Advancements in Photocurable 3D Printing Technologies for Ceramic Materials
Source abstract
Abstract
Ceramic materials are widely used in various industries owing to their excellent performance characteristics. Photocuring 3D printing technology has received significant attention owing to its fast curing speed and high spatial resolution. However, transforming photocurable materials into high-performance ceramics remains a significant challenge. This paper provides an overview of the main photocuring 3D printing technologies and analyzes modifications in two types of slurry systems. Various methods are used to improve the stability and rheology of ceramic particle-resin mixtures and optimize the precursor polymer system to produce high-precision, high-yield, lightweight, and complex ceramic components. Overall, this paper highlights recent advancements in functional ceramics and indicates the potential of photocuring 3D printing technology to produce advanced ceramics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Augmented Reality Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Z. Chen, Z. Li, J. Li, C. Liu, C. Lao, Y. Fu, C. Liu, Y. Li, P. Wang, and Y. He, 3D Printing of Ceramics: A Review, J. Eur. Ceram. Soc., 2019, 39(4), p 661–687.10.1016/j.jeurceramsoc.2018.11.013 ↗
2. H. Xing, B. Zou, Q. Lai, C. Huang, Q. Chen, X. Fu, and Z. Shi, Preparation and Characterization of UV Curable Al2O3 Suspensions Applying for Stereolithography 3D Printing Ceramic Microcomponent, Powder Technol., 2018, 338, p 153–161.10.1016/j.powtec.2018.07.023 ↗
3. M. Dadkhah, J.-M. Tulliani, A. Saboori, and L. Iuliano, Additive Manufacturing of Ceramics: Advances, Challenges, and Outlook, J. Eur. Ceram. Soc., 2023, 43(15), p 6635–6664.10.1016/j.jeurceramsoc.2023.07.033 ↗
4. R.Y. Su, J.Y. Chen, X.Q. Zhang, W.Q. Wang, R.J. He, H. Xu, and Y. Li, 3D Printed SiOC Architecture Towards Terahertz Electromagnetic Interference Shielding and Absorption, Chem. Eng. J., 2024, 498, 155689.
5. H. Quan, T. Zhang, H. Xu, S. Luo, J. Nie, and X. Zhu, Photo-Curing 3D Printing Technique and its Challenges, Bioact. Mater., 2020, 5(1), p 110–115.
6. X. Wu, J. Teng, X. Ji, C. Xu, D. Ma, S. Sui, and Z. Zhang, Research Progress of the Defects and Innovations of Ceramic Vat Photopolymerization, Addit. Manuf., 2023, 65(5), 103441.
7. R. Melentiev, M. Melentieva, and N. Yu, Top 10 Directions in Lithography 3D Printing, Bioprinting, 2024, 40, e00343.10.1016/j.bprint.2024.e00343 ↗
8. Y. Shi, Y. Cao, Y. Wang, and L. Huang, Influence of SLA Rapid Prototyping Process Parameters on the Forming Precision, In: Proceedings of the 6th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2016), Atlantis Press, 2016, p 1448–145210.2991/mcei-16.2016.294 ↗
9. Y. Wang, Y. Zhang, S. Song, R. Chen, Y. Liu, and Y. Duan, Research on Scanning Light Curing Forming and Degreasing Sintering Process of Zirconia Ceramics, J. Inorg. Mater., 2022, 37(3), p 303–309. ((in Chinese))10.15541/jim20210569 ↗
10. Y. Lu, X. Du, Y. Duan, S. Li, and Y. Huang, Effect of Light-Curing 3D Printing Molding Process Parameters on Spline Performance, Mod. Plast. Process. Appl., 2022, 34, p 13–16. ((in Chinese))
11. O. Tuteski and A. Kočov, Tensile Strength and Dimensional Variances in Parts Manufactured by SLA 3D Printing, Ind. 4.0, 2021, 6(4), p 143–149.
12. M. Kazemi and A. Rahimi, Stereolithography Process Optimization for Tensile Strength Improvement of Products, Rapid Prototyp. J., 2018, 24(4), p 688–697.10.1108/RPJ-05-2015-0049 ↗
13. Li. Siqing, G. Xiaofeng, Z. Weijie, C. Jiangning, W. Tan, and G. Yingzhao, Multi-Objective Optimization of SLA Variable Light Spot Forming Process Based on Neural Network, Plast. Ind., 2023, 51(11), p 95–101. ((in Chinese))
14. Xu. Xin, W. Yihuai, and Z. Rong, Design of Edge Cutting Scheme for DLP-3D Printing, Plast. Ind., 2020, 48(3), p 89–93. ((in Chinese))
15. A. Bertsch, S. Zissi, J.Y. Jézéquel, S. Corbel, and J.C. André, Microstereophotolithography Using A Liquid Crystal Display as Dynamic Mask-Generator, Microsyst. Technol., 1997, 3(2), p 42–47.10.1007/s005420050053 ↗
16. J.R. Tumbleston, D. Shirvanyants, N. Ermoshkin, R. Janusziewicz, A.R. Johnson, D. Kelly, K. Chen, R. Pinschmidt, J.P. Rolland, A. Ermoshkin, E.T. Samulski, and J.M. DeSimone, Continuous Liquid Interface Production of 3D Objects, Sci., 2015, 347(6228), p 1349–1352.10.1126/science.aaa2397 ↗
17. B.E. Kelly, I. Bhattacharya, H. Heidari, M. Shusteff, C.M. Spadaccini, and H.K. Taylor, Volumetric Additive Manufacturing Via Tomographic Reconstruction, Sci., 2019, 363(6431), p 1075–1079.10.1126/science.aau7114 ↗
18. M. Regehly, Y. Garmshausen, M. Reuter, N.F. König, E. Israel, D.P. Kelly, C.Y. Chou, K. Koch, B. Asfari, and S. Hecht, Xolography for Linear Volumetric 3D Printing, Nat., 2020, 588(7839), p 620–624.10.1038/s41586-020-3029-7 ↗
19. Q. Ge, Z. Li, Z. Wang, K. Kowsari, W. Zhang, X. He, J. Zhou, and N.X. Fang, Projection Micro Stereolithography Based 3D Printing and its Applications, Int. J. Extreme Manuf., 2020, 2(2), 022004.
20. R. Su, J. Chen, X. Zhang, W. Wang, Y. Li, R. He, and D. Fang, 3D-Printed Micro/Nano-Scaled Mechanical Metamaterials: Fundamentals, Technologies, Progress, Applications, and Challenges, Small, 2023, 19(29), p 2206391.10.1002/smll.202206391 ↗
21. Z. Huang, G. Shao, and L. Li, Micro/nano Functional Devices Fabricated by Additive Manufacturing, Prog. Mater. Sci., 2023, 131, 101020.10.1016/j.pmatsci.2022.101020 ↗
22. W. Chu, Y. Tan, P. Wang, J. Xu, W. Li, J. Qi, and Y. Cheng, Centimeter-Height 3D Printing With Femtosecond Laser Two-Photon Polymerization, Adv. Mater. Technol., 2018, 3(5), p 1700396.10.1002/admt.201700396 ↗
23. S.K. Saha, D. Wang, V.H. Nguyen, Y. Chang, J.S. Oakdale, and S.C. Chen, Scalable Submicrometer Additive Manufacturing, Sci., 2019, 366(6461), p 105–109.10.1126/science.aax8760 ↗
24. Y. Fujishiro, T. Furukawa, and S. Maruo, Simple Autofocusing Method by Image Processing Using Transmission Images for Large-Scale Two-Photon Lithography, Opt. Express, 2020, 28(8), p 12342–12351.10.1364/OE.390486 ↗
25. P. Somers, Z. Liang, J.E. Johnson, B.W. Boudouris, L. Pan, and X. Xu, Rapid, Continuous Projection Multi-Photon 3D Printing Enabled by Spatiotemporal Focusing of Femtosecond Pulses, Light Sci. Appl., 2021, 10(1), p 199.10.1038/s41377-021-00645-z ↗
26. F. Jin, J. Liu, Y.Y. Zhao, X.Z. Dong, M.L. Zheng, and X.M. Duan, λ/30 Inorganic Features Achieved by Multi-Photon 3D Lithography, Nat. Commun., 2022, 13(1), p 1357.10.1038/s41467-022-29036-7 ↗
27. V. Hahn, P. Kiefer, T. Frenzel, J. Qu, E. Blasco, C. Barner-Kowollik, and M. Wegener, Rapid Assembly of Small Materials Building Blocks (Voxels) Into Large Functional 3D Metamaterials, Adv. Funct. Mater., 2020, 30(26), p 1907795.10.1002/adfm.201907795 ↗
28. F. Zhang, L. Zhu, Z. Li, S. Wang, J. Shi, W. Tang, N. Li, and J. Yang, The Recent Development of Vat Photopolymerization: A Review, Addit. Manuf., 2021, 48, 102423.
29. B. Inserra, B. Coppola, L. Montanaro, J.M. Tulliani, and P. Palmero, Preparation and Characterization of Ce-ZrO2/Al2O3 Composites by DLP-Based Stereolithography, J. Eur. Ceram. Soc., 2023, 43(7), p 2907–2916.10.1016/j.jeurceramsoc.2022.08.037 ↗
30. I.L. de Camargo, M.M. Morais, C.A. Fortulan, and M.C. Branciforti, A Review on the Rheological Behavior and Formulations of Ceramic suspensions for Vat Photopolymerization, Ceram. Int., 2021, 47(9), p 11906–11921.10.1016/j.ceramint.2021.01.031 ↗
31. X. Li, H. Zhong, J. Zhang, Y. Duan, H. Bai, J. Li, and D. Jiang, Dispersion and Properties of Zirconia Suspensions for Stereolithography, Int. J. Appl. Ceram. Technol., 2020, 17(1), p 239–247.10.1111/ijac.13321 ↗
32. J. Sun, J. Binner, and J. Bai, 3D Printing of Zirconia via Digital Light Processing: Optimization of Slurry and Debinding Process, J. Eur. Ceram. Soc., 2020, 40(15), p 5837–5844.10.1016/j.jeurceramsoc.2020.05.079 ↗
33. L. Zhang, Y. Zeng, H. Yao, Z. Shi, and J. Chen, Fabrication and Characterization of ZrO2(3Y)/Al2O3 Micro-Ceramic Gears With High Performance by Vat Photopolymerization 3D Printing, Ceram. Int., 2024, 50(3), p 5187–5197.10.1016/j.ceramint.2023.11.264 ↗
34. D. Komissarenko, S. Roland, B.S.M. Seeber, T. Graule, and G. Blugan, DLP 3D Printing of High Strength Semi-Translucent Zirconia Ceramics with Relatively Low-Loaded UV-Curable Formulations, Ceram. Int., 2023, 49(2), p 21008–21016.10.1016/j.ceramint.2023.03.236 ↗
35. J. Sun, J. Binner, and J. Bai, Effect of Surface Treatment on the Dispersion of Nano Zirconia Particles in Non-Aqueous Suspensions for Stereolithography, J. Eur. Ceram. Soc., 2019, 39(4), p 1660–1667.10.1016/j.jeurceramsoc.2018.10.024 ↗
36. Y. Liu, L. Cheng, H. Li, Q. Li, Y. Shi, F. Liu, Q. Wu, and S. Liu, Formation Mechanism of Stereolithography of Si3N4 Slurry Using Silane Coupling Agent as Modifier and Dispersant, Ceram. Int., 2020, 46(10), p 14583–14590.10.1016/j.ceramint.2020.02.258 ↗
37. L. Lin, H. Wu, P. Ni, Y. Chen, Z. Huang, Y. Li, K. Lin, P. Sheng, and S. Wu, Additive Manufacturing of Complex-Shaped and High-Performance Aluminum Nitride-Based Components for Thermal Management, Addit. Manuf., 2022, 52, 102671.
38. H. Chen, G. Nie, Y. Li, X. Zong, and S. Wu, Improving Relative Density and Mechanical Strength of Lunar Regolith Structures Via DLP-Stereolithography Integrated with Powder Surface Modification Process, Ceram. Int., 2022, 48(18), p 26874–26883.10.1016/j.ceramint.2022.05.390 ↗
39. Y. Jiao, G. Fan, Y. Chen, W. Yu, F. Gong, G. Liu, J. Bai, P. Zhou, D. Zhang, and L. Sun, Development and Optimization of PZT Suspensions with High Solid Loading and Low Viscosity for Stereolithography-Based Additive Manufacturing, Ceram. Int., 2024, 50(2), p 3325–3333.10.1016/j.ceramint.2023.11.078 ↗
40. H. Gong, C. Wang, H. Wu, X. Luo, J. Liang, N. Li, S. Chen, and Y. Long, Investigating the Correlation and Composition of Organic Components in ZrO2-based Slurry on Printability Improvement and Defect Suppression of Vat Photopolymerization, Mater. Today Commun., 2023, 34, 105149.
41. L. Lin, H. Wu, Y. Xu, K. Lin, W. Zou, and S. Wu, Fabrication of Dense Aluminum Nitride Ceramics Via Digital Light Processing-Based Stereolithography, Mater. Chem. Phys., 2020, 249, 122969.
42. S.P. Gentry and J.W. Halloran, Light Scattering in Absorbing Ceramic Suspensions: Effect on the Width and Depth of Photopolymerized Features, J. Eur. Ceram. Soc., 2015, 35(6), p 1895–1904.10.1016/j.jeurceramsoc.2014.12.006 ↗
43. C. Hu, Y. Chen, T. Yang, H. Liu, X. Huang, Y. Huo, Z. Jia, H. Wang, L. Hu, H. Sun, C. Wang, B. Gang, and H. Wang, Effect of SiC Powder on the Properties of SiC Slurry for Stereolithography, Ceram. Int., 2021, 47(9), p 12442–12449.10.1016/j.ceramint.2021.01.101 ↗
44. S. Huang, Y. Li, P. Yang, P. Sheng, J. Ou, T. Ning, and S. Wu, Cure Behaviour and Mechanical Properties of Si3N4 Ceramics with Bimodal Particle Size Distribution Prepared Using Digital Light Processing, Ceram. Int., 2023, 49(8), p 12166–12172.10.1016/j.ceramint.2022.12.068 ↗
45. L. Lin, H. Wu, Y. Li, J. Wang, and S. Wu, Effect of Particle Size on Rheology, Curing Kinetics, and Corresponding Mechanical and Thermal Properties of Aluminum Nitride (AlN) Ceramic by Digital Light Processing (DLP)-Based Vat Photopolymerization, J. Eur. Ceram. Soc., 2024, 44(1), p 184–192.10.1016/j.jeurceramsoc.2023.08.048 ↗
46. Y. Wu, Q. Cao, Y. Wang, Y. Liu, X. Xu, P. Liu, X. Li, X. Zhu, and X. Zhang, Optimized Fabrication of DLP-based 3D Printing Calcium Phosphate Ceramics With High-Precision and Low-Defect to Induce Calvarial Defect Regeneration, Mater. Des., 2023, 233, 112230.
47. S.P. Gentry and J.W. Halloran, Absorption Effects in Photopolymerized Ceramic Suspensions, J. Eur. Ceram. Soc., 2013, 33(10), p 1989–1994.10.1016/j.jeurceramsoc.2013.03.004 ↗
48. Y. Li, S. Huang, S. Wang, X. Zhang, Y. Wang, B. Lu, Y. Luo, F. He, W. Liu, and S. Wu, Research on the Effects of Surface Modification of Ceramic Powder on Cure Performance During Digital Light Processing (DLP), Ceram. Int., 2022, 48(3), p 3652–3658.10.1016/j.ceramint.2021.10.146 ↗
49. J. Rauchenecker, J. Rabitsch, M. Schwentenwein, and T. Konegger, Additive Manufacturing of Aluminum Nitride Ceramics with High Thermal Conductivity Via Digital Light Processing, Open Ceram., 2022, 9, 100215.
50. S. Wei, G. Han, X. Zhang, J. Sun, J. Zhang, W. Wang, W. Zhang, L. Yang, and J. Li, Preparation of High Performance Dense Al2O3 Ceramics by Digital Light Processing 3D Printing Technology, Ceram. Int., 2024, 50(1), p 2083–2095.10.1016/j.ceramint.2023.10.316 ↗
51. C.L. Liu, Q. Du, H. Zhou, S. Chen, J.M. Wu, G. Zhang, and Y.S. Shi, 3D Printing of Lead Zirconate Titanate Piezoelectric Ceramics Via Digital Light Processing (DLP), Ceram. Int., 2023, 49(17), p 28492–28499.10.1016/j.ceramint.2023.06.106 ↗
52. B. Zhang, F. Xing, L. Chen, C. Zhou, X. Gui, Z. Su, S. Fan, Z. Zhou, Q. Jiang, L. Zhao, M. Liu, Y. Fan, and X. Zhang, DLP Fabrication of Customized Porous Bioceramics with Osteoinduction Ability for Remote Isolation Bone Regeneration, Biomater. Adv., 2023, 145, 213261.10.1016/j.bioadv.2022.213261 ↗
53. X. Li, H. Zhang, and H. Zhang, Fabrication of β-TCP/Akermanite Composite Scaffold Via DLP and In-Situ Modification of Micro-Nano Surface Morphology for Bone Repair, Ceram. Int., 2024, 50(2), p 2659–2669.10.1016/j.ceramint.2023.10.276 ↗
54. B. Li, S. Wang, J. Chen, Z. Li, W. Shan, X. Wang, B. Jiang, J. He, and L. Zhang, 3D Printing of LuAG: Ce Transparent Ceramics for Laser-Driven Lighting, Ceram. Int., 2023, 49(23), p 38708–38716.10.1016/j.ceramint.2023.09.207 ↗
55. R. Su, J. Chen, X. Zhang, W. Wang, R. He, and Y. Li, Photocured Ti3C2Tx MXene/SiOC Ceramic Composite for Electromagnetic Interference Shielding in the Terahertz Band, J. Mater. Chem. A., 2024, 12, p 14479–14490.10.1039/D4TA02495H ↗
56. A. Vyatskikh, R.C. Ng, B. Edwards, R.M. Briggs, and J.R. Greer, Additive Manufacturing of High-Refractive-Index, Nanoarchitected Titanium Dioxide for 3D Dielectric Photonic Crystals, Nano Lett., 2020, 20(5), p 3513–3520.10.1021/acs.nanolett.0c00454 ↗
57. I. Cooperstein, S.R.K.C. Indukuri, A. Bouketov, U. Levy, and S. Magdassi, 3D Printing of Micrometer-Sized Transparent Ceramics with On-Demand Optical-Gain Properties, Adv. Mater., 2020, 32(28), p 2001675.10.1002/adma.202001675 ↗
58. X. Wen, B. Zhang, W. Wang, F. Ye, S. Yue, H. Guo, G. Gao, Y. Zhao, Q. Fang, C. Nguyen, X. Zhang, J. Bao, J.T. Robinson, P.M. Ajayan, and J. Lou, 3D-printed Silica with Nanoscale Resolution, Nat. Mater., 2021, 20(11), p 1506–1511.10.1038/s41563-021-01111-2 ↗
59. R.P. Chaudhary, C. Parameswaran, M. Idrees, A.S. Rasaki, C. Liu, Z. Chen, and P. Colombo, Additive Manufacturing of Polymer-Derived Ceramics: Materials, Technologies, Properties and Potential Applications, Prog. Mater. Sci., 2022, 128, 100969.10.1016/j.pmatsci.2022.100969 ↗
60. E. Zanchetta, M. Cattaldo, G. Franchin, M. Schwentenwein, J. Homa, G. Brusatin, and P. Colombo, Stereolithography of SiOC Ceramic Microcomponents, Adv. Mater., 2016, 28(2), p 370–376.10.1002/adma.201503470 ↗
61. Y. Fu, G. Xu, Z. Chen, C. Liu, D. Wang, and C. Lao, Multiple Metals Doped Polymer-Derived SiOC Ceramics for 3D Printing, Ceram. Int., 2018, 44(10), p 11030–11038.10.1016/j.ceramint.2018.03.075 ↗
62. C. Ma, C. He, W. Wang, X. Yao, L. Yan, F. Hou, J. Liu, and A. Guo, Metal-Doped Polymer-Derived SiOC Composites with Inorganic Metal Salt as the Metal Source by Digital Light Processing 3D Printing, Virtual Phys. Prototyp., 2020, 15(3), p 294–306.10.1080/17452759.2020.1752967 ↗
63. X. He, R. Wang, S. Qi, J. Cheng, H. Ye, H. Li, S. Chen, B. Jian, and Q. Ge, Vat Photopolymerization 3D Printing of Polymer-Derived SiOC Ceramics with High Precision and High Strength, Addit. Manuf., 2023, 78, 103889.
64. R. Zhou, Y. Wang, Z. Liu, Y. Pang, J. Chen, and J. Kong, Digital Light Processing 3D-Printed Ceramic Metamaterials for Electromagnetic Wave Absorption, Nano-Micro Lett., 2022, 14(1), p 122.10.1007/s40820-022-00865-x ↗
65. S. Xiong, J. Liu, J. Cao, Z. Li, M. Idrees, X. Lin, Z. Long, Z. Liu, P. Wang, C. Liu, and Z. Chen, 3D Printing of Crack-Free Dense Polymer-Derived Ceramic Monoliths and Lattice Skeletons With Improved Thickness and Mechanical Performance, Addit. Manuf., 2022, 57, 102964.
66. J. Ou, M. Huang, Y. Wu, S. Huang, J. Lu, and S. Wu, Additive Manufacturing of Flexible Polymer-Derived Ceramic Matrix Composites, Virtual Phys. Prototyp., 2023, 18(1), e2150230.
67. Z.C. Eckel, C. Zhou, J.H. Martin, A.J. Jacobsen, W.B. Carter, and T.A. Schaedler, Additive Manufacturing of Polymer-Derived Ceramics, Sci., 2016, 351(6268), p 58–62.10.1126/science.aad2688 ↗
68. X. Wang, F. Schmidt, D. Hanaor, P.H. Kamm, S. Li, and A. Gurlo, Additive Manufacturing of Ceramics from Preceramic Polymers: A Versatile Stereolithographic Approach Assisted by Thiol-Ene Click Chemistry, Addit. Manuf., 2019, 27, p 80–90.
69. S.A. Brinckmann, J. Yao, J.C. Young, M.H. Jones, R.S. Fertig, III. and C.P. Frick, Additive Manufacturing of SiCNO Polymer-Derived Ceramics Via Step-Growth Polymerization, Open Ceram., 2023, 15, 100414.
70. P. Greil, Polymer Derived Engineering Ceramics, Adv. Eng. Mater., 2020, 2(6), p 339–348.10.1002/1527-2648(200006)2:6<339::AID-ADEM339>3.0.CO;2-K ↗
71. S.A. Brinckmann, N. Patra, J. Yao, T.H. Ware, C.P. Frick, and R.S. Fertig III., Stereolithography of SiOC polymer-derived ceramics filled with SiC micronwhiskers, Adv. Eng. Mater., 2018, 20(11), p 1800593.10.1002/adem.201800593 ↗
72. J. Yang, R. Yu, X. Li, Y. He, L. Wang, W. Huang, and J. Jiao, Silicon Carbide Whiskers Reinforced SiOC Ceramics Through Digital Light Processing 3D Printing Technology, Ceram. Int., 2021, 47(13), p 18314–18322.10.1016/j.ceramint.2021.03.152 ↗
73. S. Li, Y. Zhang, T. Zhao, W. Han, W. Duan, L. Wang, R. Dou, and G. Wang, Additive Manufacturing of SiBCN/Si3N4w Composites from Preceramic Polymers by Digital Light Processing, RSC Adv., 2020, 10(10), p 5681–5689.10.1039/C9RA09598E ↗
74. M.R. O’Masta, E. Stonkevitch, K.A. Porter, P.P. Bui, Z.C. Eckel, and T.A. Schaedler, Additive Manufacturing of Polymer-Derived Ceramic Matrix Composites, J. Am. Ceram. Soc., 2020, 103(12), p 6712–6723.10.1111/jace.17275 ↗
75. J. Essmeister, A.A. Altun, M. Staudacher, T. Lube, M. Schwentenwein, and T. Konegger, Stereolithography-Based Additive Manufacturing of Polymer-Derived SiOC/SiC Ceramic Composites, J. Eur. Ceram. Soc., 2020, 42(13), p 5343–5354.10.1016/j.jeurceramsoc.2022.06.021 ↗
76. N. Zhu, Y. Hou, L. Zhang, and G. Wen, Preparation of h-BN/SiCO Ceramic Matrix Composites with High Thermal Conductivity and Strength by Vat Photopolymerization 3D Printing, J. Eur. Ceram. Soc., 2024, 44(10), p 5885–5895.10.1016/j.jeurceramsoc.2024.03.007 ↗
77. Y. Feng, X. Guo, H. Elsayed, K. Huang, G. Franchin, G. Motz, Y. Tong, H. Gong, and P. Colombo, Enhanced Electromagnetic Microwave Absorption Properties of SiCN(Fe) Ceramics Produced by Additive Manufacturing Via In-Situ Reaction Of Ferrocene, Ceram. Int., 2023, 49(15), p 25051–25062.10.1016/j.ceramint.2023.05.035 ↗