Engineering Framework for Assessing Materials and Processes for In-Space Manufacturing
Source abstract
Abstract
Abstract In-space manufacturing is a candidate approach for constructing next-generation space structures with larger characteristic dimensions than modern deployable structures. While many construction methods have been proposed, analysis of their performance for building precision structures, such as large-diameter reflectors, is scarce. In this paper, we present a quantitative, system-level comparison of materials and processes for in-space manufacturing. By using performance metrics for thermal stability, resistance to disturbance loads, and minimal-mass buckling strength, we identify candidate feedstock materials. Then, using the metrics of energy consumption and accuracy, we compare candidate processing methods and find that deformation processing is a promising on-orbit manufacturing method. We synthesize the analysis with a case study on the construction of a tetrahedral truss supporting a reflector surface and provide guidelines for assessing materials and processes for in-space manufacturing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Space Satellite Systems and Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. R.V. Powell, “A Future for Large Space Antennas,” 7th Communications Satellite Systems Conference, April 24–27, 1978 (San Diego, CA), AIAA, 1978, p 407–41410.2514/6.1978-588 ↗
2. J.M. Hedgepeth and L.R. Adams, “Design Concepts for Large Reflector Antenna Structures,” 1983, NASA Contractor Report 3663.
3. R.A. Russell, T.G. Campbell, and R.E. Freeland, “A Technology Development Program for Large Space Antennas,” Inter. Astronautical Congr. of the Intern. Astronautical Federation, September 22–29, 1980 (Tokyo, Japan), NASA Technical Memorandum 81902.
4. M.S. Lake, L.D. Peterson, and M.B. Levine, Rationale for Defining Structural Requirements for Large Space Telescopes, J. Spacecr. Rocket., 2002, 39(5), p 674–681. https://doi.org/10.2514/2.388910.2514/2.3889 ↗
5. P.E. Glaser, Power from the Sun: Its Future, Science, 1968, 162, p 857–861. https://doi.org/10.1126/science.162.3856.85710.1126/science.162.3856.857 ↗
6. R.H. MacNeal, J.M. Hedgepeth, and H.U. Schuerch, “Heliogyro Solar Sailer Summary Report,” 1969, NASA Contractor Report 1329.
7. B.H. Lambrigtsen, S.T. Brown, S.J. Dinardo, T.C. Gaier, P.P. Kangaslahti, and A.B. Tanner, “GeoSTAR: A Geostationary Microwave Sounder for the Future,” Proc. SPIE 6677, Earth Observing Systems XII, September 27, 2007 (San Diego, CA), SPIE, 2007, p 66771B. https://doi.org/10.1117/12.73193310.1117/12.731933 ↗
8. M. Arya, N. Lee, and S. Pellegrino, “Ultralight Structures for Space Solar Power Satellites,” 3rd AIAA Spacecraft Structures Conference, January 4–8, 2016 (San Diego, CA), AIAA, 2016. https://doi.org/10.2514/6.2016-195010.2514/6.2016-1950 ↗
9. H.L. Eaker, “Significant Electronic Applications and Experimental Results from Project Echo,” WESCON/65, August 24–27, 1965 (San Francisco, CA), NASA Technical Memorandum X-733-65-448.
10. R.E. Freeland, G.D. Bilyeu, G.R. Veal, M.D. Steiner, and D.E. Carson, Large Inflatable Deployable Antenna Flight Experiment Results, Acta Astronaut., 1997, 41(4), p 267–277. https://doi.org/10.1016/S0094-5765(98)00057-510.1016/S0094-5765(98)00057-5 ↗
11. J.F. Garibotti, A.J. Cwiertny, and R. Johnson, On Orbit Fabrication and Assembly of Large Space Structural Subsystems, Acta Astronaut., 1980, 7(7), p 847–865. https://doi.org/10.1016/0094-5765(80)90075-210.1016/0094-5765(80)90075-2 ↗
12. J.J. Watson, T.J. Collins, and H.G. Bush, “A History of Astronaut Construction of Large Space Structures at NASA Langley Research Center,” Proc. IEEE Aerospace Conference, March 9–16, 2002 (Big Sky, MT), IEEE, 2002, 7-3569–7-3587. https://doi.org/10.1109/AERO.2002.1035334.10.1109/AERO.2002.1035334 ↗
13. Grumman Aerospace Corp., “Space Fabrication Demonstration System: Final Report, Technical Volume,” Bethpage, NY, 1979, NASA Report N79-29213.
14. L. Browning and J.B. Hunt, “Space Construction Automated Fabrication Experiment Definition Study (SCAFEDS): Final Report, Volume II, Study Results,” San Diego, 1978, NASA Contractor Report 160288.
15. S. Ahmed and J.F. Clemmet. “Requirements, Design and Development of Large Space Antenna Structures,” 49th Structures and Materials Panel Meeting, October 7–12, 1979 (Porz-Wahn, Germany), NATO, 1980.
16. T. Murphey, “Historical Perspectives on the Development of Deployable Reflectors,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, May 4–7, 2009 (Palm Springs, CA), AIAA, 2009. https://doi.org/10.2514/6.2009-260510.2514/6.2009-2605 ↗
17. K. Miura and Y. Miyazaki, Concept of the Tension Truss Antenna, AIAA J., 1990, 28(6), p 1098–1104. https://doi.org/10.2514/3.2517210.2514/3.25172 ↗
18. E.O. Adams and C.N. Irvine, “MSFC Evaluation of the Space Fabrication Demonstration System (Beam Builder),” Marshall Space Flight Center, 1981, NASA Technical Memorandum 82440.
19. A. Brinkmeyer, S. Pellegrino, and P.M. Weaver, Effects of Long-term Stowage on the Deployment of Bistable Tape Springs, J. Appl. Mech., 2016, 83(1), 011008. https://doi.org/10.1115/1.403161810.1115/1.4031618 ↗
20. J.A. Banik, “Realizing Large Structures in Space,” 2015 US Frontiers of Engineering, September 9–11, 2015 (Irvine, CA), National Academy of Engineering.
21. K. Taminger and R.A. Hafley, “Electron Beam Freeform Fabrication: A Rapid Metal Deposition Process,” Proc. 3rd Automotive Composites Conference, September 9–10, 2003 (Troy, MI), Society of Plastics Engineers, 2003
22. J. Kugler, J. Cherston, E.R. Joyce, P. Shestople, and M.P. Snyder, “Applications for the Archinaut In Space Manufacturing and Assembly Capability,” AIAA SPACE and Astronautics Forum and Exposition, September 12–14, 2017 (Orlando, FL), AIAA, 2017. https://doi.org/10.2514/6.2017-536510.2514/6.2017-5365 ↗
23. B. Levedahl, R. Hoyt, J. Gorges, T. Silagy, N. Britton, G. Jimmerson, M. Bodnar, and J. Slostad, “TrusselatorTM Technology for In-Situ Fabrication of Solar Array Support Structures,” 2018 AIAA Spacecraft Structures Conference, January 8–12, 2018 (Kissimmee, FL), AIAA, 2018. https://doi.org/10.2514/6.2018-220310.2514/6.2018-2203 ↗
24. Kleos Space, “Futurism,” https://kleos.space/futrism/. Accessed 4 October 2021.
25. J.M. Hedgepeth, Accuracy Potentials for Large Space Antenna Reflectors with Passive Structure, J. Spacecr. Rocket., 1982, 19(3), p 211–217. https://doi.org/10.2514/3.6223910.2514/3.62239 ↗
26. M.M. Mikulas, “Structural Efficiency of Long Lightly Loaded Truss and Isogrid Columns for Space Applications,” 1978, NASA Technical Memorandum 78687.
27. M.F. Ashby, “Materials Selection in Mechanical Design,” 4th ed., Elsevier Ltd., 2011.10.1016/B978-1-85617-663-7.00005-9 ↗
28. H.G. Bush, M.M. Mikulas, and W.L. Heard, Some Design Considerations for Large Space Structures, AIAA J., 1978, 16(4), p 352–359. https://doi.org/10.2514/3.6089710.2514/3.60897 ↗
29. D. Cebon and N.F. Ashby, Materials Selection for Precision Instruments, Meas. Sci. Technol., 1994, 5(3), p 296–306. https://doi.org/10.1088/0957-0233/5/3/01410.1088/0957-0233/5/3/014 ↗
30. Ansys Granta EduPack software, ANSYS, Inc., Cambridge, UK, 2021.
31. H.P. Stahl, L.D. Feinberg, and S.C. Texter, “JWST primary mirror material selection,” Proc. SPIE 5487, Optical, Infrared, and Millimeter Space Telescopes, October 12, 2004 (Glasgow, UK), SPIE, 2004, p 818–824. https://doi.org/10.1117/12.54958210.1117/12.549582 ↗
32. M. Straubel, J. Block, M. Sinapius, and C. Hühne, “Deployable Composite Booms for Various Gossamer Space Structures,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, April 4–7, 2011 (Denver, CO), AIAA, 2011. https://doi.org/10.2514/6.2011-202310.2514/6.2011-2023 ↗
33. M.K. Chamberlain, S.H. Kiefer, and J. Banik, “On-orbit structural dynamics performance of the roll-out solar array,” 2018 AIAA Spacecraft Structures Conference, January 8–12, 2018 (Kissimmee, FL), AIAA, 2018. https://doi.org/10.2514/6.2018-194210.2514/6.2018-1942 ↗
34. L. Johnson, M. Whorton, A. Heaton, R. Pinson, G. Laue, and C. Adams, NanoSail-D: A Solar Sail Demonstration Mission, Acta Astronaut., 2011, 68(5–6), p 571–575. https://doi.org/10.1016/j.actaastro.2010.02.00810.1016/j.actaastro.2010.02.008 ↗
35. Materion Corp., “SupremEX Metal Matrix Composites Improve Precision in Space and Defense Systems,” https://materion.com/products/metal-matrix-composites/supremex/space-defense-and-optical-systems. Accessed 4 October 2021.
36. NASA, “On-Orbit Servicing, Assembly, and Manufacturing 2 (OSAM-2),” https://www.nasa.gov/mission_pages/tdm/osam-2.html. Accessed 4 October 2021.
37. T. Gutowski, S. Jiang, D. Cooper, G. Corman, M. Hausman, J. Manson, T. Schudeleit, K. Wegener, M. Sabelle, J. Ramos-Grez, and D.P. Sekulic, Note on the Rate and Energy Efficiency Limits for Additive Manufacturing: Rate and Energy Efficiency Limits for AM, J. Ind. Ecol., 2017, 21(S1), p S69–S79. https://doi.org/10.1111/jiec.1266410.1111/jiec.12664 ↗
38. Z. Liu, Q. Jiang, F. Ning, H. Kim, W. Cong, C. Xu, and H. Zhang, Investigation of Energy Requirements and Environmental Performance for Additive Manufacturing Processes, Sustainability, 2018, 10(10), p 3606. https://doi.org/10.3390/su1010360610.3390/su10103606 ↗
39. S.W. Tsai and H.T. Hahn, Introduction to Composite Materials, Technomic Publishing Co., Inc., Pennsylvania, 1980.
40. J.A. Schey, Introduction to Manufacturing Processes, McGraw-Hill Inc., New York, 1977.
41. A. Deignan, L. Figiel, and M.A. McCarthy,Insights into Complex Rheological Behaviour of Carbon Fibre/PEEK from a Novel Numerical Methodology Incorporating Fibre Friction and Melt Viscosity, Compos. Struct., 2018, 189, p 614–626. https://doi.org/10.1016/j.compstruct.2018.01.08410.1016/j.compstruct.2018.01.084 ↗
42. H.G. Bhundiya, F. Royer, and Z. Cordero, “Compressive behavior of isogrid columns fabricated with bend-forming,” AIAA Scitech 2022 Forum, January 3–7, 2022 (San Diego, CA), AIAA, 2022. https://doi.org/10.2514/6.2022-226310.2514/6.2022-2263 ↗
43. J.M. Hedgepeth, Influence of Fabrication Tolerances on the Surface Accuracy of Large Antenna Structures, AIAA J., 1982, 20(5), p 680–686. https://doi.org/10.2514/3.793610.2514/3.7936 ↗
44. A. Boschetto and L. Bottini, Accuracy Prediction in Fused Deposition Modeling, Int. J. Adv. Manuf. Technol., 2014, 73(5–8), p 913–928. https://doi.org/10.1007/s00170-014-5886-410.1007/s00170-014-5886-4 ↗
45. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu, The Metallurgy and Processing Science of Metal Additive Manufacturing, Int. Mater. Rev., 2016, 61(5), p 315–360. https://doi.org/10.1080/09506608.2015.111664910.1080/09506608.2015.1116649 ↗
46. R. Hafley, K. Taminger, and R. Bird, “Electron Beam Freeform Fabrication in the Space Environment,” 45th AIAA Aerospace Sciences Meeting and Exhibit, January 8–11, 2007 (Reno, NV), AIAA, 2007. https://doi.org/10.2514/6.2007-115410.2514/6.2007-1154 ↗
47. K. Minchenkov, A. Vedernikov, A. Safonov, and I. Akhatov, Thermoplastic Pultrusion: A Review, Polymers, 2021, 13(2), p 180. https://doi.org/10.3390/polym1302018010.3390/polym13020180 ↗
48. C. Ajinjeru, V. Kishore, J. Lindahl, Z. Sudbury, A.A. Hassen, B. Post, L. Love, V. Kunc, and C. Duty, The Influence of Dynamic Rheological Properties on Carbon Fiber-reinforced Polyetherimide for Large-scale Extrusion-based Additive Manufacturing, Int. J. Adv. Manuf. Technol., 2018, 99(1–4), p 411–418. https://doi.org/10.1007/s00170-018-2510-z10.1007/s00170-018-2510-z ↗
49. S.K. Romberg, M.A. Islam, C.J. Hershey, M. DeVinney, C.E. Duty, V. Kunc, and B.G. Compton, Linking Thermoset Ink Rheology to the Stability of 3D-printed Structures, Addit. Manuf., 2021, 37, 101621. https://doi.org/10.1016/j.addma.2020.10162110.1016/j.addma.2020.101621 ↗
50. COMSOL Multiphysics Reference Manual, v. 5.6, COMSOL, Inc., www.comsol.com.
51. O.G. Kravchenko, S.G. Kravchenko, and R.B. Pipes, Chemical and Thermal Shrinkage in Thermosetting Prepreg, Compos. A Appl. Sci. Manuf., 2016, 80, p 72–81. https://doi.org/10.1016/j.compositesa.2015.10.00110.1016/j.compositesa.2015.10.001 ↗
52. H. Yu, S.G. Mhaisalkar, and E.H. Wong, Observations of Gelation and Vitrification of a Thermosetting Resin During the Evolution of Polymerization Shrinkage, Macromol. Rapid Commun., 2005, 26(18), p 1483–1487. https://doi.org/10.1002/marc.20050033310.1002/marc.200500333 ↗
53. K.J. Yoon and J.S. Kim, Effect of Thermal Deformation and Chemical Shrinkage on the Process Induced Distortion of Carbon/epoxy Curved Laminates, J. Compos. Mater., 2001, 35(3), p 253–263. https://doi.org/10.1177/00219980177266224410.1177/002199801772662244 ↗
54. W.F. Hosford and R.M. Caddell, Metal Forming: Mechanics and Metallurgy, Cambridge University Press, Cambridge, 2011.10.1017/CBO9780511976940 ↗
55. NASA, “Observatory Webb’s Mirrors,” https://www.jwst.nasa.gov/content/observatory/ote/mirrors/index.html. Accessed 4 October 2021.
56. Pensa Labs, “D.I. Wire Pro Datasheet,” 2020.