Evolution of Microstructure, Mechanical Properties, and Tribological Behavior of AA2024/B4C/Al2O3 Nanocomposites Fabricated by Multi-pass FSP
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. G. Huang, J. Wu, W. Hou, L.H. Ahmad Shah, A.R.H. Midawi, F. Cao, A. Gerlich, Y. Shen, and F. Meng, A Novel Two-Step Method to Prepare Fine-Grained SiC/Al-Mg-Sc-Zr Nanocomposite: Processing, Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2021, 823, p 141764. https://doi.org/10.1016/j.msea.2021.14176410.1016/j.msea.2021.141764 ↗
2. A. Mazahery, H. Abdizadeh, and H.R. Baharvandi, Development of High-Performance A356/nano-Al2O3 Composites, Mater. Sci. Eng. A, 2009, 518, p 61–64. https://doi.org/10.1016/j.msea.2009.04.01410.1016/j.msea.2009.04.014 ↗
3. A. Sharma, V.M. Sharma, S. Mewar, S.K. Pal, and J. Paul, Friction Stir Processing of Al6061-SiC-Graphite Hybrid Surface Composites, Mater. Manuf. Processes, 2018, 33, p 795–804. https://doi.org/10.1080/10426914.2017.140172610.1080/10426914.2017.1401726 ↗
4. R. Acuña, M.J. Cristóbal, C.M. Abreu, and M. Cabeza, Microstructure and Wear Properties of Surface Composite Layer Produced by Friction Stir Processing (FSP) in AA2024-T351 Aluminum Alloy, Metall. Mater. Trans. A, 2019, 50, p 2860–2874. https://doi.org/10.1007/s11661-019-05172-610.1007/s11661-019-05172-6 ↗
5. M. Gui, S.B. Kang, and K. Euh, Influence of Spraying Conditions on Microstructures of Al-SiC p Composites by Plasma Spraying, Metall. and Mater. Trans. A., 2005, 36, p 2471–2480. https://doi.org/10.1007/s11661-005-0121-410.1007/s11661-005-0121-4 ↗
6. M. Bashirzadeh, F. Azarmi, C.P. Leither, and G. Karami, Investigation on Relationship Between Mechanical Properties and Microstructural Characteristics of Metal Matrix Composites Fabricated by Cold Spraying Technique, Appl. Surf. Sci., 2013, 275, p 208–216. https://doi.org/10.1016/j.apsusc.2012.12.16610.1016/j.apsusc.2012.12.166 ↗
7. R. Butola, L. Tyagi, R.M. Singari, Q. Murtaza, H. Kumar, and D. Nayak, Mechanical and Wear Performance of Al/SiC Surface Composite Prepared Through Friction Stir Processing, Mater Res Express., 2021, 8, p 016520. https://doi.org/10.1088/2053-1591/abd89d10.1088/2053-1591/abd89d ↗
8. B. Bagheri and M. Abbasi, Development of AZ91/SiC Surface Composite by FSP: Effect of Vibration and Process Parameters on Microstructure and Mechanical Characteristics, Adv. Manuf., 2020, 8, p 82–96. https://doi.org/10.1007/s40436-019-00288-910.1007/s40436-019-00288-9 ↗
9. M.S. Bin Reyaz and A.N. Sinha, Fabrication of Tungsten Inert Gas-Welded Dissimilar Aluminium Joints Using Different Friction Stir Processing Tools Through Response Surface Method, Adv. Mater. Process. Technol., 2024 https://doi.org/10.1080/2374068X.2024.234152810.1080/2374068X.2024.2341528 ↗
10. M.S. Reyaz and A.N. Sinha, Modeling the Effects of Tool Pin Configurations and Friction Stir Processing Parameters on Tungsten Inert Gas Welded Dissimilar Aluminum Alloy Joints, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09444-010.1007/s11665-024-09444-0 ↗
11. M.S. Bin Reyaz and A.N. Sinha, Investigation on the Influence of FSP Parameters on TIG Welded Dissimilar Aluminum Joints Using RSM and Desirability Function Approach, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2024 https://doi.org/10.1177/0954406224123116510.1177/09544062241231165 ↗
12. M. Sarkari Khorrami, M. Kazeminezhad, and A.H. Kokabi, The effect of SiC nanoparticles on the friction stir processing of severely deformed aluminum, Mater. Sci. Eng. A, 2014, 602, p 110–118. https://doi.org/10.1016/j.msea.2014.02.06710.1016/j.msea.2014.02.067 ↗
13. E.R.I. Mahmoud, M. Takahashi, T. Shibayanagi, and K. Ikeuchi, Wear Characteristics of Surface-Hybrid-MMCs Layer Fabricated on Aluminum Plate by Friction Stir Processing, Wear, 2010, 268, p 1111–1121. https://doi.org/10.1016/j.wear.2010.01.00510.1016/j.wear.2010.01.005 ↗
14. M. Kianezhad and A. Honarbakhsh Raouf, Effect of Nano-Al2O3 Particles and Friction Stir Processing on 5083 TIG Welding Properties, J. Mater. Process. Technol., 2019, 263, p 356–365. https://doi.org/10.1016/j.jmatprotec.2018.08.01010.1016/j.jmatprotec.2018.08.010 ↗
15. Q. Huang, R. He, C. Wang, and X. Tang, Microstructure, Corrosion and Mechanical Properties of TiC Particles/Al-5Mg Composite Fillers for Tungsten Arc Welding of 5083 Aluminum Alloy, Materials., 2019, 12, p 3029. https://doi.org/10.3390/ma1218302910.3390/ma12183029 ↗
16. R. Ande, P. Gulati, D. Kumar Shukla, and H. Dhingra, Microstructural and Wear Characteristics of Friction Stir Processed Al-7075/SiC Reinforced Aluminium Composite, Mater Today Proc., 2019, 18, p 4092–4101. https://doi.org/10.1016/j.matpr.2019.07.35310.1016/j.matpr.2019.07.353 ↗
17. D. Aruri, K. Adepu, K. Adepu, and K. Bazavada, Wear and Mechanical Properties of 6061–T6 Aluminum Alloy Surface Hybrid Composites [(SiC+Gr) and (SiC+Al2O3)] Fabricated by Friction Stir Processing, J. Market. Res., 2013, 2, p 362–369. https://doi.org/10.1016/j.jmrt.2013.10.00410.1016/j.jmrt.2013.10.004 ↗
18. K.S. Sandhu, H. Singh, and G. Singh, Influence of Sub-Zero Coolant Circulation and Additive Nanoparticles on Performance Characteristics of FSPed Al6061 Alloy, Aust. J. Mech. Eng., 2024 https://doi.org/10.1080/14484846.2024.240080410.1080/14484846.2024.2400804 ↗
19. D. Ghanbari, M. Kasiri Asgarani, K. Amini, and F. Gharavi, Influence of heat Treatment on Mechanical Properties and Microstructure of the Al2024/SiC Composite Produced by Multi–pass Friction Stir Processing, Measurement, 2017, 104, p 151–158. https://doi.org/10.1016/j.measurement.2017.03.02410.1016/j.measurement.2017.03.024 ↗
20. E. Moustafa, Effect of Multi-Pass Friction Stir Processing on Mechanical Properties for AA2024/Al2O3 Nanocomposites, Materials., 2017, 10, p 1053. https://doi.org/10.3390/ma1009105310.3390/ma10091053 ↗
21. H. Rana and V. Badheka, Elucidation of the Role of Rotation Speed and Stirring Direction on AA 7075-B4 C Surface Composites Formulated by Friction Stir Processing, Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 2019, 233, p 977–994. https://doi.org/10.1177/146442071773654810.1177/1464420717736548 ↗
22. S. Kumar and A.N. Sinha, Microstructure and Mechanical Properties of Aluminum Surface Composites Fabricated Via Multi-pass FSP with B4C and Al2O3 Reinforcements, J. Adhes. Sci. Technol.Adhes Sci. Technol., 2025 https://doi.org/10.1080/01694243.2025.246404610.1080/01694243.2025.2464046 ↗
23. U. Pranavi, P. Venkateshwar Reddy, S. Venukumar, and M. Cheepu, Evaluation of Mechanical and Wear Properties of Al 5059/B4C/Al2O3 Hybrid Metal Matrix Composites, J. Compos. Sci., 2022, 6, p 86. https://doi.org/10.3390/jcs603008610.3390/jcs6030086 ↗
24. S.J. James, M. Ganesan, P. Santhamoorthy, and P. Kuppan, Development of Hybrid Aluminium Metal Matrix Composite and Study of Property, Mater. Today Proc., 2018, 5, p 13048–13054. https://doi.org/10.1016/j.matpr.2018.02.29110.1016/j.matpr.2018.02.291 ↗
25. K. Giridharan, P. Sevvel, R. Ramadoss, and B. Stalin, Friction Stir Processing of Nanofiller Assisted AISI 1010 Steel-CDA 101 Copper Dissimilar Welds: A Strength Factor Approach, Metall. Res. Technol., 2022, 119, p 505. https://doi.org/10.1051/metal/202206510.1051/metal/2022065 ↗
26. M.V. Sezhian, G. Chakravarthi, K. Giridharan, B. Stalin, B.Y. Kumar, P. Sureshkumar, J. Vairamuthu, and R. Krishnaraj, Investigation of Friction Stir-Welded B4C Particles-Reinforced Copper Joint: Mechanical, Fatigue, and Metallurgical Properties, Adv. Mater. Sci. Eng., 2022, 2022, p 1–11. https://doi.org/10.1155/2022/166704110.1155/2022/1667041 ↗
27. J. Gunasekaran, P. Sevvel, I. John Solomon, and J. Vasanthe Roy, Multi Objective Optimization of Parameters During FSW of AZ80A - AZ31B Mg Alloys Using Grey Relational Analysis, J. Mech. Sci. Technol., 2024, 38, p 4971–4982. https://doi.org/10.1007/s12206-024-0832-310.1007/s12206-024-0832-3 ↗
28. J. Solomon, P. Sevvel, J. Gunasekaran, and S.J. Rajarajan, Establishment of Empirical Relations Amidst Mechanical Attributes of Friction Stir Welded Distinctive Alloys of Mg and Optimized Process Parameters, Mater. Res. Express., 2023, 10, p 066502. https://doi.org/10.1088/2053-1591/acd5ae10.1088/2053-1591/acd5ae ↗
29. M.S. Reyaz, A.N. Sinha, H. Mehdi, and Q. Murtaza, Effect of Pulsed TIG Welding Parameters on the Microstructural Evolution and Mechanical Properties of Dissimilar AA6061-T6 and AA7075-T6 Weldments, Arab. J. Sci. Eng., 2023 https://doi.org/10.1007/s13369-023-08563-510.1007/s13369-023-08563-5 ↗
30. M.S. Reyaz and A.N. Sinha, Effect of Heat Input on Microstructure and Mechanical Properties of Automated Tungsten Inert Gas-Welded Dissimilar AA6061-T6 and AA7075-T6 Joints, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-09026-610.1007/s11665-023-09026-6 ↗
31. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R. Rep., 2005, 50, p 1–78. https://doi.org/10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
32. M.S. Reyaz and A.N. Sinha, Improving Tensile Strength, Impact Toughness and Wear Resistance of TIG Welded Dissimilar AA7075-T6/AA6061-T6 Joints Through Friction Stir Processing, Int. J. Interact. Des. Manuf. (IJIDeM)., 2024 https://doi.org/10.1007/s12008-023-01691-010.1007/s12008-023-01691-0 ↗
33. M.S. Reyaz and A.N. Sinha, Parametric Optimization and Characterization of AA6061-T6 and AA7075-T6 Tungsten Inert Gas Welding Joints Subjected to Friction Stir Processing, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-023-09111-w10.1007/s11665-023-09111-w ↗
34. A. Sharma, Y. Morisada, and H. Fujii, Interfacial Microstructure and Strengthening Mechanisms of SPSed Al/GNP Nanocomposite Subjected to Multi-pass Friction Stir Processing, Mater CharactCharact., 2023, 197, 112652. https://doi.org/10.1016/j.matchar.2023.11265210.1016/j.matchar.2023.112652 ↗
35. M. Paidar, O.O. Ojo, H.R. Ezatpour, and A. Heidarzadeh, Influence of Multi-pass FSP on the Microstructure, Mechanical Properties and Tribological Characterization of Al/B4C Composite Fabricated by Accumulative Roll Bonding (ARB), Surf. Coat. Technol., 2019, 361, p 159–169. https://doi.org/10.1016/j.surfcoat.2019.01.04310.1016/j.surfcoat.2019.01.043 ↗
36. C.I. Chang, C.J. Lee, and J.C. Huang, Relationship Between Grain Size and Zener-Holloman Parameter During Friction Stir Processing in AZ31 Mg Alloys, Scr. Mater., 2004, 51, p 509–514. https://doi.org/10.1016/j.scriptamat.2004.05.04310.1016/j.scriptamat.2004.05.043 ↗
37. R. Senthilkumar, M. Prakash, N. Arun, and A.A. Jeyakumar, The Effect of the Number of Passes in Friction Stir Processing of Aluminum alloy (AA6082) and its Failure Analysis, Appl. Surf. Sci., 2019, 491, p 420–431. https://doi.org/10.1016/j.apsusc.2019.06.13210.1016/j.apsusc.2019.06.132 ↗
38. M. Srivastava, S. Rathee, A.N. Siddiquee, and S. Maheshwari, Investigation on the Effects of Silicon Carbide and Cooling Medium during Multi-Pass FSP of Al-Mg/ SiC Surface Composites, SILICON, 2019, 11, p 2149–2157. https://doi.org/10.1007/s12633-018-0037-410.1007/s12633-018-0037-4 ↗
39. M. Manjunath, S. Subramanian Pillappan, and S. Kurse, Process Parameter Analysis of Double Pass Friction Stir Composite Welds, Mater. Manuf. Processes, 2023 https://doi.org/10.1080/10426914.2023.219038010.1080/10426914.2023.2190380 ↗
40. Y. Chen, H. Ding, J. Li, Z. Cai, J. Zhao, and W. Yang, Influence of Multi-pass Friction Stir Processing on the Microstructure and Mechanical Properties of Al-5083 Alloy, Mater. Sci. Eng. A, 2016, 650, p 281–289. https://doi.org/10.1016/j.msea.2015.10.05710.1016/j.msea.2015.10.057 ↗
41. H. Mehdi, A. Mehmood, A. Chinchkar, A.W. Hashmi, C. Malla, and P. Mohapatra, Optimization of Process Parameters on the Mechanical Properties of AA6061/Al2O3 Nanocomposites Fabricated by Multi-pass Friction Stir Processing, Mater. Today Proc., 2022 https://doi.org/10.1016/j.matpr.2021.11.33310.1016/j.matpr.2021.11.333 ↗
42. M.S. Bin Reyaz and A.N. Sinha, Exploring the Influence of Pin Geometry on Metallurgical and Mechanical Characteristics of Dissimilar Aluminum TIG Welds Via Friction Stir Processing, J. Adhes. Sci. Technol.Adhes. Sci. Technol., 2024, 38, p 1–24. https://doi.org/10.1080/01694243.2024.233530610.1080/01694243.2024.2335306 ↗
43. M. Raturi and A. Bhattacharya, Microstructure and Texture Correlation of Secondary Heating Assisted Dissimilar Friction Stir Welds of Aluminum Alloys, Mater. Sci. Eng. A, 2021, 825, p 141891. https://doi.org/10.1016/j.msea.2021.14189110.1016/j.msea.2021.141891 ↗
44. A.J. Ansari and M. Anas, Effect of Varying Volume Fraction of Reinforcement on the Microstructure, Hardness and Tribological Behaviour of Aluminium Metal Matrix Composites Developed Through FSP Technique, J. Inst. Eng. (India): Ser. D., 2024, 105, p 263–273. https://doi.org/10.1007/s40033-023-00476-910.1007/s40033-023-00476-9 ↗
45. S.B. Reyaz and S.K. Parida, About the Design, Development of an Automated SMAW Setup and the Weldment Analysis in Air and Wet Working Environment, IOP Conf. Ser. Mater. Sci. Eng., 2019, 653, 012039. https://doi.org/10.1088/1757-899X/653/1/01203910.1088/1757-899X/653/1/012039 ↗
46. M. Khalili, A.R. Eivani, S.H. Seyedein, and H.R. Jafarian, The Effect of Multi-pass Friction Stir Processing on Microstructure and Mechanical Properties of Dual-Phase Brass Alloy, J. Market. Res., 2022, 21, p 1177–1195. https://doi.org/10.1016/j.jmrt.2022.09.06910.1016/j.jmrt.2022.09.069 ↗
47. H. Mehdi and R.S. Mishra, Consequence of Reinforced SiC Particles on Microstructural and Mechanical Properties of AA6061 Surface Composites by Multi-pass FSP, J. Adhes. Sci. Technol.Adhes. Sci. Technol., 2022, 36, p 1279–1298. https://doi.org/10.1080/01694243.2021.196484610.1080/01694243.2021.1964846 ↗
48. Y. Xie, X. Meng, Y. Chang, D. Mao, Y. Yang, Y. Xu, L. Wan, and Y. Huang, Ameliorating Strength-Ductility Efficiency of Graphene Nanoplatelet-Reinforced Aluminum Composites Via Deformation-Driven Metallurgy, Compos. Sci. Technol., 2022, 219, 109225. https://doi.org/10.1016/j.compscitech.2021.10922510.1016/j.compscitech.2021.109225 ↗
49. D. Mao, Y. Xie, X. Meng, X. Ma, Z. Zhang, X. Sun, L. Wan, K. Volodymyr, and Y. Huang, Strength–Ductility Materials by Engineering a Coherent Interface at Incoherent Precipitates, Mater. Horiz.Horiz., 2024, 11, p 3408–3419. https://doi.org/10.1039/D4MH00139G10.1039/D4MH00139G ↗
50. D. Mao, X. Ma, Y. Xie, X. Meng, N. Wang, Z. Zhang, X. Sun, and Y. Huang, In-situ Solid-State Deformation-Driven Rapid Reaction Towards Higher Strength-Ductility Al-CuO Composites, Compos. Part A Appl. Sci. Manuf., 2024, 182, 108174. https://doi.org/10.1016/j.compositesa.2024.10817410.1016/j.compositesa.2024.108174 ↗
51. M. Singh, K. Goyal, and D. Bhandari, Influence of TiO2 and Y2O3 Nanoparticles on Mechanical Properties of Aluminium Matrix Hybrid Nanocomposites Fabricated by Vacuum Die Casting, World J. Eng., 2024, 21, p 837–850. https://doi.org/10.1108/WJE-01-2023-003210.1108/WJE-01-2023-0032 ↗
52. A. Garg, M. Raturi, and A. Bhattacharya, Strength, Failure and Microstructure Development for Friction Stir Welded AA6061-T6 Joints with Different Tool Pin Profiles, CIRP J. Manuf. Sci. Technol., 2020, 29, p 99–114. https://doi.org/10.1016/j.cirpj.2020.03.00110.1016/j.cirpj.2020.03.001 ↗
53. H.A. Deore, A. Bhardwaj, A.G. Rao, J. Mishra, and V.D. Hiwarkar, Consequence of Reinforced SiC Particles and post process artificial ageing on Microstructure and Mechanical Properties of Friction Stir Processed AA7075, Def. Technol., 2020, 16, p 1039–1050. https://doi.org/10.1016/j.dt.2019.12.00110.1016/j.dt.2019.12.001 ↗
54. S.S. Mirjavadi, M. Alipour, A.M.S. Hamouda, A. Matin, S. Kord, B.M. Afshari, and P.G. Koppad, Effect of Multi-pass Friction Stir Processing on the Microstructure, Mechanical and Wear Properties of AA5083/ZrO2 Nanocomposites, J. Alloys Compd., 2017, 726, p 1262–1273. https://doi.org/10.1016/j.jallcom.2017.08.08410.1016/j.jallcom.2017.08.084 ↗
55. T. Azimzadegan and S. Serajzadeh, An Investigation into Microstructures and Mechanical Properties of AA7075-T6 during Friction Stir Welding at Relatively High Rotational Speeds, J. Mater. Eng. Perform., 2010, 19, p 1256–1263. https://doi.org/10.1007/s11665-010-9625-110.1007/s11665-010-9625-1 ↗
56. A. Shafiei-Zarghani, S.F. Kashani-Bozorg, and A.Z. Hanzaki, Wear Assessment of Al/Al2O3 Nano-Composite Surface Layer Produced Using Friction Stir Processing, Wear, 2011, 270, p 403–412. https://doi.org/10.1016/j.wear.2010.12.00210.1016/j.wear.2010.12.002 ↗
57. M.S. Bin Reyaz and A.N. Sinha, An Experimental Investigation on Mechanical Characteristics and Wear Behaviour of TIG Welded Dissimilar Aluminum Alloys, J. Adhes. Sci. Technol.Adhes. Sci. Technol., 2023, 38(8), p 1–36. https://doi.org/10.1080/01694243.2023.225178210.1080/01694243.2023.2251782 ↗
58. M.S. Bin Reyaz and A.N. Sinha, Analysis of Mechanical Properties and Optimization of Tungsten Inert Gas Welding Parameters on Dissimilar AA6061-T6 and AA7075-T6 by a response Surface Methodology-Based Desirability Function Approach, Eng. Optim.Optim., 2023, 56(12), p 1–32. https://doi.org/10.1080/0305215X.2023.223013310.1080/0305215X.2023.2230133 ↗
59. N. Yuvaraj and S. Aravindan, Vipin: Wear Characteristics of Al5083 Surface Hybrid Nano-composites by Friction Stir Processing, Trans. Indian Inst. Met., 2017, 70, p 1111–1129. https://doi.org/10.1007/s12666-016-0905-910.1007/s12666-016-0905-9 ↗
60. H.S. Arora, H. Singh, and B.K. Dhindaw, Wear behaviour of a Mg alloy subjected to friction stir processing, Wear, 2013, 303, p 65–77. https://doi.org/10.1016/j.wear.2013.02.02310.1016/j.wear.2013.02.023 ↗
61. C.N. Shyam Kumar, R. Bauri, and D. Yadav, Wear Properties of 5083 Al–W Surface Composite Fabricated by Friction Stir Processing, Tribol. Int.. Int., 2016, 101, p 284–290. https://doi.org/10.1016/j.triboint.2016.04.03310.1016/j.triboint.2016.04.033 ↗
62. L.H. Mair, T.A. Stolarski, R.W. Vowles, and C.H. Lloyd, Wear: Mechanisms, Manifestations and Measurement Report of a workshop, J. Dent., 1996, 24, p 141–148. https://doi.org/10.1016/0300-5712(95)00043-710.1016/0300-5712(95)00043-7 ↗
63. A. Benamor, N. Chiker, M. Salhi, A. Haddad, Y. Hadji, H. Benamor, B. Hamzaoui, R. Badji, and M. Hadji, Microstructure, Hardness, and Wear Resistance of AA5083/Ti3SiC2 Composites Fabricated Via Friction Stir Processing, Int. J. Adv. Manuf. Technol., 2024, 130, p 5979–5998. https://doi.org/10.1007/s00170-024-13051-710.1007/s00170-024-13051-7 ↗