Recent Developments in Cladding and Coating Using Cold Metal Transfer Technology
Source abstract
Abstract
One of the modern welding techniques for joining dissimilar as well as similar materials is cold metal transfer (CMT). Thanks to low heat input in the process, no-spatter welding is guaranteed. Regulated metal deposition in CMT improves the aesthetics of the weld bead. This review article critically analyzes CMT cladding techniques, cladding types and applications. Several combinations of base metal and cladding material have been covered in detail with particular emphasis to microstructure and mechanical properties. CMT cladding has made it feasible to clad steel and aluminum satisfactorily. It surpasses several cladding techniques as per literature. In fact, CMT cladding is an efficient additive manufacturing technology and finds application in the automotive, defense and power plants sectors. There are several issues worth researching in cladding and coating by CMT for enhancing the overall sustainability of the processes. Based on the limited experimental data in the literature, some empirical expressions are established between performance and process parameters. Particularly, it is noted that dilution in cladding is a linear function of heat input. There is enough scope to carry out physics-based modeling and extensive experimentation for verifying the empirical relations and update them. Modeling and simulation can supplement experimental research effectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. S. Selvi, A. Vishvaksenan, and E. Rajasekar, Cold Metal Transfer (CMT) Technology - An Overview, Def. Technol., 2018, 14, p 28–44. https://doi.org/10.1016/j.dt.2017.08.00210.1016/j.dt.2017.08.002 ↗
2. H. Mindivan, Wear Behavior of Plasma and HVOF Sprayed WC-12Co + 6% ETFE Coatings on AA2024-T6 Aluminum Alloy, Surf. Coat. Technol., 2010, 204, p 1870. https://doi.org/10.1016/j.surfcoat.2009.10.05010.1016/j.surfcoat.2009.10.050 ↗
3. M. Villa, S. Dosta, and J.M. Guilemany, Optimization of 316L Stainless Steel Coatings on Light Alloys Using Cold Gas Spray, Surf. Coat. Technol., 2013, 235, p 220–225. https://doi.org/10.1016/j.surfcoat.2013.07.03610.1016/j.surfcoat.2013.07.036 ↗
4. A. Sova, S. Grigoriev, A. Okunkova, and I. Smurov, Cold Spray Deposition of 316L Stainless Steel Coatings on Aluminum Surface with Following Laser Post-Treatment, Surf. Coat. Technol., 2013, 235, p 283–289. https://doi.org/10.1016/j.surfcoat.2013.07.05210.1016/j.surfcoat.2013.07.052 ↗
5. J. Zhou, K. Ma, C.X. Li, M. Yasir, X.T. Luo, and C.J. Li, Microstructures of Aluminum Surfaces Reinforced with 316L Stainless Steel Particles via High-Speed Particle Injection and the Resulting Double Strengthening Mechanism, Surf. Coat. Technol., 2020, 385, 125380. https://doi.org/10.1016/j.surfcoat.2020.12538010.1016/j.surfcoat.2020.125380 ↗
6. W.G. Jiru, M.R. Sankar, and U.S. Dixit, Laser Surface Alloying of Copper, Manganese, and Magnesium with Pure Aluminum Substrate, J. Mater. Eng. Perform., 2016, 25, p 1172–1181. https://doi.org/10.1007/s11665-016-1922-x10.1007/s11665-016-1922-x ↗
7. W.G. Jiru, M.R. Sankar, and U.S. Dixit, Laser Surface Alloying of Aluminum for Improving Acid Corrosion Resistance, J. Inst. Eng. India Ser. C, 2019, 100, p 481–492. https://doi.org/10.1007/s40032-018-0452-810.1007/s40032-018-0452-8 ↗
8. N. Murugan and R.S. Parmar, Effects of MIG Process Parameters on the Geometry of the Bead in the Automatic Surfacing of Stainless Steel, J. Mater. Process. Technol., 1994, 41, p 381–398. https://doi.org/10.1016/0924-0136(94)90003-510.1016/0924-0136(94)90003-5 ↗
9. D. Deng, R. Chen, Q. Sun, and X. Li, Microstructural Study of 17–4PH Stainless Steel after Plasma-Transferred Arc Welding, Materials, 2015, 8, p 424–434. https://doi.org/10.3390/ma802042410.3390/ma8020424 ↗
10. K. Gurumoorthy, M. Kamaraj, K.P. Rao, and S. Venugopal, Microstructure and Wear Characteristics of Nickel Based Hardfacing Alloys Deposited by Plasma Transferred Arc Welding, Mater. Sci. Technol., 2006, 22, p 975–980. https://doi.org/10.1179/174328406X10073410.1179/174328406X100734 ↗
11. Z. Li, L. Chai, Y. Tang, C. Zhang, L. Qi, K. Zhang, C. Peng, and C. Huang, 316L Stainless Steel Repaired Layers by Weld Surfacing and Laser Cladding on a 27SiMn Steel: A Comparative Study of Microstructures, Corrosion, Hardness and Wear Performances, J. Mater. Res. Technol., 2023, 23, p 2043–2053. https://doi.org/10.1016/j.jmrt.2023.01.16210.1016/j.jmrt.2023.01.162 ↗
12. K. Kanishka and B. Acherjee, A Systematic Review of Additive Manufacturing-Based Remanufacturing Techniques for Component Repair and Restoration, J. Manuf. Process., 2023, 89, p 220–283. https://doi.org/10.1016/j.jmapro.2023.01.03410.1016/j.jmapro.2023.01.034 ↗
13. W.B. Lee, M. Schmuecker, U.A. Mercardo, G. Biallas, and S.B. Jung, Interfacial Reaction in Steel-Aluminum Joints Made by Friction Stir Welding, Scr. Mater., 2006, 55, p 355–358. https://doi.org/10.1016/j.scriptamat.2006.04.02810.1016/j.scriptamat.2006.04.028 ↗
14. K.J. Lee, S. Kumai, T. Arai, and T. Aizawa, Interfacial Microstructure and Strength of Steel/Aluminum Alloy Lap Joint Fabricated by Magnetic Pressure Seam Welding, Mater. Sci. Eng. A, 2007, 471, p 95–101. https://doi.org/10.1016/j.msea.2007.04.03310.1016/j.msea.2007.04.033 ↗
15. T. Murakami, K. Nakata, H. Tong, and M. Ushio, Dissimilar Metal Joining of Aluminum to Steel by MIG arc Brazing Using Flux Cored Wire, ISIJ Int., 2003, 43, p 1596–1602. https://doi.org/10.2355/isijinternational.43.159610.2355/isijinternational.43.1596 ↗
16. A. Mathieu, J. Viala, E. Cicala, S. Matte, and D. Grevey, Laser Brazing of a Steel /Aluminium Assembly with Hot Fiiler Wire(88% Al, 12% Si), Mater. Sci. Eng. A, 2006, 436, p 19–28. https://doi.org/10.1016/j.msea.2006.07.09910.1016/j.msea.2006.07.099 ↗
17. S. Meco, G. Pardal, A. Eder, and L. Quintino, Software Development for Prediction of the Weld Bead in CMT and Pulsed-MAG Processes, Int. J. Adv. Manuf. Technol., 2013, 64, p 171–178. https://doi.org/10.1007/s00170-012-3990-x10.1007/s00170-012-3990-x ↗
18. R. Cao, J.H. Chang, X.H. Zhu, G.J. Mao, Q.W. Xu, Y. Shi, J.H. Chen, and P.C. Wang, Investigation of Wire Selection for CMT Plug Joining Mg AZ31-to-Galvanized Steel, J. Manuf. Process., 2018, 32, p 65–76. https://doi.org/10.1016/j.jmapro.2018.01.02210.1016/j.jmapro.2018.01.022 ↗
19. P. Wang, R. Cao, J.H. Sun, and J.H. Chen, Cold Metal Transfer Joining of Aluminum AA6061-T6-to- Galvanized Boron Steel, J. Manuf. Sci. Eng., 2016, 136, p 1–10. https://doi.org/10.1115/1.402801210.1115/1.4028012 ↗
20. H.T. Zhang, J.C. Feng, and P. He, Interfacial Phenomena of Cold Metal Transfer (CMT) Welding of Zinc Coated Steel and Wrought Aluminium, Mater. Sci. Technol., 2008, 24, p 1346–1349. https://doi.org/10.1179/174328407X21315210.1179/174328407X213152 ↗
21. C.G. Pickin, and K. Young, Evaluation of Cold Metal Transfer (CMT) Process for Welding Aluminium Alloy, Sci. Technol. Weld. Join. Weld. Join., 2006, 11, p 583–586. https://doi.org/10.1179/174329306X12088610.1179/174329306X120886 ↗
22. G. Mou, X. Hua, D. Wu, Y. Huang, W. Lin, and P. Xu, Microstructure, and Mechanical Properties of Cold Metal Transfer Welding-Brazing of Titanium Alloy (TC4) to Stainless Steel (304L) Using V-Shaped Groove Joints, J. Mater. Process. Technol., 2018, 266, p 696–706. https://doi.org/10.1016/j.jmatprotec.2018.09.01910.1016/j.jmatprotec.2018.09.019 ↗
23. K. Furukawa, New CMT arc Welding Process – Welding of Steel to Aluminium Dissimilar Metals and Welding of Super-Thin Aluminium Sheets, Weld. Int., 2006, 20(6), p 440–445. https://doi.org/10.1533/wint.2006.359810.1533/wint.2006.3598 ↗
24. C.G. Pickin, S.W. Williams, and M. Lunt, Characterisation of the Cold Metal Transfer (CMT) Process and its Application for Low Dilution Cladding, J. Mater. Process. Technol., 2011, 211, p 496–502. https://doi.org/10.1016/j.jmatprotec.2010.11.00510.1016/j.jmatprotec.2010.11.005 ↗
25. Y. Zhao, Y. Jia, S. Chen, J. Shi, and F. Li, Process Planning Strategy for Wire-Arc Additive Manufacturing: Thermal Behavior Considerations, Addit. Manuf., 2020, 32, 100935. https://doi.org/10.1016/j.addma.2019.10093510.1016/j.addma.2019.100935 ↗
26. N.P. Kumar, S.A. Vendan, and N.S. Shanmugam, Investigations on the Parametric Effects of Cold Metal Transfer Process on the Microstructural Aspects in AA6061, J. Alloys Compd., 2016, 658, p 255–264. https://doi.org/10.1016/j.jallcom.2015.10.16610.1016/j.jallcom.2015.10.166 ↗
27. R.V. Talalaev, R. Veinthal, A. Laansoo, and M. Sarkans, COLD Metal Transfer (CMT) Welding of Thin Sheet Metal Products, Est. J. Eng., 2012, 18, p 243. https://doi.org/10.3176/ENG.2012.3.0910.3176/ENG.2012.3.09 ↗
28. P. Luchtenberg, P.T.D. Campos, P. Soares, C.A.H. Laurindo, O. Maranho, and R.D. Torres, Effect of Welding Energy on the Corrosion and Tribological Properties of Duplex Stainless-Steel Weld Overlay Deposited by GMAW/CMT Process, Surf. Coat. Technol., 2019, 375, p 688–693. https://doi.org/10.1016/j.surfcoat.2019.07.07210.1016/j.surfcoat.2019.07.072 ↗
29. H.T. Zhang, J.C. Feng, P. He, B.B. Zhang, J.M. Chen, and L. Wang, The Arc Characteristics and Metal Transfer Behaviour of Cold Metal Transfer and its use in Joining Aluminum to Zinc-Coated Steel, Mater. Sci. Eng. A, 2009, 499, p 111–113. https://doi.org/10.1016/j.msea.2007.11.12410.1016/j.msea.2007.11.124 ↗
30. R. Cao, G. Yu, J.H. Chen, and P.C. Wang, Cold Metal Transfer Joining Aluminium Alloys-to-Galvanized Mild Steel, J. Mater. Process. Technol., 2013, 213, p 1753–1763. https://doi.org/10.1016/j.jmatprotec.2013.04.00410.1016/j.jmatprotec.2013.04.004 ↗
31. G.D.J. Ram, A.V. Reddy, K.P. Rao, and M. Reddy, Microstructure and Mechanical Properties of Inconel 718 Electron Beam Welds, Mater. Sci. Technol., 2005, 21(10), p 1132–1138. https://doi.org/10.1179/174328405X6226010.1179/174328405X62260 ↗
32. G.H.S.F.L. Carvalho, G. Venturini, G. Campatelli, and E. Galvanetto, Development of Optimal Deposition Strategies for Cladding of Inconel 625 on Carbon Steel usIng Wire Arc Additive Manufacturing, Surf. Coat. Technol., 2023, 453, p 129128. https://doi.org/10.1016/j.surfcoat.2022.12912810.1016/j.surfcoat.2022.129128 ↗
33. T.B. Thiagarajan, D. Raguraman, and S. Ponnusamy, Optimization of CMT Welding Parameters of Stellite-6 on AISI316L Alloy Using TOPSIS Method, IJIE, 2023, 15, p 161–172.
34. H. Raushan, A. Bansal, V. Singh, A.K. Singla, J. Singla, A. Omer, J. Singh, D.K. Goyal, N. Khanna, and R.S. Rooprai, Dry Sliding and Slurry Abrasion Behaviour of Wire Arc Additive Manufacturing – Cold Metal Transfer (WAAM-CMT) Cladded Inconel 625 on EN8 Steel, Tribol. Int., 2023, 179, 108176. https://doi.org/10.1016/j.triboint.2022.10817610.1016/j.triboint.2022.108176 ↗
35. I. Bunaziv, X. Ren, A.B. Hagen, E.W. Hovig, I. Jevremovic, and S.G. Dahl, Laser Beam Remelting of Stainless Steel Plate for Cladding and Comparison with Conventional CMT Process, Int. J. Adv. Manuf. Technol., 2023, 127, p 911–934. https://doi.org/10.1007/s00170-023-11567-y10.1007/s00170-023-11567-y ↗
36. G. Lorenzin and G. Rutili, The Innovative use of Low Heat Input in Welding: Experiences on ‘Cladding’ and Brazing Using the CMT Process, Weld. Inter., 2009, 23(8), p 622–632. https://doi.org/10.1080/0950711080254325210.1080/09507110802543252 ↗
37. G.P. Rajeev, M. Kamaraj, and R.S. Bakshi, Comparison of Microstructure, Dilution and Wear Behavior of Stellite 21 Hardfacing on H13 Steel Using Cold Metal Transfer and Plasma Transferred Arc Welding Processes, Surf. Coat. Technol., 2019, 375, p 383–394. https://doi.org/10.1016/j.surfcoat.2019.07.01910.1016/j.surfcoat.2019.07.019 ↗
38. G.P. Rajeev, M. Kamaraj, and R.S. Bakshi, Hardfacing of AISI H13 Tool Steel with Stellite 21 Alloy Using Cold Metal Transfer Welding Process, Surf. Coat. Technol., 2017, 326, p 63–71. https://doi.org/10.1016/j.surfcoat.2017.07.05010.1016/j.surfcoat.2017.07.050 ↗
39. T.B. Thiagarajan and S. Ponnusamy, Effect of Cladding of Stellite-6 Filler Wire on the Surface of ss316l Alloy Through Cold Metal Arc Transfer Process, J. Met. Mater. Miner., 2021, 31(3), p 70–84.10.55713/jmmm.v31i3.1197 ↗
40. P. Varghese, E. Vetrivendan, M.K. Dash, S. Ningshen, M. Kamaraj, and U.K. Mudali, Weld Overlay Coating of Inconel 617M on Type 316 L Stainless Steel by Cold Metal Transfer Process, Surf. Coat. Technol., 2019, 357, p 1004–1013. https://doi.org/10.1016/j.surfcoat.2018.10.07310.1016/j.surfcoat.2018.10.073 ↗
41. A. Evangeline and P. Sathiya, Cold Metal Arc Transfer (CMT) Metal Deposition of Inconel 625 Superalloy on 316L Austenitic Stainless Steel: Microstructural Evaluation, Corrosion and Wear Resistance Properties, Mater. Res. Express., 2019, 6, 066516. https://doi.org/10.1088/2053-1591/ab0a1010.1088/2053-1591/ab0a10 ↗
42. O.T. Ola and F.E. Doern, A Study of Cold Metal Transfer Clads in Nickel-Base INCONEL 718 Superalloy, Mater. Des., 2014, 57, p 51–59. https://doi.org/10.1016/j.matdes.2013.12.06010.1016/j.matdes.2013.12.060 ↗
43. H. Kun, D. Lijin, W. Qinying, Z. Huali, L. Yufei, L. Li, and Z. Zhi, Comparison on the Microstructure and Corrosion behavior of Inconel 625 Cladding Deposited by Tungsten Inert Gas and Cold Metal Transfer Process, Surf. Coat. Technol., 2022, 435, 128245. https://doi.org/10.1016/j.surfcoat.202210.1016/j.surfcoat.2022 ↗
44. X. Tang, S. Zhang, X. Cui, C. Zhang, Y. Liu, and J. Zhang, Tribological and Cavitation Erosion Behaviors of Nickel-Based and Iron-Based Coatings Deposited on AISI 304 Stainless Steel by Cold Metal Transfer, J. Mater. Res. Technol., 2020, 9, p 6665–6681. https://doi.org/10.1016/j.jmrt.2020.04.06410.1016/j.jmrt.2020.04.064 ↗
45. S. Monika, K. Agnieszka, R. Agnieszka, and R. Bogdan, Microstructure, Microsegregation and Nanohardness of CMT Clad Layers of Ni-Base Alloy on 16Mo3 Steel, J. Alloys Compd., 2018, 751, p 86–95. https://doi.org/10.1016/j.jallcom.201810.1016/j.jallcom.2018 ↗
46. G.P. Rajeev, M. Kamaraj, and R.S. Bakshi, Al-Si-Mn Alloy Coating on Aluminum Substrate Using Cold Metal Transfer (CMT) Welding Technique, JOM, 2014, 66, p 1061–1067. https://doi.org/10.1007/s11837-014-0970-710.1007/s11837-014-0970-7 ↗
47. Z. Bowen, W. Chao, W. Zhaohui, Z. Laiqi, and G. Qiang, Microstructure and Properties of Al Alloy ER5183 Deposited by Variable Polarity Cold Metal Transfer, J. Mater. Process. Technol., 2019, 267, p 167–176. https://doi.org/10.1016/j.jmatprotec.2018.12.01110.1016/j.jmatprotec.2018.12.011 ↗
48. B. Das, B.N. Panda, and U.S. Dixit, Microstructure, and Mechanical Properties of ER70S-6 Alloy Cladding on Aluminum Using a Cold Metal Transfer Process, J. Mater. Eng. Perform., 2022, 31, p 9385–9398. https://doi.org/10.1007/s11665-022-06937-810.1007/s11665-022-06937-8 ↗
49. F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Koçak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(24), p 6770–6782. https://doi.org/10.1016/j.surfcoat.200510.1016/j.surfcoat.2005 ↗
50. V. Luzin, K. Spencer, and M.X. Zhang, Residual Stress and Thermo-Mechanical Properties of Cold Spray Metal Coatings, Acta Mater., 2011, 59(3), p 1259–1270. https://doi.org/10.1016/j.actamat.201010.1016/j.actamat.2010 ↗
51. R. Ghelichi, S. Bagherifard, D. MacDonald, I. Fernandez-Pariente, B. Jodoin, and M. Guagliano, Experimental and Numerical Study of Residual Stress Evolution in Cold Spray Coating, Appl. Surf. Sci., 2014, 288, p 26–33. https://doi.org/10.1016/j.apsusc.201310.1016/j.apsusc.2013 ↗
52. S. Prakash, R. John Felix Kumar, and S. Jerome, Effect of Heat Treatment on Microstructure and Mechanical Properties of CMT Welded Aluminium Alloy 2024, Mater. Today Proc., 2018, 5(13), p 26997–27003. https://doi.org/10.1016/j.matpr.201810.1016/j.matpr.2018 ↗
53. P. Kah, R. Suoranta, and J. Martikainen, Advanced Gas Metal Arc Welding Processes, Int. J. Adv. Manuf. Technol., 2013, 67, p 655–674. https://doi.org/10.1007/s00170-012-4513-510.1007/s00170-012-4513-5 ↗
54. F. Jicai, Z. Hongtao, and H. Peng, The CMT Short-Circuiting Metal Transfer Process and its use in Thin Aluminium Sheets Welding, Mater. Des., 2009, 30, p 1850–1852. https://doi.org/10.1016/j.matdes.2008.07.01510.1016/j.matdes.2008.07.015 ↗
55. J.T.M.D. Hasson and L.D.M.V. Otterloo, Surface Engineering with Lasers: Application to Co Based Materials, Surf. Eng., 1997, 13, p 471–482. https://doi.org/10.1179/sur.1997.13.6.47110.1179/sur.1997.13.6.471 ↗
56. T. Zhao, S. Zhang, Z.Y. Wang, C.H. Zhang, Y. Liu, and C.L. Wu, Modulating Heat Input to Optimize Corrosion and Synergistic Cavitation Erosion-Corrosion Behavior of Ni201 Cladding Layer by Cold Metal Transfer, Surf. Coat. Technol., 2022, 443, 128595. https://doi.org/10.1016/j.surfcoat.2022.12859510.1016/j.surfcoat.2022.128595 ↗
57. W. Meng, Y. Lei, X. Wang, Q. Ma, Hu. Lei, Hu. Xie, and X. Yin, Interface Characteristics and Mechanical Properties of Wire-Arc Depositing Inconel 625 Superalloy on Ductile Cast Iron, Surf. Coat. Technol., 2022, 440, 128493. https://doi.org/10.1016/j.surfcoat.2022.12849310.1016/j.surfcoat.2022.128493 ↗
58. S. Gejendhiran, A. Karpagaraj, D.V. Kumar, R. Dhanusuraman, and N. Annamalai, Experimental Investigations on Inconel 718 Hard-Faced Layer Deposited Over SS304 Using Cold Metal Transfer, Surf. Coat. Technol., 2023, 468, 129739. https://doi.org/10.1016/j.surfcoat.2023.12973910.1016/j.surfcoat.2023.129739 ↗
59. H. Zhang, S. Hu, Z. Wang, and Y. Liang, The Effect of Welding Speed on Microstructures of Cold Metal Transfer Deposited AZ31 Magnesium Alloy Clad, Mater. Des., 2015, 86, p 894–901. https://doi.org/10.1016/j.matdes.2015.07.14310.1016/j.matdes.2015.07.143 ↗
60. C. Baoqiang, Q. Ruijie, Q. Bojin, and D. Jialuo, Influence of Cold Metal Transfer Process and its Heat Input on Weld Bead Geometry and Porosity of Aluminum-Copper Alloy Welds, Rare Metal. Mater. Eng., 2016, 45(3), p 606–611. https://doi.org/10.1016/S1875-5372(16)30080-710.1016/S1875-5372(16)30080-7 ↗
61. J. Ning, Z.S. Yu, K. Sun, M.J. Hu, L.X. Zhang, Y.B. Zhang, and L.J. Zhang, Comparison of Microstructures and Properties of X80 Pipeline Steel Additively Manufactured Based on Laser Welding with Filler Wire and Cold Metal Transfer, J. Mater. Res. Technol., 2021, 10, p 752–768. https://doi.org/10.1016/j.jmrt.2020.12.02110.1016/j.jmrt.2020.12.021 ↗
62. Y. Liang, S. Hu, J. Shen, H. Zhang, and P. Wang, Geometrical and Microstructural Characteristics of the TIG-CMT Hybrid Welding in 6061 Aluminum Alloy Cladding, J. Mater. Process. Technol., 2017, 239, p 18–30. https://doi.org/10.1016/j.jmatprotec.2016.08.00510.1016/j.jmatprotec.2016.08.005 ↗
63. A. Benoit, S. Jobez, P. Paillard, V. Klosek, and T. Baudin, Study of Inconel 718 Weldability Using MIG CMT Process, Sci. Technol. Weld. Join., 2011, 16, p 477–482. https://doi.org/10.1179/1362171811Y.000000003110.1179/1362171811Y.0000000031 ↗
64. M.R. Gornikowska, S. Dymek, M. Blicharski, Ł Cieniek, and J. Kusinski, Microstructure of 309 and 310 Austenitic Stainless Steel CMT Overlays on the 16Mo3 Pressure Vessel Steel, Arch. Metall. Mater., 2021, 66, p 645–649. https://doi.org/10.24425/amm.2021.13590210.24425/amm.2021.135902 ↗
65. M.R. Górnikowska, J. Kusiński, G. Cempura, and J. Morgiel, Microstructure and Phase Composition of Transition Zone Between Low Alloyed Steel Boiler Tube and an Austenitic Stainless-Steel Weld Overlay Produced by Cold Metal Transfer Method, Int. J. Press. Vessels Pip., 2023, 203, 104951. https://doi.org/10.1016/j.ijpvp.2023.10495110.1016/j.ijpvp.2023.104951 ↗
66. M. Ahsan, Y.R. Kim, C.H. Kim, J.W. Kim, R. Ashiri, and Y.D. Park, Porosity Formation Mechanisms in Cold Metal Transfer (CMT) Gas Metal Arc Welding (GMAW) of Zinc Coated Steels, Sci. Technol. Weld. Join., 2016, 21, p 209–215. https://doi.org/10.1179/1362171815Y.000000008410.1179/1362171815Y.0000000084 ↗
67. M. Ahsan, Y.R. Kim, R. Ashiri, Y.J. Cho, C. Jeong, and Y.D. Park, Cold Metal Transfer (CMT) GMAW of Zinc Coated Steel, Weld. J., 2016, 95, p 120–132.
68. T. Zhu, Z.W. Chen, and W. Gao, Incipient Melting in Partially Melted Zone During Arc Welding of AZ91D Magnesium Alloy, Mater. Sci. Eng. A, 2006, 416, p 246–252. https://doi.org/10.1016/j.msea.2005.10.03210.1016/j.msea.2005.10.032 ↗
69. J. Liao, N. Yamamoto, and K. Nakata, Gas Tungsten Arc Welding of Fine-Grained AZ31B Magnesium alloys Made by Powder Metallurgy, Mater. Des., 2014, 56, p 460–467. https://doi.org/10.1016/j.matdes.2013.11.06110.1016/j.matdes.2013.11.061 ↗
70. L. Liu, D. Ren, and F. Liu, A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys, Materials (Basel), 2014, 7(5), p 3735–3757. https://doi.org/10.3390/ma705373510.3390/ma7053735 ↗
71. O.H. Madsen, New technologies for waste to energy plants 4th international symposium on Waste Treatment Technologies, Symp. A Q. J. Mod. Foreign Lit, 2003, p 1−12.
72. M.D. Nguyen, J.W. Bang, A.S. Bin, S.R. Kim, Y. Kim, K.H. Hwang, V.H. Pham, and W.T. Kwon, Novel Polymer-Derived Ceramic Environmental Barrier coating System for Carbon Steel in Oxidizing Environments, J. Eur. Ceram. Soc., 2017, 37, p 2001–2010. https://doi.org/10.1016/j.jeurceramsoc.2016.12.04910.1016/j.jeurceramsoc.2016.12.049 ↗
73. S. Monika, P. Paweł, and R. Agnieszka, The Microstructure of Weld Overlay Ni-Base Alloy Deposited on Carbon Steel by CMT Method, SSP., 2015 https://doi.org/10.4028/www.scientific.net/ssp.231.11910.4028/www.scientific.net/ssp.231.119 ↗
74. S. Monika, K. Mateusz, K. Jan, K. Aga, and R. Agnieszka, Erosive Wear of Inconel 625 Alloy Coatings Deposited by CMT Method, Arch. Metall. Mater., 2016 https://doi.org/10.1515/amm-2016-019910.1515/amm-2016-0199 ↗
75. S. Monika, Investigation of Ni-Base Coatings After Corrosion Test, Inżynieria Materiałowa, 2016 https://doi.org/10.15199/28.2016.4.710.15199/28.2016.4.7 ↗
76. S. Monika, K. Aga, P. Paweł, and R. Agnieszka, Microstructure, Chemical and Phase Composition of Clad Layers of Inconel 625 and Inconel 686, Arch. Metall. Mater., 2018 https://doi.org/10.24425/11896910.24425/118969 ↗
77. M.R. Gornikowska, M. Blicharski, and J. Kusinski, Influence of Weld Overlaying Methods on Microstructure and Chemical Composition of Inconel 625 Boiler Pipe Coatings, Kov. Mater., 2014, 52, p 146–147. https://doi.org/10.4149/km_20143_14110.4149/km_20143_141 ↗
78. M.R. G’ornikowska, L. Cieniek, M. Blicharski, and J. Kusinski, Microstructure and Microsegregation of an Inconel 625 Weld Overlay Produced on Steel Pipes by the Cld Metal Transfer Technique, Arch. Metall. Mater., 2014, 59, p 1081–1084. https://doi.org/10.2478/amm-2014-018510.2478/amm-2014-0185 ↗
79. M.R. Gornikowska and M. Blicharski, TEM Microstructure and Chemical Composition of Transition Zone Between Steel Tube and an Inconel 625 weld Overlay Coating Produced by CMT Method, Arch. Metall. Mater., 2017, 62, p 787–793. https://doi.org/10.1515/amm-2017-011710.1515/amm-2017-0117 ↗
80. M.R. Gornikowska, M. Blicharski, J. Kusinski, L. Kusinski, and M. Marszycki, Influence of Boiler Pipe Cladding Techniques on Their Microstructure and Properties, Arch. Metall. Mater., 2013, 58, p 1093–1096. https://doi.org/10.2478/AMM-2913-013110.2478/AMM-2913-0131 ↗
81. M.R. Gornikowska and M. Blicharski, Microsegregation and Precipites in Inconel 625 Arc Weld Overlay Coatings on Boiler Pipes, Arch. Metall. Mater., 2015, 60, p 2599–2605. https://doi.org/10.1515/amm-2015-042010.1515/amm-2015-0420 ↗
82. P. Pawel, M. Blicharski, S. Dymek, and M. Solecka, Electron Microscopy Investigation of Inconel 625 Weld Overlay on Boiler Steel, Solid State Phenom., 2015, 231, p 113–118. https://doi.org/10.4028/www.scientific.net/ssp.231.11310.4028/www.scientific.net/ssp.231.113 ↗
83. P. Paweł, K. Kazimierz, and M. Blicharski, Analysis of Phase Transformations in Inconel 625 Alloy during Annealing, Acta Phys. Pol., A, 2016, 130, p 1041–1044. https://doi.org/10.12693/APhysPolA.130.104110.12693/APhysPolA.130.1041 ↗
84. K.R. Mishra, H. Kumar, G. Harmain, and S. Albert, Wear Performance of Ni-Cr-B-Si Hardface Coatings Fabricated by Cold Metal Transfer Welding, Proc. Inst. Mech. Eng. Part C., 2022, 236(3), p 1850–1860. https://doi.org/10.1177/0954406221102308510.1177/09544062211023085 ↗
85. T. Zhao, S. Zhang, Z.Y. Wang, C.H. Zhang, D.X. Zhang, N.W. Wang, and C.L. Wu, Cavitation Erosion/Corrosion Synergy and Wear Behaviors of Nickel-Based Alloy Coatings on 304 Stainless Steel Prepared by Cold Metal Transfer, Wear, 2022, 510–511, 204510. https://doi.org/10.1016/j.wear.2022.20451010.1016/j.wear.2022.204510 ↗
86. T. Zhao, S. Zhang, C.H. Zhang, X.Y. Sun, X.L. Bai, and C.L. Wu, The Effect of Ni201 Transition Layer on the Corrosion, Wear and Synergetic Cavitation Erosion-Corrosion Behavior of CMT-Monel K500 Coating, Surf. Coat. Technol., 2023, 463, 129507. https://doi.org/10.1016/j.surfcoat.2023.12950710.1016/j.surfcoat.2023.129507 ↗
87. L. Dong, Z. Shi, Y. Zhang, S. Wang, Q. Wang, and L. Liu, Microstructure and Sulfide Stress Corrosion Cracking of the Inconel 625/X80 Weld Overlay Fabricated by Cold Metal Transfer Process, Int. J. Hydrog. Energy, 2022, 47, p 29113–29130. https://doi.org/10.1016/j.ijhydene.2022.06.21010.1016/j.ijhydene.2022.06.210 ↗
88. S. Wu, J. Feng, F. Cheng, Z. Wang, and D. Wang, Research on Root Appearance and Fatigue Life of Steel Catenary Riser (SCR) Using GMAW/GTAW-P Double-Sided Root Welding Process, Int. J. Press. Vessels Pip., 2023, 201, 104866. https://doi.org/10.1016/j.ijpvp.2022.10486610.1016/j.ijpvp.2022.104866 ↗
89. G. Toguyeni, N. Pepe, G. Barritte, J. Banse, T. Schmidt, R. Jones,, and J. Mair, High Strength Carbon Steel and CRA Lined Pipe for Reel-lay Installation, 2013, Offshore Technology Conference. https://doi.org/10.4043/24053-MS10.4043/24053-MS ↗
90. Y. Zhou and Q. Lin, Wetting of Galvanized Steel by Al 4043 Alloys in the First Cycle of CMT Process, J. Alloys Compd., 2014, 589, p 307–313. https://doi.org/10.1016/j.jallcom.2013.11.17710.1016/j.jallcom.2013.11.177 ↗
91. R. Cao, J.H. Sun, J.H. Chen, and P. Wang, Cold Metal Transfer Joining of Aluminum AA6061-T6-to-Galvanized Boron Steel, ASME, J. Manuf. Sci. Eng., 2014, 136(5), p 051015. https://doi.org/10.1115/1.402801210.1115/1.4028012 ↗
92. R. Cao, C.H. Sun, J.H. Chen, and P. Wang, Weldability of CMT Joining of AA6061-T6 to Boron Steels with Various Coatings, Weld. J., 2014, 93, p 193–204.
93. B. Das, B.N. Panda, and U.S. Dixit, Corrosion Behavior and its Effect on Mechanical Properties of ER70S-6 Cladding on AA 6061–T6 Alloy Using a Cold Metal Transfer Process, Low Cost Manufacturing Technologies. NERC. S.N. Joshi, U.S. Dixit, R.K. Mittal, S. Bag Ed., Springer, Singapore, 2022
94. J. Tapiola, J. Tuominen, J. Vihinen et al., Sliding Wear Behavior of Cold Metal Transfer Cladded Stellite 12 Hardfacings on Martensitic Stainless Steel, Weld World, 2023, 67, p 573–584. https://doi.org/10.1007/s40194-022-01390-610.1007/s40194-022-01390-6 ↗
95. S. Prakash, R. John Felix Kumar, and S. Jerome, Effect of Heat Treatment on Microstructure and Mechanical Properties of CMT Welded Aluminium Alloy 2024, Mater. Today: Proc., 2018, 5(13), p 26997–27003. https://doi.org/10.1016/j.matpr.201810.1016/j.matpr.2018 ↗
96. R. Ahmad and M.A. Bakar, Effect of a Post-Weld Heat Treatment on the Mechanical and Microstructure Properties of AA6061 Joints Welded by the Gas Metal Arc Welding Cold Metal Transfer Method, Mater. Des., 2011, 32(10), p 5120–5126. https://doi.org/10.1016/j.matdes.201110.1016/j.matdes.2011 ↗
97. S. Yang, J. Zhang, J. Lin, and Y. Lei, Welding of Aluminum Alloy to Zinc Coated Steel by Cold Metal Transfer, Mater. Des., 2013, 2013(49), p 602–612. https://doi.org/10.1016/j.matdes.201310.1016/j.matdes.2013 ↗
98. B. Das, B.N. Panda, and U.S. Dixit, Effects of Heat Treatment on the Mechanical Properties of Fe-Based ER70S-6 Cladding on Aluminum Substrate Using Cold Metal Transfer Process, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-07975-610.1007/s11665-023-07975-6 ↗
99. R.K. Mishra, H. Kumar, G. Harmain, and S.K. Albert, Comparative Wear Behaviour of Ni-Cr-B-Si Hardface Coatings Made by Cold Metal Transfer and Plasma Transfer Arc Welding Processes, Proc. Inst. Mech. Eng. Part L, 2023, 237(1), p 92–106. https://doi.org/10.1177/1464420722110351710.1177/14644207221103517 ↗
100. W. Meng, Y. Lei, X. Wang, Q. Ma, X. Yin, and Y. Hong, Interface Characteristics and Properties of Nickel-Based Alloy Coatings on Cast Iron Fabricated by Plasma and Cold Metal Transfer Wire-Arc Deposition, Weld World, 2023 https://doi.org/10.1007/s40194-023-01547-x10.1007/s40194-023-01547-x ↗