The Effect of Surface Roughness on the Corrosion Properties of Type AISI 304 Stainless Steel in Diluted NaCl and Urban Rain Solution

Due to their good corrosion resistance, favorable mechanical properties, and reasonable price regarding their excellent properties, austenitic stainless steels have, over recent decades, become one of the alloys that are increasingly used in civil engineering and building, as well as for specific architectural purposes. Architects often design stainless steel exterior elements with higher surface roughnesses, which are not resistant to corrosion processes. The aim of this work was to investigate the influence of different types of surface finishes to stainless steel of quality AISI 304 on the corrosion properties of this steel. In order to achieve this goal, electrochemical tests were performed on different surface finishes in two different environments: in an NaCl aqueous solution, and in simulated urban rain which contained no chlorides. In addition to the electrochemical methods used, surface roughness was also measured, and XPS surface analyses were performed. The results of the investigation showed that surface roughness affects the growth of the passive layer in urban rain significantly; however, the growth of such a film is retarded in the case of the NaCl aqueous solution. Based on the results of the performed analyses, it was found that, in the NaCl solution, the pitting potential depended strongly upon the surface roughness and the surface finish, but this was not true for the samples tested in urban rain.