Influence of Surface Roughness on Corrosion and Tribological Behavior of CP-Ti After Thermal Oxidation Treatment
Source abstract
Abstract
In this study, tribological and corrosion behavior of commercially pure titanium (CP-Ti) with different surface roughness values after thermal oxidation was investigated. The CP-Ti specimens were prepared with three different roughness values from silicon carbide paper, Ra = 0.1, 0.3, and 0.6 μm, and the thermal oxidization process was conducted at a temperature of 850 °C for 8 h in an O2 atmosphere. Structural, mechanical, corrosion, and tribological properties of untreated and thermally oxidized CP-Ti with different surface roughness values were investigated through x-ray diffraction, scanning electron microscopy, microhardness, potensiostat, and pin-on-disk techniques. The corrosion and tribological behavior of CP-Ti improved as an oxide layer was formed by thermal oxidation. It was observed that the surface roughness had an effect on these characteristics. It was established that the decreased roughness improves the tribological and corrosion properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. D. Eylon, S.R. Seagle, Advances in Titanium Technology—An Overview, Keikinzoku/J. Jpn. Inst. Light Metals, 2000, 50 (8), 359-370.
2. W. Lee Williams: Proceedings of the International Conference on titanium: The Science, Technology and Application of Titanium, Pergamon Press, London, 1970.
3. J.R. Sobiecki, T. Wierzchon, J. Rudnicki, The Influence of Glow Discharge Nitriding, Oxynitriding and Carbonitriding on Surface Modification of Ti-1Al-1Mn Titanium Alloy Vacuum, 2001, 64, 41-46.10.1016/S0042-207X(01)00373-6 ↗
4. F. Galliano, E. Galvanetto, S. Mischler, D. Landolt, Tribocorrosion Behavior of Plasma Nitrided Ti-6Al-4 V Alloy in Neutral NaCl Solution, Surf. Coat.Technol., 2001, 145, 121-131.10.1016/S0257-8972(01)01309-3 ↗
5. H. Shibata, K. Tokaji, T. Ogava, C. Hori, The Effect of Gas Nitriding on Fatigue Behaviour in Titanium Alloys, Int. J. Fatigue, 1994, 16, 370-376.10.1016/0142-1123(94)90448-0 ↗
6. A. Grill and P.R. Aron, RF-Sputtered Silicon and Hafnium Nitride—Properties and Adhesion to 440C Stainless Steel, NASA Technical Paper, 1983.10.1016/0040-6090(83)90502-3 ↗
7. S. Malinov, Z. Guo, W. Sha, A. Wilson, Differential Scanning Calorimetry Study and Computer Modeling of β ⇒ α Phase Transformation in A Ti-6Al-4 V Alloy, Metall. Mater. Trans., 2001, A 32, 879-887.10.1007/s11661-001-0345-x ↗
8. K.T. Rie, T. Stucky, R.A. Silva, E. Leitao, Plasma Surface Treatment and PACVD on Ti Alloys for Surgical Implants, Surf. Coat. Technol. 74-75, 1995, 973-980.10.1016/0257-8972(95)08316-2 ↗
9. T. Bell, J. Lanagan, P.H. Morton, H.W. Bergmann, A.M. Staines, Surface Engineering of Titanium with Nitrogen, Surf. Eng., 1986, 2, 133-143.10.1179/sur.1986.2.2.133 ↗
10. S.K. Wu, H.C. Lin, C.Y. Lee, Gas Nitriding of an Equiatomic TiNi Shape Memory Alloy: II. Hardness, Wear and Shape Memory Ability, Surf. Coat. Technol., 1999,113 (1-2), 13-16.
11. K.G. Budinski, Tribological Properties of Titanium Alloys, Wear, 1991, 151, 203-217.10.1016/0043-1648(91)90249-T ↗
12. P. D. Miller, J. W. Holladay, Friction and Wear Properties of Titanium, Wear, 1958, 2, 133-140.10.1016/0043-1648(58)90428-9 ↗
13. M. Khaled, B.S. Yilbas and J. Shirokoff, Electrochemical Study of Laser Nitrided and PVD TiN Coated Ti-6Al-4 V Alloy: The Observation of Selective Dissolution, Surf. Coat. Technol., 2001, 148, 46-54.10.1016/S0257-8972(01)01326-3 ↗
14. A.S. Korhonen and E. Harju, Surface Engineering with Light Alloys-Hard Coatings, Thin Films, and Plasma Nitriding, J. Mater. Eng. Perform., 2000, 9, 302-305.10.1361/105994900770345953 ↗
15. B.Y. Chou and E. Chang, Plasma-Sprayed Hydroxyapatite Coating on Titanium Alloy with ZrO2 Second Phase and ZrO2 Intermediate Layer, Surf. Coat. Technol., 2002, 153, 84-92.10.1016/S0257-8972(01)01532-8 ↗
16. S.M. Johns, T. Bell, M. Samandi and G.A. Collins, Wear Resistance of Plasma Immersion Ion Implanted Ti6A14 V, Surf. Coat. Technol., 1996, 85, 7-14.10.1016/0257-8972(96)02884-8 ↗
17. A. Bloyce, P. Y. Qi, H. Dong, T. Bell, Surface Modification of Titanium Alloys for Combined Improvements in Corrosion and Wear Resistance, Surf. Coat. Technol., 1998, 107(2-3), 125-132.10.1016/S0257-8972(98)00580-5 ↗
18. C.Q. Yuan, Z. Peng, X.P. Yan and X.C. Zhou, Surface Roughness Evolutions in Sliding Wear Process, Wear, 2008, 265(3-4), 341-348.10.1016/j.wear.2007.11.002 ↗
19. B.J. Roylance, Wear Debris and Associated Wear Phenomena-Fundamental Research and Practice, Proc. Inst. Mech. Eng. J: J. Eng. Tribol., 2000, 214, 79–105.10.1243/1350650001543025 ↗
20. G.Chen, X.Wen and N.Zhang, Corrosion Resistance and Ion Dissolution of Titanium with Different Surface Microroughness, Bio-Med. Mater. Eng., 1998, 8, 61-74.
21. G.Bertrand,K.Jarraya, J.M.Chaix, Morphology of Oxide Scales Formed on Titanium, Oxid. Met., 1983, 21(1-2), 1-19.
22. H.Dong, A.Bloyce, P.H.Morton, T.Bell, Surface Engineering to Improve Tribological Performance of Ti-6Al-4V, Surf. Eng., 1997, 13(5), 402-406.10.1179/sur.1997.13.5.402 ↗
23. T.Bacci, F.Borgioli, E.Galvanetto, F.Galliano, B.Tesi, Wear Resistance of Ti-6Al-4V Alloy Treated by Means of Glow-Discharge and Furnace Treatments, Wear, 2000, 240,199-206.10.1016/S0043-1648(00)00362-8 ↗
24. Z.X. Zhang, H. Dong, T. Bell, B. Xu, The Effect of Treatment Condition on Boost Diffusion of Thermally Oxidised Titanium Alloy, J. Alloys Compd., 2007, 431, 1-2, 93-99.10.1016/j.jallcom.2006.05.045 ↗
25. F. Habashi, Handbook of Extractive Metallurgy, vol. 2. Wiley-VCH, Weinheim, 1989, pp 1130-1179.
26. P. A. Dearnley, K. L. Dahm, H. Cimenoglu, The Corrosion-Wear Behaviour of Thermally Oxidised Cp-Ti and Ti-6Al-4V, Wear, 2004, 256 (5), 469-479.10.1016/S0043-1648(03)00557-X ↗
27. H. Dong, T. Bell, Enhanced Wear Resistance of Titanium Surfaces by a New Thermal Oxidation Treatment, Wear, 2000, 238 (2), 131-137.10.1016/S0043-1648(99)00359-2 ↗
28. H. Dong, X. Y. Li, Oxygen Boost Diffusion for the Deep-Case Hardening of Titanium Alloys, Mater. Sci. Eng. A, 2000, 280 (2), 303-310.10.1016/S0921-5093(99)00697-8 ↗
29. W.Yan, X.X.Wang, Surface Hardening of Titanium by Thermal Oxidation, J. Mater. Sci., 2004, 39, 5583-5585.10.1023/B:JMSC.0000039294.73283.c8 ↗
30. D.Siva Rama Krishna, Y.L.Brama, Y.Sun, Thick Rutile Layer on Titanium for Tribological Applications, Tribol. Int., 2007, 40(2), 329-334.10.1016/j.triboint.2005.08.004 ↗
31. D.Maugis, G.Desalos-Andarell, A.Heurtal, R.Courtal, Adhesion and Friction on Al Thin Foils Related to Observed Dislocation Density, ASLE Trans., 21 (1978) 1-19.10.1080/05698197808982856 ↗
32. M.N. Gardos, H.S.Hong,W.O.Winer, Effect of Anion Vacancies on The Tribological Properties of Rutile (TiO2-x). Part II. Experimental Evidence, Tribol. Trans. 1990, 22, 209-222.10.1080/10402009008981949 ↗
33. P.J. Blau, C.B. Jolly, J. Qu, W.H. Peter, C.A. Blue, Tribological Investigation of Titanium-Based Materials for Brakes, Wear, 2007, 263(7-12), 1202-1211.10.1016/j.wear.2006.12.015 ↗
34. R.S. Magaziner, V.K. Jain, S. Mall, Wear Characterization of Ti-6Al-4V Under Fretting-Reciprocating Sliding Conditions, Wear, 2008, 264 (11-12), 1002-1014.10.1016/j.wear.2007.08.004 ↗
35. T. Hong, M. Nagumo, Effect of Surface Roughness on Early Stages of Pitting Corrosion of Type 301 Stainless Steel, Corros. Sci., 1997, 39, 1665-1672.10.1016/S0010-938X(97)00072-3 ↗
36. R. Narayanan, S.K. Seshadri, Point Defect Model and Corrosion of Anodic Oxide Coatings on Ti-6Al-4V, Corros. Sci., 2008, 50, 1521-1529.10.1016/j.corsci.2008.02.023 ↗