DataVXJournal of Materials Engineering and PerformancePaper
journal article·2025-01Open access

Applications of Laser Surface Treatment in Gears: A Review

Bowen Zhang, Linlin Sun, Ning Zhao, Jinran Li

Journal of Materials Engineering and Performance· Volume 34· Issue 1
Publisher pageOpen full text
Source abstract

Abstract

Laser surface treatment (LST) presents notable advantages such as the flexibility to process complex shapes, high material adhesion, and small heat-affected zone. The ongoing development and widespread adoption of LST have underscored its exceptional utility in gear surface modification. This paper offers a comprehensive review of the applications and simulations of prevalent LST techniques in gear surface modification, encompassing laser quenching, laser surface remelting, laser shock peening, laser surface alloying, laser cladding, laser texturing, and hybrid processes. This review systematically analyzes the published literature regarding LST applied to gears or gear materials. It concisely summarizes essential process parameters and their influence on the post-LST surface performance of gears and investigates how LST-induced alterations in the micro-geometric morphology of gear surfaces affect their overall performance. Beyond presenting the latest advancements in LST application to gears, this review is oriented toward providing guidance for future research in this specialized field.
Source: openalex_inverted_index · Quality: baseline

Research context

Metals & alloys

OpenAlex topics: Additive Manufacturing Materials and Processes · Tribology and Lubrication Engineering · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. R. Ravivarman, K. Palaniradja, and R.P. Sekar, Evolution of Balanced Root Stress and Tribological properties in High Contact Ratio Spur Gear Drive, Mech. Mach. Theory, 2018, 126, p 491–513. https://doi.org/10.1016/j.mechmachtheory.2018.04.02510.1016/j.mechmachtheory.2018.04.025 ↗
2. F.K. Choy, V. Polyshchuk, J.J. Zakrajsek, R.F. Handschuh, and D.P. Townsend, Analysis of the Effects of Surface Pitting and Wear on the Vibration of a Gear Transmission System, Tribol. Trans., 1996, 29, p 77–83. https://doi.org/10.1016/0301-679X(95)00037-510.1016/0301-679X(95)00037-5 ↗
3. H. Kuang and A.D. Lin, The Effect of Tooth Wear on the Vibration Spectrum of a Spur Gear Pair, J. Vib. Acoust., 2001, 123, p 311–317. https://doi.org/10.1115/1.137937110.1115/1.1379371 ↗
4. S. Dhanasekaran and R. Gnanamoorthy, Gear Tooth Wear in Sintered Spur Gears under Dry Running Conditions, Wear, 2008, 265, p 81–87. https://doi.org/10.1016/j.wear.2007.08.02510.1016/j.wear.2007.08.025 ↗
5. J. Moder, F. Grün, and I. Gódor, A Modelling Framework for the Simulation of Lubricated and Dry Line Contacts, Tribol. Int., 2018, 120, p 34–46. https://doi.org/10.1016/j.triboint.2017.12.01110.1016/j.triboint.2017.12.011 ↗
6. T. Sugimoto and D.Y. Ju, Influence of Thermal Boundary Conditions on the Results of Heat Treatment Simulation, Mater. Trans., 2018, 59, p 950–956. https://doi.org/10.2320/matertrans.H-M201881610.2320/matertrans.H-M2018816 ↗
7. Y. Su, K. Oikawa, T. Shinohara, T. Kai, T. Horino, O. Idohara, Y. Misaka, and Y. Tomota, Neutron Bragg-Edge Transmission Imaging for Microstructure and Residual Strain in Induction Hardened Gears, Sci. Rep., 2021, 11, p 4155–4214. https://doi.org/10.1038/s41598-021-83555-910.1038/s41598-021-83555-9 ↗
8. A. Einstein, Zur Quantentheorie der Strahlung, Phys. Zeit., 1917, 18, p 121-128.
9. T.H. Maiman, Stimulated Optical Radiation in Ruby, Nature, 1960, 187, p 493–494. https://doi.org/10.1038/187493a010.1038/187493a0 ↗
10. S. Parker, Introduction, History of Lasers and Laser Light Production, Br. Dent. J., 2007, 202, p 21–31. https://doi.org/10.1038/bdj.2006.11310.1038/bdj.2006.113 ↗
11. M.N. Fesharaki, R. Shoja-Razavi, H.A. Mansouri, and H. Jaamali, Microstructure Investigation of Inconel 625 Coating Obtained by Laser Cladding and TIG Cladding Methods, Surf. Coat. Technol., 2018, 353, p 25–31. https://doi.org/10.1016/j.surfcoat.2018.08.06110.1016/j.surfcoat.2018.08.061 ↗
12. L. Meng, W.F. Zhao, K.L. Hou, D.H. Kou, Z.H. Yuan, X. Zhang, J.L. Xu, Q.W. Hu, D.Z. Wang, and X.Y. Zeng, A Comparison of Microstructure and Mechanical Properties of Laser Cladding and Laser-Induction Hybrid Cladding Coatings on Full-Scale Rail, Mater. Sci. Eng. A, 2019, 748, p 1–15. https://doi.org/10.1016/j.msea.2019.01.06810.1016/j.msea.2019.01.068 ↗
13. J.H. Dai, T.T. Wang, L.J. Chai, X. Hu, L. Zhang, and N. Guo, Characterization and Correlation of Microstructure and Hardness of Ti-6Al-4V Sheet Surface-Treated by Pulsed Laser, J. Alloys Compd., 2020, 826, p 154243. https://doi.org/10.1016/j.jallcom.2020.15424310.1016/j.jallcom.2020.154243 ↗
14. Q. Wang, W.M. Long, J.Q. Miao, and Y.T. Jiu, Research Status of Laser Surface Treatment of Cemented Carbide for Shield Cutter, Mater. Prot., 2021, 54, p 131–137. https://doi.org/10.16577/j.cnki.42-1215/tb.2021.05.025. (in Chinese)10.16577/j.cnki.42-1215/tb.2021.05.025 ↗
15. D.D. Ren, P.J. Zhang, J.H. Yu, Y.W. Yao, and X.Y. Li, Study on the Quenching Depth and Surface Hardness of Metal Materials by Laser Quenching Variable Parameters, Front. Phys., 2023, 10, p 1115447. https://doi.org/10.3389/fphy.2022.111544710.3389/fphy.2022.1115447 ↗
16. A.X. Feng, Y.C. Wei, B.J. Liu, C.L. Chen, X.M. Pan, and J.J. Xue, Microstructure and Mechanical Properties of Composite Strengthened High-Chromium Cast Iron by Laser Quenching and Laser Shock Peening, J. Mater. Res. Technol., 2022, 20, p 4342–4355. https://doi.org/10.1016/j.jmrt.2022.08.14810.1016/j.jmrt.2022.08.148 ↗
17. C. Correa, L.R. de Lara, M. Díaz, A. Gil-Santos, J.A. Porro, and J.L. Ocana, Effect of Advancing Direction on Fatigue Life of 316L Stainless Steel Specimens Treated by Double-Sided Laser Shock Peening, Int. J. Fatigue, 2015, 79, p 1–9. https://doi.org/10.1016/j.surfcoat.2015.11.03210.1016/j.surfcoat.2015.11.032 ↗
18. C. Correa, D. Peral, J.A. Porro, M. Díaz, L. Ruiz de Lara, A. García-Beltrán, and J.L. Ocaña, Random-Type Scanning Patterns in Laser Shock Peening without Absorbing Coating in 2024–T351 Al Alloy: A Solution to Reduce Residual Stress Anisotropy, Opt. Laser Technol., 2015, 73, p 179–187. https://doi.org/10.1155/2014/61846410.1155/2014/618464 ↗
19. R.Y. Qin, X.J. Zhang, S.Q. Guo, B.B. Sun, S.Y. Tang, and W.Q. Li, Laser Cladding of High Co-Ni Secondary Hardening Steel on 18Cr2Ni4WA Steel, Surf. Coat. Technol., 2016, 285, p 242–248. https://doi.org/10.1016/j.matdes.2014.06.02210.1016/j.matdes.2014.06.022 ↗
20. S.W. Han, W.J. Ji, and Y.H. Moon, Fabrication of Gear Having Functionally Graded Properties by Direct Laser Melting Process, Adv. Mech. Eng., 2014 https://doi.org/10.1155/2014/61846410.1155/2014/618464 ↗
21. X.P. Li, C.W. Kang, H. Huang, and T.B. Sercombe, The Role of a Low-Energy-Density Re-Scan in Fabricating Crack-Free Al85Ni5Y6Co2Fe2 Bulk Metallic Glass Composites Via Selective Laser Melting, Mater. Des., 2014, 63, p 407–411. https://doi.org/10.1016/j.optlastec.2015.04.02710.1016/j.optlastec.2015.04.027 ↗
22. A.C. Petare, G. Deshwal, I.A. Palani, and N.K. Jain, Laser Texturing of Helical and Straight Bevel Gears to Enhance Finishing Performance of AFF Process, Int. J. Adv. Manuf. Technol., 2020, 110, p 2221–2238. https://doi.org/10.1007/s00170-020-06007-010.1007/s00170-020-06007-0 ↗
23. A.C. Petare, A. Mishra, I.A. Palani, and N.K. Jain, Study of Laser Texturing Assisted Abrasive Flow Finishing for Enhancing Surface Quality Aand Microgeometry of Spur Gears, Int. J. Adv. Manuf. Technol., 2019, 101, p 785–799. https://doi.org/10.1007/s00170-018-2944-310.1007/s00170-018-2944-3 ↗
24. X.K. Luo, C.L. Zhao, X.H. Zha, X. Wang, Y.G. Song, and Z.H. Tang, Effect of Laser Shock Peeing, Shot Peeing and Their Combination Treatment on Surface Integrity and Axial Fatigue Property of TB6 Titanium Alloy, Sci. Technol. Rev., 2021, 39, p 48–55. https://doi.org/10.3981/j.issn.1000-7857.2021.09.005. (in Chinese)10.3981/j.issn.1000-7857.2021.09.005 ↗
25. X.K. Luo, W.C. Zhang, B. Wu, K. Tian, K. Wang, Y.M. Wang, and X. Wang, Effect of Combination of Laser Shock Peening and Shot Peening on Surface Integrity and Fatigue Property of K4169 Casting Alloy, Aeronaut. Manuf. Technol., 2022, 65, p 57–62. https://doi.org/10.16080/j.issn1671-833x.2022.11.057. (in Chinese)10.16080/j.issn1671-833x.2022.11.057 ↗
26. X.K. Luo, N. Dang, and X. Wang, The Effect of Laser Shock Peening, Shot Peening and Their Combination on the Microstructure and Fatigue Properties of Ti-6Al-4V Titanium Alloy, Int. J. Fatigue, 2021, 153, p 106465. https://doi.org/10.1016/j.ijfatigue.2021.10646510.1016/j.ijfatigue.2021.106465 ↗
27. L.F. Wang, L.C. Zhou, L.L. Liu, W.F. He, X.L. Pan, X.F. Nie, and S.H. Luo, Fatigue Strength Improvement in Ti-6Al-4V Subjected to Foreign Object Damage by Combined Treatment of Laser Shock Peening and Shot Peening, Int. J. Fatigue, 2022, 155, p 106581. https://doi.org/10.1016/j.ijfatigue.2021.10658110.1016/j.ijfatigue.2021.106581 ↗
28. Z.F. Xu, W.T. Ouyang, J.K. Jiao, Y.F. Liu, X.H. Gao, W.S. Luo, W.W. Zhang, and Y.Y. Liu, Investigation on Repairing 30CrMnSiNi2a Steel with Laser Additive and Subtractive Hybrid Remanufacturing Technology, Opt. Lasers Eng., 2023, 160, p 107254. https://doi.org/10.1016/j.optlaseng.2022.10725410.1016/j.optlaseng.2022.107254 ↗
29. C. Guan, T.B. Yu, Z. Yu, L.Y. Chen, and Y. Chen, Repair of Gear by Laser Cladding Ni60 Alloy Powder: Process, Microstructure and Mechanical Performance, Appl. Sci., 2023, 13, p 319. https://doi.org/10.3390/app1301031910.3390/app13010319 ↗
30. Y.L. Ma, X.Z. Ming, S.Q. Jia, K.F. Liu, H.J. Xu, and B.R. Fan, Study on Energy Coupling Model and Tooth Surface Morphology of Face Gear Surface Machined by Femtosecond Laser, Laser Optoelectron. Prog., 2022, 59, p 236–246. https://doi.org/10.3788/LOP202259.0714009. (in Chinese)10.3788/LOP202259.0714009 ↗
31. L.B. Zang, Y. Chen, H. Chen, L. Hai, H.D. Zhou, K. Li, and D.G. Luo, Simulation and Experimental Study on Temperature Field Characteristics of Coated Gears in Automatic Transmission, Automot. Eng., 2018, 40, p 1054–1061. https://doi.org/10.19562/j.chinasae.qcgc.2018.09.008. (in Chinese)10.19562/j.chinasae.qcgc.2018.09.008 ↗
32. H.S. Gupta, M. Hussain, P.K. Singh, V. Kumar, S. Kumar, and A.K. Das, Laser Surface Modification of SAE8620 HVD Material for Transmission Gear, Mater. Today Proc., 2019, 11, p 813–817. https://doi.org/10.1016/j.matpr.2019.03.04710.1016/j.matpr.2019.03.047 ↗
33. Z.H. Zhang, X. Wang, Q.Q. Zhang, Y.H. Liang, L.Q. Ren, and X.J. Li, Fabrication of Fe-Based Composite Coatings Reinforced by TiC Particles and Its Microstructure and Wear Resistance of 40Cr Gear Steel by Low Energy Pulsed Laser Cladding, Opt. Laser Technol., 2019, 119, p 105622. https://doi.org/10.1016/j.optlastec.2019.10562210.1016/j.optlastec.2019.105622 ↗
34. X.Z. Ming, Y.B. Xiao, K.F. Liu, X. Zhou, H.B. Zhang, and R. Ming, Scanning Ablation Characteristic Control for Femtosecond Laser Finishing of Face Gear, China Mech. Eng., 2022, 33, p 1544–1550. https://doi.org/10.3969/j.issn.1004-132X.2022.13.005. (in Chinese)10.3969/j.issn.1004-132X.2022.13.005 ↗
35. G. Muthukumaran and P.D. Babu, Laser Transformation Hardening of Various Steel Grades Using Different Laser Types, J. Braz. Soc. Mech. Sci. Eng., 2021, 43, p 103. https://doi.org/10.1007/s40430-021-02854-410.1007/s40430-021-02854-4 ↗
36. H. Zhang, Y. Shi, C.Y. Xu, and M. Kutsuna, Comparison of Contact Fatigue Strength of Carbon Case Hardening and Laser Hardening of Gears, Surf. Eng., 2004, 20, p 117–120. https://doi.org/10.1179/02670840422501491510.1179/026708404225014915 ↗
37. C. Li, H.X. Gao, X.X. Chen, Z.T. Liu, and X. Han, Study on Multi-field Coupled Evolution Mechanism of Laser Irradiated 40Cr Steel Quenching Process Based on Phase Change Induced Plasticity, Met. Mater. Int., 2022, 28, p 1919–1937. https://doi.org/10.1007/s12540-021-01093-510.1007/s12540-021-01093-5 ↗
38. H.J. Xiao, Y. Peng, C.Y. Ma, and Z.L. Tian, Surface Modification of Laser, Surf. Technol., 2005, 34, p 10–12. https://doi.org/10.16490/j.cnki.issn.1001-3660.2005.05.003. (in Chinese)10.16490/j.cnki.issn.1001-3660.2005.05.003 ↗
39. X.X. Wang, P.Z. Zhao, S. Wei, A. Abulai, C.H. Yi, and Y.F. Jin, Comparison Study of Wear Properties Between Laser Quenching and Flame Quenching of 42CrMo Steel, Appl. Laser, 2022, 42, p 105–112. https://doi.org/10.14128/j.cnki.al.20224204.105. (in Chinese)10.14128/j.cnki.al.20224204.105 ↗
40. E. Mohseni, E. Zalnezhad, and A.R. Bushroa, Comparative Investigation on the Adhesion of Hydroxyapatite Coating on Ti-6Al-4V Implant: A Review Paper, Int. J. Adhes. Adhes., 2014, 48, p 238–257. https://doi.org/10.1016/j.ijadhadh.2013.09.03010.1016/j.ijadhadh.2013.09.030 ↗
41. L.S. Zhong, Y.H. Xu, C.C. Li, F.X. Ye, X.J. Liu, and M. Hojamberdiev, Infiltration Casting and In Situ Fabrication of Tantalum Carbide Particulate-Reinforced Iron Matrix Composites, J. Compos. Mater., 2012, 46, p 895–901. https://doi.org/10.1177/002199831141283210.1177/0021998311412832 ↗
42. F.H. Yang, G.X. Lu, Q.T. Yang, and Y.K. Zhang, Research Progress of Laser Shock Treatment in the Field of Material Forming, J. Aeronaut. Mater., 2018, 38, p 1–10. https://doi.org/10.11868/j.issn.1005-5053.2018.000081. (in Chinese)10.11868/j.issn.1005-5053.2018.000081 ↗
43. X.Z. Ming, M.T. Lai, L. Yuan, K.F. Liu, X. Zhou, and R. Ming, Study of Influence of Process Parameters on Femtosecond Laser Ablation of Face Gear Material, Laser Optoelectron. Prog., 2023, 60, p 321–331.
44. Y.J. Li, S.Y. Dong, S.X. Yan, X.T. Liu, E.Z. Li, P. He, and B.S. Xu, Elimination of Voids by Laser Remelting during Laser Cladding Ni Based Alloy on Gray Cast Iron, Opt. Laser Technol., 2019, 112, p 30–38. https://doi.org/10.1016/j.optlastec.2018.10.05510.1016/j.optlastec.2018.10.055 ↗
45. F.B. Gong, J. Shen, R.H. Gao, T. Zhang, X. Xie, and Y. Li, Influence of Heat Treatment on Microstructure and Mechanical Properties of FeCrNi Coating Produced by Laser Cladding, Trans. Nonferrous Met. Soc., 2016, 26, p 2117–2125. https://doi.org/10.1016/S1003-6326(16)64328-510.1016/S1003-6326(16)64328-5 ↗
46. S. Bagherifard, R. Ghelichi, and M. Guagliano, On the Shot Peening Surface Coverage and Its Assessment by Means of Finite Element Simulation: A Critical Review and Some Original Developments, Appl. Surf. Sci., 2012, 259, p 186–194. https://doi.org/10.1016/j.apsusc.2012.07.01710.1016/j.apsusc.2012.07.017 ↗
47. X.F. Nie, Y.H. Li, W.F. He, S.H. Luo, and L.C. Zhou, Research Progress and Prospect of Laser Shock Peening Technology in Aero-Engine Components, Chin. J. Mech. Eng., 2021, 57, p 293–305. https://doi.org/10.3901/JME.2021.16.293. (in Chinese)10.3901/JME.2021.16.293 ↗
48. A.A. Siddiqui and A.K. Dubey, Recent Trends in Laser Cladding and Surface Alloying, Opt. Laser Technol., 2021, 134, p 106619. https://doi.org/10.1016/j.optlastec.2020.10661910.1016/j.optlastec.2020.106619 ↗
49. Y.N. Liu, Y. Ding, L.J. Yang, R.L. Sun, T.G. Zhang, and X.J. Yang, Research and Progress of Laser Cladding on Engineering Alloys: A Review, J. Manuf. Process., 2021, 66, p 341–363. https://doi.org/10.1016/j.jmapro.2021.03.06110.1016/j.jmapro.2021.03.061 ↗
50. Y.L. Wang, Y.L. Hui, and C.C. Yao, Research Progress of Gear Laser Quenching, Surf. Technol., 2014, 43(5), p 109–117. https://doi.org/10.16490/j.cnki.issn.1001-3660.2014.05.023. (in Chinese)10.16490/j.cnki.issn.1001-3660.2014.05.023 ↗
51. H. Guo, T. Ma, S.Y. Zhang, N. Zhao, and A. Fuentes-Aznar, Computerized Generation and Surface Deviation Correction of Face Gear Drives Generated by Skiving, Mech. Mach. Theory, 2022, 173, p 104839. https://doi.org/10.1016/j.mechmachtheory.2022.10483910.1016/j.mechmachtheory.2022.104839 ↗
52. Y.J. Peng, N. Zhao, M.Q. Zhang, W. Li, and R.C. Zhou, Non-Newtonian Thermal Elastohydrodynamic Simulation of Helical Gears Considering Modification and Misalignment, Tribol. Int., 2018, 124, p 46–60. https://doi.org/10.1016/j.triboint.2018.03.02510.1016/j.triboint.2018.03.025 ↗
53. L.L. Sun, Q.J. Wang, M.Q. Zhang, N. Zhao, L.M. Keer, S.B. Liu, and W.W. Chen, Discrete Convolution and FFT Method with Summation of Influence Coefficients (DCS–FFT) for Three-Dimensional Contact of Inhomogeneous Materials, Comput. Mech., 2020, 65, p 1509–1529. https://doi.org/10.1007/s00466-020-01832-210.1007/s00466-020-01832-2 ↗
54. J.R. Li, L.L. Sun, N. Zhao, P. Li, H.Q. Wang, and Y.L. Yan, A Semi-analytical solution for Inhomogeneous Material in the Quarter Space, Int. J. Mech. Sci., 2024, 263, p 108766. https://doi.org/10.1016/j.ijmecsci.2023.10876610.1016/j.ijmecsci.2023.108766 ↗
55. N. Zhao, L. Tao, H. Guo, and M.Q. Zhang, Laser Clad NiCrBSi Alloy Wear-resistance Coating with RE Addition on Heavy Duty Spur Gear Flank, IOP Conference Series: Materials Science and Engineering, 2017, 248, p 012016. https://doi.org/10.1088/1757-899X/248/1/01201610.1088/1757-899X/248/1/012016 ↗
56. N. Zhao, L. Tao, H. Guo, and M.Q. Zhang, Microstructure and Wear Resistance of Laser Cladded Ni-Based Coatings with Nanometer La2O3 Addition, Rare Met. Mater. Eng., 2017, 46, p 2092–2096.10.1016/S1875-5372(17)30185-6 ↗
57. N. Zhao, L. Tao, H. Guo, and M.Q. Zhang, Effect of Ultra-fine WC Particles on Microstructural Evolution and Wear Behavior of Ni-Based Nano-CeO2 Coatings Produced by Laser, Rare Met. Mater. Eng., 2018, 47, p 20–25.10.1016/S1875-5372(18)30065-1 ↗
58. N. Zhao, L. Tao, H. Guo, and M.Q. Zhang, Research of the Laser Cladding and Wear—Resistance of Worn Surface of Heavy Load Gear of Mining Machine, J Mech. Trans., 2018, 42, p 94–96. https://doi.org/10.16578/j.issn.1004.2539.2018.06.02010.16578/j.issn.1004.2539.2018.06.020 ↗
59. W. Zhang, S.L. Yang, Z. Lin, and W. Tao, Weld Morphology and Mechanical Properties in Laser Spot Welding of Quenching and Partitioning 980 Steel, J. Manuf. Process., 2020, 56, p 1136–1145. https://doi.org/10.1016/j.jmapro.2020.05.05710.1016/j.jmapro.2020.05.057 ↗
60. B.X. Wang, Y.M. Pan, Y. Liu, N. Lyu, G.C. Barber, R. Wang, W.W. Cui, F. Qiu, and M. Hu, Effects of Quench-Tempering and Laser Hardening Treatment on Wear Resistance of Gray Cast Iron, J. Mater. Res. Tech., 2020, 9, p 8163–8171. https://doi.org/10.1016/j.jmrt.2020.05.00610.1016/j.jmrt.2020.05.006 ↗
61. F. Lusquinos, J.C. Conde, S. Bonss, A. Riveiro, F. Quintero, R. Cornesana, and J. Pou, Theoretical and Experimental Analysis of High Power Diode Laser (HPDL) Hardening of AISI 1045 Steel, Appl. Surf. Sci., 2007, 254, p 948–954. https://doi.org/10.1016/j.apsusc.2007.07.20010.1016/j.apsusc.2007.07.200 ↗
62. L.J. Chai, H. Wu, Z.Y. Zheng, H.T. Guan, H.C. Pan, N. Guo, and B. Song, Microstructural Characterization and Hardness Variation of Pure Ti Surface-Treated by Pulsed Laser, J. Alloys Compd., 2018, 741, p 116–122. https://doi.org/10.1016/j.jallcom.2018.01.11310.1016/j.jallcom.2018.01.113 ↗
63. L.J. Chai, H. Wu, S.Y. Wang, K. Chen, T.T. Wang, and J.Y. Xia, Characterization of Microstructure and Hardness of a Zr-2.5Nb Alloy Surface-Treated by Pulsed Laser, Mater. Chem. Phys., 2017, 198, p 303–309. https://doi.org/10.1016/j.matchemphys.2017.06.03210.1016/j.matchemphys.2017.06.032 ↗
64. M. Liu, R.H. Song, and D.J. Kong, Measurement of Residual Stress in Camshaft Phase Transformation Layer by CO, Laser Quenching with X-ray Diffraction Stress Tester, Mater. Mech. Eng., 2007, 31, p 28–31. (in Chinese)
65. Z.Y. Chen, G.J. Zhou, and Z.H. Chen, Microstructure and Hardness Investigation of 17-4PH Stainless Steel by Laser Quenching, Mater. Sci. Eng. A, 2012, 534, p 536–541. https://doi.org/10.1016/j.msea.2011.12.00410.1016/j.msea.2011.12.004 ↗
66. A. Aprilia, N. Maharjan, and W. Zhou, Decarburization in Laser Surface Hardening of AISI 420 Martensitic Stainless Steel, Materials, 2023, 16, p 939. https://doi.org/10.3390/ma1603093910.3390/ma16030939 ↗
67. R. Komanduri and Z.B. Hou, Thermal Analysis of the Laser Surface Transformation Hardening Process, Int. J. Heat Mass Transfer, 2001, 44, p 2845–2862. https://doi.org/10.1016/S0017-9310(00)00316-110.1016/S0017-9310(00)00316-1 ↗
68. Y.L. Wang, S.R. Xu, and Y.L. Hui, Research on Laser Quenching Process of 20CrMnMo Gears by Finite Element Method and Experiment, The Int. J. Adv. Manuf. Technol., 2016, 87, p 1013–1021. https://doi.org/10.1007/s00170-016-8534-310.1007/s00170-016-8534-3 ↗
69. R. Komanduri and Z.B. Hou, Thermal Analysis of Laser Surface Transformation Hardening—Optimization of Process Parameters, Int. J. Mach. Tools Manuf, 2004, 44, p 991–1008. https://doi.org/10.1016/j.ijmachtools.2004.01.01110.1016/j.ijmachtools.2004.01.011 ↗
70. C.M. Du, Y. Li, Y. Sun, X.F. Fan, J.Y. Zhu, and S. Li, Experimental Study on Laser Quenching Hardening of 42CrMo Steel Surface, Mater. Prot., 2022, 55, p 160–164. https://doi.org/10.16577/j.issn.1001-1560.2022.0198. (in Chinese)10.16577/j.issn.1001-1560.2022.0198 ↗
71. A.K. Borki, A.E.I. Ouafi, and A. Chebak, Experimental Investigation of Laser Surface Transformation Hardening of 4340 Steel Spur Gears, J. Manuf. Mater. Process., 2019, 3, p 72. https://doi.org/10.3390/jmmp303007210.3390/jmmp3030072 ↗
72. P.P. Sun, S.X. Li, G. Yu, X.L. He, C.Y. Zheng, and W.J. Ning, Laser Surface Hardening of 42CrMo Cast Steel for Obtaining a Wide and Uniform Hardened Layer by Shaped Beams, Int. J. Adv. Manuf. Technol., 2014, 70, p 787–796. https://doi.org/10.1007/s00170-013-5292-310.1007/s00170-013-5292-3 ↗
73. F.L. Zhang, Research on Laser Heat Treatment Technology of Mine Mechanical Gear, Hot Work. Technol., 2016, 45, p 210–212. https://doi.org/10.14158/j.cnki.1001-3814.2016.18.056. (in Chinese)10.14158/j.cnki.1001-3814.2016.18.056 ↗
74. M.Z. Ibrahim, A.A.D. Sarhan, T.Y. Kuo, F. Yusof, and M. Hamdi, Characterization and Hardness Enhancement of Amorphous Fe-Based Metallic Glass Laser Cladded on Nickel-Free Stainless Steel for Biomedical Implant Application, Mater. Chem. Phys., 2019, 235, p 121745. https://doi.org/10.1016/j.matchemphys.2019.12174510.1016/j.matchemphys.2019.121745 ↗
75. E. Kennedy, G. Byrne, and D.N. Collins, A Review of the Use of High Power Diode Lasers in Surface Hardening, J. Mater. Process. Tech., 2004, 155–156, p 1855–1860. https://doi.org/10.1016/j.jmatprotec.2004.04.27610.1016/j.jmatprotec.2004.04.276 ↗
76. H.Z. Wang, Y.W. Zhai, L.Y. Zhou, and Z.B. Zhang, Study on Laser Surface Hardening Behavior of 42CrMo Press Brake Die, Mater. Lett. Coat., 2021, 11, p 997. https://doi.org/10.3390/coatings1108099710.3390/coatings11080997 ↗
77. Y.H. Zhang and Y.X. Wang, Numerical Simulation and Surface Properties of 42CrMo Steel Treated by Plasma Nitriding and Laser Quenching, Metals, 2023, 13(8), p 1473. https://doi.org/10.3390/met1308147310.3390/met13081473 ↗
78. J.X. Sang, Failure Analysis of a Transmission Gear and the Studies on Laser Modification of Gear Steel Surface, Chongqin University, Chongqing, 2017.
79. F. Malek Ghaini, M.H. Ameri, and M.J. Torkamany, Surface Transformation Hardening of Ductile Cast Iron by a 600W Fiber Laser, Optik, 2020, 203, p 163758. https://doi.org/10.1016/j.ijleo.2019.16375810.1016/j.ijleo.2019.163758 ↗
80. Y. Küçük, E. Altaş, and M.E. Topcu, A Comparative Analysis of the Effect of Laser Surface Treatment on the Dry Sliding Wear Behavior of Ductile Cast Irons with Different Microstructures, Optik, 2023, 274, p 170540. https://doi.org/10.1016/j.ijleo.2023.17054010.1016/j.ijleo.2023.170540 ↗
81. C. Li, S.J. Deng, H. Sun, and X. Han, Optimization of Laser Irradiation Process Parameters for 40Cr Steel Based on Back Propagation Neural Network and Genetic Algorithm, Proc. Inst. Mech. Eng. L J. Mat., 2023 https://doi.org/10.1177/1464420723118847510.1177/14644207231188475 ↗
82. B. He, S. Huang, and X.L. He, Numerical Simulation of Gear Surface Hardening Using the Finite Element Method, The Int. J. Adv. Manuf. Technol., 2014, 74, p 665–672. https://doi.org/10.1007/s00170-014-6017-y10.1007/s00170-014-6017-y ↗
83. T.H. Zhang, T.Y. Xiao, and B.R. Yang, The Process Simulation of Virtual Laser Surface Hardening, The Int. J. Adv. Manuf. Technol., 2008, 37, p 690–697. https://doi.org/10.1007/s00170-007-1008-x10.1007/s00170-007-1008-x ↗
84. M.A. Pinto, N. Cheung, M.C.F. Lerardi, and A. Garcia, Microstructural and Hardness Investigation of an Aluminum-Copper Alloy Processed by Laser Surface Melting, Mater Charact, 2003, 50, p 249–253. https://doi.org/10.1016/S1044-5803(03)00091-310.1016/S1044-5803(03)00091-3 ↗
85. L. Peng, K. Linghua, H. Xu, L. Guofu, and Y. Jinwei, Corrosion Resistance of Stainless Steel Surface Based on Laser Remelting, Spec. Cast. Nonferrous Alloys, 2021, 41, p 995–1000. https://doi.org/10.15980/j.tzzz.2021.08.014. (in Chinese)10.15980/j.tzzz.2021.08.014 ↗
86. Y.L. Chen, X. Li, J.Y. Liu, Y.C. Zhang, and X.H. Chen, Effect of Scanning Speed on Properties of Laser Surface Remelted 304 Stainless Steel, Micromachines, 2022, 13, p 1426. https://doi.org/10.3390/mi1309142610.3390/mi13091426 ↗
87. G. Abbas, Z. Liu, and P. Skeldon, Corrosion Behavior of Laser-melted Magnesium Alloy, Appl. Surf. Sci., 2005, 47, p 347–353. https://doi.org/10.1016/j.apsusc.2005.01.16910.1016/j.apsusc.2005.01.169 ↗
88. Y. Yao, X. Li, Y.Y. Wang, W. Zhao, G. Li, and R.P. Liu, Microstructural Evolution and Mechanical Properties of Ti-Zr Beta Titanium Alloy After Laser Surface Remelting, J. Alloys Compd., 2014, 583, p 43–47. https://doi.org/10.1016/j.jallcom.2013.08.16010.1016/j.jallcom.2013.08.160 ↗
89. J.W. Wang, H.M. Wang, X. Cheng, B. Zhang, Y. Wu, S.Q. Zhang, and X.J. Tian, Prediction of Solidification Microstructure of Titanium Aluminum Intermetallic Alloy by Laser Surface Remelting, Opt. Laser Technol., 2022, 147, p 107606. https://doi.org/10.1016/j.optlastec.2021.10760610.1016/j.optlastec.2021.107606 ↗
90. J.S. Luo, W.T. Sun, R.X. Duan, W.Q. Yang, K.C. Chan, F.Z. Ren, and X.S. Yang, Laser Surface Treatment-Introduced Gradient Nanostructured TiZrHfTaNb Refractory High-Entropy Alloy with Significantly Enhanced Wear Resistance, J. Mater. Sci. Technol., 2021, 110, p 43–56. https://doi.org/10.1016/j.jmst.2021.09.02910.1016/j.jmst.2021.09.029 ↗
91. N. Jeyaprakash, C.H. Yang, M. Duraiselvam, G. Prabu, S.P. Tseng, and D.R. Kumar, Investigation of High Temperature Wear Performance on Laser Processed Nodular Iron Using Optimization Technique, Results Phys., 2019, 15, p 102585. https://doi.org/10.1016/j.rinp.2019.10258510.1016/j.rinp.2019.102585 ↗
92. J.Y. Li, Y.D. Liu, Y.S. Zhou, W.T. Shi, and M. Zhang, Effect of Laser Remelting on Quality and Mechanical Properties of Selective Laser Melting of TC4, Laser Optoelectron. Prog., 2022, 59, p 239–247. https://doi.org/10.3788/LOP202259.051400610.3788/LOP202259.0514006 ↗
93. H.Z. Wang, Y.H. Cheng, J.Y. Yang, and Q.Q. Wang, Influence of Laser Remelting on Organization, Mechanical Properties and Corrosion Resistance of Fe-Based Amorphous Composite Coating, Surf. Coat. Technol., 2021, 414, p 127081. https://doi.org/10.1016/j.surfcoat.2021.12708110.1016/j.surfcoat.2021.127081 ↗
94. N. Pagano, V. Angelini, L. Ceschini, and G. Campana, Laser Remelting for Enhancing Tribological Performances of a Ductile Iron, Procedia CIRP, 2016, 41, p 987–991. https://doi.org/10.1016/j.procir.2015.12.13110.1016/j.procir.2015.12.131 ↗
95. Y. Lv, L.Q. Lei, and L.N. Sun, Effect of Shot Peening on the Fatigue Resistance of Laser Surface Melted 20CrMnTi Steel Gear, Mater. Sci. Eng. A, 2015, 629, p 8–15. https://doi.org/10.1016/j.msea.2015.01.07410.1016/j.msea.2015.01.074 ↗
96. Y. Lv, Influence of Laser Surface Melting on the Micropitting Performance of 35CrMo Structural Steel Gears, Mater. Sci. Eng. A, 2013, 564, p 1–7. https://doi.org/10.1016/j.msea.2012.11.05910.1016/j.msea.2012.11.059 ↗
97. X.H. Zhao, H.C. Zhang, and Y. Liu, Effect of Laser Surface Remelting on the Fatigue Crack Propagation Rate of 40Cr Steel, Results Phys., 2019, 12, p 424–431. https://doi.org/10.1016/j.rinp.2018.11.09710.1016/j.rinp.2018.11.097 ↗
98. Y. Lv, L.Q. Lei, and L.N. Sun, Influence of Different Combined Severe Shot Peening and Laser Surface Melting Treatments on the Fatigue Performance of 20CrMnTi Steel Gear, Mater. Sci. Eng. A, 2016, 658, p 77–85. https://doi.org/10.1016/j.msea.2016.01.05010.1016/j.msea.2016.01.050 ↗
99. Y. Lv, L.Q. Lei, and L.N. Sun, Effect of Microshot Peened Treatment on the Fatigue Behavior of Laser-Melted W6Mo5Cr4V2 Steel Gear, Int. J. Fatigue, 2017, 98, p 121–130. https://doi.org/10.1016/j.ijfatigue.2017.01.01710.1016/j.ijfatigue.2017.01.017 ↗
100. M.Z. Ge and J.Y. Xiang, Effect of Laser Shock Peening on Microstructure and Fatigue Crack Growth Rate of AZ31B Magnesium Alloy, J. Alloy Comp., 2016, 680, p 544–552. https://doi.org/10.1016/j.jallcom.2016.04.17910.1016/j.jallcom.2016.04.179 ↗