The Effect of Coating Thickness on Corrosion Resistance of Hydroxyapatite Coated Ti6Al4V and 316L SS Implants
Source abstract
Abstract
Hydroxyapatite (HAP) has been coated onto Ti6Al4V and 316L SS substrates by sol-gel method. The coating thicknesses for the analysis were about 40 and 72 μm. Adhesion and corrosion tests have been conducted on uncoated and HAP-coated substrates. The coatings were characterized by XRD, SEM, and adhesion analysis. The corrosion resistance was examined in vitro by potentiodynamic polarization technique in Ringer’s solution at room temperature. Electrochemical analysis indicated that the highest corrosion susceptibility was found on 72-μm-coated 316L SS, and the 40-μm HAP-coated Ti6Al4V showed the highest corrosion resistance. It was observed that the coating thickness was an effective parameter on both adhesion and corrosion resistance. It was shown that adhesion and corrosion resistance decreased with increasing coating thickness on both substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. O.S. Yildirim, B. Aksakal, H. Celik, Y. Vangolu, and A. Okur, An Investigation of the Effects of Hydroxyapatite Coatings on the Fixation Strength of Cortical Screws, J. Med. Eng. Phys., 2005, 27(3), p 221–22810.1016/j.medengphy.2004.10.006 ↗
2. V. Pasekova, Z. Klezl, K. Balik, and M. Adam, Biomechanical and Biological Properties of the Implant Material Carbon-Carbon Composite Covered with Pyrolytic Carbon, J. Mater. Sci.: Mater. Med., 2000, 11, p 793–798
3. U.E. Pazzaglia, C. Minoia, G. Gueltieri, I. Gueltieri, C. Riccardi, and L. Ceccilliani, Metal Ions in Body Fluids After Arthroplasty, Acta Orthop. Scand., 1986, 57, p 415–41810.3109/17453678609014760 ↗
4. L.D. Dorr, R. Bloebaum, J. Emmanual, and R. Meldrum, Histologic, Biochemical and Ion Analysis of Tissue and Fluids Retrieved During Total Hip Arthroplasty, Clin. Orthop., 1990, 261, p 82–95
5. R.M. Urban, J.J. Jacobs, J.L. Gilbert, and J.Q. Galante, Migration of Corrosion Products from Modular Hip Prosthesis: Particle Microanalysis and Histopathological Findings, J. Bone Joint Surg., 1994, 76(A), p 1345–135910.2106/00004623-199409000-00009 ↗
6. J.B. Park and R.S. Lakes, Metallic Implant Materials in Biomaterials: An Introduction, Plenum press, NY, 1992, p 75–115
7. M. Cabrini, A. Cigada, G. Rondelli, and B. Vicentini, Effect of Different Surface Finishing and Hydroxyapatite Coatings on Passive and Corrosion of Ti6Al4V Alloy Simulated Physiological Solution, Biomaterials, 1997, 18, p 783–78710.1016/S0142-9612(96)00205-0 ↗
8. R. Brown, M.N. Alias, and R. Fontana, Effect of Composition and Thickness on Corrosion Behaviour of TiN and ZrN Films, Surf. Coat. Technol., 1993, 62, p 467–47310.1016/0257-8972(93)90285-V ↗
9. H. Ishizawa and M. Ogino, Formation and Characterization of Anodic Titanium Oxide Films Containing Ca and P, J. Biomed. Mater. Res., 1995, 29, p 65–7210.1002/jbm.820290110 ↗
10. I. Vaquila, L.I. Vergara, J.R. Passeggi, R.A. Vidal, and J. Ferron, Chemical Reactions at Surfaces: Titanium Oxidation, Surf. Coat. Technol., 1999, 122, p 67–7110.1016/S0257-8972(99)00420-X ↗
11. D.B. Haddow, S. Kothari, P.F. James, R.D. Short, P.V. Hatton, and R. van Noort, Synthetic Implant Surfaces: The Formation and Characterization of Sol-Gel Titania Films, Biomaterials, 1996, 17, p 501–50710.1016/0142-9612(96)82724-4 ↗
12. J.L. Gilbert, C.A. Buckley, et al., Intergranular Corrosion-Fatigue Failure of Cobalt-Alloy Femoral Stems, J. Bone Joint Surg., 1994, 76(1), p 110–11510.2106/00004623-199401000-00014 ↗
13. W.L. Jaffe and D.F. Scott, Total Hip Arthroplasty with Hydroxyapatite-Coated Prosthesis, J. Bone Joint Surg., 1996, 78(A12), p 1919–1934
14. D.W. Howie, S.D. Rogers, et al., Biological Effect of Cobalt Chrome in Cell and Animal Models, Clin. Orthop., 1996, 329S, p 217–23210.1097/00003086-199608001-00019 ↗
15. M.M. Edwin, V.A. Edward, J.S. Peter, and J.S. Neal, Exchange Nailing for Failure of Initially Rodded Tibial Shaft Fractures, J. Orthop., 2001, 24(8), p 757–76210.3928/0147-7447-20010801-17 ↗
16. H.G. Willer, L.G. Broback, and G.H. Buchorn, Crevice Corrosion of Cemented Titanium Hip Implants, Clin. Orthop., 1996, 333, p 51–57
17. B.F. Shagaldi and J. Compson, Wear and Corrosion of Sliding Counterparts of Stainless-Steel Hip Screw-Plates, Injury Int. J. Care Injured, 2000, 31, p 85–9210.1016/S0020-1383(99)00241-7 ↗
18. M.A. Khan, R.L. Wiliams, and D.F. Williams, Conjoint Corrosion and Wear Titanium Alloys, Biomaterials, 1999, 20, p 765–77210.1016/S0142-9612(98)00229-4 ↗
19. L. Reclaru, et al., Corrosion Behaviour of a Welded Stainless-Steel Orthopedic Implant, Biomaterials, 2001, 22, p 269–27910.1016/S0142-9612(00)00185-X ↗
20. J. Walczak, F. Shahgaldi, and F. Heatley, In Vivo Corrosion of 316L Stainless-Steel Implants, Biomaterials, 1998, 19, p 229–23710.1016/S0142-9612(97)00208-1 ↗
21. G. Berger, U. Ploska, and G. Willmann, Hydroxyapatite’s Solubility May Cause Loosening of Coated Implants, Proceedings of the 13th Int Symp on Ceramics in Medicine, Bologna, Italy, 2001, p 192–19510.4028/www.scientific.net/KEM.192-195.111 ↗
22. S.K. Tiwari, T. Mishra, M.K. Gunjan, A.S. Bhattacharyya, T.B. Singh, and R. Singh, Development and Characterization of Sol-Gel Silica-Alumina Composite Coatings on AISI, 316L for Implant Applications, Surf. Coat. Technol., 2007, 201, p 7582–758810.1016/j.surfcoat.2007.02.026 ↗
23. P. Ducheyne, S. Radin, M. Heughebaert, and J.C. Heughebaert, Calcium Phosphate Ceramic Coatings On Porous Titanium: Effect of Structure and Composition on Electrophoretic Deposition, Vacuum Sintering and In Vitro Dissolution, Biomaterials, 1990, 11, p 24410.1016/0142-9612(90)90005-B ↗
24. B. Aksakal and C. Hanyaloglu, Bioceramic Dip-Coating on Ti-6Al-4V and 316L SS Implant Materials, J. Mater. Sci.: Mater. Med., 2008, 19, p 2097–2104
25. T.M. Sridhar, U.K. Mudali, and M. Subbaiyan, Preparation and Characterization of EPD Hydroxyapatite Coatings on Type 316L SS, Corros. Sci., 2003, 45, p 237–25210.1016/S0010-938X(02)00091-4 ↗
26. G. Haicheng, G. Huifang, C. Shufen, and C. Laird, Orientaiton Dependence of Cyclic Deformation in High Purity Titanium Single Crystals, Mater. Sci. Eng. A, 1994, 118, p 23–3610.1016/0921-5093(94)90352-2 ↗
27. ASTM G1-94, ASTM Int., 2001, p 58–69
28. A.M. Gee Margaret, et al., Implant Retrieval Studies of the Wear and Loosening of Prosthetic Joints: A Review, Wear, 2000, 241, p 158–16510.1016/S0043-1648(00)00370-7 ↗
29. I. Aitchison and B. Cox, Interpretation of Fractographs of SSC in hexagonal metals, Corrosion, 1972, 28(3), p 83–8710.5006/0010-9312-28.3.83 ↗
30. J.R. Galvele, Tafel’s Law in Pitting Corrosion and Crevice Corrosion Susceptibility, Corros. Sci., 2005, 47, p 3053–306710.1016/j.corsci.2005.05.043 ↗
31. S. Kannan, A. Balamurugan, and S. Rajeswari, Hydroxyapatite Coatings on Sulfuric Acid Treated Type 316L SS and Its Electrochemical Behaviour in Ringer’s Solution, Mater. Lett., 2003, 57, p 2382–238910.1016/S0167-577X(02)01239-9 ↗
32. S. Kannan, A. Balamurugan, and S. Rajeswari, Electrochemical Characterization of Hydroxyapatite Coatings on HNO3 Passivated 316L SS for Implant Applications, Electrochem. Acta, 2005, 50, p 2065–207210.1016/j.electacta.2004.09.015 ↗
33. S. Suresh, Fatigue of Mater. Cambridge University Press, New York, 199810.1017/CBO9780511806575 ↗
34. A.C. Tas, Synthesis of Biomimetic Ca-Hydroxyapatite Powders at 37 °C in Synthetic Body Fluids, Biomaterials, 2000, 21(14), p 1429–143810.1016/S0142-9612(00)00019-3 ↗
35. A.C. Tas, F. Korkusuz, M. Timucin, and N. Akkas, An Investigation of the Chemical Synthesis and High-Temperature Sintering Behaviour of Calcium Hydroxyapatite (HA) and Tricalcium Phosphate (TCP) Bioceramics, J. Mater Sci: Mater. Med., 1997, 8, p 91–96