Development of a Cast Al-Mg2Si-Si In Situ Composite: Microstructure, Heat Treatment, and Mechanical Properties
Source abstract
Abstract
An Al-11Mg2Si-Si in situ composite was prepared by a modified investment casting technique that employs sub-pressure for castability improvement and immersion of ceramic shell molds in fluidized beds of silica sand and iron particles for heat extraction improvement. The microstructure of the as-cast composite is explained according to the pseudoeutectic Al-Mg2Si phase diagram. The positive effect of a decreased number of mold investment layers and cooling assisted by immersion of the mold in a metallic bed on the tensile strength and hardness of the heat treated composite is noted. A minor presence of Fe in the master alloys constitutes an essential factor for the brittleness of the composite. Solution treatment notably improves the tensile strength of the composite; however, prolonged treatment deteriorates its ductility. The effect of time and temperature of the aging treatment on the hardness of the composite is investigated. The positive influence of cooling assisted by a metallic fluidized bed on the effectiveness of the aging treatment is noticed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. D.J. Lloyd, Particle Reinforced Aluminium and Magnesium Matrix Composites, Int. Mater. Rev., 1994, 39, p 1–2310.1179/095066094790150982 ↗
2. P.K. Rohatgi, R. Asthana, and S. Das, Solidification Structures and Properties of Cast Metal-Ceramic Particle Composites, Int. Mater. Rev., 1986, 31, p 115–13910.1179/095066086790324267 ↗
3. A. Mortensen and I. Jin, Solidification Processing of Metal Matrix Composites, Int. Mater. Rev., 1992, 37, p 101–12810.1179/imr.1992.37.1.101 ↗
4. R. Asthana and S.N. Tewari, Interfacial and Capillary Phenomena in Solidification Processing of Metal-Matrix Composites, Compos. Manuf., 1993, 4, p 3–2510.1016/0956-7143(93)90012-W ↗
5. R. Asthana, Reinforced Cast Metals. Part I: Solidification Microstructure, J. Mater. Sci., 1998, 33, p 1679–169810.1023/A:1004308027679 ↗
6. The Aluminum Association Ιnc, Aluminum Alloy Selection and Applications, Washington, DC, 1998, p 1–24. ( http://www.calmaluminium.com.au/Documents/Aluminum-Alloys.pdf )
7. S. Hegde and K. Narayan Prabhu, Modification of Eutectic Silicon in Al-Si Alloys, J. Mater. Sci., 2008, 43, p 3009–302710.1007/s10853-008-2505-5 ↗
8. J.U. Ejiofor and R.G. Reddy, Developments in the Processing and Properties of Particulate Al-Si Composites, JOM, 1997, 11, p 31–3710.1007/s11837-997-0008-5 ↗
9. Y.G. Zhao, Q.D. Quin, Y.Q. Zhao, Y.H. Liang, and Q.C. Jiang, In Situ Mg2Si/Al-Si Composite Modified by K2TiF6, Mater. Lett., 2004, 58, p 2192–219410.1016/j.matlet.2004.01.016 ↗
10. J. Zhang, Z. Fan, Y.Q. Wang, and B.L. Zhou, Microstructural Evolution of the In Situ Al-15wt.%Mg2Si Composite with Extra Si Contents, Scripta Mater., 2000, 42, p 1101–110610.1016/S1359-6462(00)00338-9 ↗
11. J. Zhang, Z. Fan, Y.Q. Wang, and B.L. Zhou, Microstructural Refinement in Al-Mg2Si In Situ Composites, J. Mater. Sci. Lett., 1999, 18, p 783–78410.1023/A:1006684916145 ↗
12. J. Zhang, Z. Fan, Y.Q. Wang, and B.L. Zhou, Microstructural Development of Al-15wt.%Mg2Si In situ Composite with Mischmetal Addition, Mater. Sci. Eng., 2000, A281, p 104–11210.1016/S0921-5093(99)00732-7 ↗
13. Q.D. Quin, Y.G. Zhao, W. Zhou, and P.J. Cong, Effect of Phosphorus on Microstructure and Growth Manner of Primary Mg2Si Crystal in Mg2Si/Al Composite, Mater. Sci. Eng., 2007, A447, p 186–19110.1016/j.msea.2006.10.076 ↗
14. C. Li, Y.Y. Wu, H. Li, and X.F. Liu, Morphological Evolution and Growth Mechanism of Primary Mg2Si Phase in Al-Mg2Si Alloys, Acta Mater., 2011, 59, p 1058–106710.1016/j.actamat.2010.10.036 ↗
15. R. Khorshidi, A. Honarbakhsh Raouf, M. Emamy, and J. Campbell, The Study of Li Effect on the Microstructure and Tensile Properties of Cast Al-Mg2Si Metal Matrix Composite, J. Alloys Compd., 2011, 509, p 9026–903310.1016/j.jallcom.2011.07.012 ↗
16. J. Hou, C. Li, and X. Liu, Nucleating Role of an Effective In Situ Mg3P2 on Mg2Si in Mg-Al-Si Alloys, J. Alloys Compd., 2011, 509, p 735–73910.1016/j.jallcom.2010.09.039 ↗
17. C. Li, X. Liu, and Y. Wu, Refinement and Modification Performance of Al-P Master Alloy on Primary Mg2Si in Al-Mg-Si Alloys, J. Alloy. Compd., 2008, 465, p 145–15010.1016/j.jallcom.2007.10.111 ↗
18. C. Li, X. Liua, and G. Zhang, Heterogeneous Nucleating Role of TiB2 or AlP/TiB2 Coupled Compounds on Primary Mg2Si in Al-Mg-Si Alloys, Mater. Sci. Eng., A, 2008, 497, p 432–43710.1016/j.msea.2008.07.034 ↗
19. M.H. Jacobs, Precipitation Hardening, TALAT Lecture 1204, EAA—European Aluminium Association, 1999. http://core.materials.ac.uk/repository/eaa/talat/1204.pdf
20. H. Liao, Yu Sun, and G. Sun, Restraining Effect of Strontium on the Crystallization of Mg2Si Phase during Solidification in Al-Si-Mg Casting Alloys and Mechanisms, Mater. Sci. Eng., 2003, A358, p 164–170
21. P.L. Schaffer, L. Arnberg, and A.K. Dahle, Segregation of Particles and its Influence on the Morphology of the Eutectic Silicon Phase in Al-7 wt% Si Alloys, Scripta Mater., 2006, 54, p 677–68210.1016/j.scriptamat.2005.10.016 ↗
22. M.A. Moustafa, C. Lepage, F.H. Samuel, and H.W. Doty, Metallographic Observations on Phase Precipitation in Strontium-Modified Al-11.7% Si Alloys: Role of Alloying Elements, Int. J. Cast Met. Res., 2003, 15, p 609–62610.1080/13640461.2003.11819547 ↗
23. M.V. Kral, P.N.H. Nakashima, and D.R.G. Mitchell, Electron Microscope Studies of Al-Fe-Si Intermetallics in an Al-11 Pct Si Alloy, Metall. Mater. Trans., 2006, 37A, p 1987–199710.1007/s11661-006-0141-8 ↗
24. S.G. Shabestari, The Effect of Iron and Manganese on the Formation of Intermetallic Compounds in Aluminum-Silicon Alloys, Mater. Sci. Eng., 2004, 383, p 289–29810.1016/j.msea.2004.06.022 ↗
25. X. Cao and J. Campbell, The Solidification Characteristics of Fe-Rich Intermetallics in Al-11.5Si-0.4Mg Cast Alloys, Metall. Mater. Trans., 2004, 35A, p 1425–143510.1007/s11661-004-0251-0 ↗
26. C.M. Dinnis, J.A. Taylor, and A.K. Dahle, As-Cast Morphology of Iron-Intermetallics in Al-Si Foundry Alloys, Scripta Mater., 2005, 53, p 955–95810.1016/j.scriptamat.2005.06.028 ↗
27. G. Mrówka-Nowotnik, J. Sieniawski, and M. Wierzbińska, Intermetallic Phase Particles in 6082 Aluminium Alloy, Arch. Mater. Sci. Eng., 2007, 28(2), p 69–76
28. A.E. Karantzalis, A. Lekatou, E. Georgatis, V. Poulas, and H. Mavros, Microstructural Observations in a Cast Al-Si-Cu/TiC Composite, J. Mater. Eng. Perform., 2010, 19, p 585–59010.1007/s11665-009-9505-8 ↗
29. M. Hosseinifar and D.V. Malakhov, The Sequence of Intermetallics Formation during the Solidification of an Al-Mg-Si Alloy Containing La, Metall. Mater. Trans., 2011, 42A, p 825–83310.1007/s11661-010-0453-6 ↗
30. A.L. Kearney, Properties of Cast Aluminum Alloys, ASM Handbook, Properties and Selection: Nonferrous Alloys and Special Purpose Materials, Vol 2, 10th ed., J.R. Davis, Ed., ASM International, Materials Park, OH, 1998, p 152–177 (5th print)
31. C.S. Lim, A.J. Clegg, and N.L. Loh, The Reduction of Dendrite ARM Spacing Using a Novel Pressure-Assisted Investment Casting Approach, J. Mater. Process. Technol., 1997, 70(1–3), p 99–10210.1016/S0924-0136(97)00044-7 ↗
32. A.L. Kearney, Aluminum Foundry Products, ASM Handbook, Properties and Selection: Nonferrous Alloys and Special Purpose Materials, Vol 2, 10th ed., J.R. Davis, Ed., ASM International, Materials Park, OH, 1998, p 152–177 (5th print)
33. Y.M. Li and R.D. Li, The Segregation of Copper and Silicon in Al-Si-Cu Alloy during Electromagnetic Centrifugal Solidification, Sci. Technol. Adv. Mater., 2001, 2, p 277–28010.1016/S1468-6996(01)00069-9 ↗
34. D.G. Altenpohl, Aluminum: Technology, Applications, and Environment, 6th ed., The Aluminum Association Ιnc. and The Minerals, Metals Materials Society Pennsylvania, Washington, DC, 1998
35. S. Brusethaug and Y. Langsrud, Aluminum Properties, a Model for Calculating Mechanical Properties in AlSiMgFe-Foundry Alloys, Metall. Sci. Technol., 2000, 18(1), p 3–7
36. Y.L. Liu, S.B. Kang, and H.W. Kim, The Complex Microstructures in an As-Cast Al-Mg-Si Alloy, Mater. Lett., 1999, 41, p 267–27210.1016/S0167-577X(99)00141-X ↗
37. L.F. Mondolfo, Aluminum Alloys: Structure and Properties, Butterworths and Co. Ltd., London, 1976
38. X. Cao and J. Campbell, The Nucleation of Fe-Rich Phases on Oxide Films in Al-11.5Si-0.4Mg Cast Alloys, Metall. Mater. Trans., 2003, 34A, p 1409–142010.1007/s11661-003-0253-3 ↗
39. M.H. Mulazimoglu, A. Zaluska, F. Paray, and J.E. Gruzleski, The Effect of Strontium on the Mg2Si Precipitation Process in 6201 Aluminum Alloy, Metall. Mater. Trans., 1997, 28A, p 1289–129510.1007/s11661-997-0265-5 ↗
40. M.H. Mulazimoglu, A. Zaluska, J.E. Gruzleski, and F. Paray, Electron Microscope Study of Al-Fe-Si Intermetallics in 6201 Aluminum Alloy, Metall. Mater. Trans., 1996, 27A, p 929–93610.1007/BF02649760 ↗
41. J. Pedersen and L. Arnberg, The Effect of Solution Heat Treatment and Quenching Rates on Mechanical Properties in AlSiMg Foundry Alloys, Metall. Mater. Trans., 2001, 32A, p 525–53210.1007/s11661-001-0069-y ↗
42. D.L. Zhang and L. Zheng, The Quench Sensitivity of Cast Al-7 wt pct Si-0.4 wt pct Mg Alloy, Metall. Mater. Trans., 1996, 27A, p 3983–399110.1007/BF02595647 ↗
43. M.J. Mageto, TEM Study of Microstructure in relation to Hardness and Ductility in Al-Mg-Si (6xxx) Alloys, MSc Thesis, Norwegian University of Science and Technology (NTNU), Trondheim Norway (2003)