Welding in the World., 2015, 59, p 53–6310.1007/s40194-014-0178-z ↗
31. D. Deng and H. Murakawa, Numerical Simulation of Temperature Field and Residual Stress in Multi-pass Welds in Stainless Steel Pipe and Comparison with Experimental Measurements, Comput. Mater. Sci., 2006, 37, p 269–27710.1016/j.commatsci.2005.07.007 ↗
32. B. Brickstad and B.L. Josefson, A Parametric Study of Residual Stresses in Multi-pass Butt-Welded Stainless Steel Pipes, Int. J. Press. Vessels Pip., 1998, 75, p 11–2510.1016/S0308-0161(97)00117-8 ↗
33. J. Cai, Y. Ye, Y. Deng, and D. Zhang, Study on Influences of Groove Type on Welding Residual Stress and Deformation in Q345/SUS304 Dissimilar Steel Butt-Welded Joints, J. Mech. Eng., 2015, 51(10), p 55–6110.3901/JME.2015.10.055 ↗
34. D. Deng, S. Kiyoshima, K. Ogawa, N. Yanagida, and K. Saito, Predicting Welding Residual Stresses in a Dissimilar Metal Girth Welded Pipe Using 3D Finite Element Model with a Simplified Heat Source, Nucl. Eng. Des., 2011, 241, p 46–5410.1016/j.nucengdes.2010.11.010 ↗
35. JIS Z3111-2005, Methods of Tension and Impact Tests for Deposited Metal[S], Japanese Standards Association, Tokyo, 2005