A Review of Texture Evolution Mechanisms During Deformation by Rolling in Aluminum Alloys
Source abstract
Abstract
The current understanding of texture evolution during deformation by rolling in aluminum alloys was summarized. This included understanding the evolution mechanisms and several key factors of initial texture, microstructure, alloy composition, deformation temperature, stress–strain condition, and rolling geometry. Related models on predicting texture evolution during rolling were also discussed. Finally, for this research field, the recommendations for controlling the formation of rolling textures were proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. T. Zhai, A.J. Wilkinson, and J.W. Martin, A Crystallographic Mechanism For Fatigue Crack Propagation Through Grain Boundaries, Acta Mater., 2000, 48, p 4917–492710.1016/S1359-6454(00)00214-7 ↗
2. J.X. Li, T. Zhai, M.D. Garratt, and G.H. Bray, Four-Point-Bend Fatigue of AA 2026 Aluminum Alloys, Metall. Mater. Trans. A, 2005, 36, p 2529–253910.1007/s11661-005-0126-z ↗
3. T. Zhai, X.P. Jiang, J.X. Li, M.D. Garratt, and G.H. Bray, The Grain Boundary Geometry for Optimum Resistance to Growth of Short Fatigue Cracks in High Strength Al-Alloys, Int. J. Fatigue, 2005, 27, p 1202–120910.1016/j.ijfatigue.2005.06.021 ↗
4. Z.Y. Liu, F.D. Li, P. Xia, S. Bai, Y.X. Gu, D.E. Yu, and S.M. Zeng, Mechanisms for Goss-Grains Induced Crack Deflection and Enhanced Fatigue Crack Propagation Resistance in Fatigue Stage II, of an AA2524 Alloy, Mater. Sci. Eng., A, 2015, 625, p 271–27710.1016/j.msea.2014.12.021 ↗
5. F.D. Li, Z.Y. Liu, W.T. Wu, Q. Zhao, S. Bai, X.H. Wang, and G.H. Fan, Slip Band Formation in Plastic Deformation Zone at Crack Tip in Fatigue Stage II, of 2xxx Aluminum Alloys, Int. J. Fatigue, 2016, 91, p 68–7810.1016/j.ijfatigue.2016.05.014 ↗
6. F.D. Li, Z.Y. Liu, W.T. Wu, P. Xia, P.Y. Ying, Q. zhao, J.L. Li, S. Bai, and C.W. Ye, On the Role Of Texture In Governing Fatigue Crack Propagation Behavior of 2524 Aluminum Alloy, Mater. Sci. Eng., A, 2006, 669, p 367–37810.1016/j.msea.2016.05.091 ↗
7. R.K. Singh, A.K. Singh, and N.E. Prasad, Texture and Mechanical Property Anisotropy in an Al–Mg–Si–Cu Alloy, Mater. Sci. Eng., A, 2000, 277, p 114–12210.1016/S0921-5093(99)00549-3 ↗
8. M. Kuroda, Effects of Texture on Mechanical Properties of Aluminum Alloy sheets and Texture Optimization Strategy, in AIP Conference Proceedings (2005), pp. 445–450
9. H. Jin and D.J. Lloyd, Evolution of Texture in AA6111 Aluminum Alloy After Asymmetric Rolling with Various Velocity Ratios Between Top and Bottom Rolls, Mater. Sci. Eng., A, 2007, 465, p 267–27310.1016/j.msea.2007.02.128 ↗
10. X.Y. Wang, H.E. Hu, and J.C. Xia, Effect of Deformation Condition on Plastic Anisotropy of as-Rolled 7050 Aluminum Alloy Plate, Mater. Sci. Eng., A, 2009, 515, p 1–910.1016/j.msea.2009.03.061 ↗
11. X. Wang, M. Guo, Y. Zhang, H. Xing, Y. Li, J.R. Luo, J.S. Zhang, and L.Z. Zhuang, The Dependence Of Microstructure, Texture Evolution and Mechanical Properties of Al-Mg-Si-Cu Alloy Sheet on Final Cold Rolling Deformation, J. Alloys Compd., 2016, 657, p 906–91610.1016/j.jallcom.2015.10.070 ↗
12. O. Engler and J. Aegerter, Texture and Anisotropy in the Al-Mg Alloy AA 5005—part II, Correlation of Texture and Anisotropic Properties, Mater. Sci. Eng., A, 2014, 618, p 663–67110.1016/j.msea.2014.08.040 ↗
13. B.H. Cheon, H.W. Kim, and J.C. Lee, Asymmetric Rolling of Strip-Cast Al-5.5 Mg-0.3Cu Alloy Sheet Effects on the Formability and Mechanical Properties, Mater. Sci. Eng., A, 2011, 528, p 5223–522710.1016/j.msea.2011.03.021 ↗
14. X. Wang, M. Guo, A. Chapuis, J.R. Luo, J.S. Zhang, and L.Z. Zhuang, Effect of Solution Time on Microstructure, Texture and Mechanical Properties of Al-Mg-Si-Cu Alloys, Mater. Sci. Eng., A, 2015, 644, p 137–15110.1016/j.msea.2015.07.059 ↗
15. J. Li, W.C. Liu, H. Yuan, and Y.K. Gao, Comparison of Earing Behavior Between Continuous Cast and Direct Chill Cast AA 5182 Aluminum Alloys During Cold Rolling and Annealing, J. Mater. Process. Technol., 2010, 210, p 2007–201510.1016/j.jmatprotec.2010.07.017 ↗
16. L.H. Su, L. Cheng, A.A. Gazder, A.A. Saleh, G.Y. Deng, K. Tiet, and H.J. Li, Shear Texture Gradient in AA6061 Aluminum Alloy Processed by Accumulative Roll Bonding with High Roll Roughness, J. Alloys Compd., 2014, 594, p 12–2210.1016/j.jallcom.2014.01.125 ↗
17. J. Sidor, A. Miroux, R. Petrov, and L. Kestens, Microstructural and Crystallographic Aspects of Conventional and Asymmetric Rolling Processes, Acta Mater., 2008, 56, p 2495–250710.1016/j.actamat.2008.01.042 ↗
18. R. Higginson and P. Bate, Substructure Drag Effects and Recrystallization Textures in Aluminum, Acta Mater., 1999, 47, p 1079–109010.1016/S1359-6454(99)00012-9 ↗
19. H.E. Vatne, R. Shahani, and E. Nes, Deformation of Cube-Oriented Grains and Formation of Recrystallized Cube Grains in a Hot Deformed Commercial AlMgMn Aluminium Alloy, Acta Mater., 1996, 44, p 4447–446210.1016/1359-6454(96)00077-8 ↗
20. C.S.T. Chang and B.J. Duggan, Relationships Between Rolled Grain Shape, Deformation Bands, Microstructures and Recrystallization Textures in Al-5% Mg, Acta Mater., 2010, 58, p 476–48910.1016/j.actamat.2009.09.026 ↗
21. O. Engler, J. Hirsch, and K. Lücke, Texture Development in Al-1.8 wt% Cu Depending on the Precipitation State—II. Recrystallization Textures, Acta Mater., 1995, 43, p 121–138
22. H.E. Vatne, E. Nes, and O. Daaland, On the Formation of Cube Texture In Aluminium, Mater. Sci. Forum, 1994, 157, p 1087–109410.4028/www.scientific.net/MSF.157-162.1087 ↗
23. O. Dalland and E. Nes, Origin of Cube Texture During Hot Rolling Of Commercial Al-Mn-Mg Alloys, Acta Mater., 1996, 44, p 1389–141110.1016/1359-6454(95)00289-8 ↗
24. O. Sukhopar, C. Schã¤Fer, and G. Gottstein, Nucleation at Cube Bands During Recrystallisation in Commercial Al Alloy, Adv. Mater. Res., 2010, 89, p 533–53810.4028/www.scientific.net/AMR.89-91.533 ↗
25. J. Hjelen, R. Ørsund, and E. Nes, On the Origin Of Recrystallization Textures in Aluminium, Acta Mater., 1960, 39, p 1377–140410.1016/0956-7151(91)90225-P ↗
26. W.C. Liu and J.G. Morris, Effect of Hot and Cold Deformation on the P {011} <455> Recrystallization Texture in a Continuous Cast Al-Mn-Mg Aluminum Alloy, Scr. Mater., 2006, 54, p 2095–209910.1016/j.scriptamat.2006.03.004 ↗
27. J.F.W. Bishop and R. Hill, CXXVIII. A Theoretical Derivation of the Plastic Properties of a Polycrystalline Face-Centred Metal, Philos. Mag., 1951, 42, p 1298–130710.1080/14786444108561385 ↗
28. P. Lequeu, P. Gilormini, F. Montheillet, B. Bacroix, and J.J. Jonas, Yield Surfaces for Textured Polycrystals—I, Crystallogr Approach Acta Mater., 1987, 35, p 439–451
29. O. Engler, J. Hirsch, and K. Lücke, Texture Development in Al 1.8 wt% Cu Depending on the Precipitation State—I. Rolling Textures, Acta Mater., 1989, 37, p 2743–275310.1016/0001-6160(89)90308-8 ↗
30. K.V. Jata, S. Panchanadeeswaran, and A.K. Vasudevan, Evolution of Texture, Micro Structure and Mechanical Property Anisotropy in an Al-Li-Cu Alloy, Mater. Sci. Eng., A, 1998, 257, p 37–4610.1016/S0921-5093(98)00822-3 ↗
31. Y.C. Huang, Y. Liu, Q. Li, and C.G. Yang, Relevance Between Microstructure and Texture During Cold Rolling of AA3104 Aluminum Alloy, J. Alloys Compd., 2016, 673, p 383–38910.1016/j.jallcom.2016.02.226 ↗
32. G. Von Varga and G. Wassermann, On the Relation Between the Crystal Orientation in Rolled Aluminum Sheet and the Thickness of the Sheet, Metallwirtschqft, 1933, 12, p 511
33. I.L. Dillamore and W.T. Roberts, Crystallographic Texture Variations Through Rolled Aluminium and Copper Sheet, J. Inst. Met., 1963–1964, 92, p 193
34. W. Truszkowski, J. Krol, and B. Major, On penetration of Shear Texture into the Rolled Aluminum and Copper, Metall. Mater. Trans. A, 1982, 13, p 665–66910.1007/BF02644432 ↗
35. W.F. Smith and J. Hashemi, Foundation of Materials Science and Engineering, China Machine Press, Beijing, 2014
36. J. Hirsch and K. Lücke, Overview no. 76 Mechanism of Deformation and Development of Rolling Textures in Polycrystalline f.c.c. metals—II. Simulation and Interpretation of Experiments on the Basis of Taylor-Type Theories, Acta Mater., 1988, 36, p 2883–290410.1016/0001-6160(88)90173-3 ↗
37. U.F. Kocks and H. Chandra, Slip Geometry in Partially Constrained Deformation, Acta Mater., 1982, 30, p 695–70910.1016/0001-6160(82)90119-5 ↗
38. A. Skalli, A Theoretical and Experimental Study of the Plastic Deformation of f.c.c. Crystals in Plane Strain Compression, Philos. Mag., 1984, A49, p 505–524
39. J.F.W. Bishop and R. Hill, XLVI. A Theory of the Plastic Distortion of a Polycrystalline Aggregate Under Combined Stresses, Philos. Mag., 1951, 42, p 414–42710.1080/14786445108561065 ↗
40. F. Basson and J.H. Driver, Deformation Banding Mechanisms During Plane Strain Compression of Cube-Oriented f.c.c. Crystals, Acta Mater., 2000, 48, p 2101–211510.1016/S1359-6454(00)00042-2 ↗
41. Q. Liu, J. Wert, and N. Hansen, Location-Dependent Lattice Rotation and Shear Strain in Rolled Aluminium Single Crystals of Cube and Goss Orientations, Acta Mater., 2000, 48, p 4267–427910.1016/S1359-6454(00)00213-5 ↗
42. Q. Liu and N. Hansen, Macroscopic and Microscopic Subdivison of a Cold-Rolled Aluminium Single Crystal of Cubic Orientation, Proc. R. Soc. A, 1998, 454, p 2555–259210.1098/rspa.1998.0271 ↗
43. Q. Liu and N. Hansen, Deformation Microstructure and Orientation of f.c.c. Crystals, Phys. Status Solidi, 1995, 149, p 187–19910.1002/pssa.2211490113 ↗
44. B. Bacroix and J.J. Jonas, The influence of Non-octahedral Slip on Texture Development in FCC Metals, Textures Microstruct., 1988, 8, p 26710.1155/TSM.8-9.267 ↗
45. S.V. Divinskii and V.N. Dnieprenko, The Mechanism of Influence of Non-octahedral Slip on Rolling Texture Development in FCC Metals, Comput. Simul. Textures Microstruct., 1993, 21, p 251–25910.1155/TSM.21.251 ↗
46. F. Perocheau and J.H. Driver, Slip System Rheology of Al-1% Mn Crystals Deformed by Hot Plane Strain Compression, Int. J. Plast, 2002, 18, p 185–20210.1016/S0749-6419(00)00075-9 ↗
47. C. Maurice and J.H. Driver, High Temperature Plane Strain Compression of Cube Oriented Aluminium Crystals, Acta Mater., 1993, 41, p 1653–166410.1016/0956-7151(93)90185-U ↗
48. I.L. Dillamore and W.T. Roberts, Rolling Textures in f.c.c. and b.c.c. Metals, Acta Mater., 1964, 12, p 281–29310.1016/0001-6160(64)90204-4 ↗
49. U.F. Kocks, The Relation Between Polycrystal Deformation and Single-Crystal Deformation, Metall. Mater. Trans. B, 1970, 1, p 1121–114310.1007/BF02900224 ↗
50. D. Raabe, Z. Zhao, S.J. Park, and F. Roters, Theory of Orientation Gradients in Plastically Strained Crystals, Acta Mater., 2002, 50, p 421–44010.1016/S1359-6454(01)00323-8 ↗
51. D. Raabe, Texture Simulation for Hot Rolling of Aluminium by use of a Taylor Model Considering Grain Interactions, Acta Mater., 1995, 43, p 1023–102810.1016/0956-7151(94)00302-X ↗
52. H.P. Van, L. Delannay, and S.R. Kalidindi, Comparison of Two Grain Interaction Models for Polycrystal Plasticity and Deformation Texture Prediction, Int. J. Plast, 2002, 18, p 359–37710.1016/S0749-6419(00)00102-9 ↗
53. L. Delannay, S.R. Kalidindi, and P.V. Houtte, Quantitative Prediction of Textures in Aluminium Cold Rolled to Moderate Strains, Mater. Sci. Eng., A, 2002, 336, p 233–24410.1016/S0921-5093(01)01966-9 ↗
54. O. Engler, M. Crumbach, and S. Li, Alloy-Dependent Rolling Texture Simulation of Aluminium Alloys with a Grain-Interaction Model, Acta Mater., 2005, 53, p 2241–225710.1016/j.actamat.2005.01.032 ↗
55. P.V. Houtte, S. Li, M. Seefeldt, and L. Delannay, Deformation Texture Prediction from the Taylor Model to the Advanced Lamel Model, Int. J. Plast, 2005, 21, p 589–62410.1016/j.ijplas.2004.04.011 ↗
56. S.G. Chowdhury, Development of Texture During Cold Rolling in AA5182 Alloy, Scr. Mater., 2005, 52, p 99–10510.1016/j.scriptamat.2004.09.020 ↗
57. A. Oscarsson, W.B. Hutchinson, and H.E. Ekström, Influence of Initial Microstructure on Texture and Earing in Aluminium Sheet After Cold Rolling and Annealing, Mater. Sci. Technol., 1991, 7, p 554–56410.1179/mst.1991.7.6.554 ↗
58. A. Duckham, R.D. Knutsen, and O. Engler, Influence of Deformation Variables on the Formation of Copper-Type SHEAR Bands in Al-1Mg, Acta Mater., 2001, 49, p 2739–274910.1016/S1359-6454(01)00166-5 ↗
59. X.W. Kong, O. Engler, and K. Lücke, Influence of Precipitates on the Rolling Texture Development in (011)[100] Oriented Al-Cu and Al-Mn Single Crystals, Texture Microstruct., 1991, 14, p 1215–122010.1155/TSM.14-18.1215 ↗
60. W.C. Liu and J.G. Morris, Comparison of the Texture Evolution in Cold Rolled DC and SC AA 5182 Aluminum Alloys, Mater. Sci. Eng., A, 2003, 339, p 183–19310.1016/S0921-5093(02)00160-0 ↗
61. W.C. Liu and J.G. Morris, Texture Evolution of Polycrystalline AA 5182 Aluminum Alloy with an Initial {001} <110> Texture During Rolling, Scr. Mater., 2002, 47, p 487–49210.1016/S1359-6462(02)00184-7 ↗
62. W.C. Liu and J.G. Morris, Lattice Rotation and Stability of 22.5° ND Rotated Cube Orientation in Cold Rolled Polycrystalline AA 5182 Aluminum Alloy, Mater. Sci. Eng., A, 2004, 380, p 147–15410.1016/j.msea.2004.03.085 ↗
63. W.C. Liu, T. Zhai, C.S. Man, B. Radhakrishnan, and J.G. Morris, Effect of Initial Texture on Texture Evolution in Cold-Rolled AA 5182 Aluminum Alloy, Philos. Mag., 2004, 84, p 3305–332110.1080/14786430412331283082 ↗
64. W.C. Liu, T. Zhai, and J.G. Morris, Texture Evolution of Continuous Cast and Direct Chill Cast AA 3003 Aluminum Alloys During Cold Rolling, Scr. Mater., 2004, 51, p 83–8810.1016/j.scriptamat.2004.04.006 ↗
65. A. Akef and J.H. Driver, Orientation Splitting of Cube-Oriented Face-Centred Cubic Crystals in Plane Strain Compression, Mater. Sci. Eng., A, 1991, 132, p 245–25510.1016/0921-5093(91)90381-V ↗
66. A. Godfrey, D.J. Jensen, and N. Hansen, Slip Pattern, Microstructure and Local Crystallography in an Aluminium Single Crystal of Copper Orientation {112} <111>, Acta Mater., 1998, 46, p 835–84810.1016/S1359-6454(97)00316-9 ↗
67. G.L. Wu, A. Godfrey, W. Liu, and Q. Liu, Macroscopic Subdivision of Columnar Grain Aluminium with {001} Orientations Following Low Strain, Scr. Mater., 2001, 45, p 1117–112210.1016/S1359-6462(01)01091-0 ↗
68. R. Becker, J.F. Butler, H. Hu, and L.A. Lalli, Analysis of an Aluminum Single Crystal with Unstable Initial Orientation (001) [110] in Channel Die Compression, Metall. Mater. Trans. A, 1991, 22, p 45–5810.1007/BF03350948 ↗
69. Z.J. Li, A. Godfrey, and Q. Liu, Macroscopic Sub-Division of Rolled Al-1% Mn Single Crystals of 001 Orientation, Scr. Mater., 2001, 45, p 847–85210.1016/S1359-6462(01)01104-6 ↗
70. K. Morii, H. Mecking, and Y. Nakayama, Development of Shear Bands in f.c.c. Single Crystals, Acta Mater., 1985, 33, p 379–38610.1016/0001-6160(85)90080-X ↗
71. D. Raabe, Z. Zhao, and F. Roters, Study on the Orientational Stability of Cube-Oriented FCC Crystals Under Plane Strain by Use of a Texture Component Crystal Plasticity Finite Element Method, Scr. Mater., 2004, 50, p 1085–109010.1016/j.scriptamat.2003.11.061 ↗
72. J. Liu and J.G. Morris, Macro-, Micro- and Mesotexture Evolutions of Continuous Cast and Direct Chill Cast AA 3105 Aluminum Alloy During Cold Rolling, Mater. Sci. Eng., A, 2003, 357, p 277–29610.1016/S0921-5093(03)00210-7 ↗
73. S.C. Chang, D.H. Hou, and Y.K. Chang, The effect of Textures and Grain Shape on the Shear Band Formation in Rolled F.C.C. Metals, Acta Mater., 1989, 37, p 2031–203310.1016/0001-6160(89)90087-4 ↗
74. S.C. Chang, Q.D. Jiang, J.R. Hu, and F.R. Chen, The Texture and Formation of Shear Bands in a Hot Rolled 7050 Aluminum Alloy, Scr. Mater., 1998, 39, p 583–58810.1016/S1359-6462(98)00200-0 ↗
75. Z. Yao, G. Huang, A. Godfrey, W. Liu, and Q. Liu, Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy, Metall. Mater. Trans. A, 2009, 40, p 1487–149710.1007/s11661-008-9777-x ↗
76. Y.M. Zhao, W.C. Liu, and J.G. Morris, Comparison of Texture Evolution During Cold Rolling Between Direct Chill and Continuous Cast Aluminium Alloy 5052, Mater. Sci. Technol., 2003, 19, p 1379–138510.1179/026708303225008004 ↗
77. S.H. Choi, J.K. Choi, H.W. Kim, and S.B. Kang, Effect of Reduction Ratio on Annealing Texture and r-Value Directionality for a Cold-Rolled Al-5% Mg Alloy, Mater. Sci. Eng., A, 2009, 519, p 77–8710.1016/j.msea.2009.05.063 ↗
78. W.C. Liu, C.S. Man, and D. Raabe, Effect of Strain Hardening on Texture Development in Cold Rolled Al-Mg Alloy, Mater. Sci. Eng., A, 2010, 527, p 1249–125410.1016/j.msea.2009.09.059 ↗
79. H. Honneff and H. Mecking, A method for the Determination of the Active Slip Systems And Orientation Changes During Single Crystal Deformation, Textures of Materials, 1978, 1, p 26510.1007/978-3-642-81313-9_24 ↗
80. J. Hirsch and K. Lücke, Overview no. 76: Mechanism of Deformation and Development of Rolling Textures in Polycrystalline f.c.c. metals—I. Description of Rolling Texture Development in Homogeneous CuZn Alloys, Acta Mater., 1988, 36, p 2863–288210.1016/0001-6160(88)90172-1 ↗
81. J. Liu and J.G. Morris, Texture and Grain-Boundary Evolutions of Continuous Cast and Direct Chill Cast AA 5052 Aluminum Alloy During Cold Rolling, Metall, Mater. Trans. A, 2003, 34, p 951–96610.1007/s11661-003-0225-7 ↗
82. A.K. Vasudévan, M.A. Przystupa, and W.G. Fricke, Effect of Composition on Crystallographic Texture in Hot-Rolled Al-Li-Cu Alloys, Mater. Sci. Eng., A, 1995, 196, p 1–810.1016/0921-5093(94)09704-6 ↗
83. W.C. Liu and J.G. Morris, Effect of Hot and Cold Deformation on the β Fiber Rolling Texture in Continuous Cast AA 5052 Aluminum Alloy, Scr. Mater., 2005, 53, p 1273–127710.1016/j.scriptamat.2005.07.040 ↗
84. H. Weiland and J.R. Hirsch, Microstructure and Local Texture in Hot Rolled Aluminum, Textures Microstruct., 1991, 14, p 647–65210.1155/TSM.14-18.647 ↗
85. D. Caillard and J.L. Martin, Glide of Dislocations in Non-octahedral Planes of FCC metals: A Review, Int. J. Mat. Res., 2009, 100, p 1403–141010.3139/146.110190 ↗
86. C. Maurice and J.H. Driver, Hot Rolling Textures of f.c.c. Metals—Part I. Experimental Results on Al Single and Polycrystals, Acta Mater., 1997, 45, p 4627–463810.1016/S1359-6454(97)00115-8 ↗
87. C. Maurice and J.H. Driver, Hot Rolling Textures of f.c.c. Metals—Part II. Numerical Simulations, Acta Mater., 1997, 45, p 4639–464910.1016/S1359-6454(97)00117-1 ↗
88. M. Crumbach and G. Gottstein, Analysis of the Activity of 110 <110> Slip in AA3103 by Inverse Modeling, Mater. Sci. Eng., 2004, A387–389, p 282–28710.1016/j.msea.2004.01.130 ↗
89. Q. Zhao, Z.Y. Liu, S.S. Li, T.T. Huang, P. Xia, and L.Q. Lu, Evolution of the Brass Texture in an Al-Cu-Mg Alloy During Hot Rolling, J. Alloys Compd., 2016, 691, p 786–79910.1016/j.jallcom.2016.08.322 ↗
90. Q. Contrepois, C. Maurice, and J.H. Driver, Hot Rolling Textures of Al-Cu-Li and Al-Zn-Mg-Cu Aeronautical Alloys: Experiments and Simulations to High Strains, Mater. Sci. Eng., A, 2010, 527, p 7305–731210.1016/j.msea.2010.07.095 ↗
91. P.S. Bate, Y. Huang, and F.J. Humphreys, Development of the “Brass” Texture Component During the Hot Deformation of Al-6 Cu-0.4 Zr, Acta Mater., 2004, 52, p 4281–428910.1016/j.actamat.2004.05.044 ↗
92. B. Bacroix, O. Brun, and T. Chauveau, The Influence of Temperature on the Rolling Textures of Al Alloys in the Absence of Recrystallization, Textures Microstruct., 1991, 14, p 787–79210.1155/TSM.14-18.787 ↗
93. T.C. Schulthess, P.E.A. Turchi, A. Gonis, and T.G. Nieh, Systematic Study of Stacking Fault Energies of Random Al-Based Alloys, Acta Mater., 1998, 46, p 2215–222110.1016/S1359-6454(97)00432-1 ↗
94. W. Truszkowski, J. Kr’Ol, and B. Major, Inhomogeneity of Rolling Texture in fcc Metals, Metall. Mater. Trans. A, 1980, 11, p 749–75810.1007/BF02661204 ↗
95. W.C. Liu, C.S. Man, and J.G. Morris, Lattice Rotation of the Cube Orientation to the β Fiber During Cold Rolling of AA 5052 Aluminum Alloy, Scr. Mater., 2001, 45, p 807–81410.1016/S1359-6462(01)01074-0 ↗
96. A.W. Bowen, Texture Development in High Strength Aluminium Alloys, Mater. Sci. Technol., 1990, 6, p 1058–107110.1179/mst.1990.6.11.1058 ↗
97. W.C. Liu and J.G. Morris, Quantitative Analysis of Texture Evolution in Cold-Rolled, Continuous-Cast AA 5xxx-Series Aluminum Alloys, Metall. Mater. Trans. A, 2004, 35, p 265–27710.1007/s11661-004-0127-3 ↗
98. O. Engler and K. Lücke, Influence of the Precipitation State on the Cold Rolling Texture in 8090 Al-Li Material, Mater. Sci. Eng., A, 1991, 148, p 15–2310.1016/0921-5093(91)90861-G ↗
99. T. Rickert, S. Guldberg, T. Furu, E. Nes, and K. Lücke, The Effect of Particles on Texture Evolution in Commercial AlMn, Textures Microstruct., 1991, 14, p 721–72610.1155/TSM.14-18.721 ↗
100. Z.Y. Yao, Z.Q. Zhang, A. Godfrey, W. Liu, and Q. Liu, Microstructure and Texture Evolution of Particle-Containing AA3104 Alloy Cold Rolled to Large Strains, Mater. Sci. Technol., 2010, 26, p 539–54610.1179/026708309X12459430509210 ↗