Microstructure Refinement and Augmenting Mechanical Properties of Mg Alloy Using Friction Stir Processing
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. F. Xing et al., Recent Progress in Mg-Based Alloys as a Novel Bioabsorbable Biomaterials for Orthopedic Applications, J. Magnes. Alloys, 2022, 10(6), p 1428–1456. https://doi.org/10.1016/j.jma.2022.02.01310.1016/j.jma.2022.02.013 ↗
2. S. Mand et al., Assessment of Regional Sacral Bone Quality: A Step Towards Patient-Specific Fracture Fixation, J. Orthop. Res., 2023, 41(1), p 141–149.10.1002/jor.25329 ↗
3. K. Kumar, R.S. Gill, and U. Batra, Challenges and Opportunities for Biodegradable Magnesium Alloy Implants, Mater. Technol., 2018, 33(2), p 153–172. https://doi.org/10.1080/10667857.2017.137797310.1080/10667857.2017.1377973 ↗
4. N. Singh, U. Batra, K. Kumar, and A. Mahapatro, Evaluation of Corrosion Resistance, Mechanical Integrity Loss and Biocompatibility of PCL/HA/TiO2 Hybrid Coated Biodegradable ZM21 Mg Alloy, J. Magnes. Alloys, 2022, 10(11), p 3179–3204. https://doi.org/10.1016/j.jma.2021.10.00410.1016/j.jma.2021.10.004 ↗
5. K. Wei et al., Grain Size Effect on Tensile Properties and Slip Systems of Pure Magnesium, Acta Mater., 2021, 206, p 116604.10.1016/j.actamat.2020.116604 ↗
6. M. Gao et al., Influence of Microstructure Modification on Corrosion Resistance of Friction Stir Processing Biodegradable Mg-Zn-Nd Alloy, Mater. Technol., 2022, 37(1), p 57–62. https://doi.org/10.1080/10667857.2020.180778810.1080/10667857.2020.1807788 ↗
7. C. Liu, H. Zheng, X. Gu, B. Jiang, and J. Liang, Effect of Severe Shot Peening on Corrosion Behavior of AZ31 and AZ91 Magnesium Alloys, J. Alloys Compd., 2019, 770, p 500–506. https://doi.org/10.1016/j.jallcom.2018.08.14110.1016/j.jallcom.2018.08.141 ↗
8. H. Du et al., Hydroxyapatite (HA) Modified Nanocoating Enhancement on AZ31 Mg Alloy by Combined Surface Mechanical Attrition Treatment and Electrochemical Deposition Approach, J. Nanosci. Nanotechnol., 2018, 19(2), p 810–818. https://doi.org/10.1166/jnn.2019.1574610.1166/jnn.2019.15746 ↗
9. N.S. Grewal, G.K. Sharma, K. Kumar, and U. Batra, Thermally and Mechanically Tuned Interfaces of Magnesium Alloys for Bioimplant Applications, Surf. Interfaces, 2023, 41, p 103284. https://doi.org/10.1016/j.surfin.2023.10328410.1016/j.surfin.2023.103284 ↗
10. J. Cai, H. Wang, C. Qiu, G. Cao, and D. Zhang, Excellent High-Strain-Rate Superplasticity of Fine-Grained ZK60 Magnesium Alloy Produced by Submerged Friction Stir Processing, Adv. Eng. Mater., 2023, 25(5), p 2101268. https://doi.org/10.1002/adem.20210126810.1002/adem.202101268 ↗
11. H. Mirzadeh, Grain Refinement of Magnesium Alloys by Dynamic Recrystallization (DRX): A Review, J. Mater. Res. Technol., 2023, 25, p 7050–7077. https://doi.org/10.1016/j.jmrt.2023.07.15010.1016/j.jmrt.2023.07.150 ↗
12. K. Singh, G. Singh, and H. Singh, Review on Friction Stir Welding of Magnesium Alloys, J Magnes Alloys, 2018, 6(4), p 399–416. https://doi.org/10.1016/j.jma.2018.06.00110.1016/j.jma.2018.06.001 ↗
13. F. Khodabakhshi, S.M. Arab, P. Švec, and A.P. Gerlich, Fabrication of a New Al-Mg/Graphene Nanocomposite by Multi-pass Friction-Stir Processing: Dispersion, Microstructure, Stability, and Strengthening, Mater Charact, 2017, 132, p 92–107. https://doi.org/10.1016/j.matchar.2017.08.00910.1016/j.matchar.2017.08.009 ↗
14. S. Ahmed, M.V. Malik, and B. Ahmad, Surface Moderation and Composite Fabrication of Die-Cast Magnesium Alloys via Friction Stir Processing: A Review, Adv. Mater. Process. Technol., 2021 https://doi.org/10.1080/2374068X.2021.197099810.1080/2374068X.2021.1970998 ↗
15. N. Xu, J. Shen, D. Wang, Q.N. Song, J.H. Zhao, and Y.F. Bao, Tensile Property Response of AZ91 Mg Alloy Subjected to Pre-aging and High-Force Friction Stir Processing, Mater. Sci. Eng., A, 2022, 841, p 143033. https://doi.org/10.1016/j.msea.2022.14303310.1016/j.msea.2022.143033 ↗
16. Y. Zhen, J. Shen, S. Hu, C. Yin, F. Yin, and X. Bu, Effect of Rotation Rate on Microstructure and Mechanical Properties of CMT Cladding Layer of AZ91 Magnesium Alloy Fabricated by Friction Stir Processing, J. Manuf. Process., 2022, 79, p 553–561. https://doi.org/10.1016/j.jmapro.2022.05.01710.1016/j.jmapro.2022.05.017 ↗
17. W. Wang et al., Friction Stir Processing of Magnesium Alloys: A Review, Acta Metall. Sinica (Engl. Lett.), 2020, 33(1), p 43–57. https://doi.org/10.1007/s40195-019-00971-710.1007/s40195-019-00971-7 ↗
18. T. Satish Kumar, S. Shalini, and T. Thankachan, Friction Stir Processing Based Surface Modification of AZ31 Magnesium Alloy, Mater. Manuf. Process, 2023, 38, p 1426–1435. https://doi.org/10.1080/10426914.2023.216567010.1080/10426914.2023.2165670 ↗
19. Y. Hu, Y. Sun, J. He, D. Fang, J. Zhu, and X. Meng, Effect of Friction Stir Processing Parameters on the Microstructure and Properties of ZK60 Magnesium Alloy, Mater Res Express, 2022, 9(1), p 016508. https://doi.org/10.1088/2053-1591/ac475e10.1088/2053-1591/ac475e ↗
20. Z. Nasiri, M. Sarkari Khorrami, H. Mirzadeh, and M. Emamy, Enhanced Mechanical Properties of as-Cast Mg-Al-Ca Magnesium Alloys by Friction Stir Processing, Mater Lett, 2021, 296, p 129880. https://doi.org/10.1016/j.matlet.2021.12988010.1016/j.matlet.2021.129880 ↗
21. M. Venkataiah, T. Anup Kumar, K. Venkata Rao, S. Anand Kumar, I. Siva, and B. Ratna-Sunil, Effect of Grain Refinement on Corrosion Rate, Mechanical and Machining Behavior of Friction Stir Processed ZE41 Mg Alloy, Trans. Indian Inst. Met., 2019, 72(1), p 123–132. https://doi.org/10.1007/s12666-018-1467-910.1007/s12666-018-1467-9 ↗
22. S. Joshi, R.C. Singh, and R. Chaudhary, Effect of Rotational Speed in Friction Stir Processing on the Microstructural and Mechanical Characteristics of Cast AS21A Magnesium Alloy, Mater. Res. Express., 2019, 6(5), p 056554. https://doi.org/10.1088/2053-1591/ab063310.1088/2053-1591/ab0633 ↗
23. S.S.M. Mehrian, M. Rahsepar, F. Khodabakhshi, and A.P. Gerlich, Effects of Friction Stir Processing on the Microstructure, Mechanical and Corrosion Behaviors of an Aluminum–Magnesium Alloy, Surf. Coat. Technol., 2021, 405, p 126647. https://doi.org/10.1016/j.surfcoat.2020.12664710.1016/j.surfcoat.2020.126647 ↗
24. J. Iwaszko and K. Kudła, Microstructure, Hardness, and Wear Resistance of AZ91 Magnesium Alloy Produced by Friction Stir Processing with Air-Cooling, Int. J. Adv. Manufact. Technol., 2021, 116, p 1309–1323. https://doi.org/10.1007/s00170-021-07474-9/Published10.1007/s00170-021-07474-9/Published ↗
25. V. Patel, W. Li, J. Andersson, and N. Li, Enhancing Grain Refinement and Corrosion Behavior in AZ31B Magnesium Alloy via Stationary Shoulder Friction Stir Processing, J. Market. Res., 2022, 17, p 3150–3156. https://doi.org/10.1016/j.jmrt.2022.02.05910.1016/j.jmrt.2022.02.059 ↗
26. H. Seifiyan, M. Heydarzadeh Sohi, M. Ansari, D. Ahmadkhaniha, and M. Saremi, Influence of friction stir processing conditions on corrosion behavior of AZ31B magnesium alloy, J. Magnes. Alloys, 2019, 7(4), p 605–616. https://doi.org/10.1016/j.jma.2019.11.00410.1016/j.jma.2019.11.004 ↗
27. Q. Liu, G. Qiang Chen, S. Bo Zeng, S. Zhang, F. Long, and Q. Yu Shi, The Corrosion Behavior of Mg-9Al-xRE Magnesium Alloys Modified by Friction Stir Processing, J. Alloys Compd., 2021, 851, p 156835. https://doi.org/10.1016/j.jallcom.2020.15683510.1016/j.jallcom.2020.156835 ↗
28. N. Saikrishna, G. Pradeep Kumar Reddy, B. Munirathinam, and B. Ratna Sunil, Influence of Bimodal Grain Size Distribution on the Corrosion Behavior of Friction Stir Processed Biodegradable AZ31 Magnesium Alloy, J. Magnes. Alloys, 2016, 4(1), p 68–76. https://doi.org/10.1016/j.jma.2015.12.00410.1016/j.jma.2015.12.004 ↗
29. J. Yu, J. Wang, Q. Li, J. Shang, J. Cao, and X. Sun, Effect of Zn on Microstructures and Properties of Mg-Zn Alloys Prepared by Powder Metallurgy Method, Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Mater. Eng., 2016, 45(11), p 2757–2762. https://doi.org/10.1016/s1875-5372(17)30035-810.1016/s1875-5372(17)30035-8 ↗
30. H. Du, Z. Wei, X. Liu, and E. Zhang, Effects of Zn on the Microstructure, Mechanical Property and Bio-corrosion Property of Mg-3Ca Alloys for Biomedical Application, Mater. Chem. Phys., 2011, 125(3), p 568–575. https://doi.org/10.1016/j.matchemphys.2010.10.01510.1016/j.matchemphys.2010.10.015 ↗
31. T. Kokubo and H. Takadama, How Useful is SBF in Predicting In Vivo Bone Bioactivity?, Biomaterials, 2006, 27(15), p 2907–2915. https://doi.org/10.1016/j.biomaterials.2006.01.01710.1016/j.biomaterials.2006.01.017 ↗
32. K. Jangra, S. Grover, and A. Aggarwal, Simultaneous Optimization of Material Removal Rate and Surface Roughness for WEDM of WCCo Composite using Grey Relational Analysis Along with Taguchi Method, Int. J. Ind. Eng. Comput., 2011, 2(3), p 479–490. https://doi.org/10.5267/j.ijiec.2011.04.00510.5267/j.ijiec.2011.04.005 ↗
33. X.C. Luo et al., Enhancing Mechanical Properties of AZ61 Magnesium Alloy via Friction Stir Processing: Effect of Processing Parameters, Mater. Sci. Eng. A, 2020, 797, p 139945. https://doi.org/10.1016/j.msea.2020.13994510.1016/j.msea.2020.139945 ↗
34. L. Commin, M. Dumont, J.E. Masse, and L. Barrallier, Friction Stir Welding of AZ31 Magnesium Alloy Rolled Sheets: Influence of Processing Parameters, Acta Mater., 2009, 57(2), p 326–334. https://doi.org/10.1016/j.actamat.2008.09.01110.1016/j.actamat.2008.09.011 ↗
35. G. Girish, Effect of Tool Pin Geometry and Multi-pass Intermittent Friction Stir Processing on the Surface Properties of Aerospace Grade Aluminium 7075 Alloy, Proc. Inst. Mech. Eng. Part E. J. Process Mech. Eng., 2023, 87, p 8. https://doi.org/10.1177/0954408923115894810.1177/09544089231158948 ↗
36. S. Zhang, Q. Shi, Q. Liu, R. Xie, G. Zhang, and G. Chen, Effects of Tool Tilt Angle on the in-Process Heat Transfer and Mass Transfer during Friction Stir Welding, Int. J. Heat Mass Transf., 2018, 125, p 32–42. https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.06710.1016/j.ijheatmasstransfer.2018.04.067 ↗
37. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R. Rep., 2005, 50(1–2), p 1–78. https://doi.org/10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
38. M. Vigneshkumar, G. Padmanaban, and V. Balasubramanian, Influence of Tool Tilt Angle on the Formation of Friction Stir Processing Zone in Cast Magnesium Alloy ZK60/SiCp Surface Composites, Metallogr Microstruct Anal, 2019, 8(1), p 58–66. https://doi.org/10.1007/s13632-018-0507-510.1007/s13632-018-0507-5 ↗
39. S.S. Kumar, N. Murugan, and K.K. Ramachandran, Effect of Tool Tilt Angle on Weld Joint Properties of Friction Stir Welded AISI 316L Stainless Steel Sheets, Meas Lond, 2020, 150, p 107083. https://doi.org/10.1016/j.measurement.2019.10708310.1016/j.measurement.2019.107083 ↗
40. K. Jangra, S. Grover, and A. Aggarwal, Optimization of Multi Machining Characteristics in WEDM of WC-5.3%Co Composite using Integrated Approach of Taguchi, GRA and Entropy Method, Front. Mech. Eng., 2012, 7(3), p 288–299. https://doi.org/10.1007/s11465-012-0333-410.1007/s11465-012-0333-4 ↗
41. W. Yuan, S.K. Panigrahi, and R.S. Mishra, Achieving High Strength and High Ductility in Friction Stir-Processed Cast Magnesium Alloy, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2013, 44(8), p 3675–3684. https://doi.org/10.1007/s11661-013-1744-510.1007/s11661-013-1744-5 ↗
42. F. Long, G. Chen, M. Zhou, Q. Shi, and Q. Liu, Simultaneous Enhancement of Mechanical Properties and Corrosion Resistance of as-Cast Mg-5Zn via Microstructural Modification by Friction Stir Processing, J. Magnes. Alloys, 2023, 11(6), p 1931–1943. https://doi.org/10.1016/j.jma.2021.08.02910.1016/j.jma.2021.08.029 ↗
43. D. Harwani, V. Badheka, and V. Patel, High Temperature Tensile Deformation in Single-Pass Friction Stirred AZ31 Alloy, Int. J. Light. Mater. Manuf., 2023, 6(1), p 140–148. https://doi.org/10.1016/j.ijlmm.2022.09.00310.1016/j.ijlmm.2022.09.003 ↗
44. T. Sun et al., Correlation Between Microstructure, Tribology and Corrosion Behaviors of Mg-Al-Zn Alloy via Creating Fine and Uniform Twins Through Submerged Friction Stir Processing, Mater Charact, 2023, 206, p 113375. https://doi.org/10.1016/j.matchar.2023.11337510.1016/j.matchar.2023.113375 ↗