Additive Manufacturing in the Context of Repeatability and Reliability
Source abstract
Abstract
Additive manufacturing has long enabled complex and less restrictive design capabilities in the world of modern manufacturing. However, industry applications require extensive analysis into reliability concerns over repeatability that currently prevent the technology from maturing to an adequate, widespread production method. With current research focus expanding on additive manufacturing technologies, a need has developed to ensure repeatability in already established methods. This paper reviews the current certification landscape surrounding additive components as well as similarly variable manufacturing processes as baselines for comparison. Next, concerns in the repeatability of additive manufacturing methods are outlined for both their occurrences and effects. Lastly, methods of verification and current developments in design and verification methodologies are presented with the aim of analyzing potential future developments to aid industry adoption of additive manufacturing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. T. Wohlers, T. Gornet, History of Additive Manufacturing. Wohlers report, vol 24 (2014), p. 118
2. K.V. Wong, A. Hernandez, A Review of Additive Manufacturing. Int. Sch. Res. Not. 2012, 1–10 (2012)10.1093/imrn/rnr003 ↗
3. A. Gisario, M. Kazarian, F. Martina, M. Mehrpouya, Metal Additive Manufacturing in the Commercial Aviation Industry: A Review. J. Manuf. Syst. 53, 124–149 (2019)10.1016/j.jmsy.2019.08.005 ↗
4. K. Oettmeier, E. Hofmann, Impact of Additive Manufacturing Technology Adoption on Supply Chain Management Processes and Components. J. Manuf. Technol. Manag. (2016)10.1108/JMTM-12-2015-0113 ↗
5. M.K. Niaki, F. Nonino, G. Palombi, S.A. Torabi, Economic Sustainability of Additive Manufacturing: Contextual Factors Driving its Performance in Rapid Prototyping. J. Manuf. Technol. Manag. 30(2), 353–365 (2018)10.1108/JMTM-05-2018-0131 ↗
6. Y. Li, G. Jia, Y. Cheng, Y. Hu, Additive Manufacturing Technology in Spare Parts Supply Chain: A Comparative Study. Int. J. Prod. Res. 55(5), 1498–1515 (2017)10.1080/00207543.2016.1231433 ↗
7. C.C. Seepersad, J. Allison, C. Sharpe, et al.: The need for effective design guides in additive manufacturing. DS 87-5 Proceedings of the 21st International Conference on Engineering Design (ICED 17), vol. 5 (Vancouver, Canada, 2017), pp. 309–316
8. A. Coro, L.M. Macareno, J. Aguirrebeitia, L.N. López de Lacalle, A Methodology to Evaluate the Reliability Impact of the Replacement of Welded Components by Additive Manufacturing Spare Parts. Metals 9(9), 932 (2019)10.3390/met9090932 ↗
9. S. Singamneni, L. Yifan, A. Hewitt, R. Chalk, W. Thomas, D. Jordison, Additive Manufacturing for the Aircraft Industry: A Review. J. Aeronaut. Aerosp. Eng 8(1), 351–371 (2019)10.35248/2168-9792.19.8.215 ↗
10. L. Leemis, Probability Models and Statistical Methods in Reliability (2000)
11. J. Gruenwald, Risk-Based Structural Design: Designing for Future Aircraft (Citeseer, 2008)
12. W. Feller, An Introduction to Probability Theory and its Applications (Wiley, New York, 1968)
13. E. Tuegel, R. Penmetsa, Risk-Based Design and Certification of Aircraft: A Systems Engineering Approach. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 14th AIAA/ASME/AHS Adaptive Structures Conference 7th, (2006) p. 214710.2514/6.2006-2147 ↗
14. G.-J. Park, T.-H. Lee, K.H. Lee, K.-H. Hwang, Robust Design: An Overview. AIAA J. 44(1), 181–191 (2006)10.2514/1.13639 ↗
15. Y. Liu, S. Mahadevan, Probabilistic Fatigue Life Prediction using an Equivalent Initial Flaw Size Distribution. Int. J. Fatigue 31(3), 476–487 (2009)10.1016/j.ijfatigue.2008.06.005 ↗
16. P.V. Varde, M.G. Pecht, et al. Risk-Based Engineering (Springer, Berlin Heidelberg, 2018)10.1007/978-981-13-0090-5 ↗
17. S.S. Rao, Reliability-Based Design (McGraw-Hill, 1992)
18. D.D. Gu, W. Meiners, K. Wissenbach, R. Poprawe, Laser Additive Manufacturing of Metallic Components: Materials, Processes and Mechanisms. Int. Mater. Rev. 57(3), 133–164 (2012)10.1179/1743280411Y.0000000014 ↗
19. J.J. Lewandowski, M. Seifi, Metal Additive Manufacturing: A Review of Mechanical Properties (2016)10.1146/annurev-matsci-070115-032024 ↗
20. P. O’Regan, P. Prickett, R. Setchi, G. Hankins, N. Jones, Metal Based Additive Layer Manufacturing: Variations, Correlations and Process Control. Procedia Comput. Sci. 96, 216–224 (2016)10.1016/j.procs.2016.08.134 ↗
21. T. Moges, G. Ameta, P. Witherell, A review of model inaccuracy and parameter uncertainty in laser powder bed fusion models and simulations. J. Manuf. Sci. Eng. 141(4), 040801 (2019)10.1115/1.4042789 ↗
22. P. Charalampous, I. Kostavelis, D. Tzovaras, Non-destructive Quality Control Methods in Additive Manufacturing: A Survey. Rapid Prototyp. J. (2020)10.1108/RPJ-08-2019-0224 ↗
23. L. Rebaioli, I. Fassi, A Review on Benchmark Artifacts for Evaluating the Geometrical Performance of Additive Manufacturing Processes. Int. J. Adv. Manuf. Technol. 93(5), 2571–2598 (2017)10.1007/s00170-017-0570-0 ↗
24. C.-J. Bae, A.B. Diggs, A. Ramachandran, Quantification and Certification of Additive Manufacturing Materials and Processes. Additive Manufacturing (Elsevier, 2018), pp. 181–21310.1016/B978-0-12-812155-9.00006-2 ↗
25. L. Dowling, J. Kennedy, S. O’Shaughnessy, D. Trimble, A Review of Critical Repeatability and Reproducibility Issues in Powder Bed Fusion. Mater. Des. 186, 108346 (2020)10.1016/j.matdes.2019.108346 ↗
26. A. du Plessis, I. Yadroitsava, I. Yadroitsev, Effects of Defects on Mechanical Properties in Metal Additive Manufacturing: A Review Focusing on X-ray Tomography Insights. Mater. Des. 187, 108385 (2020)10.1016/j.matdes.2019.108385 ↗
27. S. Mohd Yusuf, S. Cutler, N. Gao, The Impact of Metal Additive Manufacturing on the Aerospace Industry. Metals 9(12), 1286 (2019)10.3390/met9121286 ↗
28. Z. Hu, S. Mahadevan, Uncertainty Quantification and Management in Additive Manufacturing: Current Status, Needs, and Opportunities. Int. J. Adv. Manuf. Technol. 93(12), 5 (2017)
29. E.O. Olakanmi, R. Cochrane, K. Dalgarno, A Review on Selective Laser Sintering/Melting (sls/slm) of Aluminium Alloy Powders: Processing, Microstructure, and Properties. Prog. Mater. Sci. 74, 401–477 (2015)10.1016/j.pmatsci.2015.03.002 ↗
30. K. Zeng, D. Pal, B. Stucker, A Review of Thermal Analysis Methods in Laser Sintering and Selective Laser Melting. 2012 International Solid Freeform Fabrication Symposium. University of Texas at Austin (2012)
31. S.K. Everton, M. Hirsch, P. Stravroulakis, R.K. Leach, A.T. Clare, Review of In-Situ Process Monitoring and In-Situ Metrology for Metal Additive Manufacturing. Mater. Des. 95, 431–445 (2016)10.1016/j.matdes.2016.01.099 ↗
32. A. Townsend, N. Senin, L. Blunt, R. Leach, J. Taylor, Surface Texture Metrology for Metal Additive Manufacturing: A Review. Precis. Eng. 46, 34–47 (2016)10.1016/j.precisioneng.2016.06.001 ↗
33. M. Seifi, A. Salem, J. Beuth, O. Harrysson, J.J. Lewandowski, Overview of Materials Qualification Needs for Metal Additive Manufacturing. Jom 68(3), 747–764 (2016)10.1007/s11837-015-1810-0 ↗
34. J. Rome, B. Soltz, V.K. Goyal, Key elements of the qualification, workmanship, and design verification of additively manufactured parts. AIAA Scitech 2020 Forum (2020)10.2514/6.2020-1474 ↗
35. B.K. Foster, E.W. Reutzel, A.R. Nassar, C.J. Dickman, B.T. Hall, A Brief Survey of Sensing for Metal-Based Powder Bed Fusion Additive Manufacturing. Dimens. Opt. Metrol. Inspect. Pract. Appl. Iv 9489, 40–48 (2015)
36. M. Kamal, G. Rizza, Design for Metal Additive Manufacturing for Aerospace Applications. Additive Manufacturing for the Aerospace Industry, (Elsevier, 2019), pp. 67–8610.1016/B978-0-12-814062-8.00005-4 ↗
37. H.D. Vora, S. Sanyal, A Comprehensive Review: Metrology in Additive Manufacturing and 3D Printing Technology. Prog. Addit. Manuf. 5(4), 319–353 (2020)10.1007/s40964-020-00142-6 ↗
38. Z. Zhu, S. Keimasi, N. Anwer, L. Mathieu, L. Qiao, Review of Shape Deviation Modeling for Additive Manufacturing. Advances on Mechanics, Design Engineering and Manufacturing (Springer, 2017), pp. 241–25010.1007/978-3-319-45781-9_25 ↗
39. A. Wiberg, J. Persson, J. Ölvander, Design for Additive Manufacturing–A Review of Available Design Methods and Software. Rapid Prototyp. J. (2019)10.1108/RPJ-10-2018-0262 ↗
40. C. Dordlofva, P. Törlind, Qualification Challenges with Additive Manufacturing in Space Applications. 2017 International Solid Freeform Fabrication Symposium (2017). University of Texas at Austin
41. F.A. Authority, The FAA and Industry Guide to Product Certification. Washington (2004)
42. M. Mohaghegh, Validation and Certification of Aircraft Structures. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, (2005) p. 216210.2514/6.2005-2162 ↗
43. S. Waite, Certification and Airworthiness of Polymer Composite Aircraft. Polymer Composites in the Aerospace Industry (Elsevier, 2020), pp. 593–64510.1016/B978-0-08-102679-3.00019-8 ↗
44. J.G. Sun, M.J. Verrilli, R. Stephan, T.R. Barnett, G. Ojard, Nondestructive Evaluation of Ceramic Matrix Composite Combustor Components. AIP Conference Proceedings (American Institute of Physics, 2003), pp. 1011–101810.1063/1.1570244 ↗
45. D.A. Miller, D.D. Samborsky, B.L. Ennis, Mechanical Testing Summary: Optimized Carbon Fiber Composites in Wind Turbine Blade Design. Technical report (Sandia National Lab. (SNL-NM), Albuquerque, NM, United States, 2019)10.2172/1562792 ↗
46. C. Dordlofva, P. Törlind, Evaluating Design Uncertainties in Additive Manufacturing using Design Artefacts: Examples from Space Industry. Des. Sci. 6, e12 (2020)10.1017/dsj.2020.11 ↗
47. P. Feraboli, Composite Materials Strength Determination within the Current Certification Methodology for Aircraft Structures. J. Aircr. 46(4), 1365–1374 (2009)10.2514/1.41286 ↗
48. M. Gorelik, Additive Manufacturing in the Context of Structural Integrity. Int. J. Fatigue 94, 168–177 (2017)10.1016/j.ijfatigue.2016.07.005 ↗
49. R.L. Dreshfield, H. Gray, P/m Superalloys: A Troubled Adolescent? Technical Report (1984)
50. D. Veley, C. Clay, A Perspective on Design and Certification. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, (2005), p. 216310.2514/6.2005-2163 ↗
51. K.C. Kapur, L.R. Lamberson, Reliability in Engineering Design. New York (1977)
52. J.S. Oakland, Statistical Process Control (Routledge, 2007)10.4324/9780080551739 ↗
53. G. Bogucki, W. McCarvill, S. Ward, J. Tomblin, Guidelines for the Development of Process Specifications, Instructions, and Controls for the Fabrication of Fiber-Reinforced Polymer Composites. Technical Report, Wichita State Univ KS Inst for Aviation Research (2003)
54. P.W. Manders, T.-W. Chou, Variability of Carbon and Glass Fibers, and the Strength of Aligned Composites. J. Reinf. Plast. Compos. 2(1), 43–59 (1983)10.1177/073168448300200105 ↗
55. W. McCarvill, S. Ward, G. Bogucki, J. Tomblin, Guidelines and Recommended Criteria for the Development of a Material Specification for Carbon Fiber/Epoxy Unidirectional Prepregs. Technical report, Wichita State Univ KS Inst for Aviation Research (2003)
56. S.T. Gonczy, Federal aviation administration (faa) airworthiness certification for ceramic matrix composite components in civil aircraft systems. MATEC Web of Conferences, vol 29, (EDP Sciences, 2015), p. 0000210.1051/matecconf/20152900002 ↗
57. H. Li, R. Foschi, R. Vaziri, G. Fernlund, A. Poursartip, Probability-Based Modelling of Composites Manufacturing and its Application to Optimal Process Design. J. Compos. Mater. 36(16), 1967–1991 (2002)10.1177/0021998302036016241 ↗
58. J. Li, C. Zhang, Z. Liang, B. Wang, Stochastic Simulation Based Approach for Statistical Analysis and Characterization of Composites Manufacturing Processes. J. Manuf. Syst. 25(2), 108–121 (2006)10.1016/S0278-6125(06)80037-3 ↗
59. J. Gan, S. Bickerton, M. Battley, Quantifying Variability within Glass Fibre Reinforcements using an Automated Optical Method. Compos. Part A Appl. Sci. Manuf. 43(8), 1169–1176 (2012)10.1016/j.compositesa.2012.03.024 ↗
60. M. Di Prima, J. Coburn, D. Hwang, J. Kelly, A. Khairuzzaman, L. Ricles, Additively Manufactured Medical Products the FDA Perspective. 3D Print. Med. 2(1), 1–6 (2016)10.1186/s41205-016-0005-9 ↗
61. R. Konečná, G. Nicoletto, V. Majerová, Largest Extreme Value Determination of Defect Size with Application to Cast Al-Si Alloys Porosity. Metal 16, 94 (2007)
62. R. Hardin, C. Beckermann, Effect of Porosity on Deformation, Damage, and Fracture of Cast Steel. Metall. Mater. Trans. A 44(12), 5316–5332 (2013)10.1007/s11661-013-1669-z ↗
63. K.Y. Lin, A.V. Styuart, Probabilistic Approach to Damage Tolerance Design of Aircraft Composite Structures. J. Aircr. 44(4), 1309–1317 (2007)10.2514/1.26913 ↗
64. H.-P. Kan, Assessment of probabilistic certification methodology for composite structures (NORTHROP GRUMMAN CORP EL SEGUNDO CA MILITARY AIRCRAFT SYSTEMS DIV, 2001)
65. M. IJpma, Material Design Allowables and Qualification. Fibre Metal Laminates(Springer, 2001), pp. 69–7810.1007/978-94-010-0995-9_5 ↗
66. C.L. Harmsworth, Development of Design Allowables for Metal Matrix Materials (ASTM International, 1988)10.1520/STP25953S ↗
67. B. Jones, Determination of Design Allowables for Composite Materials. Composite Materials: Testing and Design (ASTM International, 1969)10.1520/STP49824S ↗
68. J. Delgado, J. Ciurana, C.A. Rodríguez, Influence of Process Parameters on Part Quality and Mechanical Properties for DMLS and SLM with Iron-Based Materials. Int. J. Adv. Manuf. Technol. 60(5), 601–610 (2012)10.1007/s00170-011-3643-5 ↗
69. H. Gong, K. Rafi, H. Gu, T. Starr, B. Stucker, Analysis of Defect Generation in Ti-6Al-4V Parts Made using Powder Bed Fusion Additive Manufacturing Processes. Addit. Manuf. 1, 87–98 (2014)
70. A. Du Plessis, P. Sperling, A. Beerlink, L. Tshabalala, S. Hoosain, N. Mathe, S.G. Le Roux, Standard Method for Microct-Based Additive Manufacturing Quality Control 1: Porosity Analysis. MethodsX 5, 1102–1110 (2018)10.1016/j.mex.2018.09.005 ↗
71. M. Tang, Inclusions, Porosity, and Fatigue of AlSi10Mg Parts Produced by Selective Laser Melting, PhD thesis, Carnegie Mellon University, 201710.1016/j.ijfatigue.2016.06.002 ↗
72. J. Gockel, J. Beuth, K. Taminger, Integrated Control of Solidification Microstructure and Melt Pool Dimensions in Electron Beam Wire Feed Additive Manufacturing of Ti-6Al-4V. Addit. Manuf. 1, 119–126 (2014)
73. J.P. Oliveira, A. LaLonde, J. Ma, Processing parameters in laser powder bed fusion metal additive manufacturing. Mater. Des. 193, 108762 (2020)10.1016/j.matdes.2020.108762 ↗
74. J. Beuth, J. Fox, J. Gockel, C. Montgomery, R. Yang, H. Qiao, E. Soylemez, P. Reeseewatt, A. Anvari, S. Narra, et al., Process Mapping for Qualification Across Multiple Direct Metal Additive Manufacturing Processes. 2013 International Solid Freeform Fabrication Symposium (University of Texas at Austin, 2013)
75. J. Gockel, J. Beuth, Understanding Ti-6Al-4V Microstructure Control in Additive Manufacturing via Process Maps. 2013 International Solid Freeform Fabrication Symposium (University of Texas at Austin, 2013)
76. D.F. Louw, P. Pistorius, The Effect of Scan Speed and Hatch Distance on Prior-Beta Grain Size in Laser Powder Bed Fused Ti-6Al-4V. Int. J. Adv. Manuf. Technol. 103(5), 2277–2286 (2019)10.1007/s00170-019-03719-w ↗
77. B. Farhang, B.B. Ravichander, F. Venturi, A. Amerinatanzi, N.S. Moghaddam, Study on Variations of Microstructure and Metallurgical Properties in Various Heat-Affected Zones of SLM Fabricated Nickel-Titanium Alloy. Mater. Sci. Eng. A 774, 138919 (2020)10.1016/j.msea.2020.138919 ↗
78. Q. Chen, Y. Zhao, S. Strayer, Y. Zhao, K. Aoyagi, Y. Koizumi, A. Chiba, W. Xiong, A.C. To, Elucidating the Effect of Preheating Temperature on Melt Pool Morphology Variation in Inconel 718 Laser Powder Bed Fusion via Simulation and Experiment. Addit. Manuf. 37, 101642 (2021)
79. J. Robinson, I. Ashton, P. Fox, E. Jones, C. Sutcliffe, Determination of the Effect of Scan Strategy on Residual Stress in Laser Powder Bed Fusion Additive Manufacturing. Addit. Manuf. 23, 13–24 (2018)
80. B. Franco, J. Ma, B. Loveall, G. Tapia, K. Karayagiz, J. Liu, A. Elwany, R. Arroyave, I. Karaman, A Sensory Material Approach for Reducing Variability in Additively Manufactured Metal Parts. Sci. Rep. 7(1), 1–12 (2017)10.1038/s41598-016-0028-x ↗
81. A. Yadollahi, N. Shamsaei, Additive Manufacturing of Fatigue Resistant Materials: Challenges and Opportunities. Int. J. Fatigue 98, 14–31 (2017)10.1016/j.ijfatigue.2017.01.001 ↗
82. P. Nath, Z. Hu, S. Mahadevan, Mutli-level uncertainty quantification in additive manufacturing. 2017 International Solid Freeform Fabrication Symposium (University of Texas at Austin, 2017)
83. M.P. Samuel, A.K. Mishra, R. Mishra, Additive Manufacturing of Ti-6Al-4V Aero Engine Parts: Qualification for Reliability. J. Fail. Anal. Prevent. 18(1), 136–144 (2018)10.1007/s11668-018-0393-9 ↗
84. L. Dowling, J. Kennedy, S. O’Shaughnessy, D. Trimble, A Review of Critical Repeatability and Reproducibility Issues in Powder Bed Fusion. Mater. Des. 186, 108346 (2020)10.1016/j.matdes.2019.108346 ↗
85. C.K.P. Vallabh, C. Cetinkaya, Single particle adhesion variability in additive manufacturing powders. J. Adhes. (2019)10.1080/00218464.2019.1622094 ↗
86. Z. Snow, R. Martukanitz, S. Joshi, On the Development of Powder Spreadability Metrics and Feedstock Requirements for Powder Bed Fusion Additive Manufacturing. Addit. Manuf. 28, 78–86 (2019)
87. A.T. Sutton, C.S. Kriewall, M.C. Leu, J.W. Newkirk, Powders for Additive Manufacturing Process: Characterization Techniques and Effects on Part Properties. 2016 International Solid Freeform Fabrication Symposium (University of Texas at Austin, 2016)
88. D.B. Saint John, S.B. Joshi, T.W. Simpson, M. Qu, J.D. Rowatt, Y. Lou, A Preliminary Examination of Variability Due to Build Location and Powder Feedstock in Additive Manufacture of Inconel 718 using Laser-Based Powder Bed Fusion. 2016 International Solid Freeform Fabrication Symposium (University of Texas at Austin, 2016)
89. R. Williams, M. Bilton, N. Harrison, P. Fox, The Impact of Oxidised Powder Particles on the Microstructure and Mechanical Properties of Ti-6Al-4V Processed by Laser Powder Bed Fusion. Addit. Manuf. 46, 102181 (2021)
90. C.L.A. Leung, S. Marussi, M. Towrie, R.C. Atwood, P.J. Withers, P.D. Lee, The Effect of Powder Oxidation on Defect Formation in Laser Additive Manufacturing. Acta Mater. 166, 294–305 (2019)10.1016/j.actamat.2018.12.027 ↗
91. D. Greitemeier, C. Dalle Donne, F. Syassen, J. Eufinger, T. Melz, Effect of Surface Roughness on Fatigue Performance of Additive Manufactured Ti-6Al-4V. Mater. Sci. Technol. 32(7), 629–634 (2016)10.1179/1743284715Y.0000000053 ↗
92. M.A. Obeidi, S.M.U. Mhurchadha, R. Raghavendra, A. Conway, C. Souto, D. Tormey, I.U. Ahad, D. Brabazon, Comparison of the Porosity and Mechanical Performance of 316L Stainless Steel Manufactured on Different Laser Powder Bed Fusion Metal Additive Manufacturing Machines. J. Mater. Res. Technol. 13, 2361–2374 (2021)10.1016/j.jmrt.2021.06.027 ↗
93. D.J. Huang, H. Li, A Machine Learning Guided Investigation of Quality Repeatability in Metal Laser Powder Bed Fusion Additive Manufacturing. Mater. Des. 203, 109606 (2021)10.1016/j.matdes.2021.109606 ↗
94. M. Roy, O. Wodo, Data-Driven Modeling of Thermal History in Additive Manufacturing. Addit. Manuf. 32, 101017 (2020)
95. S.M.J. Razavi, B. Van Hooreweder, F. Berto, Effect of Build Thickness and Geometry on Quasi-Static and Fatigue Behavior of Ti-6Al-4V Produced by Electron Beam Melting. Addit. Manuf. 36, 101426 (2020)
96. D. Li, R. Qin, B. Chen, J. Zhou, Analysis of Mechanical Properties of Lattice Structures with Stochastic Geometric Defects in Additive Manufacturing. Mater. Sci. Eng. A 822, 141666 (2021)10.1016/j.msea.2021.141666 ↗
97. H. Wan, W. Yang, L. Wang, Z. Zhou, C. Li, G. Chen, L. Lei, G. Zhang, Toward Qualification of Additively Manufactured Metal Parts: Tensile and Fatigue Properties of Selective Laser Melted Inconel 718 Evaluated using Miniature Specimens. J. Mater. Sci. Technol. 97, 239–253 (2022)10.1016/j.jmst.2021.04.049 ↗
98. A. Triantaphyllou, C.L. Giusca, G.D. Macaulay, F. Roerig, M. Hoebel, R.K. Leach, B. Tomita, K.A. Milne, Surface Texture Measurement for Additive Manufacturing. Surf. Topogr. Metrol. Prop. 3(2), 024002 (2015)10.1088/2051-672X/3/2/024002 ↗
99. K. Solberg, F. Berto, A Diagram for Capturing and Predicting Failure Locations in Notch Geometries Produced by Additive Manufacturing. Int. J. Fatigue 134, 105428 (2020)10.1016/j.ijfatigue.2019.105428 ↗
100. G. Mohr, S.J. Altenburg, K. Hilgenberg, Effects of Inter Layer Time and Build Height on Resulting Properties of 316L Stainless Steel Processed by Laser Powder Bed Fusion. Addit. Manuf. 32, 101080 (2020)