Advances and Challenges in Interference-Fit Technology for Enhancing the Mechanical Performance of Joints
Source abstract
Abstract
In industries such as aerospace, defense, and automotive, mechanical joining methods are widely adopted. However, the stress concentration effects have diminished the fatigue performance of these connections. Interference fit has emerged as a method proven to effectively enhance the fatigue resistance of such joints, yet traditional theoretical frameworks have not fully elucidated the mechanisms behind its fatigue strengthening, hindering the advancement and application of this technology. This article meticulously assesses and synthesizes key research findings and applications of interference fit from the past 15 years, delving into its classifications, installation processes, and their impacts on the mechanical performance of joints, followed by an in-depth analysis of its fatigue strengthening mechanisms and the limitations of current theories. Furthermore, the article explores hybrid reinforcement techniques that combine interference fit with other methods, offering an advanced strategy for joint reinforcement. Finally, several key challenges are identified for further exploration. The aim of this review is to lay the groundwork for future research, deepen the understanding of interference-fit technology, and promote the design of more robust and reliable mechanical joints.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Mechanical Behavior of Composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. M. Wang, Y. Xue, and K. Wang, Modeling and Simulation in an Aircraft Safety Design Based on a Hybrid AHP and FCA Algorithm, Comput. Intell. Neurosci., 2022, 2022, p 1–11.
2. J. Xu, W. Tian, L. Kan, and Y. Chen, Safety Assessment of Transport Aircraft Heavy Equipment Airdrop: An Improved STPA-BN Mechanism, IEEE Access, 2022, 10, p 87522–87534.10.1109/ACCESS.2022.3199740 ↗
3. Y. Chen, C. Ji, X. Pan, J. Yang, and B. Wang, Effect of Staggered Holes with Multi-site Damage on Fatigue Performance Based on Tests, DIC Technique and Numerical Calculations, Thin-Walled Struct., 2020, 148, p 106607.10.1016/j.tws.2020.106607 ↗
4. S.K. Bhaumik, M. Sujata, and M.A. Venkataswamy, Fatigue Failure of Aircraft Components, Eng. Fail. Anal., 2008, 15, p 675–694.10.1016/j.engfailanal.2007.10.001 ↗
5. G. Pichon, A. Daidié, E. Paroissien, and A. Benaben, Quasi-static Strength and Fatigue Life of Aerospace Hole-to-Hole Bolted Joints, Eng. Fail. Anal., 2023, 143, p 106860.10.1016/j.engfailanal.2022.106860 ↗
6. T. Sonar, V. Balasubramanian, S. Malarvizhi, T. Venkateswaran, and D. Sivakumar, An Overview on Welding of Inconel 718 Alloy—Effect of Welding Processes on Microstructural Evolution and Mechanical Properties of Joints, Mater Charact, 2021, 174, p 110997.10.1016/j.matchar.2021.110997 ↗
7. T. Sonar, M. Ivanov, E. Trofimov, A. Tingaev, and I. Suleymanova, A Comprehensive Review on Fusion Welding of High Entropy Alloys—Processing, Microstructural Evolution and Mechanical Properties of Joints, Int. J. Lightweight Mater. Manuf., 2024, 7, p 122–183.
8. S. Kilic, F. Ozturk, and M.F. Demirdogen, A Comprehensive Literature Review on Friction Stir Welding: Process Parameters, Joint Integrity, and Mechanical Properties, J. Eng. Res., 2023, in press.
9. D. Ambrosio, Y. Morisada, K. Ushioda, and H. Fujii, Material Flow in Friction Stir Welding: A Review, J. Mater. Process. Technol., 2023, 320, p 118116.10.1016/j.jmatprotec.2023.118116 ↗
10. H.F.M. de Queiroz and M.D. Banea, Methods to Increase the Mechanical Performance of Composite Adhesive Joints: An Overview with Focus on Joints with Natural Fibre Composite Adherends, J. Compos. Mater., 2022, 56, p 3993–4010.10.1177/00219983221125906 ↗
11. N. Karthikeyan and J. Naveen, Progress in Adhesive-Bonded Composite Joints: A Comprehensive Review, J. Reinf. Plast. Compos., 2024, in press.10.1177/07316844241248236 ↗
12. M.K. Budzik, M. Wolfahrt, P. Reis, M. Kozłowski, J. Sena-Cruz, L. Papadakis, M. Nasr Saleh, K.V. Machalicka, S. Teixeira De Freitas, and A.P. Vassilopoulos, Testing Mechanical Performance of Adhesively Bonded Composite Joints in Engineering Applications: An Overview, J. Adhes., 2022, 98, p 2133–2209.10.1080/00218464.2021.1953479 ↗
13. M.A. Shaheen, A.S.J. Foster, L.S. Cunningham, and S. Afshan, Behaviour of Stainless and High Strength Steel Bolt Assemblies at Elevated Temperatures—A Review, Fire Saf. J., 2020, 113, p 102975.10.1016/j.firesaf.2020.102975 ↗
14. A. El-Sisi, A. Hassanin, F. Alsharari, N. Galustanian, and H. Salim, Failure Behavior of Composite Bolted Joints: Review, CivilEng, 2022, 3, p 1061–1076.10.3390/civileng3040060 ↗
15. D. Croccolo, M. De Agostinis, S. Fini, M.Y. Khan, M. Mele, and G. Olmi, Optimization of Bolted Joints: A Literature Review, Metals, 2023, 13, p 1708.10.3390/met13101708 ↗
16. Y. Liu, M. Zhu, X. Lu, S. Wang, and Z. Li, A Review of Cross-Scale Theoretical Contact Models for Bolted Joints Interfaces, Coatings, 2024, 14, p 539.10.3390/coatings14050539 ↗
17. M. Warren, A. Antoniou, and L. Stewart, A Review of Experimentation and Computational Modeling of Dynamic Bolt Fracture, J. Constr. Steel Res., 2022, 194, p 107293.10.1016/j.jcsr.2022.107293 ↗
18. H. Zhao, J. Xi, K. Zheng, Z. Shi, J. Lin, K. Nikbin, S. Duan, and B. Wang, A Review on Solid Riveting Techniques in Aircraft Assembling, Manuf. Rev., 2020, 7, p 40.
19. S.D. Thoppul, J. Finegan, and R.F. Gibson, Mechanics of Mechanically Fastened Joints in Polymer–Matrix Composite Structures—A Review, Compos. Sci. Technol., 2009, 69, p 301–329.10.1016/j.compscitech.2008.09.037 ↗
20. X. Centelles, J.R. Castro, and L.F. Cabeza, Experimental Results of Mechanical, Adhesive, and Laminated Connections for Laminated Glass Elements—A Review, Eng. Struct., 2019, 180, p 192–204.10.1016/j.engstruct.2018.11.029 ↗
21. K. Yokozeki, K. Hisazumi, T. Vallée, T. Evers, T. Ummenhofer, J. Boretzki, and M. Albiez, Hybrid Joints Consisting of Pre-tensioned Bolts and a Bonded Connection, Part II: Large-Scale Experiments, Int. J. Adhes. Adhes., 2024, 128, p 103523.10.1016/j.ijadhadh.2023.103523 ↗
22. K. Yokozeki, K. Hisazumi, T. Vallée, T. Evers, T. Ummenhofer, J. Boretzki, and M. Albiez, Hybrid Joints Consisting of Pre-tensioned Bolts and a Bonded Connection—A Comprehensive Review Part I: Local Approach, Int. J. Adhes. Adhes., 2024, 132, p 103713.10.1016/j.ijadhadh.2024.103713 ↗
23. C. Zeng, J.T. Xue, X.Y. Liu, and W. Tian, Design Variables Influencing the Fatigue of Al 2024–T3 in Riveted Aircraft Lap Joints: Squeeze Force and Initial Fit Tolerance, Int. J. Fatigue, 2020, 140, p 105751.10.1016/j.ijfatigue.2020.105751 ↗
24. Y. Liu, M. Li, X. Lu, Q. Li, and X. Zhu, Pull-Out Performance and Optimization of a Novel Interference-Fit Rivet for Composite Joints, Compos. Struct., 2021, 269, p 114041.10.1016/j.compstruct.2021.114041 ↗
25. C. Yao, Z. Qi, W. Chen, and C. Zhang, Effect of CF/PEEK Plasticity Behavior on the Mechanical Performance of Interference-Fit Joint, Polym. Compos., 2021, 42, p 2574–2588.10.1002/pc.26003 ↗
26. P. Zou, X. Chen, H. Chen, and G. Xu, Damage Propagation and Strength Prediction of a Single-Lap Interference-Fit Laminate Structure, Front. Mech. Eng., 2020, 15, p 558–570.10.1007/s11465-020-0591-5 ↗
27. G. Xu, K. Zhang, H. Cheng, B. Luo, B. Liang, Y. Cheng, and H. Li, An Experimental Study on Mechanical Behavior and Failure Mechanism of Sleeved Fasteners and Conventional Bolt for Composite Interference-Fit Joints, Thin-Walled Struct., 2022, 170, p 108537.10.1016/j.tws.2021.108537 ↗
28. J. Hu, K. Zhang, Q. Yang, H. Cheng, P. Liu, and Y. Yang, An Experimental Study on Mechanical Response of Single-Lap Bolted CFRP Composite Interference-Fit Joints, Compos. Struct., 2018, 196, p 76–88.10.1016/j.compstruct.2018.05.016 ↗
29. X. Zhang, H. Jiang, T. Luo, L. Hu, G. Li, and J. Cui, Theoretical and Experimental Investigation on Interference Fit in Electromagnetic Riveting, Int. J. Mech. Sci., 2019, 156, p 261–271.10.1016/j.ijmecsci.2019.04.002 ↗
30. H. Niu, Y. Sun, C. Lin, and Y. Zou, Study on Interference Connection Based on Shape Recovery of Nitinb Shape Memory Alloy, Materials, 2021, 14, p 2328.10.3390/ma14092328 ↗
31. A. Mohammadpour and T.N. Chakherlou, Numerical and Experimental Study of an Interference Fitted Joint Using a Large Deformation Chaboche Type Combined Isotropic–Kinematic Hardening Law and Mortar Contact Method, Int. J. Mech. Sci., 2016, 106, p 297–318.10.1016/j.ijmecsci.2015.10.012 ↗
32. A. Strozzi, E. Bertocchi, A. Baldini, and S. Mantovani, Normalization of the Stress Concentrations at the Rounded Edges of an Interference Fit Between a Solid Shaft Subjected to Bending and a Hub, Mech. Based Des. Struct. Mech., 2015, 44, p 405–425.10.1080/15397734.2015.1086274 ↗
33. J. Hu, K. Zhang, H. Cheng, and P. Zou, Modeling on Mechanical Behavior and Damage Evolution of Single-Lap Bolted Composite Interference-Fit Joints Under Thermal Effects, Chin. J. Aeronaut., 2021, 34, p 230–244.10.1016/j.cja.2020.09.023 ↗
34. S.B. Inverarity, R. Das, and A.P. Mouritz, Composite-to-Metal Joining Using Interference Fit Micropins, Compos. A Appl. Sci. Manuf., 2022, 156, p 106895.10.1016/j.compositesa.2022.106895 ↗
35. X. Liu, H. Cui, S. Zhang, H. Liu, G. Liu, and S. Li, Experimental and Numerical Investigations on Fatigue Behavior of Aluminum Alloy 7050–T7451 Single Lap Four-Bolted Joints, J. Mater. Sci. Technol., 2018, 34, p 1205–1213.10.1016/j.jmst.2017.09.020 ↗
36. M.A. Brown and J.L. Evans, Fatigue Life Variability Due to Variations in Interference Fit of Steel Bushings in 7075–T651 Aluminum Lugs, Int. J. Fatigue, 2012, 44, p 177–187.10.1016/j.ijfatigue.2012.05.001 ↗
37. M. Yanishevsky, G. Li, G. Shi, and D. Backman, Fractographic Examination of Coupons Representing Aircraft Structural Joints With and Without Hole Cold Expansion, Eng. Fail. Anal., 2013, 30, p 74–90.10.1016/j.engfailanal.2012.12.008 ↗
38. X. Liu, X. Xi, C. Bai, J. Yang, and X. Yang, Dynamic Response and Failure Mechanism of Ti-6AL-4V Hi-Lock Bolts Under Combined Tensile-Shear Loading, Int. J. Impact Eng, 2019, 131, p 140–151.10.1016/j.ijimpeng.2019.04.025 ↗
39. S. Hua, M. Pang, F. Ji, J. Chen, and G. Liu, Microstructure and Tribological Properties of Ti2AlC-B Particle-Enhanced Self-Lubricating Coatings on Ti6Al4V by Ultrasonic Impact Treatment and Laser Cladding, Mater. Today Commun., 2023, 34, p 105165.10.1016/j.mtcomm.2022.105165 ↗
40. S. Liu, Y. Kim, J. Jung, S. Bae, S. Jeong, and K. Shin, Effect of Ultrasonic Shot Peening and Laser Shock Peening on the Microstructure and Microhardness of IN738LC Alloys, Materials, 2023, 16, p 1802.10.3390/ma16051802 ↗
41. H. Huang, J. Niu, X. Xing, Q. Lin, H. Chen, and Y. Qiao, Effects of the Shot Peening Process on Corrosion Resistance of Aluminum Alloy: A Review, Coatings, 2022, 12, p 629.10.3390/coatings12050629 ↗
42. H. Soyama and A.M. Korsunsky, A Critical Comparative Review of Cavitation Peening and Other Surface Peening Methods, J. Mater. Process. Technol., 2022, 305, p 117586.10.1016/j.jmatprotec.2022.117586 ↗
43. C. Zhang, Y. Dong, and C. Ye, Recent Developments and Novel Applications of Laser Shock Peening: A Review, Adv. Eng. Mater., 2021, 23, p 2001216.10.1002/adem.202001216 ↗
44. G.V. Duncheva, J.T. Maximov, and N. Ganev, A New Conception for Enhancement of Fatigue Life of Large Number of Fastener Holes in Aircraft Structures, Fatigue Fract. Eng. Mater. Struct., 2017, 40, p 176–189.10.1111/ffe.12483 ↗
45. S. Faghih, S.K. Shaha, S.B. Behravesh, and H. Jahed, Split Sleeve Cold Expansion of AZ31B Sheet: Microstructure, Texture and Residual Stress, Mater. Des., 2020, 186, p 108213.10.1016/j.matdes.2019.108213 ↗
46. D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, F. Robusto, and C. Scapecchi, Fretting Fatigue in Mechanical Joints: A Literature Review, Lubricants, 2022, 10, p 53.10.3390/lubricants10040053 ↗
47. Y. Zuo, T. Yue, R. Jiang, Z. Cao, and L. Yang, Bolt Insertion Damage and Mechanical Behaviors Investigation of CFRP/CFRP Interference Fit Bolted Joints, Chin. J. Aeronaut., 2022, 35, p 354–365.10.1016/j.cja.2022.01.027 ↗
48. Y. Fu, E. Ge, H. Su, J. Xu, and R. Li, Cold Expansion Technology of Connection Holes in Aircraft Structures: A Review and Prospect, Chin. J. Aeronaut., 2015, 28, p 961–973.10.1016/j.cja.2015.05.006 ↗
49. E. Abdollahi and T.N. Chakherlou, Experimental and Numerical Analyses of Mean Stress Relaxation in Cold Expanded Plate of Al-Alloy 2024–T3 in Double Shear Lap Joints, Fatigue Fract. Eng. Mater. Struct., 2019, 42, p 209–222.10.1111/ffe.12897 ↗
50. T.N. Chakherlou and A. Yaghoobi, Numerical Simulation of Residual Stress Relaxation Around a Cold-Expanded Fastener Hole Under Longitudinal Cyclic Loading Using Different Kinematic Hardening Models, Fatigue Fract. Eng. Mater. Struct., 2010, 33, p 740–751.10.1111/j.1460-2695.2010.01485.x ↗
51. J. Hu, K. Zhang, H. Cheng, and Z. Qi, An Experimental Investigation on Interfacial Behavior and Preload Response of Composite Bolted Interference-Fit Joints Under Assembly and Thermal Conditions, Aerosp. Sci. Technol., 2020, 103, 105917.10.1016/j.ast.2020.105917 ↗
52. W. Okuniewski, M. Walczak, and M. Szala, Effects of Shot Peening and Electropolishing Treatment on the Properties of Additively and Conventionally Manufactured Ti6Al4V Alloy: A Review, Materials, 2024, 17, p 934.10.3390/ma17040934 ↗
53. D. Zhou, Y. Xu, X. Gao, H. Huang, and S. Lv, Experimental Study on the Reduction Effect of Pit Texture on Disassembly Damage for Interference Fit, Chin. J. Mech. Eng., 2023, 36, p 55.10.1186/s10033-023-00885-7 ↗
54. S. Liu, X. Chen, C. Song, C. Zhu, H. Bai, and A. Fuentes-Aznar, Influence of Gear–Shaft Interference Fit Assembly on the Meshing Characteristics of Cylindrical Gears Considering Comprehensive Modifications, Mech. Mach. Theory, 2023, 182, p 105247.10.1016/j.mechmachtheory.2023.105247 ↗
55. Y. Shu, G. Yang, and Z. Liu, Experimental Study on Fretting Damage in the Interference Fit Area Of High-Speed Train Wheels and Axles Based on Specimen, Eng. Fail. Anal., 2022, 141, p 106619.10.1016/j.engfailanal.2022.106619 ↗
56. Y. Cao, Y. He, K. Wang, and Y. Zhen, The Installation Load Prediction Method of Interference Fit Between the Submarine Elliptical Pipeline and Mechanical Connector, Ocean Eng., 2023, 281, p 114796.10.1016/j.oceaneng.2023.114796 ↗
57. C. Zeng, W. Tian, and W.H. Liao, The Effect of Residual Stress Due to Interference Fit on the Fatigue Behavior of a Fastener Hole with Edge Cracks, Eng. Fail. Anal., 2016, 66, p 72–87.10.1016/j.engfailanal.2016.04.012 ↗
58. L. Esposito, M. Bruno, and A. Bertocco, Analytical Formulation of the Contact Pressure Evolution for Interference Joints Under Creep Regime, Int. J. Press. Vessels Pip., 2020, 185, p 104126.10.1016/j.ijpvp.2020.104126 ↗
59. M. Skorupa, T. Machniewicz, A. Skorupa, and A. Korbel, Fatigue Strength Reduction Factors at Rivet Holes for Aircraft Fuselage Lap Joints, Int. J. Fatigue, 2015, 80, p 417–425.10.1016/j.ijfatigue.2015.06.025 ↗
60. X. Wang, Z. Qi, M. Lu, and H. Pan, A Non-Uniform Interference-Fit Size Investigation of CFRP/Al Alloys by Riveting Mold Design, Processes, 2023, 11, p 962.10.3390/pr11030962 ↗
61. Z. Cao and M. Cardew-Hall, Interference-Fit Riveting Technique in Fiber Composite Laminates, Aerosp. Sci. Technol., 2006, 10, p 327–330.10.1016/j.ast.2005.11.003 ↗
62. J. Cui, H. Sun, L. Jing, L. Sun, G. Li, and H. Jiang, Failure Analysis of Pulse Magnetic Induction Coil in Electromagnetic Riveting, Eng. Fail. Anal., 2022, 136, p 106178.10.1016/j.engfailanal.2022.106178 ↗
63. Z. Cao and Y. Zuo, Electromagnetic Riveting Technique And Its Applications, Chin. J. Aeronaut., 2020, 33, p 5–15.10.1016/j.cja.2018.12.023 ↗
64. C. Gong, Z. Fan, L. Cheng, and J. Deng, Predictions of the Total Electromagnetic Repulsion Force in Electromagnetic Riveting Process: Numerical Analysis Model and Experiments, J. Manuf. Process., 2021, 69, p 656–670.10.1016/j.jmapro.2021.08.022 ↗
65. X. Wang, Z. Lou, X. Wang, X. Hao, and Y. Wang, Prediction of Stress Distribution in Press-Fit Process of Interference Fit with a New Theoretical Model, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2019, 233, p 2834–2846.10.1177/0954406218799783 ↗
66. H.L. Nguyen and V.P. Lam, Effects of Nickel Plating on Interference Fit Between Medium Carbon Steel and Copper-Zinc Alloy Parts, Metals, 2023, 13, p 247.10.3390/met13020247 ↗
67. A. Özel, S. Temiz, M.D. Aydin, and S. Sen, Stress Analysis of Shrink-Fitted Joints for Various Fit Forms via Finite Element Method, Mater. Des., 2005, 26, p 281–289.10.1016/j.matdes.2004.06.014 ↗
68. C. Matias and E. Katsav, in (Springer, Cham, 2019), pp. 674–691.10.1007/978-3-030-21503-3_54 ↗
69. X. Wang, Y. Shi, H. Pan, and Y. Chen, Experimental Investigation and Quantitative Prediction in Interference-Fit Size of CFRP Riveted Joints Under a Transversal Ultrasonic Vibration-Assisted Riveting, Sci. Rep., 2023, 13, p 14408.10.1038/s41598-023-41578-4 ↗
70. X. Wang, C. Xu, Y. Wang, T. Lin, and Z. Lou, Research on Ultrasonic Assisted Press-Fit assembly of Small Interference Fits, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2024, 238, p 4112–4123.10.1177/09544062231202146 ↗
71. Y. Zuo, Z. Cao, G. Zheng, and Q. Zhang, Damage Behavior Investigation of CFRP/Ti Bolted Joint During Interference Fit Bolt Dynamic Installation Progress, Eng. Fail. Anal., 2020, 111, p 104454.10.1016/j.engfailanal.2020.104454 ↗
72. A. Wang, Z. Wang, S. Wang, M. Zhao, Y. Zhao, Y. Cao, and Z. Chang, Mechanical Behaviour and Damage Mechanism of Static/Dynamic Interference-Fit Installation in Laminated Bolted Joint Using Ultra-Thin Plies, Tribol. Int., 2024, 194, p 109482.10.1016/j.triboint.2024.109482 ↗
73. X. Wang, Z. Cao, Y. Wang, and Y. Guo, Influence of Bolt Dynamic Installation on Topography Characteristics and Mechanical Behaviors of CFRP Interference-Fit Bolted Joints, Chin. J. Aeronaut., 2024, 37, p 482–500.10.1016/j.cja.2023.11.004 ↗
74. K. Jin, H. Wang, J. Tao, and J. Tian, Effect of the Interference Fit on the Stress Distribution and Failure Mode of a Flat-Head Riveted GLARE Joint, Compos. Struct., 2020, 235, p 111788.10.1016/j.compstruct.2019.111788 ↗
75. J. Li, W. Guo, P. Zou, Z. Zhou, and Y. Fan, Multi-stage Mechanical Behavior and Damage Mechanism of Composite Interference-Fit Joints Subject to Long-Term Low-Temperature Aging, J. Braz. Soc. Mech. Sci. Eng., 2023, 45, p 602.10.1007/s40430-023-04439-9 ↗
76. M.M. Vijayamohanan, B.K. Karthikeyan, and M. John, An Investigation into the Joint Performance of Interference Fit Rivets and Failure Analysis of Aircraft Fuselage Skin in Aerospace Applications, J. Braz. Soc. Mech. Sci. Eng., 2024, 46, p 1.10.1007/s40430-023-04588-x ↗
77. G. Xu, H. Cheng, K. Zhang, B. Liang, Y. Cheng, J. Hu, and C. Liu, Modeling of Damage Behavior of Carbon Fiber Reinforced Plastic Composites Interference Bolting with Sleeve, Mater. Des., 2020, 194, p 108904.10.1016/j.matdes.2020.108904 ↗
78. J. Yun, J. Choi, and J. Kweon, A Study on the Strength Improvement of the Multi-bolted Joint, Compos. Struct., 2014, 108, p 409–416.10.1016/j.compstruct.2013.09.047 ↗
79. B.G. Kiral, Effect of the Clearance and Interference-Fit on Failure of the Pin-Loaded Composites, Mater. Des., 2010, 31, p 85–93.10.1016/j.matdes.2009.07.009 ↗
80. A. Wang, Z. Wang, M. Zhao, Y. Zhao, X. Men, Z. Chang, and Y. Kang, Bearing Failure and Strengthening Mechanism of Countersunk Thin-Ply Laminated Joints Using an Interference-Fit Bolt, Polym. Test., 2024, 130, p 108298.10.1016/j.polymertesting.2023.108298 ↗
81. A. Wang, Z. Wang, M. Zhao, Y. Zhao, and Z. Chang, Effects of Ply Thickness and Interference-Fit on the Bearing Strength of Single-Lap Countersunk Composite Joints, Thin-Walled Struct., 2023, 189, 110878.10.1016/j.tws.2023.110878 ↗
82. C. Yao, Z. Qi, and W. Chen, Lightweight and High-Strength Interference-Fit Composite Joint Reinforced by Thermoplastic Composite Fastener, Thin-Walled Struct., 2022, 179, 109471.10.1016/j.tws.2022.109471 ↗
83. Z. Kapidžić, Finite Element Modeling of Quasi-static Failure of Aluminum Joints with Titanium Bolts and Liquid Shim, Eng. Fail. Anal., 2024, 159, p 108083.10.1016/j.engfailanal.2024.108083 ↗
84. J. Hu, K. Zhang, Q. Yang, H. Cheng, S. Liu, and Y. Yang, Fretting Behaviors of Interface Between CFRP and Coated Titanium Alloy in Composite Interference-Fit Joints Under Service Condition, Mater. Des., 2017, 134, p 91–102.10.1016/j.matdes.2017.08.018 ↗
85. J. Hu, S. Mi, Z. Yang, C. Wang, Y. Yang, and W. Tian, An Experimental Investigation on Bearing Behavior and Failure Mechanism of Bolted Composite Interference-Fit Joints Under Thermal Effects, Eng. Fail. Anal., 2022, 131, 105830.10.1016/j.engfailanal.2021.105830 ↗
86. J. Hu, J. Jin, S. Xuan, S. Mi, W. Tian, and W. Liao, Influence of Cyclical Hygrothermal Aging on Mechanical Response and Structural Durability of Composite Bolted Interference-Fit Joints, Thin-Walled Struct., 2022, 173, p 108997.10.1016/j.tws.2022.108997 ↗
87. T.N. Chakherlou, M. Mirzajanzadeh, and J. Vogwell, Experimental and Numerical Investigations into the Effect of an Interference Fit on the Fatigue Life of Double Shear Lap Joints, Eng. Fail. Anal., 2009, 16, p 2066–2080.10.1016/j.engfailanal.2009.01.009 ↗
88. D. Croccolo, M. De Agostinis, L. Ceschini, A. Morri, and A. Marconi, Interference Fit Effect on Improving Fatigue Life of a Holed Single Plate, Fatigue Fract. Eng. Mater. Struct., 2013, 36, p 689–698.10.1111/ffe.12039 ↗
89. T.N. Chakherlou, M. Mirzajanzadeh, B. Abazadeh, and K. Saeedi, An Investigation About Interference Fit Effect on Improving Fatigue Life of a Holed Single Plate in Joints, Eur. J. Mech. A. Solids, 2010, 29, p 675–682.10.1016/j.euromechsol.2009.12.009 ↗
90. T.N. Chakherlou, M. Mirzajanzadeh, and K.H. Saeedi, Fatigue Crack Growth and Life Prediction of a Single Interference Fitted Holed Plate, Fatigue Fract. Eng. Mater. Struct., 2010, 33, p 633–644.10.1111/j.1460-2695.2010.01476.x ↗
91. M. Mirzajanzadeh, T.N. Chakherlou, and J. Vogwell, The Effect of Interference-Fit on Fretting Fatigue Crack Initiation and ΔK of a Single Pinned Plate in 7075 Al-Alloy, Eng. Fract. Mech., 2011, 78, p 1233–1246.10.1016/j.engfracmech.2011.01.006 ↗
92. M. Le Falher, S. Fouvry, P. Arnaud, V. Maurel, N. Antoni, and R. Billardon, Fretting-Fatigue of Shrink Fit Lug-Bush Assemblies: Interference-Fit Effect, Tribol. Int., 2023, 186, 108581.10.1016/j.triboint.2023.108581 ↗
93. X. Bian, C. Wei, and Y. Liu, Research on the Fretting Contact Fatigue Strength of Interference Fit in High Speed Rail Traction Motor Shafts, Eng. Fail. Anal., 2024, 157, 107875.10.1016/j.engfailanal.2023.107875 ↗
94. Y. Shu, G. Yang, and Z. Liu, Simulation Research on Fretting Wear of Train Axles with Interference Fit Based on Press-Fitted Specimen, Wear, 2023, 523, 204777.10.1016/j.wear.2023.204777 ↗
95. T.N. Chakherlou, M. Mirzajanzadeh, and J. Vogwell, Effect of Hole Lubrication on the Fretting Fatigue Life of Double Shear Lap Joints: An Experimental and Numerical Study, Eng. Fail. Anal., 2009, 16, p 2388–2399.10.1016/j.engfailanal.2009.03.031 ↗
96. F. Lanoue, A. Vadean, and B. Sanschagrin, Finite Element Analysis and Contact Modelling Considerations of Interference Fits for Fretting Fatigue Strength Calculations, Simul. Model. Pract. Theory, 2009, 17, p 1587–1602.10.1016/j.simpat.2009.06.017 ↗
97. O. Jin, J.R. Calcaterra, S. Mall, and S.W. Dean, Life Prediction of Fretting Fatigue of TI-6AL-4V, J. ASTM Int., 2006, 3, 100346.10.1520/JAI100346 ↗
98. B. Ferry, J.A. Araújo, S. Pommier, and K. Demmou, Life of a Ti–6Al–4V Alloy Under Fretting Fatigue: Study of New Nonlocal Parameters, Tribol. Int., 2017, 108, p 23–31.10.1016/j.triboint.2016.11.003 ↗
99. F. Lanoue, A. Vadean, and B. Sanschagrin, Fretting Fatigue Strength Reduction Factor for Interference Fits, Simul. Model. Pract. Theory, 2011, 19, p 1811–1823.10.1016/j.simpat.2011.05.004 ↗
100. N.L. Pedersen, On Optimization of Interference Fit Assembly, Struct. Multidiscip. Optim., 2016, 54, p 349–359.10.1007/s00158-016-1419-0 ↗