A Study of the Tensile Deformation and Fracture Behavior of Commercially Pure Titanium and Titanium Alloy: Influence of Orientation and Microstructure
Source abstract
Abstract
In this paper, the tensile deformation and fracture behavior of commercially pure titanium and the titanium alloy (Ti-6Al-4V) are presented and briefly discussed. Samples of both commercially pure titanium and the Ti-6Al-4V alloy were prepared from the as-provided plate stock along both the longitudinal and transverse orientations. The specimens were then deformed to failure in uniaxial tension. The intrinsic influence of material composition and test specimen orientation on microstructure, tensile properties, and resultant fracture behavior of the two materials is presented. The conjoint influence of intrinsic microstructural features, nature of loading, and specimen orientation on tensile properties of commercially pure titanium and the Ti-6Al-4V alloy is highlighted. The fracture behavior of the two materials is discussed taking into consideration the nature of loading, specimen orientation, and the role and contribution of intrinsic microstructural effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. ASM Metals Handbook, Vol 2, 10th edn., Materials Park, OH, 1990, p 586–591
2. M.J. Donachie, Jr., Titanium—A Technical Guide, 2nd edn., American Society for Materials International, Materials Park, OH, 2000, p 1–310.31399/asm.tb.ttg2.9781627082693 ↗
3. F.H. Froes, Titanium, Encyclopedia of Materials Science and Engineering, P. Bridenbaugh, Ed., Elsevier, Oxford, 2000
4. F.H. Froes, Titanium Metal Alloys, Handbook of Chemical Industry Economics, J. Ellis, Ed., Wiley, New York, 2000
5. New Horizons for Aerospace, R&D Magazine, January 1996, p 28–30
6. D.R. Askeland, The Science and Engineering of Materials, 2nd edn., Thompson Canada Limited, Toronto, Canada, 2007, p 443
7. M. Peters, J. Kumpfert, C. Ward, and C. Leyens, Titanium Alloys for Aerospace Applications, Adv. Eng. Mater., 2003, 5(66), p 419–42710.1002/adem.200310095 ↗
8. R.R. Boyer, An Overview on the Use of Titanium in the Aerospace Industry, Mater. Sci. Eng., 1996, A213, p 103–11410.1016/0921-5093(96)10233-1 ↗
9. J.K. Wessel, Ed., The Handbook of Advanced Materials, Oak Ridge, Tennessee, 2004, p 272–319
10. Titanium Alloys Developments, An Overview of Technical Presentations of the 21st Annual ITA Conference, Scottsdale, Arizona, Adv. Mater. Processes, 2006
11. V.N. Moiseyev, Titanium Alloys: Russian Aircraft and Aerospace Application, Taylor & Francis, 200610.1201/9781420037678 ↗
12. D.H. Kohn and P. Ducheyne, Tensile and Fatigue Strength of Hydrogen-Treated Ti-6Al-4V Alloy, J. Mater. Sci., 1991, 26(2), p 328–33410.1007/BF00576523 ↗
13. Y.T. Lee, M. Peters, and G. Welsch, Elastic Moduli and Tensile and Physical Properties of Heat-Treated and Quenched Powder Metallurgical Ti-6Al-4V Alloy, Metall. Trans. A, 1991, 22(3), p 709–71410.1007/BF02670293 ↗
14. D. Makel and D. Eylon, The Effect of Microstructure on Localized Melting at Separation in Ti-6Al-4V Tensile Samples, Metall. Trans. A, 1990, 21(12), p 3127–313610.1007/BF02647309 ↗
15. W.R. Kerr, The Effect of Hydrogen as a Temporary Alloying Element on the Microstructure and Tensile Properties of Ti-6Al-4V, Metall. Trans. A, 1985, 16(6), p 1077–108710.1007/BF02811677 ↗
16. C.G. Rhodes and N.E. Paton, The Influence of Î ± /Î2 Interface Phase on Tensile Properties of Ti-6Al-4V, Metall. Trans. A, 1979, 10(11), p 1753–175810.1007/BF02811711 ↗
17. A. Arieli and A. Rosen, Superplastic Deformation of Ti-6Al-4V Alloy, Metall. Trans. A, 1977, 8(10), p 1591–159610.1007/BF02644864 ↗
18. M. Peter, A. Gysler, and G. Lutjering, Influence of Texture on Fatigue Properties of Ti-6Al-4V, Metall. Trans., 1984, 15A, p 597–605
19. T.S. Srivatsan and Mithun Kuruvilla, Microstructure, Hardness, Tensile Deformation, Cyclic Fatigue and Fracture Behavior of Ti-Al-V-Fe-O Alloy: Role of Sheet Stock, Final Technical Report, ATI Wah Chang, March 2007
20. C. Bathias, K. El Alami, and T.Y. Wu, Influence of Mean Stress on Ti-6Al-4V Fatigue Crack Growth at Very High Frequency, Eng. Fract. Mech., 1997, 56(2), p 255–26410.1016/0013-7944(95)00256-1 ↗