Investigating Wear Characteristics of Inconel 625 and VC-Based Claddings on EN8 Steel Developed by WAAM

1. R.M. Lehman, C.A. Cambardella, D.E. Stott, V. Acosta-Martinez, D.K. Manter, J.S. Buyer, and D.L. Karlen, Understanding and enhancing soil biological health: the solution for reversing soil degradation, Sustainability, 2015, 7(1), p 988–1027.10.3390/su7010988 ↗

2. V. Shashirekha, V. Sowmiya, R.B. Malleswari and Sundaram Seshadri, Conserving soil microbial population and sustainable agricultural practices—Polymers in aid of safe delivery, protection, population enhancement, and maintenance, Beneficial Microbes for Sustainable Agriculture Under Stress Conditions. Elsevier, 2024, p 313–358. https://doi.org/10.1016/B978-0-443-13193-6.00016-610.1016/B978-0-443-13193-6.00016-6 ↗

3. V.T. Gassner, D. Symeonidis and K. Koukaras, Harvesting of Agricultural Nutrient Runoff with Algae, to Produce New Soil Amendments for Urban and Peri-urban Olive Tree Agroforestry Systems in Southern Europe, Nature-based Solutions for Circular Management of Urban Water. Springer International Publishing, Cham, 2024, p 405–44110.1007/978-3-031-50725-0_23 ↗

4. Don Reicosky, Conservation agriculture systems: Soil health and landscape management, Advances in Conservation Agriculture Volume 1. A. Kassam Ed., Burleigh Dodds Science Publishing, 2020, p 87–154. https://doi.org/10.19103/AS.2019.0048.0310.19103/AS.2019.0048.03 ↗

5. Dixit, M., Ghoshal, D., Kumar, S., & Dutta, D. (2024). Enhancing Agriculture through Strategic Tillage and Soil Management: Unleashing Potential for Sustainable Farming. In Strategic Tillage and Soil Management-New Perspectives. IntechOpen.10.5772/intechopen.113038 ↗

6. Babar Iqbal, Guanlin Li, Khulood Fahad Alabbosh, Hamad Hussain, Ismail Khan, Muhammad Tariq, Qaiser Javed, Muhammad Naeem and Naveed Ahmad, Advancing environmental sustainability through microbial reprogramming in growth improvement, stress alleviation, and phytoremediation, Plant Stress, 2023, 10, p 100283. https://doi.org/10.1016/j.stress.2023.10028310.1016/j.stress.2023.100283 ↗

7. Gulati, A., Zhou, Y., Huang, J., Tal, A., Juneja, R., & Tal, A. (2021). Israeli agriculture—Innovation and advancement. From Food Scarcity to Surplus: Innovations in Indian, Chinese and Israeli Agriculture, 299-358.10.1007/978-981-15-9484-7_9 ↗

8. Balvinder Kaur, ShivaniDimri Mansi, Japneet Singh, Sadhna Mishra, Nikeeta Chauhan, Tanishka Kukreti, Bhaskar Sharma, Surya Prakash Singh, Shruti Arora, Diksha Uniyal, Yugank Agrawal, Saamir Akhtar, Muzamil Ahmad Rather, Bindu Naik, Vijay Kumar, Arun Kumar Gupta, Sarvesh Rustagi and Manpreet Singh Preet, Insights into the harvesting tools and equipment’s for horticultural crops: From then to now, Journal of Agriculture and Food Research, 2023, 14, p 100814. https://doi.org/10.1016/j.jafr.2023.10081410.1016/j.jafr.2023.100814 ↗

9. A. Hafezalkotob, A. Hami-Dindar, N. Rabie and A. Hafezalkotob, A decision support system for agricultural machines and equipment selection: A case study on olive harvester machines, Comput. Electron. Agric., 2018, 148, p 207–216.10.1016/j.compag.2018.03.012 ↗

10. Jeger, M., Beresford, R., Bock, C., Brown, N., Fox, A., Newton, A., ... & Yuen, J. (2021). Global challenges facing plant pathology: multidisciplinary approaches to meet the food security and environmental challenges in the mid-twenty-first century. CABI Agriculture and Bioscience, 2(1), 1-18.10.1186/s43170-021-00042-x ↗

11. Ikeabiama Ndubuisi Azuazu, Kabari Sam, Pablo Campo and Frederic Coulon, Challenges and opportunities for low-carbon remediation in the Niger Delta: towards sustainable environmental management, Science of The Total Environment, 2023, 900, p 165739. https://doi.org/10.1016/j.scitotenv.2023.16573910.1016/j.scitotenv.2023.165739 ↗

12. R. Lal, D.C. Reicosky and J.D. Hanson, Evolution of the plow over 10,000 years and the rationale for no-till farming, Soil and tillage research, 2007, 93(1), p 1–12.10.1016/j.still.2006.11.004 ↗

13. L. Green, E. Webb, E. Johnson, S. Wynn and C. Bogen, Cost-effective approach to explore key impacts on the environment from agricultural tools to inform sustainability improvements: inversion tillage as a case study, Environ. Sci. Eur., 2023, 35(1), p 79.10.1186/s12302-023-00784-7 ↗

14. A. Kassam and T. Friedrich, Conservation Agriculture: Concepts, worldwide experience, and lessons for success of CA-based systems in the semi-arid Mediterranean environments, Options Méditérr., 2010, 96, p 11–51.

15. Cheran Easwaran, SharmilaRahale Christopher, Gokulakrishnan Moorthy, Prasanthrajan Mohan, Raju Marimuthu, Vanitha Koothan and Saranya Nallusamy, Nano hybrid fertilizers: A review on the state of the art in sustainable agriculture, Science of The Total Environment, 2024, 929, p 172533. https://doi.org/10.1016/j.scitotenv.2024.17253310.1016/j.scitotenv.2024.172533 ↗

16. Athanasios Balafoutis, Bert Beck, Spyros Fountas, Jurgen Vangeyte, Tamme Wal, Iria Soto, Manuel Gómez-Barbero, Andrew Barnes and Vera Eory, Precision agriculture technologies positively contributing to GHG emissions mitigation, farm productivity and economics, Sustainability, 2017, 9(8), p 1339. https://doi.org/10.3390/su908133910.3390/su9081339 ↗

17. Ying Wang, Dong Li, Cheng Nie, Pan Gong, Junsheng Yang, Hu. Zhigang, Bin Li and Ming Ma, Research Progress on the Wear Resistance of Key Components in Agricultural Machinery, Materials, 2023, 16(24), p 7646. https://doi.org/10.3390/ma1624764610.3390/ma16247646 ↗

18. Derpsch, R., Kassam, A., Reicosky, D., Friedrich, T., Calegari, A., Basch, G., ... & dos Santos, D. R. (2024). Nature's laws of declining soil productivity and Conservation Agriculture. Soil Security, 14, 100127.10.1016/j.soisec.2024.100127 ↗

19. T.R. Mohan, J.P. Roselyn, R.A. Uthra, D. Devaraj and K. Umachandran, Intelligent machine learning based total productive maintenance approach for achieving zero downtime in industrial machinery, Comput. Ind. Eng., 2021, 157, 107267.10.1016/j.cie.2021.107267 ↗

20. A.L.C.M. Duarte and M.R.S. Santiago Scarpin, Maintenance practices and overall equipment effectiveness: testing the moderating effect of training, J. Qual. Maint. Eng., 2023, 29(2), p 442–459.nnn10.1108/JQME-04-2021-0033 ↗

21. X. Demeulenaere, The use of automotive fleets to support the diffusion of Alternative Fuel Vehicles: A Rapid Evidence Assessment of barriers and decision mechanisms, Res. Transp. Econ., 2019, 76, 100738.10.1016/j.retrec.2019.100738 ↗

22. Sourabh Jha, Huw C. Davies and Mukesh Pandey, Establishing the requirements to support improved adoption of alternate technologies for the long-haul road freight decarbonisation, Transportation Planning and Technology, 2024 https://doi.org/10.1080/03081060.2024.231107310.1080/03081060.2024.2311073 ↗

23. J. Singh, S.S. Chatha and B.S. Sidhu, Tribological performance of hardfaced and heat treated EN-47 steel used for tillage applications, Surf. Topogr. Metrol. Prop., 2020, 8(4), 045006.10.1088/2051-672X/abbb7f ↗

24. M.W. Strudley, T.R. Green and J.C. Ascough II., Tillage effects on soil hydraulic properties in space and time: State of the science, Soil and Tillage Research, 2008, 99(1), p 4–48.10.1016/j.still.2008.01.007 ↗

25. I. Domokos and S. Pálinkás, Application of Laser Remelting Technology in the Case of Cultivator Tines, Coatings, 2024, 14(5), p 637.10.3390/coatings14050637 ↗

26. Singh, H., Singh, R., Singh, G., Singh, T., Singh, A., & Singh, G. EXPERIMENTAL INVESTIGATION OF COATED AND UNCOATED SPECIMEN WEAR OF EN-15 B STEEL.

27. U.M. Angst, Challenges and opportunities in corrosion of steel in concrete, Mater. Struct., 2018, 51(1), p 4.10.1617/s11527-017-1131-6 ↗

28. X. Qin, X. Huang and S. Kaewunruen, Sustainable design and carbon-credited application framework of recycled steel fibre reinforced concrete, Developments in the Built Environment, 2024, 18, 100404.10.1016/j.dibe.2024.100404 ↗

29. T. Alsaeed, A. Eid Alajmi, J. GhanemAlotaibi and B.F. Yousif, Investigation on Three-Body Abrasion Resistance of Mild Steel Soil Slurry Condition-Simulating Agricultural Condition, Adv. Mater. Sci. Eng., 2023, 2023(1), p 5616909.nnn

30. R. Muraliraja, T.R. Tamilarasan, C.K. SanjithUdayakumar and Arvinda Pandian, The Effect of Fillers on the Tribological Properties of Composites, Tribological Applications of Composite Materials. M.T.Hameed. Sultan, MohdRidzuanMohd. Jamir, M.Abdul. Majid, A.I. Azmi, N. Saba Ed., Springer Singapore, Singapore, 2021, p 243–266. https://doi.org/10.1007/978-981-15-9635-3_910.1007/978-981-15-9635-3_9 ↗

31. Sarıkaya, M., Gupta, M. K., Tomaz, I., Pimenov, D. Y., Kuntoğlu, M., Khanna, N., ... & Krolczyk, G. M. (2021). A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys. CIRP Journal of Manufacturing Science and Technology, 35, 624-658.10.1016/j.cirpj.2021.08.005 ↗

32. B.R. Gupta, Friction and wear mechanism of polymers, their composites and nanocomposites, Tribology of polymers, polymer composites, and polymer nanocomposites. Elsevier, 2023, p 51–117. https://doi.org/10.1016/B978-0-323-90748-4.00012-110.1016/B978-0-323-90748-4.00012-1 ↗

33. Zhang, X., Yao, P., Li, Y., Jiang, L., Jin, X., Xu, J., ... & Liu, H. (2024). Mechanism analysis and modeling of surface roughness for CeO2 slurry-enhanced grinding BK7 optics. The International Journal of Advanced Manufacturing Technology, 131(5), 2017-2038.10.1007/s00170-022-10554-z ↗

34. Yadav, S., Sawarni, N., Dahiya, T., Rana, J. S., Sharma, M., & Batra, B. (2023). Nanoagriculture: Advantages and Drawbacks. In Agricultural and Environmental Nanotechnology: Novel Technologies and their Ecological Impact (pp. 3-42). Singapore: Springer Nature Singapore.10.1007/978-981-19-5454-2_1 ↗

35. Adeniran, J. A., Adebisi, J. A., Talabi, S. I., Yahaya, T., Ahmed, I. I., Mahamood, R. M., ... & Abdulkareem, S. (2023). Concentrations, sources, and health risks of potentially toxic elements in milled maize. Human and Ecological Risk Assessment: An International Journal, 29(9-10), 1318-1335.10.1080/10807039.2023.2266030 ↗

36. Y. Kumar Yadav, A. Kumar Singh and Siddhartha., Insights to improve the tribo-performance of materials used under slurry erosion applications: A review, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2023, 237(1), p 3–32.nnn10.1177/14644207221108565 ↗

37. L. Ma and R. Aghababaei, On the uniqueness of wear coefficient for abrasive wear at nanoscale, J. Tribol., 2023, 145(6), 062101.10.1115/1.4062099 ↗

38. K. Morshed-Behbahani, Z. Farhat and A. Nasiri, Effect of Surface Nanocrystallization on Wear Behavior of Steels: A Review, Materials, 2024, 17(7), p 1618.nnn10.3390/ma17071618 ↗

39. B. Li, P. Li, R. Zhou, X.Q. Feng and K. Zhou, Contact mechanics in tribological and contact damage-related problems: A review, Tribol. Int., 2022, 171, 107534.10.1016/j.triboint.2022.107534 ↗

40. K. Feng, J.C. Ji, Q. Ni and M. Beer, A review of vibration-based gear wear monitoring and prediction techniques, Mech. Syst. Signal Process., 2023, 182, 109605.10.1016/j.ymssp.2022.109605 ↗

41. A. Alfadhli, A. Alazemi and E. Khorshid, Numerical minimisation of abrasive-dust wear in internal combustion engines, Int. J. Surf. Sci. Eng., 2020, 14(1), p 68–88.nnn10.1504/IJSURFSE.2020.105891 ↗

42. W. Zhai, L. Bai, R. Zhou, X. Fan, G. Kang, Y. Liu and K. Zhou, Recent progress on wear-resistant materials: designs, properties, and applications, Advanced Science, 2021, 8(11), p 2003739.n10.1002/advs.202003739 ↗

43. R.A. Laghari, M. Jamil, A.A. Laghari, A.M. Khan, S.S. Akhtar and S. Mekid, A critical review on tool wear mechanism and surface integrity aspects of SiCp/Al MMCs during turning: prospects and challenges, The International Journal of Advanced Manufacturing Technology, 2023, 126(7), p 2825–2862.10.1007/s00170-023-11178-7 ↗

44. P. Bera, R.V. Lakshmi, S.M. Pathak, V. Bonu, L. Mishnaevsky Jr. and H.C. Barshilia, Recent Progress in the Development and Evaluation of Rain and Solid Particle Erosion Resistant Coatings for Leading Edge Protection of Wind Turbine Blades, Polym. Rev., 2024, 64(2), p 639–689.nnn10.1080/15583724.2023.2270050 ↗

45. S. Gorjian, H. Ebadi, M. Trommsdorff, H. Sharon, M. Demant and S. Schindele, The advent of modern solar-powered electric agricultural machinery: A solution for sustainable farm operations, J. Clean. Prod., 2021, 292, 126030.10.1016/j.jclepro.2021.126030 ↗

46. Vlăduţ, N. V., & Ungureanu, N. (2024). Beyond Agriculture 4.0: Design and Development of Modern Agricultural Machines and Production Systems. Agriculture, 14(7), 991.10.3390/agriculture14070991 ↗

47. G. Barzegari, A. Uromeihy and J. Zhao, Parametric study of soil abrasivity for predicting wear issue in TBM tunneling projects, Tunn. Undergr. Space Technol., 2015, 48, p 43–57.nnn10.1016/j.tust.2014.10.010 ↗

48. Sunil Mohan and Anita Mohan, Wear, friction and prevention of tribo-surfaces by coatings/nanocoatings, Anti-Abrasive Nanocoatings. Elsevier, 2015, p 3–22. https://doi.org/10.1016/B978-0-85709-211-3.00001-710.1016/B978-0-85709-211-3.00001-7 ↗

49. Rizzo, A., Goel, S., Luisa Grilli, M., Iglesias, R., Jaworska, L., Lapkovskis, V., ... & Valerini, D. (2020). The critical raw materials in cutting tools for machining applications: A review. Materials, 13(6), 1377.10.3390/ma13061377 ↗

50. B. Aramide, S. Pityana, R. Sadiku, T. Jamiru and P. Popoola, Improving the durability of tillage tools through surface modification—a review, The International Journal of Advanced Manufacturing Technology, 2021, 116(1), p 83–98.nnn10.1007/s00170-021-07487-4 ↗

51. Lelona Pradhan, Saptarshi Maiti, Aranya Mallick, Mohammad Shahid, Sandeep P. More and Ravindra V. Adivarekar, 3 Coating- and lamination-based smart textiles: techniques, features, and challenges, Smart and Functional Textiles. B. Adak, S. Mukhopadhyay Ed., De Gruyter, 2023, p 97–150. https://doi.org/10.1515/9783110759747-00310.1515/9783110759747-003 ↗

52. A.Z.A. Kadir, Y. Yusof and M.S. Wahab, Additive manufacturing cost estimation models—a classification review, The International Journal of Advanced Manufacturing Technology, 2020, 107, p 4033–4053.nnn10.1007/s00170-020-05262-5 ↗

53. Ranbir Singh Rooprai and Jaswinder Singh, Insights of 3D Printing Technology with Its Types, Additive Manufacturing with Medical Applications. H.K. Banga, R. Kumar, P. Kalra, R.M. Belokar Ed., CRC Press, Boca Raton, 2022, p 15–29. https://doi.org/10.1201/9781003301066-210.1201/9781003301066-2 ↗

54. Raushan, H., Bansal, A., Singh, V., Singla, A. K., Singla, J., Omer, A., ... & Rooprai, R. S. (2023). Dry sliding and slurry abrasion behaviour of wire arc additive manufacturing–Cold metal transfer (WAAM-CMT) cladded inconel 625 on EN8 steel. Tribology International, 179, 108176.10.1016/j.triboint.2022.108176 ↗

55. B.K. Chigilipalli and A. Veeramani, Investigations on dry sliding wear behavior of a wire arc additively manufactured nickel-based superalloy, Tribol. Trans., 2022, 65(5), p 912–923.10.1080/10402004.2022.2101569 ↗

56. Dongbo Guo, Tianqi Wang, Jinbao Tang, Mingli Wang and Liangyu Li, Influence of Interlayer Temperature on Microstructure and Mechanical Properties of Additively Manufactured Inconel 625, Journal of Materials Engineering and Performance, 2024, 33(22), p 12216–12226. https://doi.org/10.1007/s11665-023-08875-510.1007/s11665-023-08875-5 ↗

57. N. Khanna, D. Patel, P. Raval, J. Airao, V. Badheka and R.A.R. Rashid, Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625, Tribol. Int., 2024, 200, 110068.10.1016/j.triboint.2024.110068 ↗

58. Jacy K. Conrad, Pu. Xiaofei, Amey Khanolkar, Trishelle M. Copeland-Johnson, Corey D. Pilgrim, Joseph R. Wilbanks, Elizabeth H. Parker-Quaife and Gregory P. Horne, Radiolytic gas production from aluminum coupons (alloy 1100 and 6061) in helium environments—assessing the extended storage of aluminum clad spent nuclear fuel, Materials, 2022, 15(20), p 7317. https://doi.org/10.3390/ma1520731710.3390/ma15207317 ↗

59. Xiaoyu Zhong, Quanhua Xie, Yang Liu, Yuanyuan He, Nianbing Zhong, Zhouxiang Zhang, Hassan Karimi-Maleh, Xiaoling Peng and Eric Lichtfouse, Recent advances in optical fiber grating sensors for detection of organic substances, Chemical Engineering Journal, 2024, 492, p 152260. https://doi.org/10.1016/j.cej.2024.15226010.1016/j.cej.2024.152260 ↗

60. R.S. Rooprai, J. Singh and A. Bansal, Slurry abrasion behaviour of ERNiCrMo-3 cladding on EN8 steel developed by WAAM, Mater. Lett., 2024, 360, 136043.10.1016/j.matlet.2024.136043 ↗

61. A.K. Jha, B.K. Prasad, O.P. Modi, S. Das and A.H. Yegneswaran, Correlating microstructural features and mechanical properties with abrasion resistance of a high strength low alloy steel, Wear, 2003, 254(1–2), p 120–128.10.1016/S0043-1648(02)00309-5 ↗

62. J. Akram, P. Chalavadi, D. Pal and B. Stucker, Understanding grain evolution in additive manufacturing through modeling, Addit. Manuf., 2018, 21, p 255–268.nnn

63. J.W. Murray, A. Speidel, A. Spierings, I.J. Marsh and A.T. Clare, Extending powder lifetime in additive manufacturing: Chemical etching of stainless-steel spatter, Additive Manufacturing Letters, 2022, 3, 100057.10.1016/j.addlet.2022.100057 ↗

64. Y.C. Yang and E. Chang, Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti–6Al–4V substrate, Biomaterials, 2001, 22(13), p 1827–1836.nnn10.1016/S0142-9612(00)00364-1 ↗

65. D. Boruah and X. Zhang, Effect of post-deposition solution treatment and ageing on improving interfacial adhesion strength of cold sprayed Ti6Al4V coatings, Metals, 2021, 11(12), p 2038.nnn10.3390/met11122038 ↗

66. M.H. Ara, R.O. Ferreira, J.I. Pereira Agudelo, G. Pintaúde and C.R.D.F. Azevedo, Effect of Silica Size on the Relative Wear of Microstructures Containing Solidification Carbides and Tempered Martensite Using a Dry Sand Rubber Wheel Test, Tribol. Trans., 2024, 67(1), p 70–86.nnn10.1080/10402004.2023.2291109 ↗

67. R.S. Rooprai, H. Singh, T. Singh and Y.K. Singla, Analysis of the wear properties of through hardened AISI-4140 alloy steel using Taguchi technique, Materials Today: Proceedings, 2022, 50, p 661–664.nnn

68. R.S. Rooprai, T. Singh, M. Rana and V.K. Sharma, Optimization of wear parameters for AISI 4140 using Taguchi grey relational analysis, Materials Today: Proceedings, 2022, 50, p 293–296.

69. Ranbir Singh Rooprai, Harvinder Singh and Yogesh Kumar Singla, Investigate the Tribological Properties of AISI 4140 Alloy Steel Under Various Loads and Sliding Speed, IOP Conference Series: Materials Science and Engineering, 2021, 1145(1), p 012038. https://doi.org/10.1088/1757-899X/1145/1/01203810.1088/1757-899X/1145/1/012038 ↗

70. R. Khuengpukheiw, A. Wisitsoraat and C. Saikaew, Wear behaviors of HVOF-sprayed NiSiCrFeB, WC-Co/NiSiCrFeB and WC-Co coatings evaluated using a pin-on-disc tester with C45 steel pins, Wear, 2021, 484, 203699.10.1016/j.wear.2021.203699 ↗

71. W. Li, Q. Xin, B. Fan, Q. Chen and Y. Deng, A Review of Emerging Technologies in Ultra-Smooth Surface Processing for Optical Components, Micromachines, 2024, 15(2), p 178.10.3390/mi15020178 ↗

72. B.C. Kandpal, D.K. Gupta, A. Kumar, A.K. Jaisal, A.K. Ranjan, A. Srivastava and P. Chaudhary, Effect of heat treatment on properties and microstructure of steels, Materials Today: Proceedings, 2021, 44, p 199–205.nnnn

73. X. Wang, X. Ren, Y. Xue and B. Luan, Investigation on microstructure and high-temperature wear properties of high-speed laser cladding Inconel 625 alloy, J. Market. Res., 2024, 30, p 626–639.

74. R.S. Rooprai, A. Bansal and J. Singh, Influence of TiC powder content on wear behaviour of Inconel 625 clads developed by hybrid-mode wire arc additive manufacturing (WAAM) on EN-8 steel, Tribol. Int., 2023, 189, 108937.10.1016/j.triboint.2023.108937 ↗

75. J. Zhang, X. Wang, S. Paddea and X. Zhang, Fatigue crack propagation behaviour in wire+ arc additive manufactured Ti-6Al-4V: Effects of microstructure and residual stress, Mater. Des., 2016, 90, p 551–561.nnnn10.1016/j.matdes.2015.10.141 ↗

76. W. Zhai, N. Wu and W. Zhou, Effect of Interpass Temperature on Wire Arc Additive Manufacturing Using High-Strength Metal-Cored Wire, Metals, 2022, 12(2), p 212.10.3390/met12020212 ↗

77. D. Niebuhr, Friction and wear behavior of engineering materials in a simulated Martian (CO2) environment, a preliminary study, Wear, 2007, 263(1–6), p 88–92.10.1016/j.wear.2006.10.022 ↗

78. I.V. Kragelsky, M.N. Dobychin and V.S. Kombalov, Friction and wear: calculation methods, Elsevier, 2013.

79. S.D. Bakshi, P.H. Shipway and H.K.D.H. Bhadeshia, Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite, Wear, 2013, 308(1–2), p 46–53.nnn10.1016/j.wear.2013.09.008 ↗