Corrosion Characterization of Ti-6Al-4V Alloy After Constrained Groove Pressing and TiO2 Coating
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. J. Huang, Y. Huang, X. Yu, G. Liu, S. Yu, and D. Fan, Corrosion characterization of Ti-6Al-4V coating layer by the alternating current assisted GTAW method, Corros. Sci., 2022 https://doi.org/10.1016/j.corsci.2021.11006610.1016/j.corsci.2021.110066 ↗
2. B. Zhang, T. Yang, M. Huang, D. Wang, Q. Sun, Y. Wang, and J. Sun, Design of uniform nano α precipitates in a pre-deformed β-Ti alloy with high mechanical performance, J. Mater. Res. Technol., 2019, 8, p 777–787. https://doi.org/10.1016/j.jmrt.2018.06.00610.1016/j.jmrt.2018.06.006 ↗
3. Q. Sirvin, J. Genée, B. Dod, D. Monceau, and D. Texier, Oxygen ingress in titanium and its alloys after high-temperature oxidation: a competition between strengthening and embrittlement, Metall. Mater. Trans. A, 2025, 56, p 1858–1874. https://doi.org/10.1007/s11661-025-07737-010.1007/s11661-025-07737-0 ↗
4. B. Pazhanivel, P. Sathiya, and G. Sozhan, Ultra-fine bimodal (α + β) microstructure induced mechanical strength and corrosion resistance of Ti-6Al-4V alloy produced via laser powder bed fusion process, Opt. Laser Technol., 2020 https://doi.org/10.1016/j.optlastec.2019.10601710.1016/j.optlastec.2019.106017 ↗
5. L.Y. Chen, Y.W. Cui, and L.C. Zhang, Recent development in beta titanium alloys for biomedical applications, Metals (Basel)., 2020, 10, p 1–29. https://doi.org/10.3390/met1009113910.3390/met10091139 ↗
6. M. Nabhani, R. Shoja Razavi, and M. Barekat, Corrosion study of laser cladded Ti-6Al-4V alloy in different corrosive environments, Eng. Fail. Anal., 2019, 97, p 234–241. https://doi.org/10.1016/j.engfailanal.2019.01.02310.1016/j.engfailanal.2019.01.023 ↗
7. Z. Zhang, M. Lin, D.H.L. Seng, S.L. Teo, F. Wei, H.R. Tan, A.K.H. Cheong, S.H. Lim, S. Wang, and J. Pan, Fatigue life enhancement in alpha/beta Ti–6Al–4V after shot peening: an EBSD and TEM crystallographic orientation mapping study of surface layer, Materialia, 2020 https://doi.org/10.1016/j.mtla.2020.10081310.1016/j.mtla.2020.100813 ↗
8. M.R. Amaya-Vazquez, J.M. Sánchez-Amaya, Z. Boukha, and F.J. Botana, Microstructure, microhardness and corrosion resistance of remelted TiG2 and Ti6Al4V by a high power diode laser, Corros. Sci., 2012, 56, p 36–48. https://doi.org/10.1016/j.corsci.2011.11.00610.1016/j.corsci.2011.11.006 ↗
9. I.M. Pohrelyuk, V.M. Fedirko, O.V. Tkachuk, and R.V. Proskurnyak, Corrosion resistance of Ti-6Al-4V alloy with nitride coatings in Ringer’s solution, Corros. Sci., 2013, 66, p 392–398. https://doi.org/10.1016/j.corsci.2012.10.00510.1016/j.corsci.2012.10.005 ↗
10. S. Wang, Z. Liao, Y. Liu, and W. Liu, Influence of thermal oxidation temperature on the microstructural and tribological behavior of Ti6Al4V alloy, Surf. Coat. Technol., 2014, 240, p 470–477. https://doi.org/10.1016/j.surfcoat.2014.01.00410.1016/j.surfcoat.2014.01.004 ↗
11. J. Dai, J. Zhu, C. Chen, and F. Weng, High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review, J. Alloys Compd., 2016, 685, p 784–798. https://doi.org/10.1016/j.jallcom.2016.06.21210.1016/j.jallcom.2016.06.212 ↗
12. B.N. Mordyuk, S.M. Voloshko, V.I. Zakiev, A.P. Burmak, and V.V. Mohylko, Enhanced resistance of Ti6Al4V alloy to high-temperature oxidation and corrosion by forming alumina composite coating, J. Mater. Eng. Perform., 2021, 30, p 1780–1795. https://doi.org/10.1007/s11665-021-05492-y10.1007/s11665-021-05492-y ↗
13. B.N. Mordyuk, S.M. Voloshko, V.I. Zakiev, A.P. Burmak, M.A. Skoryk, V. V. Mohylko, N.I. Khripta, V.Y. Malinin, D.A. Lesyk, Wear and Friction Performance of Alumina-Reinforced Composite Coating on Ti-6Al-4V Alloy Produced by Combining Ultrasonic Impact Treatment and Air-Oxidati, J. Mater. Eng. Perform. 34 (2025) 11515–11536. https://doi.org/10.1007/s11665-024-09979-2.10.1007/s11665-024-09979-2 ↗
14. I. Bencherifa, B. Alili, T. Baudin, F. Brisset, D. Thiaudière, C. Mocuta, D. Bradai, On the microstructure and texture of intermetallics in Al/Mg/Al multi-layer composite fabricated by Accumulative Roll Bonding, Micron 173 (2023). https://doi.org/10.1016/j.micron.2023.103507.10.1016/j.micron.2023.103507 ↗
15. H. Shahmir, and T.G. Langdon, Using heat treatments, high-pressure torsion and post-deformation annealing to optimize the properties of Ti-6Al-4V alloys, Acta Mater., 2017, 141, p 419–426. https://doi.org/10.1016/j.actamat.2017.09.01810.1016/j.actamat.2017.09.018 ↗
16. P.S. Sahoo, A. Meher, M.M. Mahapatra, P.R. Vundavilli, and C. Pandey, Analysis of mechanical and microstructural characteristics of plunger-assisted ECAP strengthened Ti-6Al-4V alloy sheets, Arch. Civ. Mech. Eng., 2023 https://doi.org/10.1007/s43452-023-00742-310.1007/s43452-023-00742-3 ↗
17. H. Wang, Y. Yang, Z. Feng, M. Chen, B. Yang, X. Zhang, X. Wang, H. Qi, Q. Shi, and J. Yi, Microstructure evolution and fracture mechanisms in Ti-6Al-4V alloy under multidirectional isothermal forged, Eng. Fail. Anal., 2025, 178, 109707. https://doi.org/10.1016/j.engfailanal.2025.10970710.1016/j.engfailanal.2025.109707 ↗
18. S. Kumar, Strength enhancement and uniform strain distribution through cross route-constrained groove pressing, IOP Conf. Ser. Mater. Sci. Eng., 2023, 1284, 012035. https://doi.org/10.1088/1757-899x/1284/1/01203510.1088/1757-899x/1284/1/012035 ↗
19. A. Bhardwaj, N. Gohil, A.K. Gupta, and S.S.S. Kumar, An experimental investigation on the influence of elevated-temperature constrained groove pressing on the microstructure, mechanical properties and hardening behaviour of Ti6Al4V alloy, Mater. Sci. Eng. A, 2021, 802, 140651. https://doi.org/10.1016/j.msea.2020.14065110.1016/j.msea.2020.140651 ↗
20. P.C. Yadav, A. Sinhal, S. Sahu, A. Roy, and S. Shekhar, Microstructural inhomogeneity in constrained groove pressed Cu-Zn alloy sheet, J. Mater. Eng. Perform., 2016, 25, p 2604–2614. https://doi.org/10.1007/s11665-016-2142-010.1007/s11665-016-2142-0 ↗
21. S. Ngamta, N. Boonprakob, N. Wetchakun, K. Ounnunkad, S. Phanichphant, and B. Inceesungvorn, A facile synthesis of nanocrystalline anatase TiO2 from TiOSO4 aqueous solution, Mater. Lett., 2013, 105, p 76–79. https://doi.org/10.1016/j.matlet.2013.04.06410.1016/j.matlet.2013.04.064 ↗
22. I. Bencherifa, I. Belkhettab, O. Dabou, K. Derkaoui, A. Chetoui, A. Manseri, B. Hamdoud, and M. Saad, Facile hydrothermal synthesis of novel Cu0.2Co0.2Zn0.2Mn0.2X (X = Ni0.2, Fe0.2, Ni0.2Fe0.2, Ni0.1Fe0.1) high-entropy alloy nanoparticles with tunable magnetic properties, Mater. Sci. Eng. B, 2025, 321, 118526. https://doi.org/10.1016/j.mseb.2025.11852610.1016/j.mseb.2025.118526 ↗
23. W. Ding, A. Bonk, and T. Bauer, Corrosion behavior of metallic alloys in molten chloride salts for thermal energy storage in concentrated solar power plants: a review, Front. Chem. Sci. Eng., 2018, 12, p 564–576. https://doi.org/10.1007/s11705-018-1720-010.1007/s11705-018-1720-0 ↗
24. S. Zherebtsov, M. Murzinova, G. Salishchev, and S.L. Semiatin, Spheroidization of the lamellar microstructure in Ti-6Al-4V alloy during warm deformation and annealing, Acta Mater., 2011, 59, p 4138–4150. https://doi.org/10.1016/j.actamat.2011.03.03710.1016/j.actamat.2011.03.037 ↗
25. C.R. Tubío, F. Guitián, J.R. Salgueiro, and A. Gil, Anatase and rutile TiO2 monodisperse microspheres by rapid thermal annealing: a method to avoid sintering at high temperatures, Mater. Lett., 2015, 141, p 203–206. https://doi.org/10.1016/j.matlet.2014.11.06310.1016/j.matlet.2014.11.063 ↗
26. T. Theivasanthi, M. Alagar, Titanium dioxide (TiO2) Nanoparticles XRD Analyses: An Insight, (2013). http://arxiv.org/abs/1307.1091.
27. E. Detsi, E.D. Jong, A. Zinchenko, Z. Vuković, I. Vuković, S. Punzhin, K. Loos, G.T. Brinke, H.A.D. Raedt, P.R. Onck, and J.T.M.D. Hosson, On the specific surface area of nanoporous materials, Acta Mater., 2011, 59, p 7488–7497. https://doi.org/10.1016/j.actamat.2011.08.02510.1016/j.actamat.2011.08.025 ↗
28. J.Y. Park, Y.J. Lee, K.W. Jun, J.O. Baeg, and D.J. Yim, Chemical synthesis and characterization of highly oil dispersed MgO nanoparticles, J. Ind. Eng. Chem., 2006, 12, p 882–887.
29. S. Xiong, Y. Tang, H.S. Ng, X. Zhao, Z. Jiang, Z. Chen, K.W. Ng, S. Chye, J. Loo, Specific surface area of titanium dioxide ( TiO 2 ) particles influences cyto- and, Toxicology 304 (2013) 132–140.10.1016/j.tox.2012.12.015 ↗
30. T. Ohsaka, Temperature dependence of the Raman spectrum in Anatase TiO2, J. Phys. Soc. Japan, 1980, 48, p 1661–1668. https://doi.org/10.1143/JPSJ.48.166110.1143/JPSJ.48.1661 ↗
31. X. Xue, W. Ji, Z. Mao, H. Mao, Y. Wang, X. Wang, W. Ruan, B. Zhao, and J.R. Lombardi, Raman investigation of nanosized TiO 2: effect of crystallite size and quantum confinement, J. Phys. Chem. C, 2012, 116, p 8792–8797. https://doi.org/10.1021/jp212219610.1021/jp2122196 ↗
32. W. Luo, and A. Taleb, Large-scale synthesis route of TiO2 nanomaterials with controlled morphologies using hydrothermal method and TiO2 aggregates as precursor, Nanomaterials, 2021, 11, p 1–18. https://doi.org/10.3390/nano1102036510.3390/nano11020365 ↗
33. J. Park, T. Back, W.C. Mitchel, S.S. Kim, S. Elhamri, J. Boeckl, S.B. Fairchild, R. Naik, and A.A. Voevodin, Approach to multifunctional device platform with epitaxial graphene on transition metal oxide, Sci. Rep., 2015, 5, p 1–9. https://doi.org/10.1038/srep1437410.1038/srep14374 ↗
34. C.C. Chen, Y.P. Fu, and S.H. Hu, Characterizations of TiO2/SiO2/Ni-Cu-Zn ferrite composite for magnetic photocatalysts, J. Am. Ceram. Soc., 2015, 98, p 2803–2811. https://doi.org/10.1111/jace.1368510.1111/jace.13685 ↗
35. K. Derkaoui, I. Belkhettab, I. Bencherifa, A. Elfiad, Y. Mebdoua, K. Boukhouidem, S. Benredouane, S. Naama, T. Hadjersi, and M. Kechouane, Optical and dielectric properties of NiFe 2 O 4 prepared by co - precipitation: correlation with photocatalytic performance for Rhodamine B degradation under visible light, React. Kinet. Mech. Catal., 2025 https://doi.org/10.1007/s11144-025-02861-910.1007/s11144-025-02861-9 ↗
36. Y. Zhu, H. Li, D. Gu, H. Wang, and N. Bao, Honeycomb hybrid crystal TiO2 film electrode for efficient benzoic acid synthesis, J. Mater. Sci., 2017, 52, p 6623–6634. https://doi.org/10.1007/s10853-017-0898-810.1007/s10853-017-0898-8 ↗
37. Y. Liu, B. Chen, Z. Liu, Z. Zhang, and R.O. Ritchie, Bioinspired interpenetrating-phase metal composites, Prog. Mater. Sci., 2024, 144, 101281.10.1016/j.pmatsci.2024.101281 ↗
38. S. Maadadi, M.E.A. Benamar, Y. Mebdoua, K. Derkaoui, F. Lekoui, J.M. Nunzi, H.D. Habak, M. El Ganaoui and N. Belkhalfa, Investigation of optical, dielectric, and electrical properties of ZnO/cold sprayed Al system and their correlation with photovoltaic performance, Opt. Quantum Electron., 2025 https://doi.org/10.1007/s11082-025-08266-110.1007/s11082-025-08266-1 ↗
39. N.E. Arabi, Y. Bencheikh, W. Achour, A. Hebbaz, A. Manseri, K. Derkaoui, and T. Hadjersi, Facile hydrothermal synthesis of rGO/CoSO4 composite as high-performance supercapacitor electrode: effect of autoclave and non-autoclave, Diamond Relat. Mater., 2025, 156, 112416. https://doi.org/10.1016/j.diamond.2025.11241610.1016/j.diamond.2025.112416 ↗
40. Y. Yang, C. Xia, Z. Feng, X. Jiang, B. Pan, X. Zhang, M. Ma and R. Liu, Corrosion and passivation of annealed Ti-20Zr-6.5Al-4V alloy, Corros. Sci., 2015, 101, p 56–65. https://doi.org/10.1016/j.corsci.2015.08.03810.1016/j.corsci.2015.08.038 ↗
41. P. Afzali, R. Ghomashchi and R.H. Oskouei, On the corrosion behaviour of low modulus titanium alloys for medical implant applications: a review, Metals, 2019 https://doi.org/10.3390/met908087810.3390/met9080878 ↗
42. M.G.R. Mahlobo, L. Chikosha and P.A. Olubambi, Study of the corrosion properties of powder rolled Ti-6Al-4V alloy applied in the biomedical implants, J. Mater. Res. Technol., 2022, 18, p 3631–3639. https://doi.org/10.1016/j.jmrt.2022.04.00410.1016/j.jmrt.2022.04.004 ↗
43. A. Balakrishnan, B.C. Lee, T.N. Kim and B.B. Panigrahi, Corrosion Behaviour of Ultra Fine Grained Titanium in Simulated Body Fluid, 2008, 22, p 58–64.
44. D. Hyuk, J. Park, Y. Kim and K. Park, Constrained groove pressing and its application to grain refinement of aluminum, Mater. Sci. Eng. A, 2002, 328, p 98–103.10.1016/S0921-5093(01)01665-3 ↗
45. K. Guo, T. Wang, K. Meng, C. Yao and Q. Wang, Influence of cold rolling deformation on mechanical properties and corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy, Mater. Res. Express, 2020 https://doi.org/10.1088/2053-1591/ab96fc10.1088/2053-1591/ab96fc ↗
46. H. Krawiec, V. Vignal, E. Schwarzenboeck and J. Banasa, Role of plastic deformation and microstructure in the micro-electrochemical behaviour of Ti-6Al-4V in sodium chloride solution, Electrochim. Acta, 2013, 104, p 400–406. https://doi.org/10.1016/j.electacta.2012.12.02910.1016/j.electacta.2012.12.029 ↗
47. Y. Qiao, D. Xu, S. Wang, Y. Ma, J. Chen, Y. Wang and H. Zhou, Corrosion and tensile behaviors of Ti-4Al-2V-1Mo-1Fe and Ti-6Al-4V titanium alloys, Metals, 2019 https://doi.org/10.3390/met911121310.3390/met9111213 ↗
48. Y. Zhou, F. Yang, Y. Shao, B. Lu, T. Lu and Z. Guo, Electrochemical corrosion behavior of powder metallurgy Ti6Al4V alloy, J. Mater. Eng. Perform., 2021, 30, p 556–564. https://doi.org/10.1007/s11665-020-05324-510.1007/s11665-020-05324-5 ↗
49. A. Brik, T. Hadjersi, K. Derkaoui, S. Naama, K. Bendadel, S. Bouachma, S. Benredouane, K. Boukhouidem, Tetracycline Degradation Under Visible Light Using a New SiNW/CeO2/NiO Composite as a High-Efficiency Photocatalyst, J. Inorg. Organomet. Polym. Mater. (2025). https://doi.org/10.1007/s10904-025-03888-0.10.1007/s10904-025-03888-0 ↗
50. H.M. Hamza, K.M. Deen and W. Haider, Microstructural examination and corrosion behavior of selective laser melted and conventionally manufactured Ti6Al4V for dental applications, Mater. Sci. Eng. C, 2020 https://doi.org/10.1016/j.msec.2020.11098010.1016/j.msec.2020.110980 ↗
51. H.S. Abdo, E.S.M. Sherif and H.A. El-Serehy, Manufacturing of ti-6%al and ti-6%al-4%v alloys and their corrosion in sodium chloride solutions, Crystals, 2020, 10, p 9–11. https://doi.org/10.3390/cryst1003018110.3390/cryst10030181 ↗
52. R. Akkouche, C. Rémazeilles, M. Jeannin, M. Barbalat, R. Sabot and P. Refait, Influence of soil moisture on the corrosion processes of carbon steel in artificial soil: active area and differential aeration cells, Electrochim. Acta, 2016, 213, p 698–708. https://doi.org/10.1016/j.electacta.2016.07.16310.1016/j.electacta.2016.07.163 ↗
53. M.G.R. Mahlobo, P.A. Olubambi, M. Jeannin and P. Refait, Cathodic protection of buried steel structures: processes occurring at the steel/soil interface during wet/dry cycles, Mater. Corros., 2020, 71, p 451–463. https://doi.org/10.1002/maco.20191115510.1002/maco.201911155 ↗
54. A.M. Al-mayouf, A.A. Al-swayih, N.A. Al-mobarak and A.S. Al-jabab, Corrosion behavior of a new titanium alloy for dental implant applications in fluoride media, Mater. Chem. Phys., 2004, 86, p 320–329. https://doi.org/10.1016/j.matchemphys.2004.03.01910.1016/j.matchemphys.2004.03.019 ↗
55. B. Abdallah, M. Kakhia, W. Alssadat and M.S. Rihawy, Deposition of Ti6Al4V thin films by DC magnetron sputtering: effect of the current on structural, corrosion and mechanical properties, Iranian Journal of Science and Technology, Transactions A: Science, 2019, 43, p 1957–1965. https://doi.org/10.1007/s40995-018-0643-410.1007/s40995-018-0643-4 ↗
56. I. Bencherifa, K. Abib, K.A. Yazid, B. Alili, D. Bradai, Corrosion behavior of Al/M/gAl multilayered composite elaborated by accumulated roll bonding, Trans. Nonferrous Met. Soc. China 34 (2024) 122–138. https://doi.org/10.1016/S1003-6326(23)66386-1.10.1016/S1003-6326(23)66386-1 ↗
57. R. Liu, Y. Cui, L. Liu, B. Zhang and F. Wang, A primary study of the effect of hydrostatic pressure on stress corrosion cracking of Ti-6Al-4V alloy in 3.5% NaCl solution, Corros. Sci., 2020 https://doi.org/10.1016/j.corsci.2019.10840210.1016/j.corsci.2019.108402 ↗
58. I. Cvijović-Alagić, Z. Cvijović, S. Mitrović, V. Panić and M. Rakin, Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution, Corros. Sci., 2011, 53, p 796–808. https://doi.org/10.1016/j.corsci.2010.11.01410.1016/j.corsci.2010.11.014 ↗
59. S. Latreche, N. Boutarek-Zaourar, I. Bencherifa, F. Messaoud and M. Trari, Electrochemical performance of NiAl activated cathode for green hydrogen production, Chin. J. Chem. Eng., 2024 https://doi.org/10.1016/j.cjche.2024.07.01210.1016/j.cjche.2024.07.012 ↗
60. K. Derkaoui, I. Bencherifa, A. Elfiad, Y. Mebdoua, I. Belkhettab, K. Boukhouidem, S. Benredouane, T. Hadjersi, A. Manseri and M. Kechouane, Unveiling the optical and dielectric properties of MnFe2O4: a high-performance visible-light photocatalyst for sustainable Rhodamine B degradation, J. Electron. Mater., 2025, 54, p 5271–5286. https://doi.org/10.1007/s11664-025-11991-810.1007/s11664-025-11991-8 ↗
61. T. Shibata, THE EFFECT OF FILM FORMATION CONDITIONS ON THE STRUCTURE AND COMPOSITION OF ANODIC OXIDE FILMS ON TITANIUM Structure depending on temperature anatase phase in the film consists of very small microcrystallites . about 100 A in size . The electrochemical me, Corros. Sci. 37 (1995) 253–270.10.1016/0010-938X(94)00133-Q ↗
62. N. M, M. S, S. T, O. M, Effect of fluoride concentration and pH on corrosion behavior of titanium for dental use, J. Dent. Res. 78 (1999) 1568–1572. https://doi.org/10.1177/002203459907800912.10.1177/002203459907800912 ↗
63. K. Derkaoui, I. Bencherifa, T. Hadjersi, I. Belkhettab, K. Boukhouidem, S. Bouanik, A. Brik, M. Kechouane and M.M. Kaci, MnO2 decorated silicon nanowires: a novel photocatalyst for improved Rhodamine B removal under visible light exposure, Surf. Interface Anal., 2024 https://doi.org/10.1016/j.surfin.2024.10508610.1016/j.surfin.2024.105086 ↗
64. J. Li, Y. Bai, Z. Fan, S. Li, Y. Hao, R. Yang and Y. Gao, Effect of fluoride on the corrosion behavior of nanostructured Ti-24Nb-4Zr-8Sn alloy in acidulated artificial saliva, J. Mater. Sci. Technol., 2018, 34, p 1660–1670. https://doi.org/10.1016/j.jmst.2018.01.00810.1016/j.jmst.2018.01.008 ↗
65. Y. Li and J. Xu, Is niobium more corrosion-resistant than commercially pure titanium in fluoride-containing artificial saliva?, Electrochim. Acta, 2017, 233, p 151–166. https://doi.org/10.1016/j.electacta.2017.03.01510.1016/j.electacta.2017.03.015 ↗
66. E.S.M. Sherif, S.A. Ragab and H.S. Abdo, Role of vanadium additions on the corrosion mitigation of ti-6al-xv alloy in simulated body fluid, Metals (Basel)., 2020, 10, p 1–19. https://doi.org/10.3390/met1007090310.3390/met10070903 ↗
67. K. Derkaoui, T. Hadjersi, K. Boukhouidem, A.M. Djaballah, C. Belabed, S. Friha, S. Naama, M. Kechouane and M. Trari, Optical, dielectric and photoelectrochemical performances of the CeO2/silicon nanowire system: studying the silicon nanowire length effect on the photodegradation of rhodamine B, React. Kinet. Mech. Catal., 2024, 138, p 499–518. https://doi.org/10.1007/s11144-024-02684-010.1007/s11144-024-02684-0 ↗
68. E. McCafferty, Standard electrode potentials of the elements as a fundamental periodic property of atomic number, Electrochim. Acta, 2007, 52, p 5884–5890. https://doi.org/10.1016/j.electacta.2007.03.02210.1016/j.electacta.2007.03.022 ↗
69. K. Derkaoui, I. Bencherifa, Y. Mebdoua, K. Boukhouidem, T. Hadjersi, A. Chetoui, S. Naama, S. Friha, M. Kechouane and M.M. Kaci, Novel SiNWs/MnO2/Ni(OH)2 heterostructure as photocatalyst for efficient degradation of Rhb under visible light, J. Inorg. Organomet. Polym. Mater., 2024 https://doi.org/10.1007/s10904-024-03517-210.1007/s10904-024-03517-2 ↗
70. M. Liu, F. Huang, Z. Lai, S. Chen, J. Li, Y. Wang, L. Fan, L. Ma and Y. Jin, Atomic-scale de-passivation mechanisms of anatase TiO2 induced by corrosive halides based on density-functional theory, Appl. Surf. Sci., 2023 https://doi.org/10.1016/j.apsusc.2023.15685910.1016/j.apsusc.2023.156859 ↗