Modification of Rule of Mixtures for Estimation of the Mechanical Properties of Dual-Phase Steels
Source abstract
Abstract
The mechanical properties of dual-phase (DP) steels were correlated with the amount of martensite and its carbon content. The application of rule of mixtures for predicting the mechanical properties was critically discussed. Subsequently, a modified rule of mixtures was developed to estimate the mechanical properties of DP steels, which accounts for the variation of carbon content in martensite as a function of its volume fraction. The proposed model was able to predict the observed trends and values of hardness, yield stress, and tensile strength in a DP steel with ~0.1 wt.% C. Then, its applicability was also verified for a DP steel with ~0.2 wt.% C to cover the usual range of carbon content in DP steels. As a result, this simple and effective approach is anticipated to find application in estimating the properties of DP steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. C.C. Tasan, M. Diehl, D. Yan, M. Bechtold, F. Roters, L. Schemmann, C. Zheng, N. Peranio, D. Ponge, M. Koyama, K. Tsuzaki, and D. Raabe, An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design, Annu. Rev. Mater. Res., 2015, 45, p 19.1–19.4110.1146/annurev-matsci-070214-021103 ↗
2. D. Liu, F. Fazeli, and M. Militzer, Modeling of Microstructure Evolution During Hot Strip Rolling of Dual Phase Steels, ISIJ Int., 2007, 47, p 1789–179810.2355/isijinternational.47.1789 ↗
3. J.C. Zhang, H.S. Di, Y.G. Deng, S.C. Li, and R.D.K. Misra, Microstructure and mechanical Property Relationship in an Ultrahigh Strength 980 MPa Grade High-Al Low-Si Dual Phase, Mater. Sci. Eng., A, 2015, 645, p 232–24010.1016/j.msea.2015.08.016 ↗
4. M. Mazinani and W.J. Poole, Effect of Martensite Plasticity on the Deformation Behavior of a Low-Carbon Dual-Phase Steel, Metall. Mater. Trans. A, 2007, 38, p 328–33910.1007/s11661-006-9023-3 ↗
5. A. Bag and K.K. Ray, A New Model to Explain the Unusual Tensile Behavior of High Martensite Dual-Phase Steels, Metall. Mater. Trans. A, 2001, 32, p 2400–240310.1007/s11661-001-0215-6 ↗
6. M. Delince, Y. Brechet, J.D. Embury, M.G.D. Geers, P.J. Jacques, and T. Pardoen, Structure–Property Optimization of Ultrafine-Grained Dual-Phase Steels Using a Microstructure-Based Strain Hardening Model, Acta Mater., 2007, 55, p 2337–235010.1016/j.actamat.2006.11.029 ↗
7. A.P. Pierman, O. Bouaziz, T. Pardoen, P.J. Jacques, and L. Brassart, The Influence of Microstructure and Composition on the Plastic Behaviour of Dual-Phase Steels, Acta Mater., 2014, 73, p 298–31110.1016/j.actamat.2014.04.015 ↗
8. K. Yoshida, R. Brenner, B. Bacroix, and S. Bouvier, The Influence of Microstructure and Composition on the Plastic Behaviour of Dual-Phase Steels, Mater. Sci. Eng. A, 2011, 528, p 1037–104610.1016/j.msea.2010.10.078 ↗
9. J. Kadkhodapour, S. Schmauder, D. Raabe, S. Ziaei-Rad, U. Weber, and M. Calcagnotto, Experimental and Numerical Study on Geometrically Necessary Dislocations and Non-homogeneous Mechanical Properties of the Ferrite Phase in Dual Phase Steels, Acta Mater., 2011, 59, p 4387–439410.1016/j.actamat.2011.03.062 ↗
10. H.K.D.H. Bhadeshia and D.V. Edmonds, Analysis of the Mechanical Properties and Microstructure of a High-Silicon Dual-Phase Steel, Metal Science, 1980, 14, p 41–4910.1179/030634580790426328 ↗
11. A. Bahrami, S.H. Mousavi Anijdan, and A. Ekrami, Prediction of Mechanical Properties of DP Steels Using Neural Network Model, J. Alloys Compd., 2005, 392, p 177–18210.1016/j.jallcom.2004.09.014 ↗
12. T.S. Byun and I.S. Kim, Tensile Properties and Inhomogeneous Deformation of Ferrite-Martensite Dual-Phase Steels, J. Mater. Sci., 1993, 28, p 2923–293910.1007/BF00354695 ↗
13. R.G. Davies, Influence of Martensite Composition Content on the Properties of Dual Phase Steels, Metall. Trans. A, 1978, 9A, p 671–67910.1007/BF02659924 ↗
14. A.R. Marder, Deformation Characteristics of Dual-Phase Steels, Metall. Trans. A, 1982, 13A, p 85–9210.1007/BF02642418 ↗
15. K. Park, M. Nishiyama, N. Nakada, T. Tsuchiyama, and S. Takaki, Effect of the Martensite Distribution on the Strain Hardening and Ductile Fracture Behaviors in Dual-Phase Steel, Mater. Sci. Eng., A, 2014, 604, p 135–14110.1016/j.msea.2014.02.058 ↗
16. E. Fereiduni and S.S. Ghasemi Banadkouki, Reliability/Unreliability of Mixture Rule in a Low Alloy Ferrite–Martensite Dual Phase Steel, J. Alloy. Compd., 2013, 577, p 351–35910.1016/j.jallcom.2013.05.209 ↗
17. D.A. Korzekwa, R.D. Lawson, D.K. Matlock, and G. Krauss, A Consideration of Models Describing the Strength and Ductility of Dual-Phase Steels, Scr. Metall., 1980, 14, p 1023–102810.1016/0036-9748(80)90379-8 ↗
18. N. Fonstein, Dual-Phase Steels, Woodhead Publishing, In Automotive Steels, 2017, p 169–216
19. S. Sodjit and V. Uthaisangsuk, Microstructure Based Prediction of Strain Hardening Behavior of Dual Phase Steels, Mater. Des., 2012, 41, p 370–37910.1016/j.matdes.2012.05.010 ↗
20. A.A. Gorni, Steel Forming and Heat Treating Handbook. www.gorni.eng.br . 2012.
21. S. Deldar, H. Mirzadeh, and M.H. Parsa, Prevention of Surface Hot Shortness, Development of Banded Structure, and Mechanical Properties of Hot Rolled Cu-Bearing Steel, Eng. Fail. Anal., 2016, 68, p 132–13710.1016/j.engfailanal.2016.06.001 ↗
22. G. Azizi, H. Mirzadeh, and M.H. Parsa, The Effect of Primary Thermo-Mechanical Treatment on TRIP Steel Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2015, 639, p 402–40610.1016/j.msea.2015.05.045 ↗
23. M. Calcagnotto, D. Ponge, and D. Raabe, Effect of Grain Refinement to 1 µm on Strength and Toughness of Dual-Phase Steels, Mater. Sci. Eng. A, 2010, 527, p 7832–784010.1016/j.msea.2010.08.062 ↗
24. Y. Mazaheri, A. Kermanpur, and A. Najafizadeh, A Novel Route for Development of Ultrahigh Strength Dual Phase Steels, Mater. Sci. Eng. A, 2014, 619, p 1–1110.1016/j.msea.2014.09.058 ↗
25. G. Krauss, Steels Processing, Structure, and Performance, 2nd ed., ASM International, Russel, 201510.31399/asm.tb.spsp2.9781627082655 ↗
26. A. Bag, K.K. Ray, and E.S. Dwarakadasa, Influence of Martensite Content and Morphology on tensile and Impact Properties of High-Martensite Dual-Phase Steels, Metall. Mater. Trans. A, 1999, 30A, p 1193–120210.1007/s11661-999-0269-4 ↗
27. S. Saadatkia, H. Mirzadeh, and J.M. Cabrera, Hot Deformation Behavior, Dynamic Recrystallization, and Physically-Based Constitutive Modeling of Plain Carbon Steels, Mater. Sci. Eng., A, 2015, 636, p 196–20210.1016/j.msea.2015.03.104 ↗
28. H. Mirzadeh, J.M. Cabrera, J.M. Prado, and A. Najafizadeh, Hot Deformation Behavior of a Medium Carbon Microalloyed Steel, Mater. Sci. Eng. A, 2011, 528, p 3876–388210.1016/j.msea.2011.01.098 ↗
29. D. Das and P.P. Chattopadhyay, Influence of Martensite Morphology on the Work-Hardening Behavior of High Strength Ferrite–Martensite Dual-Phase Steel, J. Mater. Sci., 2009, 44, p 2957–296510.1007/s10853-009-3392-0 ↗
30. F.H. Samuel, Tensile Stress–Strain Analysis of Dual-Phase Structures in an Mn-Cr-Si steel, Mater. Sci. Eng., 1987, 92, p L1–L410.1016/0025-5416(87)90179-0 ↗
31. G. Krauss, Martensite in Steel: Strength and Structure, Mater. Sci. Eng. A, 1999, 273–275, p 40–5710.1016/S0921-5093(99)00288-9 ↗
32. P.K. Nag, K. Tripathi, and C.B. Pawar, Basic Mechanical Engineering, McGraw-Hill, New York, 2009
33. W.F. Hosford, Mechanical Behavior of Materials, 2nd ed., Cambridge University Press, Cambridge, 2010
34. H. Mirzadeh, A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress, Metall. Mater. Trans. A, 2015, 46, p 4027–403710.1007/s11661-015-3006-1 ↗
35. H. Mirzadeh and A. Najafizadeh, ANN Modeling of Strain-Induced Martensite and Its Applications in Metastable Austenitic Stainless Steels, J. Alloys Compd., 2009, 476, p 352–35510.1016/j.jallcom.2008.08.046 ↗
36. T. Mirzaie, H. Mirzadeh, and J.M. Cabrera, A simple Zerilli–Armstrong Constitutive Equation for Modeling and Prediction of Hot Deformation Flow Stress of Steels, Mech. Mater., 2016, 94, p 38–4510.1016/j.mechmat.2015.11.013 ↗
37. R. Kuziak, R. Kawalla, and S. Waengler, Advanced High Strength Steels for Automotive Industry, Arch. Civ. Mech. Eng., 2008, 8, p 103–11710.1016/S1644-9665(12)60197-6 ↗