Solid Particle Erosion and Scratch Wear Behavior of NiTi Smart Alloy Modified Mild Steel Using Atmospheric Plasma Spray Technology at Different Substrate Preheating Temperatures
Source abstract
Abstract
Solid particle erosion is a severe problem for a machine working in a sandy environment. Due to this service, life of instruments decreases as comparision to the requirement. In this research, the elemental composition of Ni50Ti50 has been taken to coat mild steel substrate at different substrate preheating temperatures (100, 200, 300 and 400 °C). An atmospheric plasma spraying procedure has been used to spray uniform deposition of NiTi powder on the mild steel substrate. After coating, an x-Ray diffractometer (XRD), scratch tester and scanning electron microscopy (SEM) were applied to measure the surface property. The wear property was investigated by air jet erosion test rig at 45° and 90° impingement angles. Again, the eroded surface morphology was investigated by SEM. Various phases such as NiTi, Ti2Ni, Ni3Ti, Ni4Ti3, Ti2O, TiO2 and NiO are obtained by XRD analysis. NiTi and their intermetallics (such as Ni4Ti3, Ni3Ti, TiO2) play an important role in forming dense splat formation and higher hardness. Several erosion mechanisms were obtained, such as scratches, splat fragmentation and plastic deformation. It was noticed that the erosion rate is relatively low at low substrate preheating temperatures compared to higher preheating temperatures. Scratch wear resistance for low preheating temperature is high as compared to high preheating temperature due to variations of NiTi intermetallic phases on the coating surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Erosion and Abrasive Machining · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. S.B. Mishra, K. Chandra, S. Prakash, and B. Venkataraman, Erosion Performance of Coatings Produced by Shrouded Plasma Spray Process on a Co-Based Superalloy, Surf. Coatings Technol., 2006, 201(3–4), p 1477–1487. https://doi.org/10.1016/j.surfcoat.2006.02.02810.1016/j.surfcoat.2006.02.028 ↗
2. “Solid Particle Erosion,” (London), Springer London, 2008, doi: https://doi.org/10.1007/978-1-84800-029-2.10.1007/978-1-84800-029-2 ↗
3. A. Sareen, C.A. Sapre, and M.S. Selig, Effects of Leading Edge Erosion on Wind Turbine Blade Performance, Wind Energy, 2014, 17(10), p 1531–1542. https://doi.org/10.1002/we.164910.1002/we.1649 ↗
4. H. Arabnejad, A. Mansouri, S.A. Shirazi, and B.S. McLaury, Development of Mechanistic Erosion Equation for Solid Particles, Wear, 2015, 332–333, p 1044–1050. https://doi.org/10.1016/j.wear.2015.01.03110.1016/j.wear.2015.01.031 ↗
5. M. Ivosevic, R. Knight, S.R. Kalidindi, G.R. Palmese, and J.K. Sutter, Solid Particle Erosion Resistance of Thermally Sprayed Functionally Graded Coatings for Polymer Matrix Composites, Surf. Coatings Technol., 2006, 200(16–17), p 5145–5151. https://doi.org/10.1016/j.surfcoat.2005.05.03810.1016/j.surfcoat.2005.05.038 ↗
6. “Operation of Gas Turbine Engines in Hot and Sandy Conditions: Royal Air Force Experiences in the Gulf Conflict. National Technical Reports Library - NTIS,” n.d., https://ntrl.ntis.gov/NTRL/dashboard/searchResults/titleDetail/N9519655.xhtml. Accessed 4 February 2023.
7. A. Murch, U.S.A.F. Fellow, T. Division, C. Bolkcom, and T. Division, F-35 Lightning II Joint Strike Fighter (JSF) Program: Background, Status, and Issues Updated October 25, 2007 U. S. Air Force Fellow Christopher Bolkcom Specialist in National Defense Foreign Affairs, Defense, and Trade Division, (2007)
8. S. Kumar Patel, B. Swain, R. Roshan, N.K. Sahu, and A. Behera, A Brief Review of Shape Memory Effects and Fabrication Processes of NiTi Shape Memory Alloys, Mater. Today Proc., 2020, 33, p 5552–5556. https://doi.org/10.1016/j.matpr.2020.03.53910.1016/j.matpr.2020.03.539 ↗
9. Y. Oshida and S. Miyazaki, Corrosion and Biocompatibility of Shape Memory Alloys, Zairyo-to-Kankyo, 1991, 40(12), p 834–844. https://doi.org/10.3323/jcorr1991.40.83410.3323/jcorr1991.40.834 ↗
10. Y. Shida and Y. Sugimoto, Water Jet Erosion Behaviour of Ti-Ni Binary Alloys, Wear, 1991, 146(2), p 219–228. https://doi.org/10.1016/0043-1648(91)90064-210.1016/0043-1648(91)90064-2 ↗
11. A.P. Jardine, Y. Field, and H. Herman, Shape Memory Effect in Vacuum Plasma Sprayed NiTi, J. Mater. Sci. Lett., 1991, 10(16), p 943–945. https://doi.org/10.1007/BF0072214010.1007/BF00722140 ↗
12. H.C. Lin, S.K. Wu, and M.T. Yeh, Damping Characteristics of TiNi Shape Memory Alloys, Metall. Mater. Trans. A, 1993, 24(10), p 2189–2194. https://doi.org/10.1007/BF0264859310.1007/BF02648593 ↗
13. K. Melton and O. Mercier, Fatigue of NITI Thermoelastic Martensites, Acta Metall., 1979, 27(1), p 137–144. https://doi.org/10.1016/0001-6160(79)90065-810.1016/0001-6160(79)90065-8 ↗
14. R. Westergård, L.C. Erickson, N. Axén, H.M. Hawthorne, and S. Hogmark, The Erosion and Abrasion Characteristics of Alumina Coatings Plasma Sprayed under Different Spraying Conditions, Tribol. Int., 1998, 31(5), p 271–279. https://doi.org/10.1016/S0301-679X(98)00033-410.1016/S0301-679X(98)00033-4 ↗
15. B. Swain and A. Behera, Effect of Powder Feed Rate on Adhesion Strength and Microhardness of APS NiTi Coating: A Microstructural Investigation, Surf. Topogr. Metrol. Prop., 2021, 9(2), p 025039. https://doi.org/10.1088/2051-672X/ac0a3810.1088/2051-672X/ac0a38 ↗
16. B. Swain, S. Chatterjee, S.S. Mohapatra, and A. Behera, Mechanical Properties Evaluation and Parametric Optimization of Atmospheric Plasma Spray NiTi Coating, J. Mater. Eng. Perform., 2022, 31(10), p 8270–8284. https://doi.org/10.1007/s11665-022-06834-010.1007/s11665-022-06834-0 ↗
17. N. Cinca, A. Isalgué, J. Fernández, and J.M. Guilemany, Structure Characterization and Wear Performance of NiTi Thermal Sprayed Coatings, Smart Mater. Struct., 2010, 19(8), p 085011. https://doi.org/10.1088/0964-1726/19/8/08501110.1088/0964-1726/19/8/085011 ↗
18. H. Hiraga, T. Inoue, H. Shimura, and A. Matsunawa, Cavitation Erosion Mechanism of NiTi Coatings Made by Laser Plasma Hybrid Spraying, Wear, 1999, 231(2), p 272–278. https://doi.org/10.1016/S0043-1648(99)00133-710.1016/S0043-1648(99)00133-7 ↗
19. J.M. Guilemany, N. Cinca, S. Dosta, and A.V. Benedetti, Corrosion Behaviour of Thermal Sprayed Nitinol Coatings, Corros. Sci., 2009, 51(1), p 171–180. https://doi.org/10.1016/j.corsci.2008.10.02210.1016/j.corsci.2008.10.022 ↗
20. Z. Shi, J. Wang, Z. Wang, Y. Qiao, T. Xiong, and Y. Zheng, Cavitation Erosion and Jet Impingement Erosion Behavior of the NiTi Coating Produced by Air Plasma Spraying, Coatings, 2018, 8(10), p 346. https://doi.org/10.3390/coatings810034610.3390/coatings8100346 ↗
21. B. Swain, P. Mallick, S.K. Bhuyan, S.S. Mohapatra, S.C. Mishra, and A. Behera, Mechanical Properties of NiTi Plasma Spray Coating, J. Therm. Spray Technol., 2020, 29(4), p 741–755. https://doi.org/10.1007/s11666-020-01017-610.1007/s11666-020-01017-6 ↗
22. B. Swain, S. Bajpai, and A. Behera, Microstructural Evolution of NITINOL and Their Species Formed by Atmospheric Plasma Spraying, Surf. Topogr. Metrol. Prop., 2019, 7(1), p 015006. https://doi.org/10.1088/2051-672X/aaf30e10.1088/2051-672X/aaf30e ↗
23. B. Swain, P. Mallick, R.K. Gupta, S.S. Mohapatra, G. Yasin, T.A. Nguyen, and A. Behera, Mechanical and Tribological Properties Evaluation of Plasma-Sprayed Shape Memory Alloy Coating, J. Alloys Compd., 2021, 863, p 158599. https://doi.org/10.1016/j.jallcom.2021.15859910.1016/j.jallcom.2021.158599 ↗
24. B. Swain, M. Priyadarshini, S.S. Mohapatra, R.K. Gupta, and A. Behera, Parametric Optimization of Atmospheric Plasma Spray Coating Using Fuzzy TOPSIS Hybrid Technique, J. Alloys Compd., 2021, 867, p 159074. https://doi.org/10.1016/j.jallcom.2021.15907410.1016/j.jallcom.2021.159074 ↗
25. A. Hojabri, Z. Kavyani, and M. Ghoranneviss, Effect of Substrate Temperatures on Structural and Morphological Properties of Nano-Crystalline Silver Thin Films Grown on Silicon Substrates, J. Inorg. Organomet. Polym. Mater., 2017, 27(1), p 53–60. https://doi.org/10.1007/s10904-016-0443-210.1007/s10904-016-0443-2 ↗
26. J. Wang, X.-T. Luo, C.-J. Li, N. Ma, and M. Takahashi, Effect of Substrate Temperature on the Microstructure and Interface Bonding Formation of Plasma Sprayed Ni20Cr Splat, Surf. Coat. Technol., 2019, 371, p 36–46. https://doi.org/10.1016/j.surfcoat.2019.01.08510.1016/j.surfcoat.2019.01.085 ↗
27. S. Yin, X. Suo, Y. Xie, W. Li, R. Lupoi, and H. Liao, Effect of Substrate Temperature on Interfacial Bonding for Cold Spray of Ni onto Cu, J. Mater. Sci., 2015, 50(22), p 7448–7457. https://doi.org/10.1007/s10853-015-9304-610.1007/s10853-015-9304-6 ↗
28. D.G. Bhosale, T.R. Prabhu, W.S. Rathod, M.A. Patil, and S.W. Rukhande, High Temperature Solid Particle Erosion Behaviour of SS 316L and Thermal Sprayed WC-Cr3C2–Ni Coatings, Wear, 2020, 462–463, p 203520. https://doi.org/10.1016/j.wear.2020.20352010.1016/j.wear.2020.203520 ↗
29. T. Bera, V. Prakash, and S.K. Acharya, Erosion Wear Behaviour of A357/Fly Ash Composites, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., 2022, 236(2), p 284–291. https://doi.org/10.1177/1350650121101916010.1177/13506501211019160 ↗
30. V. Prakash, T. Bera, and S.K. Acharya, Mechanical and Erosive Wear Behavior of Rubber Wood Particulate Reinforced Epoxy Composite, Mater. Today Proc., 2019, 19, p 223–227. https://doi.org/10.1016/j.matpr.2019.06.70810.1016/j.matpr.2019.06.708 ↗
31. S. Feng, H. Tang, S. Zhang, and H. Wang, Microstructure and Wear Resistance of Laser Clad TiB-TiC/TiNi-Ti2Ni Intermetallic Coating on Titanium Alloy, Trans. Nonferrous Met. Soc. China, 2012, 22(7), p 1667–1673. https://doi.org/10.1016/S1003-6326(11)61371-X10.1016/S1003-6326(11)61371-X ↗
32. Y.X. Leng, J.Y. Chen, P. Yang, H. Sun, and N. Huang, Structure and Properties of Passivating Titanium Oxide Films Fabricated by DC Plasma Oxidation, Surf. Coatings Technol., 2003, 166(2–3), p 176–182. https://doi.org/10.1016/S0257-8972(02)00780-610.1016/S0257-8972(02)00780-6 ↗
33. H. Singh and B.S. Sidhu, Erosion Characteristics of HVOF Developed Cr3C2-NiCr and WC-Co Coatings, Mater. Sci. Forum, 2013, 751, p 71–79. https://doi.org/10.4028/www.scientific.net/MSF.751.7110.4028/www.scientific.net/MSF.751.71 ↗
34. A. Behera and S. Aich, Characterisation and Properties of Magnetron Sputtered Nanoscale Bi-Layered Ni/Ti Thin Films and Effect of Annealing, Surf. Interface Anal., 2015, 47(8), p 805–814. https://doi.org/10.1002/sia.577710.1002/sia.5777 ↗
35. ASM International, “ASM Handbook Volume 3: Alloy Phase Diagrams,” ASM Handbook, 1998.
36. A. Patnaik, A. Satapathy, N. Chand, N.M. Barkoula, and S. Biswas, Solid Particle Erosion Wear Characteristics of Fiber and Particulate Filled Polymer Composites: A Review, Wear, 2010, 268(1–2), p 249–263. https://doi.org/10.1016/j.wear.2009.07.02110.1016/j.wear.2009.07.021 ↗
37. N. Krishnamurthy, M.S. Murali, B. Venkataraman, and P.G. Mukunda, Characterization and Solid Particle Erosion Behavior of Plasma Sprayed Alumina and Calcia-Stabilized Zirconia Coatings on Al-6061 Substrate, Wear, 2012, 274–275, p 15–27. https://doi.org/10.1016/j.wear.2011.08.00310.1016/j.wear.2011.08.003 ↗
38. R.H. Richman, A.S. Rao, and D.E. Hodgson, Cavitation Erosion of Two NiTi Alloys, Wear, 1992, 157(2), p 401–407. https://doi.org/10.1016/0043-1648(92)90076-K10.1016/0043-1648(92)90076-K ↗
39. R. Kumar, A.K. Chaubey, S. Bathula, B.B. Jha, and A. Dhar, Synthesis and Characterization of Al2O3–TiC Nano-Composite by Spark Plasma Sintering, Int. J. Refract. Met. Hard Mater., 2016, 54, p 304–308. https://doi.org/10.1016/j.ijrmhm.2015.08.00410.1016/j.ijrmhm.2015.08.004 ↗
40. A. Ghabchi, S. Sampath, K. Holmberg, and T. Varis, Damage Mechanisms and Cracking Behavior of Thermal Sprayed WC-CoCr Coating under Scratch Testing, Wear, 2014, 313(1–2), p 97–105. https://doi.org/10.1016/j.wear.2014.02.01710.1016/j.wear.2014.02.017 ↗