Mechanical and Wear Properties of Graphite Reinforced Aluminum Metal Matrix Composites Processed by Ultrasonic-Stir-Squeeze Casting
Source abstract
Abstract
In the present study, the researchers have utilized graphite as the reinforced phase of the aluminum metal matrix nanocomposites (AMMNCs) owing to its high strength and lubricating properties. The AMMNCs are processed through combined ultrasonic-stir-squeeze casting process to ensure homogeneity of the reinforced phase in the matrix while minimizing the porosity of the cast ingot. The phase and microstructure of the developed AMMNCs are investigated through characterization techniques such as x-ray diffraction and Field Emission Scanning Electron Microscopy. AMMNCs exhibit lower density in comparison with the as-cast aluminum alloy (AA2014). Hardness of the composites have improved due to addition of the reinforcement, but adversely the porosity also increases with the increase in concentration of graphite. The tribological properties of the AMMNCs are investigated under dry condition and compared with that of the as-cast AA2014. Addition of graphite improves the wear properties of the AMMNCs. However, parameters like concentration of graphite and applied load affect the wear rate considerably. Post-tribological characterization of the wear scars provide detailed information on the influence of hardness and elastic modulus on the tribological properties of the AMMNCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. D. Roy, S. Chakraborty, A.K. Gupta, A. BasuMallick, R.O. Scattergood, and C.C. Koch, Synergistic Effect of Nb and Zr Additions on the Structure-Property Relationships of Nanocrystalline Cu Processed by Mechanical Alloying and Hot Pressing, J. Alloys Compd., 2021, 854, p 157174. https://doi.org/10.1016/j.jallcom.2020.15717410.1016/j.jallcom.2020.157174 ↗
2. D. Roy, S. Chakraborty, A.K. Gupta, A. Basu Mallick, and C.C. Koch, Synergistic Effect of Nb and Zr Addition in Thermal Stabilization of Nano-Crystalline Cu Synthesized by Ball Milling, Mater. Lett., 2020, 271, p 127780. https://doi.org/10.1016/j.matlet.2020.12778010.1016/j.matlet.2020.127780 ↗
3. S. Chakraborty, A.K. Gupta, D. Roy, and A. Basumallick, Studies on Nano-Metal Dispersed Cu-Cr Matrix Composite, Mater. Lett., 2019, 257, p 126739. https://doi.org/10.1016/j.matlet.2019.12673910.1016/j.matlet.2019.126739 ↗
4. D. Roy, S. Pal, C.S. Tiwary, A.K. Gupta, P.N. Babu, and R. Mitra, Stable Nanocrystalline Structure Attainment and Strength Enhancement of Cu Base Alloy Using Bi-Modal Distributed Tungsten Dispersoids, Philos. Mag., 2022, 102(3), p 189–209. https://doi.org/10.1080/14786435.2021.198817310.1080/14786435.2021.1988173 ↗
5. S. Chakraborty, A.K. Gupta, D. Roy, and A. Basu Mallick, Nanomechanical Properties of Mechanically Alloyed and Spark Plasma Sintered W-Nanoparticulate Dispersed Cu-Nb Alloys, Mater. Lett., 2020, 274, p 128004. https://doi.org/10.1016/j.matlet.2020.12800410.1016/j.matlet.2020.128004 ↗
6. M.A. Herbert, C. Sarkar, R. Mitra, and M. Chakraborty, Microstructural Evolution, Hardness, and Alligatoring in the Mushy State Rolled Cast Al-4.5Cu Alloy, Metall. Mater. Trans. A, 2007, 38A, p 2110–2126.10.1007/s11661-007-9264-9 ↗
7. S. Ganguly, S.T. Reddy, J. Majhi, P. Nasker and A.K. Mondal, Enhancing Mechanical Properties of Squeeze-Cast AZ91 Magnesium Alloy by Combined Additions of Sb and SiC Nanoparticles, Mater. Sci. Eng. A, 2021, 799, p 140341. https://doi.org/10.1016/j.msea.2020.14034110.1016/j.msea.2020.140341 ↗
8. K.T.S. Surendran and A. Gnanavelbabu, Tribological Performance of AZ91D/HfC p Magnesium Composite Prepared through Stir-Ultrasonic-Squeeze Casting Technique, Proc. IMech Part E J. Process Mech. Eng., 2022, p 1–1410.1177/09544089221132732 ↗
9. A.O. Inegbenebor, C.A. Bolu, P.O. Babalola, A.I. Inegbenebor, and O.S.I. Fayomi, Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing, SILICON, 2018, 10(2), p 343–347.10.1007/s12633-016-9451-7 ↗
10. P. Madhukar, N. Selvaraj, R. Gujjala, C. Surya, and P. Rao, Production of High Performance AA7150-1 % SiC Nanocomposite by Novel Fabrication Process of Ultrasonication Assisted Stir Casting, Ultrason. Sonochem., 2019, 58, p 104665. https://doi.org/10.1016/j.ultsonch.2019.10466510.1016/j.ultsonch.2019.104665 ↗
11. K.A. Babu, P. Venkataramaiah, and K.D. Reddy, Mechanical Characterization of Aluminium Hybrid Metal Matrix Composites Synthesized by Using Stir Casting Process, Mater. Today Proc., 2018, 5(14), p 28155–28163. https://doi.org/10.1016/j.matpr.2018.10.05810.1016/j.matpr.2018.10.058 ↗
12. G.F. Aynalem, Processing Methods and Mechanical Properties of Aluminium, Adv. Mater. Sci. Eng., 2020, 2020, p 3765791.10.1155/2020/3765791 ↗
13. Q. Wu and P. Cai, Effect of Content and Size of Reinforcements on the Grain Evolution of Graphene-Reinforced Aluminum Matrix Composites, Nanomaterials, 2021, 11, p 2550.10.3390/nano11102550 ↗
14. P. Paulraj and R. Harichandran, The Tribological Behavior of Hybrid Aluminum Alloy Nanocomposites at High Temperature: Role of Nanoparticles, Integr. Med. Res., 2024, 9(5), p 11517–11530. https://doi.org/10.1016/j.jmrt.2020.08.04410.1016/j.jmrt.2020.08.044 ↗
15. D.M. Shinde, P. Sahoo, and J.P. Davim, Tribological Characterization of Particulate-Reinforced Aluminum Metal Matrix Nanocomposites: A Review, Adv. Compos. Lett., 2020, 29, p 1–28.10.1177/2633366X20921403 ↗
16. J. Zhu, W. Jiang, G. Li, F. Guan, Y. Yu, and Z. Fan, Microstructure and Mechanical Properties of SiC Np / Al6082 Aluminum Matrix Composites Prepared by Squeeze Casting Combined with Stir Casting, J. Mater. Process. Tech., 2020, 283, p 116699. https://doi.org/10.1016/j.jmatprotec.2020.11669910.1016/j.jmatprotec.2020.116699 ↗
17. L.G. Babu, M. Ramesh, and M. Ravichandran, Mechanical and Tribological Characteristics of ZrO2 Reinforced Al2O14 Matrix Composites Produced via Stir Casting Route, Mater. Res. Express, 2019, 6, p 115542.10.1088/2053-1591/ab4fc1 ↗
18. A. Bakr, V. Tirth, and E. El-kashif, Characterization and Mechanical Properties of Stir- Rheo-Squeeze Cast AA5083 / MWCNTs / GNs Hybrid Nanocomposites Developed Using a Novel Preform- Billet Method, J. Mater. Res. Technol., 2021, 10, p 1195–1209. https://doi.org/10.1016/j.jmrt.2020.12.07910.1016/j.jmrt.2020.12.079 ↗
19. A. Mazahery, M. Alizadeh, and M.O. Shabani, Study of Tribological and Mechanical Properties of A356—Nano SiC Composites, Trans. Indian Inst. Met., 2012, 65(4), p 393–398.10.1007/s12666-012-0143-8 ↗
20. Elisabetta Gariboldi, Metal Matrix Composites: Discontinuously Reinforced, Microstructure and Mechanical Property Correlations. Wiley Encycl. Compos., (2012) p 1–1610.1002/9781118097298.weoc142 ↗
21. S. Lal, S. Kumar, A. Kumar, L. Patel, and Aniruddha, Fabrication and Characterization of Hybrid Metal Matrix Composite Al-2014/SiC/Fly Ash Fabricated Using Stir Casting Process, Mater. Today Proc., 2020, 49, p 3155–3163. https://doi.org/10.1016/j.matpr.2020.11.16810.1016/j.matpr.2020.11.168 ↗
22. H.Z. Ye and X.Y. Liu, Review of Recent Studies in Al Matrix Composites, Int. J. Sci. Eng. Res., 2012, 3(6), p 1–16.
23. L. Zhang, F. Qiu, J. Wang, H.-Y. Wang, and Q.-C. Jiang, Microstructures and Mechanical Properties of the Al2014 Composites Reinforced with Bimo- Dal Sized SiC Particles, Mater. Sci. Eng. A, 2015, 637, p 70–74. https://doi.org/10.1016/j.msea.2015.04.01210.1016/j.msea.2015.04.012 ↗
24. A. Thirugnanasambandam, T. Selvakumaran, R. Subbiah, K. Ramachandran, and S. Manickam, Development of High-Performance Aluminium 6061/SiC Nanocomposites by Ultrasonic Aided Rheo-Squeeze Casting Method, Ultrason. Sonochem., 2021, 76, p 105631. https://doi.org/10.1016/j.ultsonch.2021.10563110.1016/j.ultsonch.2021.105631 ↗
25. P. Madhukar, N. Selvaraj, C.S.P. Rao, and G.B.V. Kumar, Enhanced Performance of AA7150-SiC Nanocomposites Synthesized by Novel Fabrication Process, Ceram. Int., 2020, 46(10), p 17103–17111. https://doi.org/10.1016/j.ceramint.2020.04.00710.1016/j.ceramint.2020.04.007 ↗
26. A. Alizadeh, A. Khayami, M. Karamouz, and M. Hajizamani, Mechanical Properties and Wear Behavior of Al5083 Matrix Composites Reinforced with High Amounts of SiC Particles Fabricated by Combined Stir Casting and Squeeze Casting; A Comparative Study, Ceram. Int., 2022, 48(1), p 179–189. https://doi.org/10.1016/j.ceramint.2021.09.09310.1016/j.ceramint.2021.09.093 ↗
27. S.N. Alam and L. Kumar, Aluminium Based Metal Matrix Composites Reinforced with Graphite Nanoplatelets, Mater. Sci. Eng. A, 2016, 667, p 16–32. https://doi.org/10.1016/j.msea.2016.04.05410.1016/j.msea.2016.04.054 ↗
28. S. Mosleh-shirazi, F. Akhlaghi, and D.Y. Li, Effect of Graphite Content on the Wear Behavior of Al/2SiC/Gr Hybrid Nano-Composites Respectively in the Ambient Environment and an Acidic Solution, Tribol. Int., 2016, 103, p 620–628.10.1016/j.triboint.2016.08.016 ↗
29. E.M. Sharifi, F. Karimzadeh, and M.H. Enayati, Fabrication and Evaluation of Mechanical and Tribological Properties of Boron Carbide Reinforced Aluminum Matrix Nanocomposites, Mater. Des., 2011, 32(6), p 3263–3271. https://doi.org/10.1016/j.matdes.2011.02.03310.1016/j.matdes.2011.02.033 ↗
30. A.K. Gupta, B. Mallik, and D. Roy, Structure Property Correlation of in Situ Reinforced Al-Based Metal Matrix Composite via Stir Casting, Mater. Perform. Charact., 2020, 9(1), p 25.10.1520/MPC20190038 ↗
31. S. Suresh and N.S.V. Moorthi, Process Development in Stir Casting and Investigation on Microstructures and Wear Behavior of TiB2 on Al6061 MMC, Procedia Eng., 2013, 64, p 1183–1190. https://doi.org/10.1016/j.proeng.2013.09.19710.1016/j.proeng.2013.09.197 ↗
32. S.B. Prabu, L. Karunamoorthy, S. Kathiresan, and B. Mohan, Influence of Stirring Speed and Stirring Time on Distribution of Particles in Cast Metal Matrix Composite, J. Mater. Process. Technol., 2006, 171, p 268–273.10.1016/j.jmatprotec.2005.06.071 ↗
33. H. Su, W. Gao, Z. Feng, and Z. Lu, Processing, Microstructure and Tensile Properties of Nano-Sized Al2O3 Particle Reinforced Aluminum Matrix Composites, Mater. Des., 2024, 36(2012), p 590–596. https://doi.org/10.1016/j.matdes.2011.11.06410.1016/j.matdes.2011.11.064 ↗
34. N. Srivastava and M. Anas, An Investigative Review of Squeeze Casting: Processing Effects & Impact on Properties, Mater. Today Proc., 2020, 26(2), p 1914–1920. https://doi.org/10.1016/j.matpr.2020.02.41910.1016/j.matpr.2020.02.419 ↗
35. S. Venkatesan and M.A. Xavior, Analysis of Mechanical Properties of Aluminum Alloy Metal Matrix Composite by Squeeze Casting – A Review, Mater. Today Proc., 2018, 5(5), p 11175–11184. https://doi.org/10.1016/j.matpr.2018.01.14110.1016/j.matpr.2018.01.141 ↗
36. R.S. Rana and R. Purohit, Development and Analysis of Al-Matrix Nano Composites Fabricated by Ultrasonic Assisted Squeeze Casting Process, Mater. Today Proc., 2015, 2, p 3697–3703.10.1016/j.matpr.2015.07.146 ↗
37. P. Sharma, K. Paliwal, R. Kumar, and S. Sharma, A Study on Wear Behaviour of Al/6101/Graphite Composites, J. Asian Ceram. Soc., 2017, 5(1), p 42–48. https://doi.org/10.1016/j.jascer.2016.12.00710.1016/j.jascer.2016.12.007 ↗
38. D. Roy, A.K. Gupta, M.S. Alam, S. Srikanth, and B.K. Jha, Enhancement of Properties of Micro-Alloyed Low-Carbon Ni-Added Steel by Thermomechanical Treatment, J. Mater. Eng. Perform., 2020, 29(12), p 7952–7963. https://doi.org/10.1007/s11665-020-05311-w10.1007/s11665-020-05311-w ↗
39. A. Kumar Gupta, D. Boruah, N. Suresh, N. Kamal, and A.K. Singh, Preparation Effect of Mould Systems on Microstructure and Mechanical Properties of Spheroidised Graphite Iron. Int. J. Eng. Res. Appl. 6(4), p 68–73 (2016), www.ijera.com.
40. G.X. Chen and Z.R. Zhou, Study on Transition between Fretting and Reciprocating Sliding Wear, Wear, 2001, 250, p 665–672.10.1016/S0043-1648(01)00675-5 ↗
41. E. Coating, I. Parameter, K. Kim, and J. Lee, Reciprocal Sliding Friction Model for Estimation Using Markov Chain Monte Carlo Method, Materials (Basel), 2016, 9, p 237.10.3390/ma9040237 ↗
42. G. Paul, S. Shit, H. Hirani, T. Kuila, and N.C. Murmu, Tribological Behavior of Dodecylamine Functionalized Graphene Nanosheets Dispersed Engine Oil Nanolubricants, Tribol. Int., 2019, 131, p 605–619. https://doi.org/10.1016/j.triboint.2018.11.01210.1016/j.triboint.2018.11.012 ↗
43. K. Khanlari, M. Ramezani, P. Kelly, and P. Cao, Reciprocating Sliding Wear Behavior of 60NiTi As Compared to 440C Steel under Lubricated and Unlubricated Conditions Reciprocating Sliding Wear Behavior of 60NiTi As Compared to 440C Steel Under, Tribol. Trans., 2018, 61(6), p 991–1002. https://doi.org/10.1080/10402004.2018.146043410.1080/10402004.2018.1460434 ↗
44. C. Dellacorte, R.D. Noebe, M.K. Stanford, and S.A. Padula, Resilient and Corrosion-Proof Rolling Element Bearings Made From Superelastic Ni-Ti Alloys for Aerospace Mechanism Applications, in Proceedings of the ASTM 2011 Symposium on Rolling Element Bearings, (Los Angeles, CA, United States, 13–15 April 2011), (2011).10.1520/STP103887T ↗