Microstructural Characterization and Mechanical Properties of Wire and Arc Additively Manufactured 18% Ni Maraging Steel 250
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. D.P.M. da Fonseca, A.L. Melo Feitosa, L.G. de Carvalho, R.L. Plaut, and A.F. Padilha, A Short Review on Ultra-High-Strength Maraging Steels and Future Perspectives, Mater. Res., 2021, 24, p e20200470. https://doi.org/10.1590/1980-5373-MR-2020-047010.1590/1980-5373-MR-2020-0470 ↗
2. T. Allam, K.G. Pradeep, P. Köhnen, A. Marshal, J.H. Schleifenbaum, and C. Haase, Tailoring the Nanostructure of Laser Powder Bed Fusion additively Manufactured Maraging Steel, Addit. Manuf., 2020 https://doi.org/10.1016/j.addma.2020.10156110.1016/j.addma.2020.101561 ↗
3. R. Ji, Y. Liu, Y. Zhang, B. Cai, J. Ma, and X. Li, Influence of Dielectric and Machining Parameters on the Process Performance for Electric discharge Milling of SiC Ceramic, Int. J. Adv. Manuf. Technol., 2012, 59, p 127–136. https://doi.org/10.1007/s00170-011-3493-110.1007/s00170-011-3493-1 ↗
4. W.M. Garrison, Martensitic Non-Stainless Steels: High Strength and High Alloy, Encyclopedia Mater.: Sci. Technol., 2001 https://doi.org/10.1016/B0-08-043152-6/00903-710.1016/B0-08-043152-6/00903-7 ↗
5. N. Yang, M. Shan, G. Shi, H. Guo, S. Xiong, M. Luo, D. Zhang, and M. Cui, Physicochemical State Classification of Heat-treated TC4 Samples Based on Laser-induced Breakdown Spectroscopy (LIBS), At. Spectrosc., 2024, 2024, p 324–335. https://doi.org/10.46770/AS.2024.15810.46770/AS.2024.158 ↗
6. B. Mooney and K.I. Kourousis, A Review of Factors Affecting the Mechanical Properties of Maraging Steel 300 Fabricated via Laser Powder Bed Fusion, Metals, 2020, 10, p 1273. https://doi.org/10.3390/MET1009127310.3390/MET10091273 ↗
7. G. Manohar, A. Kumar, S. Thapliyal, and R. Mamedipaka, Investigating the Performance of Aluminium-Steel Bimetallic Structure Fabricated Through Wire and Arc Additive Manufacturing with Interlayer Approach, Structures, 2025 https://doi.org/10.1016/j.istruc.2025.10830410.1016/j.istruc.2025.108304 ↗
8. Y. Chi, Z. Dong, M. Cui, C. Shan, Y. Xiong, D. Zhang, and M. Luo, Comparative Study on Machinability and Surface Integrity of γ-TiAl Alloy in Laser Assisted Milling, J. Mater. Res. Technol., 2024, 33, p 3743–3755. https://doi.org/10.1016/j.jmrt.2024.10.02810.1016/j.jmrt.2024.10.028 ↗
9. Y. Kok, X.P. Tan, P. Wang, M.L.S. Nai, N.H. Loh, E. Liu, and S.B. Tor, Anisotropy and Heterogeneity of Microstructure and Mechanical Properties in Metal Additive Manufacturing: A Critical Review, Mater. Des., 2018, 139, p 565–586. https://doi.org/10.1016/j.matdes.2017.11.02110.1016/j.matdes.2017.11.021 ↗
10. G. Manohar and V. Reddy, From Fabrication to Prediction: Unraveling the Tensile strength of Al/SiN Composites Through Machine Learning, Int. J. Interactive Design Manufact. (IJIDeM), 2025 https://doi.org/10.1007/s12008-025-02274-x10.1007/s12008-025-02274-x ↗
11. F.F. Conde, J.D. Escobar, J.P. Oliveira, A.L. Jardini, W.W. Bose Filho, and J.A. Avila, Austenite Reversion Kinetics and Stability During Tempering of an Additively Manufactured Maraging 300 Steel, Addit. Manuf., 2019 https://doi.org/10.1016/j.addma.2019.10080410.1016/j.addma.2019.100804 ↗
12. Z. Fang, S. Xu, Z. Wang, and Y. Sun, Effect of Solution and Aging Treatment on the Microstructure and Properties of LAZ931 Mg-Li Alloy by Friction Stir Processing, Metals, 2025 https://doi.org/10.3390/met1503031410.3390/met15030314 ↗
13. G. Manohar, A. Kumar, M.V.N.V. Satyanarayana, P.R. Mattli, and A. Bhowmik, Enhanced Performance of AA7075/SiC/ZrC Hybrid Composite Through Microwave Assisted Powder Metallurgy Techniques, J. Mater. Eng. Perform., 2025, 34, p 4336–4349. https://doi.org/10.1007/s11665-024-09405-710.1007/s11665-024-09405-7 ↗
14. L. Guo, L. Zhang, J. Andersson, and O. Ojo, Additive Manufacturing of 18% Nickel Maraging Steels: DEFECT, structure and Mechanical Properties: A Review, J. Mater. Sci. Technol., 2022, 120, p 227–252. https://doi.org/10.1016/j.jmst.2021.10.05610.1016/j.jmst.2021.10.056 ↗
15. K. Venkateswara Reddy and M. Guttikonda, Dynamic Mechanical and Microstructural Analysis of Graphite-Reinforced Al6061 Alloy Processed by Friction Stir Processing, J. Adhes. Sci. Technol., 2025 https://doi.org/10.1080/01694243.2025.250875210.1080/01694243.2025.2508752 ↗
16. K. Kempen, L. Thijs, J. Van Humbeeck, and J.P. Kruth, Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting, Phys. Procedia, 2012, 39, p 439–446. https://doi.org/10.1016/j.phpro.2012.10.05910.1016/j.phpro.2012.10.059 ↗
17. L. Liao, Y. Cheng, S. Dai, M.A. Khan, H. Zhang, and F. Li, Effect of Cold-Rolling and Annealing Temperature on Microstructure, Texture Evolution and Mechanical Properties of FeCoCrNiMn High-Entropy Alloy, J. Mater. Res. Technol., 2024, 33, p 683–697. https://doi.org/10.1016/j.jmrt.2024.09.12410.1016/j.jmrt.2024.09.124 ↗
18. C. Tan, K. Zhou, W. Ma, P. Zhang, M. Liu, and T. Kuang, Microstructural Evolution, Nanoprecipitation Behavior and Mechanical Properties of Selective Laser Melted High-Performance Grade 300 Maraging Steel, Mater. Des., 2017, 134, p 23–34. https://doi.org/10.1016/J.MATDES.2017.08.02610.1016/J.MATDES.2017.08.026 ↗
19. X. Guo, D. Tian, C. Li, X. Li, W. Li, M. Cao, F. Zhang, and B. Wang, Optimization for the Process Parameters of Nickel-Titanium Nitride Composites Fabricated Via jet Pulse Electrodeposition, Nanomaterials, 2024 https://doi.org/10.3390/nano1424203410.3390/nano14242034 ↗
20. K.V. Reddy, G. Manohar, and C.R. Reddy, Microstructural, Mechanical and Damping Analysis of Al/Gr Composites Produced Via Friction stir Processing: Effect of Rotational Speed, Canadian Metall. Quarterly, 2025 https://doi.org/10.1080/00084433.2025.250810510.1080/00084433.2025.2508105 ↗
21. G. Manohar, Machine Learning Approaches for Tensile Strength Prediction in Al/B4C Metal Matrix Composites: A Comparative Analysis of Neural Networks and Ensemble Methods, Int. J. n Interactive Design Manufact. (IJIDeM), 2025 https://doi.org/10.1007/s12008-025-02347-x10.1007/s12008-025-02347-x ↗
22. P. Bajaj, A. Hariharan, A. Kini, P. Kürnsteiner, D. Raabe, and E.A. Jägle, Steels in Additive Manufacturing: A Review of Their Microstructure and Properties, Mater. Sci. Eng. A, 2020, 772, p 138633. https://doi.org/10.1016/J.MSEA.2019.13863310.1016/J.MSEA.2019.138633 ↗
23. Z. Fang, S. Xu, R. Cao, M. Jiao, K. Liu, Q. Diao, S. Guan, and Y. Jia, Interfacial Adsorption Mechanisms of Arginine, Glutamic Acid, Aspartic Acid, and Valine on Magnesium and Magnesium Alloy surfaces: A First-Principles Investigation, Coatings, 2025 https://doi.org/10.3390/coatings1505058610.3390/coatings15050586 ↗
24. X. Xu, S. Ganguly, J. Ding, S. Guo, S. Williams, and F. Martina, Microstructural Evolution and Mechanical Properties of Maraging Steel Produced by Wire + Arc Additive Manufacture Process, Mater Charact, 2018, 143, p 152–162. https://doi.org/10.1016/J.MATCHAR.2017.12.00210.1016/J.MATCHAR.2017.12.002 ↗
25. G. Yang, F. Deng, S. Zhou, B. Wu, and L. Qin, Microstructure and Mechanical Properties of a Novel Cu-Reinforced Maraging Steel for Wire Arc Additive Manufacturing, Mater. Sci. Eng. A, 2021 https://doi.org/10.1016/j.msea.2021.14189410.1016/j.msea.2021.141894 ↗
26. V.S.S. Venkatesh, G. Manohar, P.R. Vundavilli, M.M. Mahapatra, A. Goyal, and A. Bhowmik, Extraction of Kaolin and Tribo Informative Analysis of the Al-Kaolin Composite Through Machine Learning Approaches, Sci. Rep., 2025, 15, p 13370. https://doi.org/10.1038/s41598-025-97782-x10.1038/s41598-025-97782-x ↗
27. J. Fu, L. Zhang, H. Wang, Y. Zhao, X. Yang, J. Zhang, Z. Chen, Y. Cao, B. Liu, and X. Li, Microstructure and Mechanical Properties of WC-12Co Cemented Carbide Fabricated by Laser Powder Bed Fusion on a WC-20Co Cemented Carbide Substrate, J. Mater. Res. Technol., 2024, 30, p 9093–9101. https://doi.org/10.1016/j.jmrt.2024.05.26610.1016/j.jmrt.2024.05.266 ↗
28. X. Xu, J. Ding, S. Ganguly, C. Diao, and S. Williams, Preliminary Investigation of Building Strategies of Maraging Steel Bulk Material Using Wire + Arc Additive Manufacture, J. Mater. Eng. Perform., 2019, 28, p 594–600. https://doi.org/10.1007/S11665-018-3521-5/METRICS10.1007/S11665-018-3521-5/METRICS ↗
29. L. Guo, L. Zhang, J. Andersson, and O. Ojo, Solidification structures and Phases in Wire Arc Additive Manufactured C250 Maraging Steel, Mater. Sci. Technol., 2023, 39, p 582–590. https://doi.org/10.1080/02670836.2022.212857710.1080/02670836.2022.2128577 ↗
30. R. Li, H. Ma, R. Wang, H. Song, X. Zhou, L. Wang, H. Zhang, K. Zeng, and C. Xia, Application of Unsupervised Learning METHODS Based on Video Data for Real-Time Anomaly Detection in Wire Arc Additive Manufacturing, J. Manuf. Process., 2025, 143, p 37–55. https://doi.org/10.1016/j.jmapro.2025.03.11310.1016/j.jmapro.2025.03.113 ↗
31. X. Chen, W. Wang, M. Wang, G. Huang, J. Zhang, and F. Pan, Optimizing the Strength and Ductility of Pure Aluminum Laminate Via Tailoring Coarse/Ultrafine Grain Layer Thickness Ratio, J. Mater. Res. Technol., 2023, 27, p 7394–7406. https://doi.org/10.1016/j.jmrt.2023.11.17010.1016/j.jmrt.2023.11.170 ↗
32. J. Zhang, J. Fan, L. Duan, W. Chen, D. Yang, and K. Wang, Effect of Heat Treatment on the Microstructure and Mechanical Properties of 18Ni 300 Maraging Steel Manufactured by Wire + Arc Additive Manufacturing, Virt. Phys. Prototyping, 2024 https://doi.org/10.1080/17452759.2024.239700710.1080/17452759.2024.2397007 ↗
33. C. Kan, L. Zhao, Y. Cao, C. Ma, Y. Peng, and Z. Tian, Microstructure Evolution and Strengthening Behavior of Maraging Steel Fabricated by Wire Arc Additive Manufacturing at Different Heat Treatment Processes, Mater. Sci. Eng. A, 2024, 909, p 146804. https://doi.org/10.1016/J.MSEA.2024.14680410.1016/J.MSEA.2024.146804 ↗
34. X. Qu, X. Li, L. Zhang, D. Yi, J. Wang, C. Wen, Z. Zhao, X. Gu, Y. Lin, B. Liu, Y. Cao, and P. Bai, Effect of Construction Angles on the Microstructure and Mechanical Properties of LPBF-Fabricated 15–5 PH Stainless Steel, Mater. Sci. Eng. A, 2024 https://doi.org/10.1016/j.msea.2024.14642310.1016/j.msea.2024.146423 ↗
35. Y. Zheng, Z. Tian, Z. Yu, J. Chen, T. Jiang, L. Kong, H. Lu, D. Wang and J. Luo, A Thermal History-Based Approach to Predict Mechanical Properties of Plasma arc Additively Manufactured IN625 Thin-Wall, J. Manuf. Process., 2025, 140, p 91–107. https://doi.org/10.1016/j.jmapro.2025.02.04310.1016/j.jmapro.2025.02.043 ↗
36. W. Yu, X. Chong, Y. Liang, X. Gao, Y. Wei, S.L. Shang, M. Gan, Y. Lin, A. Zhang, H. Wu, L. Chen, J. Feng, Z.K. Liu, and H. Song, Discovering Novel γ-γ′ Pt-Al Superalloys Via Lattice Stability in Pt3Al Induced by Local Atomic Environment Distortion, Acta Mater., 2024 https://doi.org/10.1016/j.actamat.2024.12041310.1016/j.actamat.2024.120413 ↗
37. X. Chen, D. Xia, Q. Jia, G. Huang, W. Wang, J. Zhang, H.N. Han, and F. Pan, Significantly Improve the Strength and Ductility of AZ31 Mg Alloy by Introducing Pure Ti, J. Mater. Sci. Technol., 2024, 185, p 69–82. https://doi.org/10.1016/j.jmst.2023.11.00810.1016/j.jmst.2023.11.008 ↗
38. J. Liu, J. Xu, K.W. Paik, P. He, and S. Zhang, In-Situ Isothermal Aging TEM Analysis of a Micro Cu/ENIG/Sn Solder Joint for Flexible Interconnects, J. Mater. Sci. Technol., 2024, 169, p 42–52. https://doi.org/10.1016/j.jmst.2023.06.02010.1016/j.jmst.2023.06.020 ↗
39. X. Xu, Y. Hao, R. Dong, H. Hou, and Y. Zhao, Effect of Undercooling on Microstructure Evolution of Cu Based Alloys, J. Alloys Compd., 2023 https://doi.org/10.1016/j.jallcom.2022.16799810.1016/j.jallcom.2022.167998 ↗
40. S.I. Evans, J. Wang, J. Qin, Y. He, P. Shepherd, and J. Ding, A Review of WAAM for Steel Construction – Manufacturing, Material and Geometric Properties, Design, and Future Directions, Structures, 2022, 44, p 1506–1522. https://doi.org/10.1016/j.istruc.2022.08.08410.1016/j.istruc.2022.08.084 ↗
41. P. Gong, B.P. Wynne, A.J. Knowles, A. Turk, L. Ma, E.I. Galindo-Nava, and W.M. Rainforth, Effect of Ageing on the Microstructural Evolution in a New Design of Maraging Steels with carbon, Acta Mater., 2020, 196, p 101–121. https://doi.org/10.1016/j.actamat.2020.06.02910.1016/j.actamat.2020.06.029 ↗
42. X. Xu, S. Ganguly, J. Ding, P. Dirisu, F. Martina, X. Liu, and S.W. Williams, Improving Mechanical Properties of Wire Plus arc Additively Manufactured Maraging Steel Through Plastic Deformation Enhanced Aging Response, Mater. Sci. Eng. A, 2019, 747, p 111–118. https://doi.org/10.1016/j.msea.2018.12.11410.1016/j.msea.2018.12.114 ↗
43. V.S.S. Venkatesh, R.N. Rao, G. Manohar, and S.N. Singh, Tribo-Informative Analysis of Spark Plasma Sintered Al-SiC-HAp Hybrid Composite Through Machine Learning Techniques, Arab. J. Sci. Eng., 2024 https://doi.org/10.1007/s13369-024-09835-410.1007/s13369-024-09835-4 ↗
44. M. Niu, G. Zhou, W. Wang, M.B. Shahzad, Y. Shan, and K. Yang, Precipitate Evolution and Strengthening Behavior During Aging Process in a 2.5 GPa Grade Maraging Steel, Acta Mater., 2019, 179, p 296–307. https://doi.org/10.1016/j.actamat.2019.08.04210.1016/j.actamat.2019.08.042 ↗
45. B. Parvaresh, R. Miresmaeili, and M. Yazdizadeh, Characterization of Wire Arc Additive Manufactured Products: A Comparison Between as-Deposited and Inter-Layer Cold Worked Specimens, J. Manuf. Process., 2020, 57, p 61–71. https://doi.org/10.1016/j.jmapro.2020.05.05310.1016/j.jmapro.2020.05.053 ↗
46. B. Mooney, K.I. Kourousis, and R. Raghavendra, Plastic Anisotropy of Additively Manufactured Maraging Steel: Influence of the Build Orientation and Heat Treatments, Addit. Manuf., 2019, 25, p 19–31. https://doi.org/10.1016/j.addma.2018.10.03210.1016/j.addma.2018.10.032 ↗
47. K. Kempen, E. Yasa, L. Thijs, J.P. Kruth, and J. Van Humbeeck, Microstructure and Mechanical Properties of Selective Laser Melted 18Ni-300 Steel, Phys. Procedia, 2011, 12, p 255–263. https://doi.org/10.1016/J.PHPRO.2011.03.03310.1016/J.PHPRO.2011.03.033 ↗
48. W. Xiaowei, Y. Dongqing, H. Yong, Z. Qi, F. Jikang, and W. Kehong, Microstructure and Mechanical Properties of as-Deposited and Heat-Treated 18Ni (350) Maraging Steel Fabricated by Gas Metal Arc-Based Wire and arc Additive Manufacturing, J. Mater. Eng. Perform., 2021, 30, p 6972–6981. https://doi.org/10.1007/s11665-021-06102-710.1007/s11665-021-06102-7 ↗
49. R. Ji, Q. Zhao, L. Zhao, Y. Liu, H. Jin, L. Wang, L. Wu, and Z. Xu, Study on High Wear Resistance Surface Texture of Electrical Discharge Machining Based on a New Water-In-Oil Working Fluid, Tribol. Int., 2023 https://doi.org/10.1016/j.triboint.2023.10821810.1016/j.triboint.2023.108218 ↗
50. Y. Bai, J. Zhou, K. Zhong, C. Zhao, K. Yun, and L. Qi, Study on Process Parameters of Liquid-Solid Infiltration Extrusion of Continuous Carbon Fiber-Reinforced Aluminum Matrix Composites, Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 2024 https://doi.org/10.1007/S11663-024-03283-Z/METRICS10.1007/S11663-024-03283-Z/METRICS ↗
51. Y. Zhao, Stability of Phase Boundary Between L12-Ni3Al Phases: A Phase Field Study, Intermetallics, 2022 https://doi.org/10.1016/j.intermet.2022.10752810.1016/j.intermet.2022.107528 ↗
52. C. Cambon, I. Bendaoud, S. Rouquette, and F. Soulié, A Waam Benchmark: From Process Parameters to Thermal Effects on Weld Pool Shape, Microstructure and Residual Stresses, Mater. Today Commun., 2022, 33, p 104235. https://doi.org/10.1016/j.mtcomm.2022.10423510.1016/j.mtcomm.2022.104235 ↗
53. H. Luo, Z. Ruan, T. Fan, Y. Zhang, T. Hu, and H.G. Yan, First-Principles Investigation of Plane FAULTS and thermodynamics in BCC (TiZrHf)1-xMx (M=Nb, Mo, Ta) Medium Entropy Alloys, Mater. Chem. Phys., 2025 https://doi.org/10.1016/j.matchemphys.2025.13049810.1016/j.matchemphys.2025.130498 ↗
54. C. Su, X. Chen, C. Gao, and Y. Wang, Effect of Heat Input on Microstructure and Mechanical Properties of Al-Mg Alloys Fabricated by WAAM, Appl. Surf. Sci., 2019, 486, p 431–440. https://doi.org/10.1016/j.apsusc.2019.04.25510.1016/j.apsusc.2019.04.255 ↗
55. S. Xiong, N. Yang, H. Guan, G. Shi, M. Luo, Y. Deguchi, and M. Cui, Combination of Plasma Acoustic Emission Signal and Laser-Induced Breakdown Spectroscopy for Accurate Classification of Steel, Anal. Chim. Acta, 2025 https://doi.org/10.1016/j.aca.2024.34349610.1016/j.aca.2024.343496 ↗
56. X. Long, Y. Guo, Y. Su, K.S. Siow, and C. Chen, Unveiling the Damage Evolution of SAC305 During Fatigue by Entropy Generation, Int. J. Mech. Sci., 2023 https://doi.org/10.1016/j.ijmecsci.2022.10808710.1016/j.ijmecsci.2022.108087 ↗
57. R. Ji, Y. Liu, Y. Zhang, and F. Wang, Machining Performance of Silicon Carbide Ceramic in End Electric Discharge Milling, Int. J. Refract. Met. Hard Mater., 2011, 29, p 117–122. https://doi.org/10.1016/j.ijrmhm.2010.09.00110.1016/j.ijrmhm.2010.09.001 ↗
58. D. Çakan, O. Ertuğrul, and M.S. Yılmaz, Aging Heat Treatment of Additively Manufactured Maraging Steels in Nitrogen Containing Atmospheres, Mater. Today Commun., 2023, 35, p 106347.10.1016/j.mtcomm.2023.106347 ↗
59. R.K. Saride, S. Vajjala, B. Patel, S. Kumar, R. Kumar, L. Pappula, and J.R. Ginuga, Welding Studies and Characterisation of Additively Manufactured LPBF Maraging Steel, Int. J. Mech. Eng. Appl., 2023, 11, p 100–112. https://doi.org/10.11648/j.ijmea.20231105.1110.11648/j.ijmea.20231105.11 ↗
60. H. Li, Q. Yang, J. Yan, B. Liu, and Y. Liu, Microstructural Evolution and Mechanical Properties of Maraging Steel by Additive Manufacturing, Mater. Sci. Eng. A, 2024, 915, p 147201. https://doi.org/10.1016/J.MSEA.2024.14720110.1016/J.MSEA.2024.147201 ↗