DataVXJournal of Materials Engineering and PerformancePaper
journal article·2025-05

Processing, Defect Formation, Microstructure, and Mechanical Properties of Additively Manufactured Refractory Metals: A Review

Chunmei Ma, Yunwei Gui, Yongtian Wang, Xin Dong, Yong Huang, Huadong Fu, Guogang Shu

Journal of Materials Engineering and Performance· Volume 34· Issue 9
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Ceramics & glasses

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (93)

Show source-provided references
1. A. Talignani, R. Seede, A. Whitt, S. Zheng, J. Ye, I. Karaman, M.M. Kirka, Y. Katoh and Y.M. Wang, A Review on Additive Manufacturing of Refractory Tungsten and Tungsten Alloys, Addit. Manuf., 2022, 58, p 103009. https://doi.org/10.1016/j.addma.2022.10300910.1016/j.addma.2022.103009 ↗
2. C.H. Belcher, B.E. MacDonald, D. Apelian and E.J. Lavernia, The Role of Interstitial Constituents in Refractory Complex Concentrated Alloys, Prog. Mater. Sci., 2023, 137, 101140. https://doi.org/10.1016/j.pmatsci.2023.10114010.1016/j.pmatsci.2023.101140 ↗
3. J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau and S.-Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Adv. Eng. Mater., 2004, 6(5), p 299–303. https://doi.org/10.1002/adem.20030056710.1002/adem.200300567 ↗
4. Y.-G. Yan and K. Wang, The Intrinsic Strength Prediction by Machine Learning for Refractory High Entropy Alloys, Tungsten, 2023, 5(4), p 531–538. https://doi.org/10.1007/s42864-022-00169-y10.1007/s42864-022-00169-y ↗
5. S.H. Pan, G.C. Yao, Y.N. Cui, F.S. Meng, C. Luo, T.Q. Zheng and G. Singh, Additive Manufacturing of Tungsten Tungsten-Based Alloys, and Tungsten Matrix Composites, Tungsten, 2023, 5(1), p 1–31. https://doi.org/10.1007/s42864-022-00153-610.1007/s42864-022-00153-6 ↗
6. K.-L. Li, J.-H. Chen, C.-C. Zhao, Z.-J. Shen and W. Liu, A Review of Tungsten Fabricated via Laser Powder Bed Fusion, Tungsten, 2021, 3(2), p 218–233. https://doi.org/10.1007/s42864-021-00089-310.1007/s42864-021-00089-3 ↗
7. B. Chen and L. Zhuo, Latest Progress on Refractory High Entropy Alloys: Composition, Fabrication, Post Processing, Performance, Simulation and Prospect, Int. J. Refract. Met. Hard Mater., 2023, 110, 105993. https://doi.org/10.1016/j.ijrmhm.2022.10599310.1016/j.ijrmhm.2022.105993 ↗
8. W. Xiong, A.X.Y. Guo, S. Zhan, C.-T. Liu and S.C. Cao, Refractory High-Entropy Alloys: A Focused Review of Preparation Methods and Properties, J. Mater. Sci. Technol., 2023, 142, p 196–215. https://doi.org/10.1016/j.jmst.2022.08.04610.1016/j.jmst.2022.08.046 ↗
9. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De and W. Zhang, Additive Manufacturing of Metallic Components—Process, Structure and Properties, Prog. Mater. Sci., 2018, 92, p 112–224.10.1016/j.pmatsci.2017.10.001 ↗
10. Y. Gui, K. Aoyagi, H. Bian and A. Chiba, Detection, Classification and Prediction of Internal Defects from Surface Morphology Data of Metal Parts Fabricated by Powder Bed Fusion Type Additive Manufacturing Using an Electron Beam, Addit. Manuf., 2022, 54, p 102736. https://doi.org/10.1016/j.addma.2022.10273610.1016/j.addma.2022.102736 ↗
11. H.L. Wei, T. Mukherjee, W. Zhang, J.S. Zuback, G.L. Knapp, A. De and T. DebRoy, Mechanistic Models for Additive Manufacturing of Metallic Components, Prog. Mater. Sci., 2019, 2021, p 116.
12. T. Mukherjee, J.W. Elmer, H.L. Wei, T.J. Lienert, W. Zhang, S. Kou and T. DebRoy, Control of Grain Structure, Phases, and Defects in Additive Manufacturing of High-Performance Metallic Components, Prog. Mater. Sci., 2023, 138, 101153. https://doi.org/10.1016/j.pmatsci.2023.10115310.1016/j.pmatsci.2023.101153 ↗
13. S.A. Tyagi and M. Manjaiah, Laser Additive Manufacturing of Titanium-Based Functionally Graded Materials: A Review, J. Mater. Eng. Perform., 2022, 31(8), p 6131–6148. https://doi.org/10.1007/s11665-022-07149-w10.1007/s11665-022-07149-w ↗
14. J. Braun, L. Kaserer, J. Stajkovic, K.-H. Leitz, B. Tabernig, P. Singer, P. Leibenguth, C. Gspan, H. Kestler and G. Leichtfried, Molybdenum and Tungsten Manufactured by Selective Laser Melting: Analysis of Defect Structure and Solidification Mechanisms, Int. J. Refract. Met. Hard Mater., 2019, 84, 104999. https://doi.org/10.1016/j.ijrmhm.2019.10499910.1016/j.ijrmhm.2019.104999 ↗
15. M. Mazur, P. Brincat, M. Leary and M. Brandt, Numerical and Experimental Evaluation of a Conformally Cooled H13 Steel Injection Mould Manufactured with Selective Laser Melting, Int. J. Adv. Manuf. Technol., 2017, 93(1–4), p 881–900.10.1007/s00170-017-0426-7 ↗
16. L. Gallant, A. Hsiao and G. McSorley, Benchmarking of Print Properties and Microstructures of 316L Stainless Steel Laser Powder Bed Fusion Prints, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-023-09087-710.1007/s11665-023-09087-7 ↗
17. S. Liu and Y.C. Shin, Additive Manufacturing of Ti6Al4V Alloy: A Review, Mater. Des., 2019, 164, p 107552. https://doi.org/10.1016/j.matdes.2018.10755210.1016/j.matdes.2018.107552 ↗
18. D. Guo, T. Wang, J. Tang, M. Wang and L. Li, Influence of Interlayer Temperature on Microstructure and Mechanical Properties of Additively Manufactured Inconel 625, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-023-08875-510.1007/s11665-023-08875-5 ↗
19. Y. Gui, K. Aoyagi and A. Chiba, Development of Macro-Defect-Free PBF-EB-Processed Ti-6Al-4V Alloys with Superior Plasticity Using PREP-Synthesized Powder and Machine Learning-Assisted Process Optimization, Mater. Sci. Eng. A, 2023, 864, p 144595. https://doi.org/10.1016/j.msea.2023.14459510.1016/j.msea.2023.144595 ↗
20. M. Galati and L. Iuliano, A Literature Review of Powder-Based Electron Beam Melting Focusing on Numerical Simulations, Addit. Manuf., 2018, 19, p 1–20.
21. Y. Gui, H. Bian, K. Aoyagi and A. Chiba, Microstructure Evolution and Hardness of S30C Carbon Steel Produced by Powder Bed Fusion Using an Electron Beam and Subsequent Heat Treatments, Mater. Lett., 2022, 328, p 133096. https://doi.org/10.1016/j.matlet.2022.13309610.1016/j.matlet.2022.133096 ↗
22. M. Karmuhilan and S. Kumanan, A Review on Additive Manufacturing Processes of Inconel 625, J. Mater. Eng. Perform., 2022, 31(4), p 2583–2592. https://doi.org/10.1007/s11665-021-06427-310.1007/s11665-021-06427-3 ↗
23. P. Mukherjee, A. Gabourel, S.A. Firdosy, D.C. Hofmann and A. Moridi, Additive Manufacturing of Refractory Metals and Carbides for Extreme Environments: An Overview, Sci. Technol. Weld. Join., 2024, 29(2), p 99–115. https://doi.org/10.1177/1362171824123547110.1177/13621718241235471 ↗
24. O. Mireles, Additive Manufacture of Refractory Metals for Aerospace Applications, AIAA Propulsion and Energy 2021 Forum, American Institute of Aeronautics and Astronautics, 2021. https://doi.org/10.2514/6.2021-3234.10.2514/6.2021-3234 ↗
25. M.R. Abdullah and Z. Peng, Review and Perspective on Additive Manufacturing of Refractory High Entropy Alloys, Mater. Today Adv., 2024, 22, 100497. https://doi.org/10.1016/j.mtadv.2024.10049710.1016/j.mtadv.2024.100497 ↗
26. J.M. Torralba and M. Campos, High Entropy Alloys Manufactured by Additive Manufacturing, Metals, 2020, 10, p 639.10.3390/met10050639 ↗
27. B. Liu, P. Zhang, H. Yan, Q. Lu, H. Shi, Z. Liu, D. Wu, T. Sun, R. Li and Q. Wang, A Review on Manufacturing Pure Refractory Metals by Selective Laser Melting, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09693-z10.1007/s11665-024-09693-z ↗
28. N. Uçak, A. Çiçek and K. Aslantas, Machinability of 3D Printed Metallic Materials Fabricated by Selective Laser Melting and Electron Beam Melting: A Review, J. Manuf. Process., 2022, 80, p 414–457.10.1016/j.jmapro.2022.06.023 ↗
29. H. Shipley, D. McDonnell, M. Culleton, R. Lupoi, G. O’Donnell and D. Trimble, Optimisation of Process Parameters to Address Fundamental Challenges during Selective Laser Melting of Ti-6Al-4V: A Review, Int. J. Mach. Tools Manuf, 2018, 128, p 1–20.10.1016/j.ijmachtools.2018.01.003 ↗
30. S.P. Murray, K.M. Pusch, A.T. Polonsky, C.J. Torbet, G.G.E. Seward, N. Zhou, S.A.J. Forsik, P. Nandwana, M.M. Kirka, R.R. Dehoff, W.E. Slye and T.M. Pollock, A Defect-Resistant Co-Ni Superalloy for 3D Printing, Nat. Commun., 2020, 11(1), p 4975. https://doi.org/10.1038/s41467-020-18775-010.1038/s41467-020-18775-0 ↗
31. R.S. Haridas, P. Agrawal, S. Thapliyal, P. Agrawal, A. Dhal, S. Shukla, L. Zhou, Y. Sohn and R.S. Mishra, Synergy of Tensile Strength and High Cycle Fatigue Properties in a Novel Additively Manufactured Al-Ni-Ti-Zr Alloy with a Heterogeneous Microstructure, Addit. Manuf., 2023, 62, 103380. https://doi.org/10.1016/j.addma.2022.10338010.1016/j.addma.2022.103380 ↗
32. J. Shi, S. Ma, S. Wei, J.P. Best, M. Stolpe, A. Beckmann, S. Mostafavi, S. Korte-Kerzel and B. Markert, 3D Pore Structure Characterization and Hardness in a Powder Bed Fusion-Processed Fully Amorphous Zr-Based Bulk Metallic Glass, Mater Charact, 2020, 162, 110178. https://doi.org/10.1016/j.matchar.2020.11017810.1016/j.matchar.2020.110178 ↗
33. W. Zhou, X. Sun, K. Tsunoda, K. Kikuchi, N. Nomura, K. Yoshimi and A. Kawasaki, Powder Fabrication and Laser Additive Manufacturing of MoSiBTiC Alloy, Intermetallics, 2019, 104, p 33–42. https://doi.org/10.1016/j.intermet.2018.10.01210.1016/j.intermet.2018.10.012 ↗
34. M. Aristizabal, P. Jamshidi, A. Saboori, S. Cox and M. Attallah, Laser Powder Bed Fusion of a Zr-Alloy: Tensile Properties and Biocompatibility, Mater. Lett., 2019, 259, 126897.10.1016/j.matlet.2019.126897 ↗
35. C. Wang, Z.J. Li, C.Q. Ji, S.W. Gao and Y.N. Cui, Crystal Plasticity Analysis of the Evolutions of Temperature, Stress and Dislocation in Additively Manufactured Tungsten, Int. J. Refract. Met. Hard Mater., 2022, 2023, p 110.
36. H. Zhang, W. Xu, Y. Xu, Z. Lu and D. Li, The Thermal-Mechanical Behavior of WTaMoNb High-Entropy Alloy via Selective Laser Melting (SLM): Experiment and Simulation, Int. J. Adv. Manuf. Technol., 2018, 96, p 461–474.10.1007/s00170-017-1331-9 ↗
37. A.V. Müller, G. Schlick, R. Neu, C. Anstätt, T. Klimkait, J. Lee, B. Pascher, M. Schmitt and C. Seidel, Additive Manufacturing of Pure Tungsten by Means of Selective Laser Beam Melting with Substrate Preheating Temperatures up to 1000 ∘C, Nucl. Mater. Energy, 2019, 19, p 184–188. https://doi.org/10.1016/j.nme.2019.02.03410.1016/j.nme.2019.02.034 ↗
38. A.T. Sidambe, Y. Tian, P.B. Prangnell and P. Fox, Effect of Processing Parameters on the Densification, Microstructure and Crystallographic Texture during the Laser Powder Bed Fusion of Pure Tungsten, Int. J. Refract. Met. Hard Mater., 2019, 78, p 254–263. https://doi.org/10.1016/j.ijrmhm.2018.10.00410.1016/j.ijrmhm.2018.10.004 ↗
39. K. Li, G. Ma, L. Xing, Y. Wang, C. Yu, J. Chen, J. Ma, G. Wu, W. Liu, Z. Shen and X. Huang, Crack Suppression via In-Situ Oxidation in Additively Manufactured W-Ta Alloy, Mater. Lett., 2020, 263, p 127212. https://doi.org/10.1016/j.matlet.2019.12721210.1016/j.matlet.2019.127212 ↗
40. A. Iveković, N. Omidvari, B. Vrancken, K. Lietaert, L. Thijs, K. Vanmeensel, J. Vleugels and J.-P. Kruth, Selective Laser Melting of Tungsten and Tungsten Alloys, Int. J. Refract. Met. Hard Mater., 2018, 72, p 27–32. https://doi.org/10.1016/j.ijrmhm.2017.12.00510.1016/j.ijrmhm.2017.12.005 ↗
41. J. Xue, Z. Feng, J. Tang, C. Tang and Z. Zhao, Selective Laser Melting Additive Manufacturing of Tungsten with Niobium Alloying: Microstructure and Suppression Mechanism of Microcracks, J. Alloys Compd., 2021, 874, 159879. https://doi.org/10.1016/j.jallcom.2021.15987910.1016/j.jallcom.2021.159879 ↗
42. C. Liu, K. Zhu, W. Ding, Y. Liu, G. Chen and X. Qu, Additive Manufacturing of WMoTaTi Refractory High-Entropy Alloy by Employing Fluidised Powders, Powder Metall., 2022, 65(5), p 413–425. https://doi.org/10.1080/00325899.2022.203171810.1080/00325899.2022.2031718 ↗
43. S.K. Makineni, A.R. Kini, E.A. Jägle, H. Springer, D. Raabe and B. Gault, Synthesis and Stabilization of a New Phase Regime in a Mo-Si-B Based Alloy by Laser-Based Additive Manufacturing, Acta Mater., 2018, 151, p 31–40. https://doi.org/10.1016/j.actamat.2018.03.03710.1016/j.actamat.2018.03.037 ↗
44. S.-H. Sun, K. Hagihara and T. Nakano, Effect of Scanning Strategy on Texture Formation in Ni-25at.%Mo Alloys Fabricated by Selective Laser Melting, Mater. Des., 2018, 140, p 307–316. https://doi.org/10.1016/j.matdes.2017.11.06010.1016/j.matdes.2017.11.060 ↗
45. D. Gu, M. Guo, H. Zhang, Y. Sun, R. Wang and L. Zhang, Effects of Laser Scanning Strategies on Selective Laser Melting of Pure Tungsten, Int. J. Extrem. Manuf., 2020, 2(2), p 25001. https://doi.org/10.1088/2631-7990/ab7b0010.1088/2631-7990/ab7b00 ↗
46. X. Dong, Y. Zhou, Q. Sun, Y. Qu, H. Shi, W. Liu, H. Peng, B. Zhang, S. Xu, J. Yan and N. Li, Fatigue Behavior of Biomedical Co-Cr-Mo-W Alloy Fabricated by Selective Laser Melting, Mater. Sci. Eng. A, 2020, 795, 140000.10.1016/j.msea.2020.140000 ↗
47. Z. Guo, L. Wang and X.Z. Wang, Additive Manufacturing of W-12Ta(Wt%) Alloy: Processing and Resulting Mechanical Properties, J. Alloys Compd., 2021, 868, p 159193. https://doi.org/10.1016/j.jallcom.2021.15919310.1016/j.jallcom.2021.159193 ↗
48. M. Liu, J. Zhang, C. Chen, Z. Geng, Y. Wu, D. Li, T. Zhang and Y. Guo, Additive Manufacturing of Pure Niobium by Laser Powder Bed Fusion: Microstructure, Mechanical Behavior and Oxygen Assisted Embrittlement, Mater. Sci. Eng. A, 2023, 866, 144691. https://doi.org/10.1016/j.msea.2023.14469110.1016/j.msea.2023.144691 ↗
49. J. Chen, W. Ding, Q. Tao, C. Ma, C. Zhang, G. Chen, M. Qin and X. Qu, Laser Powder Bed Fusion of a Nb-Based Refractory Alloy: Microstructure and Tensile Properties, Mater. Sci. Eng. A, 2022, 843, 143153. https://doi.org/10.1016/j.msea.2022.14315310.1016/j.msea.2022.143153 ↗
50. W. Wei, Y. Zhou, Q. Sun, N. Li, J. Yan, H. Li, W. Liu and C. Huang, Microstructures and Mechanical Properties of Dental Co-Cr-Mo-W Alloys Fabricated by Selective Laser Melting at Different Subsequent Heat Treatment Temperatures, Metall. Mater. Trans. A, 2020, 51, p 3205–3214.10.1007/s11661-020-05719-y ↗
51. H. Zhang, Y. Zhao, J. Cai, S. Ji, J. Geng, X. Sun and D. Li, High-Strength NbMoTaX Refractory High-Entropy Alloy with Low Stacking Fault Energy Eutectic Phase via Laser Additive Manufacturing, Mater. Des., 2021, 201, p 109462. https://doi.org/10.1016/j.matdes.2021.10946210.1016/j.matdes.2021.109462 ↗
52. J. Xu, R. Duan, K. Feng, C. Zhang, Q. Zhou, P. Liu and Z. Li, Enhanced Strength and Ductility of Laser Powder Bed Fused NbMoTaW Refractory High-Entropy Alloy via Carbon Microalloying, Addit. Manuf. Lett., 2022, 3, 100079. https://doi.org/10.1016/j.addlet.2022.10007910.1016/j.addlet.2022.100079 ↗
53. Q. Wu, J. Lu, C. Liu, H. Fan, X. Shi, J. Fu and S. Ma, Effect of Molten Pool Size on Microstructure and Tensile Properties of Wire Arc Additive Manufacturing of Ti-6Al-4V Alloy, Materials, 2017, 10, p 749.10.3390/ma10070749 ↗
54. J. Chen, D. Tian, X. Zhan, C. Qi and J. Zhou, Study on Grain Size of Deposition Layer in Single-Layer Laser Melting Deposition Additive Manufacturing on Invar Alloy, Opt. Eng., 2018, 58(4), p 41603. https://doi.org/10.1117/1.OE.58.4.04160310.1117/1.OE.58.4.041603 ↗
55. J. Wang, Y. Cui, C. Liu, Z. Li, Q. Wu and D. Fang, Understanding Internal Defects in Mo Fabricated by Wire Arc Additive Manufacturing through 3D Computed Tomography, J. Alloys Compd., 2020, 840, 155753. https://doi.org/10.1016/j.jallcom.2020.15575310.1016/j.jallcom.2020.155753 ↗
56. S. Islam, G.-J. Seo, M.R.U. Ahsan, H. Villarraga-Gómez, H.-J. Lee and D.B. Kim, Investigation of Microstructures, Defects, and Mechanical Properties of Titanium-Zirconium-Molybdenum Alloy Manufactured by Wire Arc Additive Manufacturing, Int. J. Refract. Met. Hard Mater., 2023, 110, 106042. https://doi.org/10.1016/j.ijrmhm.2022.10604210.1016/j.ijrmhm.2022.106042 ↗
57. Q. Li, H. Zhang, D. Li, Z. Chen, F. Wang and M. Wu, Comparative Study of the Microstructures and Mechanical Properties of Laser Metal Deposited and Vacuum Arc Melted Refractory NbMoTa Medium-Entropy Alloy, Int. J. Refract. Met. Hard Mater., 2020, 88, 105195. https://doi.org/10.1016/j.ijrmhm.2020.10519510.1016/j.ijrmhm.2020.105195 ↗
58. L. Zhou, S. Chen, M. Wei, J. Liang, C. Liu and M. Wang, Microstructure and Properties of 24CrNiMoY Alloy Steel Prepared by Direct Laser Deposited under Different Preheating Temperatures, Mater Charact, 2019, 158, 109931. https://doi.org/10.1016/j.matchar.2019.10993110.1016/j.matchar.2019.109931 ↗
59. A. Sadhu, A. Choudhary, S. Sarkar, A.M. Nair, P. Nayak, S.D. Pawar, G. Muvvala, S.K. Pal and A.K. Nath, A Study on the Influence of Substrate Pre-heating on Mitigation of Cracks in Direct Metal Laser Deposition of NiCrSiBC-60%WC Ceramic Coating on Inconel 718, Surf. Coat. Technol., 2020, 389, 125646. https://doi.org/10.1016/j.surfcoat.2020.12564610.1016/j.surfcoat.2020.125646 ↗
60. E. Molobi, N. Sacks and M. Theron, Crack Mitigation in Laser Engineered Net Shaping of WC-10wt%FeCr Cemented Carbides, Addit. Manuf. Lett., 2022, 2, 100028. https://doi.org/10.1016/j.addlet.2022.10002810.1016/j.addlet.2022.100028 ↗
61. N. Sargent, S. Firdosy, X. Wang, N. Ury, J.D. Poplawsky, R. Otis and W. Xiong, Discovery of Microsegregation-Aided Transformation and Twinning-Induced Plasticity in Low Mn Steel through Directed Energy Deposition of Functionally Graded Materials, Addit. Manuf., 2024, 85, 104154. https://doi.org/10.1016/j.addma.2024.10415410.1016/j.addma.2024.104154 ↗
62. J. Schmelzer, S.-K. Rittinghaus, A. Weisheit, M. Stobik, J. Paulus, K. Gruber, E. Wessel, C. Heinze and M. Krüger, Printability of Gas Atomized Mo-Si-B Powders by Laser Metal Deposition, Int. J. Refract. Met. Hard Mater., 2018, 78, p 123–126.10.1016/j.ijrmhm.2018.08.016 ↗
63. D. Preisler, T. Krajňák, M. Janeček, J. Kozlík, J. Stráský, M. Brázda and J. Džugan, Directed Energy Deposition of Bulk Nb-Ta-Ti-Zr Refractory Complex Concentrated Alloy, Mater. Lett., 2023, 337, 133980. https://doi.org/10.1016/j.matlet.2023.13398010.1016/j.matlet.2023.133980 ↗
64. Y. Sun, D. Gu, D. Dai, M. Guo, Q. Ge, X. Shi, Y. Li, G. Le and M. Yao, Thermal Behavior and Microstructure Evolution Mechanism of W-20%Fe Alloy Fabricated by Laser Metal Deposition, Int. J. Mech. Sci., 2020, 183, 105772. https://doi.org/10.1016/j.ijmecsci.2020.10577210.1016/j.ijmecsci.2020.105772 ↗
65. I. Goncharov, D. Masaylo, A. Orlov, N. Razumov and A. Obrosov, The Effect of Laser Power on the Microstructure of the Nb-Si Based In Situ Composite, Fabricated by Laser Metal Deposition, Key Eng. Mater., 2019, 822, p 556–562.10.4028/www.scientific.net/KEM.822.556 ↗
66. C. Li, S. Ma, X. Liu, J. Li and G. Le, Microstructures and Properties of 80W-20Fe Alloys Prepared Using Laser Melting Deposition Process, Int. J. Refract. Met. Hard Mater., 2018, 77, p 113–119. https://doi.org/10.1016/j.ijrmhm.2018.08.00510.1016/j.ijrmhm.2018.08.005 ↗
67. H. Dobbelstein, E.L. Gurevich, E.P. George, A. Ostendorf and G. Laplanche, Laser Metal Deposition of a Refractory TiZrNbHfTa High-Entropy Alloy, Addit. Manuf., 2018, 24, p 386–390. https://doi.org/10.1016/j.addma.2018.10.00810.1016/j.addma.2018.10.008 ↗
68. Y. Li, X. Lin, Y. Hu, N. Kang, X. Gao, H. Dong and W. Huang, Zirconium Modified Nb-22Ti-16Si Alloys Fabricated by Laser Additive Manufacturing: Microstructure and Fracture Toughness, J. Alloys Compd., 2019, 783, p 66–76. https://doi.org/10.1016/j.jallcom.2018.12.28010.1016/j.jallcom.2018.12.280 ↗
69. Y. Tian, X. Chen, Y. Cai, Z. Luo, M. Chen, X. Zhang, J. Li and J. Han, Microstructure and Properties of a Ni-Ti-Cr-Mo-Nb Alloy Fabricated in Situ by Dual-Wire Arc Additive Manufacturing, Mater. Sci. Eng. A, 2022, 853, 143740. https://doi.org/10.1016/j.msea.2022.14374010.1016/j.msea.2022.143740 ↗
70. C. Wei, H. Ye, Z. Zhao, J. Tang, X. Shen, G. Le, K. Ye and F. Le, Microstructure and Fracture Behavior of 90W-7Ni-3Fe Alloy Fabricated by Laser Directed Energy Deposition, J. Alloys Compd., 2021, 865, 158975. https://doi.org/10.1016/j.jallcom.2021.15897510.1016/j.jallcom.2021.158975 ↗
71. M. Moorehead, K. Bertsch, M. Niezgoda, C. Parkin, M. Elbakhshwan, K. Sridharan, C. Zhang, D. Thoma and A. Couet, High-Throughput Synthesis of Mo-Nb-Ta-W High-Entropy Alloys via Additive Manufacturing, Mater. Des., 2020, 187, p 108358. https://doi.org/10.1016/j.matdes.2019.10835810.1016/j.matdes.2019.108358 ↗
72. M.A. Melia, S.R. Whetten, R. Puckett, M. Jones, M.J. Heiden, N. Argibay and A.B. Kustas, High-Throughput Additive Manufacturing and Characterization of Refractory High Entropy Alloys, Appl. Mater. Today, 2020, 19, 100560. https://doi.org/10.1016/j.apmt.2020.10056010.1016/j.apmt.2020.100560 ↗
73. J. Milberg and M. Sigl, Electron Beam Sintering of Metal Powder, Prod. Eng., 2008, 2(2), p 117–122.10.1007/s11740-008-0088-2 ↗
74. C. Körner, Additive Manufacturing of Metallic Components by Selective Electron Beam Melting—A Review, Int. Mater. Rev., 2016, 61(5), p 361–377.10.1080/09506608.2016.1176289 ↗
75. B. Xiao, W. Jia, H. Tang, J. Wang and L. Zhou, Microstructure and Mechanical Properties of WMoTaNbTi Refractory High-Entropy Alloys Fabricated by Selective Electron Beam Melting, J. Mater. Sci. Technol., 2022, 108, p 54–63. https://doi.org/10.1016/j.jmst.2021.07.04110.1016/j.jmst.2021.07.041 ↗
76. C. Rock, E. Lara-Curzio, B. Ellis, C. Ledford, D.N. Leonard, R. Kannan, M. Kirka and T. Horn, Additive Manufacturing of Pure Mo and Mo + TiC MMC Alloy by Electron Beam Powder Bed Fusion, JOM, 2020, 72(12), p 4202–4213. https://doi.org/10.1007/s11837-020-04442-810.1007/s11837-020-04442-8 ↗
77. G. Yang, H. Tang, N. Liu, W. Jia, L. Jia, K. Yang and J. Wang, Defect and Microstructure of W-Nb Alloy Fabricated by Selective Electron Beam Melting, Mater. Rep., 2021, 35(Z2), p 448–451.
78. L. Zhou, T. Yuan, R. Li, J. Tang, G. Wang and K. Guo, Selective Laser Melting of Pure Tantalum: Densification, Microstructure and Mechanical Behaviors, Mater. Sci. Eng. A, 2017, 707, p 443–451. https://doi.org/10.1016/j.msea.2017.09.08310.1016/j.msea.2017.09.083 ↗
79. M. Zhang, X. Zhou, D. Wang, W. Zhu, J. Li and Y.F. Zhao, AlCoCuFeNi High-Entropy Alloy with Tailored Microstructure and Outstanding Compressive Properties Fabricated via Selective Laser Melting with Heat Treatment, Mater. Sci. Eng. A, 2019, 743, p 773–784. https://doi.org/10.1016/j.msea.2018.11.11810.1016/j.msea.2018.11.118 ↗
80. E. Chauvet, P. Kontis, E.A. Jägle, B. Gault, D. Raabe, C. Tassin, J.-J. Blandin, R. Dendievel, B. Vayre, S. Abed and G. Martin, Hot Cracking Mechanism Affecting a Non-Weldable Ni-Based Superalloy Produced by Selective Electron Beam Melting, Acta Mater., 2018, 142, p 82–94. https://doi.org/10.1016/j.actamat.2017.09.04710.1016/j.actamat.2017.09.047 ↗
81. S. Kou, Solidification and Liquation Cracking Issues in Welding, JOM, 2003, 55(6), p 37–42. https://doi.org/10.1007/s11837-003-0137-410.1007/s11837-003-0137-4 ↗
82. J.N. Dupont, C.V. Robino, J.R. Michael, R.E. Mizia and D.B. Williams, Physical and Welding Metallurgy of Gd-Enriched Austenitic Alloys for Spent Nuclear Fuel Applications. Part II, Nickel Base Alloys, Weld. J., 2004, 83, p 289.
83. W. Wei, J.C. Xiao, C.F. Wang, Q. Cheng, F.J. Guo, Q. He, M.S. Wang, S.Z. Jiang and C.X. Huang, Hierarchical Microstructure and Enhanced Mechanical Properties of SLM-Fabricated GH5188 Co-Superalloy, Mater. Sci. Eng. A, 2022, 831, 142276. https://doi.org/10.1016/j.msea.2021.14227610.1016/j.msea.2021.142276 ↗
84. Y. Gui, K. Aoyagi, H. Bian and A. Chiba, Machine-Learning-Assisted Development of Carbon Steel With Superior Strength and Ductility Manufactured by Electron Beam Powder Bed Fusion, Metall. Mater. Trans. A, 2024, 55(1), p 320–334. https://doi.org/10.1007/s11661-023-07251-110.1007/s11661-023-07251-1 ↗
85. E.A.I. Ellis, M.A. Sprayberry, C. Ledford, J.P. Hankwitz, M.M. Kirka, C.D. Rock, T.J. Horn, Y. Katoh and R.R. Dehoff, Processing of Tungsten through Electron Beam Melting, J. Nucl. Mater., 2021, 555, 153041. https://doi.org/10.1016/j.jnucmat.2021.15304110.1016/j.jnucmat.2021.153041 ↗
86. I. Konyashin, H. Hinners, B. Ries, A. Kirchner, B. Kloeden, B. Kieback, R.W.N. Nilen and D. Sidorenko, Additive Manufacturing of WC-13%Co by Selective Electron Beam Melting: Achievements and Challenges, Int. J. Refract. Met. Hard Mater., 2019, 84, 105028.10.1016/j.ijrmhm.2019.105028 ↗
87. P. Fernandez-Zelaia, C. Ledford, E.A.I. Ellis, Q. Campbell, A.M. Rossy, D.N. Leonard and M.M. Kirka, Crystallographic Texture Evolution in Electron Beam Melting Additive Manufacturing of Pure Molybdenum, Mater. Des., 2021, 207, 109809. https://doi.org/10.1016/j.matdes.2021.10980910.1016/j.matdes.2021.109809 ↗
88. G. Yang, P. Yang, K. Yang, N. Liu, L. Jia, J. Wang and H. Tang, Effect of Processing Parameters on the Density, Microstructure and Strength of Pure Tungsten Fabricated by Selective Electron Beam Melting, Int. J. Refract. Met. Hard Mater., 2019, 84, 105040. https://doi.org/10.1016/j.ijrmhm.2019.10504010.1016/j.ijrmhm.2019.105040 ↗
89. G. Yang, W. Jia, J. Wang, N. Liu and L. Jia, Refined W-3.5Nb Alloy Fabricated by Electron Beam Melting via Doped Carbon, Int. J. Refract. Met. Hard Mater., 2023, 111, p 106094. https://doi.org/10.1016/j.ijrmhm.2022.10609410.1016/j.ijrmhm.2022.106094 ↗
90. C. Tan, Q. Li, X. Yao, L. Chen, J. Su, F.L. Ng, Y. Liu, T. Yang, Y. Chew, C.T. Liu and T. DebRoy, Machine Learning Customized Novel Material for Energy-Efficient 4D Printing, Adv. Sci., 2023, 10(10), p 2206607. https://doi.org/10.1002/advs.20220660710.1002/advs.202206607 ↗
91. J. Yin, Z. Rao, D. Wu, H. Lv, H. Ma, T. Long, J. Kang, Q. Wang, Y. Wang and R. Su, Interpretable Predicting Creep Rupture Life of Superalloys: Enhanced by Domain-Specific Knowledge, Adv. Sci., 2024 https://doi.org/10.1002/advs.20230798210.1002/advs.202307982 ↗
92. Q. Liu, H. Wu, M.J. Paul, P. He, Z. Peng, B. Gludovatz, J.J. Kruzic, C.H. Wang and X. Li, Machine-Learning Assisted Laser Powder Bed Fusion Process Optimization for AlSi10Mg: New Microstructure Description Indices and Fracture Mechanisms, Acta Mater., 2020, 201, p 316–328. https://doi.org/10.1016/j.actamat.2020.10.01010.1016/j.actamat.2020.10.010 ↗
93. Z. Ren, L. Gao, S.J. Clark, K. Fezzaa, P. Shevchenko, A. Choi, W. Everhart, A.D. Rollett, L. Chen and T. Sun, Machine Learning-Aided Real-Time Detection of Keyhole Pore Generation in Laser Powder Bed Fusion, Science, 2023, 379(6627), p 89–94. https://doi.org/10.1126/science.add466710.1126/science.add4667 ↗