Effects of Retrogression and Re-aging (RRA) Processes on Corrosion Properties in AA 7020 Aluminium Alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. M. Angappan, V. Sampath, B. Ashok, V.P. Deepkumar, Retrogression and Re-Aging Treatment on Short Transverse Tensile Properties of 7010 Aluminium Alloy Extrusions, Mater. Des., 2011, 32(7), p 4050–4053. https://doi.org/10.1016/j.matdes.2011.03.03410.1016/j.matdes.2011.03.034 ↗
2. Y. Reda, R. Abdel-Karim, I. Elmahallawi, Improvements in Mechanical and Stress Corrosion Cracking Properties in Al-alloy 7075 via Retrogression and Reaging, Mater. Sci. Eng., A, 2008, 485(1–2), p 468–475. https://doi.org/10.1016/j.msea.2007.08.02510.1016/j.msea.2007.08.025 ↗
3. K. Dudzik, Influence of Joining Method on Electrochemical Corrosion Properties of 7020 Aluminum Alloy Joints, Solid State Phenom., 2015, 220–221, p 589–594. https://doi.org/10.4028/www.scientific.net/SSP.220-221.58910.4028/www.scientific.net/SSP.220-221.589 ↗
4. M. Czechowski, Low-Cycle Fatigue of Friction Stir Welded Al–Mg Alloys, J. Mater. Process. Technol., 2005, 164–165, p 1001–1006. https://doi.org/10.1016/j.jmatprotec.2005.02.07810.1016/j.jmatprotec.2005.02.078 ↗
5. K. Dudzik, M. Czechowski, Stress Corrosion Cracking of 5083 and 7020 Aluminium Alloys Jointed by Friction Stir Welding, Solid State Phenom., 2010, 165, p 37–42. https://doi.org/10.4028/www.scientific.net/SSP.165.3710.4028/www.scientific.net/SSP.165.37 ↗
6. K. Dudzik, M. Czechowski, Analysis of Possible Shipbuilding Application of Friction Stir Welding (FSW) Method to Joining Elements Made of AlZn5Mg1 Alloy, Polish Maritime Research, 2009, 16(4), p 38–40. https://doi.org/10.2478/v10012-008-0054-010.2478/v10012-008-0054-0 ↗
7. M. Dixit, R.S. Mishra, K.K. Sankaran, Structure–Property Correlations in Al 7050 and Al 7055 High-Strength Aluminum Alloys, Mater. Sci. Eng., A, 2008, 478(1–2), p 163–172. https://doi.org/10.1016/j.msea.2007.05.11610.1016/j.msea.2007.05.116 ↗
8. X. Wang, J. Wang, C. Fu, Characterization of Pitting Corrosion of 7A60 Aluminum Alloy by EN and EIS Techniques, Trans. Nonferrous Metals Soc. China, 2014, 24(12), p 3907–3916. https://doi.org/10.1016/S1003-6326(14)63550-010.1016/S1003-6326(14)63550-0 ↗
9. A.V. Sameljuk, O.D. Neikov, A.V. Krajnikov, Yu.V. Milman, G.E. Thompson, X. Zhou, Effect of Rapid Solidification on the Microstructure and Corrosion Behaviour of Al–Zn–Mg Based Material, Corros. Sci., 2007, 49(2), p 276–286. https://doi.org/10.1016/j.corsci.2006.05.04210.1016/j.corsci.2006.05.042 ↗
10. A. Alsamuraee, H. Ameen, S. Al-Rubaiey, Evaluation of the Pitting Corrosion for Aluminum Alloys 7020 in 3.5% NaCl Solution with Range of Temperature (100–500) °C, Am. J. Sci. Ind. Res., 2011, 2(2), p 283–296. https://doi.org/10.5251/ajsir.2011.2.2.283.29610.5251/ajsir.2011.2.2.283.296 ↗
11. I. Baruch M. Cina, Ramat Gan, “United States Patent” ,1974, p 1–4. https://doi.org/10.1074/JBC.274.42.30033.(51).10.1074/JBC.274.42.30033.(51 ↗
12. T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre, B. Baroux, Evolution of Precipitate Microstructures During the Retrogression and Re-Ageing Heat Treatment of an Al–Zn–Mg–Cu Alloy, Acta Mater., 2010, 58(14), p 4814–4826. https://doi.org/10.1016/j.actamat.2010.05.01710.1016/j.actamat.2010.05.017 ↗
13. A. Azarniya, A.K. Taheri, K.K. Taheri, Recent Advances in Ageing of 7xxx Series Aluminum Alloys: A Physical Metallurgy Perspective, J. Alloys Compd., 2019, 781, p 945–983. https://doi.org/10.1016/j.jallcom.2018.11.28610.1016/j.jallcom.2018.11.286 ↗
14. M.M. Lachowicz, Metallurgical Aspects of the Corrosion Resistance of 7000 Series Aluminum Alloys—A Review, Mater. Sci.-Pol., 2023, 41(3), p 159–180. https://doi.org/10.2478/msp-2023-004110.2478/msp-2023-0041 ↗
15. E. Georgantzia, M. Gkantou, G.S. Kamaris, Aluminium Alloys as Structural Material: A Review of Research, Eng. Struct., 2021, 227, 111372. https://doi.org/10.1016/j.engstruct.2020.11137210.1016/j.engstruct.2020.111372 ↗
16. G. Polat, Z.A. Erdal, Y.E. Kalay, Design of Novel Non-equiatomic Cu-Ni-Al-Ti Composite Medium-Entropy Alloys, J. Mater. Eng. Perform., 2020, 29(5), p 2898–2908. https://doi.org/10.1007/s11665-020-04830-w10.1007/s11665-020-04830-w ↗
17. A. Fakioglu, D. Özyürek, Effects of Re-Aging on the Fatigue Properties of Aluminum Alloy AA7075, Mater. Test., 2014, 56(7–8), p 575–582. https://doi.org/10.3139/120.11059810.3139/120.110598 ↗
18. M. Kanno, I. Araki, Q. Cui, Precipitation Behaviour of 7000 Alloys During Retrogression and Reaging Treatment, Mater. Sci. Technol., 1994, 10(7), p 599–603. https://doi.org/10.1179/mst.1994.10.7.59910.1179/mst.1994.10.7.599 ↗
19. N.C. Danh, K. Rajan, W. Wallace, A TEM Study of Microstructural Changes During Retrogression and Reaging in 7075 Aluminum, Metall. Trans. A, 1983, 14(9), p 1843–1850. https://doi.org/10.1007/BF0264555410.1007/BF02645554 ↗
20. J.K. Park, A.J. Ardell, Microstructures of the Commercial 7075 Al Alloy in the T651 and T7 tempers, Metall. Trans. A, 1983, 14(10), p 1957–1965. https://doi.org/10.1007/BF0266236310.1007/BF02662363 ↗
21. C. Meng, H. Long, Y. Zheng, A Study of the Mechanism of Hardness Change of Al-Zn-Mg alloy During Retrogression Reaging Treatments by Small Angle X-ray Scattering (SAXS), Metall. Mater. Trans. A., 1997, 28(10), p 2067–2071. https://doi.org/10.1007/s11661-997-0163-x10.1007/s11661-997-0163-x ↗
22. N. Kamp, I. Sinclair, M.J. Starink, Toughness-Strength Relations in the Overaged 7449 al-Based Alloy, Metall. Mater. Trans. A., 2002, 33(4), p 1125–1136. https://doi.org/10.1007/s11661-002-0214-210.1007/s11661-002-0214-2 ↗
23. S. Kumar, T.K.G. Namboodhiri, Precipitation Hardening and Hydrogen Embrittlement of Aluminum Alloy AA7020, Bull. Mater. Sci., 2011, 34(2), p 311–321. https://doi.org/10.1007/s12034-011-0066-810.1007/s12034-011-0066-8 ↗
24. L. Xıwu, B. Xıong, Y. Zhang, B. Zhu, H. Lıu, L. Zhıhuı, The Effect of Rra on The Mıcrostructure and Propertıes of A Novel, Int. J. Mod. Phys. B, 2009, 23(06n07), p 900–905. https://doi.org/10.1142/S021797920906021X10.1142/S021797920906021X ↗
25. W. Li, Q. Pan, Y. Xiao, Y. He, X. Liu, Microstructure and Mechanical Properties of Al-Zn-Cu-Mg-Sc-Zr Alloy after Retrogression and Re-Aging Treatments, J. Cent. South. Univ., 2011, 18(2), p 279–284. https://doi.org/10.1007/s11771-011-0691-910.1007/s11771-011-0691-9 ↗
26. R. Su, Y. Qu, J. You, R. Li, Study on a New Retrogression and Re-Aging Treatment of Spray Formed Al–Zn–Mg–Cu Alloy, J. Mater. Res., 2016, 31(5), p 573–579. https://doi.org/10.1557/jmr.2016.4410.1557/jmr.2016.44 ↗
27. S. Krishnanunni, R.K. Gupta, G. Ajithkumar, V. Anil Kumar, Optimization of Heat Treatment Cycles and Characterization of Aluminum Alloy AA7010, J. Mater. Eng. Perform., 2019, 28(2), p 776–787.10.1007/s11665-019-3861-9 ↗
28. M.C. Paulisch, N. Wanderka, M. Haupt, S. Selve, I. Driehorst, W. Reimers, The Influence of Heat Treatments on the Microstructure and the Mechanical Properties in Commercial 7020 Alloys, Mater. Sci. Eng., A, 2015, 626, p 254–262. https://doi.org/10.1016/j.msea.2014.12.04010.1016/j.msea.2014.12.040 ↗
29. R. Ranganatha, V.A. Kumar, V.S. Nandi, R.R. Bhat, B.K. Muralidhara, Multi-Stage Heat Treatment of Aluminum Alloy AA7049, Trans. Nonferrous Metals Soc. China, 2013, 23(6), p 1570–1575. https://doi.org/10.1016/S1003-6326(13)62632-110.1016/S1003-6326(13)62632-1 ↗
30. G. Özer, I. Kaya, A. Karaaslan, Effects of Retrogression and Reaging Heat Treatment on the Microstructure, Exfoliation Corrosion, Electrical Conductivity, and Mechanical Properties of AA7050, Mater. Corros., 2019, 70(10), p 1788–1797. https://doi.org/10.1002/maco.20191088710.1002/maco.201910887 ↗
31. G. Özer, A. Karaaslan, Relationship of RRA Heat Treatment with Exfoliation Corrosion, Electrical Conductivity and Microstructure of AA7075 Alloy, Mater. Corros., 2017, 68(11), p 1260–1267. https://doi.org/10.1002/maco.20170949710.1002/maco.201709497 ↗
32. H. Jiao, C. Li, The HREM Study of Precipitates in an Al−Zn−Mg Alloy, Adv. Perform. Mater., 1995, 2(3), p 305–309. https://doi.org/10.1007/BF0070545310.1007/BF00705453 ↗
33. N.Q. Chinh, J. Lendvai, D.H. Ping, K. Hono, The Effect of Cu on Mechanical and Precipitation Properties of Al–Zn–Mg Alloys, J. Alloys Compd., 2004, 378(1), p 52–60. https://doi.org/10.1016/j.jallcom.2003.11.17510.1016/j.jallcom.2003.11.175 ↗
34. A.K. Mukhopadhyay, Guinier-Preston Zones in a High-Purity Al-Zn-Mg Alloy, Philos. Mag. Lett., 1994, 70(3), p 135–140. https://doi.org/10.1080/0950083940824096610.1080/09500839408240966 ↗
35. Q.C. Nguyen, Z. Kovács, L. Reich, F. Székely, J. Illy, J. Lendvai, Precipitation and Work Hardening in High Strength AlZnMg(Cu, Zr) Alloys, Mater. Sci. Forum, 1996, 217–222, p 1293–1298. https://doi.org/10.4028/www.scientific.net/MSF.217-222.129310.4028/www.scientific.net/MSF.217-222.1293 ↗
36. G. Sha, A. Cerezo, Characterization of Precipitates in an Aged 7 xxx Series Al Alloy, Surf. Interface Anal., 2004, 36(5–6), p 564–568. https://doi.org/10.1002/sia.170210.1002/sia.1702 ↗
37. K. Hono, N. Sano and T. Sakurai, Quantitative Atom-Probe Analysis of Some Aluminum Alloys, Surf. Sci., 1992, 266(1), p 350–357. https://doi.org/10.1016/0039-6028(92)91045-D10.1016/0039-6028(92)91045-D ↗
38. S.R. Ortner, C.R.M. Grovenor, B.A. Shollock, On the Structure and Composition of G-P Zones in High Purity AlZnMg Alloys, Scr. Metall., 1988, 22(6), p 839–842. https://doi.org/10.1016/S0036-9748(88)80060-710.1016/S0036-9748(88)80060-7 ↗
39. L.K. Berg et al., GP-Zones in Al–Zn–Mg Alloys and Their Role in Artificial Aging, Acta Mater., 2001, 49(17), p 3443–3451. https://doi.org/10.1016/S1359-6454(01)00251-810.1016/S1359-6454(01)00251-8 ↗
40. M.C. Paulisch, N. Wanderka, M. Haupt, S. Selve, I. Driehorst, W. Reimers, The Influence of Heat Treatments on the Microstructure and the Mechanical Properties in Commercial 7020 Alloys, Mater. Sci. Eng., A, 2015, 626, p 254–262. https://doi.org/10.1016/j.msea.2014.12.04010.1016/j.msea.2014.12.040 ↗
41. M. Kumar, C. Poletti, H.P. Degischer, Precipitation Kinetics in Warm Forming of AW-7020 alloy, Mater. Sci. Eng., A, 2013, 561, p 362–370. https://doi.org/10.1016/j.msea.2012.10.03110.1016/j.msea.2012.10.031 ↗
42. C. Feng, Z. Liu, A. Ning, Y. Liu, S. Zeng, Retrogression and Re-Aging Treatment of Al-9.99%Zn-1.72%Cu-2.5%Mg-0.13%Zr aluminum alloy, Trans. Nonferrous Metals Soc. China, 2006, 16(5), p 1163–1170. https://doi.org/10.1016/S1003-6326(06)60395-610.1016/S1003-6326(06)60395-6 ↗
43. Y. Qiu et al., Influence of Grain Boundary Precipitates on Intergranular Corrosion Behavior of 7050 Al Alloys, Coatings, 2022, 12(2), p 249. https://doi.org/10.3390/coatings1202024910.3390/coatings12020249 ↗
44. X. Peng, Y. Li, G. Xu, J. Huang, Z. Yin, Effect of Precipitate State on Mechanical Properties, Corrosion Behavior, and Microstructures of Al–Zn–Mg–Cu Alloy, Met. Mater. Int., 2018, 24(5), p 1046–1057. https://doi.org/10.1007/s12540-018-0057-z10.1007/s12540-018-0057-z ↗
45. M.B. Kannan, V.S. Raja, Influence of Heat Treatment and Scandium Addition on the Electrochemical Polarization Behavior of Al-Zn-Mg-Cu-Zr Alloy, Metall. Mater. Trans. A., 2007, 38(11), p 2843–2852. https://doi.org/10.1007/s11661-007-9303-610.1007/s11661-007-9303-6 ↗
46. Y.-P. Xiao, Q.-L. Pan, W.-B. Li, X.-Y. Liu, Y.-B. He, Influence of Retrogression and Re-Aging Treatment on Corrosion Behaviour of an Al–Zn–Mg–Cu Alloy, Mater. Des., 2011, 32(4), p 2149–2156. https://doi.org/10.1016/j.matdes.2010.11.03610.1016/j.matdes.2010.11.036 ↗
47. Y. Deng, Z. Yin, K. Zhao, J. Duan, J. Hu, Z. He, Effects of Sc and Zr Microalloying Additions And Aging Time at 120°C on the Corrosion Behaviour of an Al–Zn–Mg Alloy, Corros. Sci., 2012, 65, p 288–298. https://doi.org/10.1016/j.corsci.2012.08.02410.1016/j.corsci.2012.08.024 ↗
48. M.K. Cavanaugh, N. Birbilis, R.G. Buchheit, F. Bovard, Investigating Localized Corrosion Susceptibility Arising from Sc CONTAINING intermetallic Al3Sc in High Strength Al-alloys, Scr. Mater., 2007, 56(11), p 995–998. https://doi.org/10.1016/j.scriptamat.2007.01.03610.1016/j.scriptamat.2007.01.036 ↗
49. M.K. Cavanaugh, R.G. Buchheit, N. Birbilis, Evaluation of a Simple Microstructural-Electrochemical Model for Corrosion Damage Accumulation in Microstructurally complex aluminum alloys, Eng. Fract. Mech., 2009, 76(5), p 641–650. https://doi.org/10.1016/j.engfracmech.2008.11.00310.1016/j.engfracmech.2008.11.003 ↗
50. M. Bobby-Kannan, V.S. Raja, R. Raman, A.K. Mukhopadhyay, Influence of Multistep Aging on the Stress Corrosion Cracking Behavior of Aluminum Alloy 7010, Corrosion, 2003, 59(10), p 881–889. https://doi.org/10.5006/1.328770910.5006/1.3287709 ↗
51. L. Huang, K. Chen, S. Li, Influence of Grain-Boundary Pre-Precipitation and Corrosion Characteristics of Inter-Granular Phases on Corrosion Behaviors of an Al–Zn–Mg–Cu Alloy, Mater. Sci. Eng., B, 2012, 177(11), p 862–868. https://doi.org/10.1016/j.mseb.2012.04.00810.1016/j.mseb.2012.04.008 ↗
52. M. Bobby Kannan, V.S. Raja, Enhancing Stress Corrosion Cracking Resistance in Al–Zn–Mg–Cu–Zr Alloy Through Inhibiting Recrystallization, Eng Fract Mech, 2010, 77(2), p 249–256. https://doi.org/10.1016/j.engfracmech.2009.06.00610.1016/j.engfracmech.2009.06.006 ↗
53. L. Wen, Y. Wang, Y. Zhou, L. Guo, J.-H. Ouyang, Microstructure and Corrosion Resistance of Modified 2024 Al Alloy Using Surface Mechanical Attrition Treatment Combined with Microarc Oxidation Process, Corros. Sci., 2011, 53(1), p 473–480. https://doi.org/10.1016/j.corsci.2010.09.06110.1016/j.corsci.2010.09.061 ↗
54. K. Venkateswarlu, V. Rajinikanth, A.K. Ray, C. Xu, T.G. Langdon, The Characteristics of Aluminum–Scandium Alloys Processed by ECAP, Mater. Sci. Eng., A, 2010, 527(6), p 1448–1452. https://doi.org/10.1016/j.msea.2009.10.04710.1016/j.msea.2009.10.047 ↗
55. S. Chen, K. Chen, G. Peng, L. Jia, P. Dong, Effect of Heat Treatment on Strength, Exfoliation Corrosion and Electrochemical Behavior of 7085 Aluminum Alloy, Mater. Des., 2012, 35, p 93–98. https://doi.org/10.1016/j.matdes.2011.09.03310.1016/j.matdes.2011.09.033 ↗
56. J.F. Li, N. Birbilis, C.X. Li, Z.Q. Jia, B. Cai, Z.Q. Zheng, Influence of Retrogression Temperature and time on The Mechanical Properties and Exfoliation Corrosion Behavior of Aluminium Alloy AA7150, Mater. Charact., 2009, 60(11), p 1334–1341. https://doi.org/10.1016/j.matchar.2009.06.00710.1016/j.matchar.2009.06.007 ↗
57. S. Maitra, G.C. English, Environmental Factors Affecting Localized Corrosion of 7075–t7351 Aluminum Alloy Plate, Metall. Trans. A, 1982, 13(1), p 161–166. https://doi.org/10.1007/BF0264242810.1007/BF02642428 ↗
58. Y. He, X. Wang, J. Hu, Q. Zhou, H. Chen, Effect of Cu Content on Exfoliation Corrosion and Electrochemical Corrosion of A7N01 ALUMINUM alloy in EXCO Solution, Int. J. Mod. Phys. B, 2017, 31(16–19), p 1744005. https://doi.org/10.1142/S021797921744005210.1142/S0217979217440052 ↗
59. D.K. Xu, N. Birbilis, P.A. Rometsch, The Effect of Pre-Ageing Temperature and Retrogression Heating Rate on the Strength and Corrosion Behaviour of AA7150, Corros. Sci., 2012, 54, p 17–25. https://doi.org/10.1016/j.corsci.2011.08.04210.1016/j.corsci.2011.08.042 ↗
60. W. Zhang, G.S. Frankel, Localized Corrosion Growth Kinetics in AA2024 Alloys, J. Electrochem. Soc., 2002, 149(11), p B510. https://doi.org/10.1149/1.151398410.1149/1.1513984 ↗
61. S.P. Knight, M. Salagaras, A.M. Wythe, F. De Carlo, A.J. Davenport, A.R. Trueman, In Situ X-ray Tomography of Intergranular Corrosion of 2024 and 7050 Aluminium Alloys, Corros. Sci., 2010, 52(12), p 3855–3860. https://doi.org/10.1016/j.corsci.2010.08.02610.1016/j.corsci.2010.08.026 ↗
62. J.A. DeRose, T. Suter, A. Bałkowiec, J. Michalski, K.J. Kurzydlowski, P. Schmutz, Localised Corrosion Initiation and Microstructural Characterisation of an Al 2024 Alloy with a higher Cu to Mg Ratio, Corros. Sci., 2012, 55, p 313–325. https://doi.org/10.1016/j.corsci.2011.10.03510.1016/j.corsci.2011.10.035 ↗
63. T. Ramgopal, P. Schmutz, G.S. Frankel, Electrochemical Behavior of Thin Film Analogs of Mg ( Zn, Cu, Al ) 2, J. Electrochem. Soc., 2001, 148(9), p B348. https://doi.org/10.1149/1.138662610.1149/1.1386626 ↗
64. N. Birbilis, R.G. Buchheit, Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys: An Experimental Survey and Discussion, J. Electrochem. Soc., 2005, 152(4), p B140. https://doi.org/10.1149/1.186998410.1149/1.1869984 ↗
65. N. Birbilis, R.G. Buchheit, M.K. Cavanaugh, Electrochemical Response of AA7075-T651 Following Immersion in NaCl Solution, ECS Trans., 2006, 1(4), p 115. https://doi.org/10.1149/1.221549510.1149/1.2215495 ↗
66. X. Xiao, Z. Zhou, C. Liu, L. Cao, Microstructure and Its Effect on the Intergranular Corrosion Properties of 2024–T3 Aluminum Alloy, Crystals (Basel), 2022, 12(3), p 395. https://doi.org/10.3390/cryst1203039510.3390/cryst12030395 ↗