Creep and High-Temperature Tensile Deformation Behavior of the TIG Welded P92/304L Dissimilar Steel Weld Joints
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. J. Akram, P.R. Kalvala, M. Misra, and I. Charit, Creep Behavior of Dissimilar Metal Weld Joints Between P91 and AISI 304, Mater. Sci. Eng. A, 2017, 688, p 396–406. https://doi.org/10.1016/j.msea.2017.02.02610.1016/j.msea.2017.02.026 ↗
2. R. Viswanathan, J.F. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis et al., U.S. Program on materials technology for ultra-supercritical coal power plants, J. Mater. Eng. Perform., 2013, 22, p 2904–2915. https://doi.org/10.1007/s11665-013-0717-610.1007/s11665-013-0717-6 ↗
3. C. Pandey and M.M. Mahapatra, Evolution of Phases During Tempering of P91 Steel at 760 °C for Varying Tempering Time and Their Effect on Microstructure and Mechanical Properties, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 2017, 231, p 1141–1161. https://doi.org/10.1177/095440891665667810.1177/0954408916656678 ↗
4. F. Abe, Research and Development of Heat-Resistant Materials for Advanced USC Power Plants with Steam Temperatures of 700 °C and Above, Engineering, 2015, 1, p 211–224. https://doi.org/10.15302/J-ENG-201503110.15302/J-ENG-2015031 ↗
5. H. Nomoto, Development in Materials for Ultra-Supercritical (USC) and Advanced Ultra-Supercritical (A-USC) Steam Turbines, Elsevier Ltd, Amsterdam, 2017. https://doi.org/10.1016/B978-0-08-100314-5.00012-910.1016/B978-0-08-100314-5.00012-9 ↗
6. G. Dak and C. Pandey, A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application, J. Manuf. Process., 2020, 58, p 377–406. https://doi.org/10.1016/j.jmapro.2020.08.01910.1016/j.jmapro.2020.08.019 ↗
7. A. Kumar and C. Pandey, Development and Evaluation of Dissimilar Gas Tungsten Arc-Welded Joint of P92 Steel/Inconel 617 Alloy for Advanced Ultra-Supercritical Boiler Applications, Metall. Mater. Trans. A, 2022 https://doi.org/10.1007/s11661-022-06723-010.1007/s11661-022-06723-0 ↗
8. P.J. Ennis, W.J. Quadakkers, F. Abe, T.U. Kern, and R. Viswanathan, Mechanisms of Oxidation and the Influence of Steam Oxidation on Service Life of Steam Power Plant Components, Creep-Resistant Steels. F. Abe, T.U. Kern, R. Viswanathan Ed., Woodhead Publishing, Cambridge, 2008, p 519–53610.1533/9781845694012.2.519 ↗
9. W. Zhang, X. Wang, J. Gong, Y. Jiang, and X. Huang, Experimental and Simulated Characterization of Creep Behavior of P92 Steel with Prior Cyclic Loading Damage, J. Mater. Sci. Technol., 2017 https://doi.org/10.1016/j.jmst.2017.09.00610.1016/j.jmst.2017.09.006 ↗
10. J.H. Hwang, G.D. Song, D.W. Kim, Y.H. Huh, B.C. Park, J. Hahn et al., Tensile and Fatigue Properties of Super304H Welded Joint at Elevated Temperatures, Int. J. Fatigue, 2021, 143, p 105989. https://doi.org/10.1016/j.ijfatigue.2020.10598910.1016/j.ijfatigue.2020.105989 ↗
11. J. Kang, Q. Wang, Z. Wang, Z. Han, R. Xin, and X. Jiao, Fatigue Fracture Mechanism of T92/HR3C Dissimilar METAL Weld Joints at Elevated Temperature, Mater Charact, 2022, 190, p 112081. https://doi.org/10.1016/j.matchar.2022.11208110.1016/j.matchar.2022.112081 ↗
12. S. Kumar, C. Pandey, and A. Goyal, A Microstructural and Mechanical Behavior Study of Heterogeneous P91 Welded Joint, Int. J. Press. Vessel. Pip., 2020, 185, p 104128. https://doi.org/10.1016/j.ijpvp.2020.10412810.1016/j.ijpvp.2020.104128 ↗
13. H. Shah Hosseini, M. Shamanian, and A. Kermanpur, Microstructural and Weldability Analysis of Inconel617/AISI 310 Stainless Steel Dissimilar Welds, Int. J. Press. Vessel. Pip., 2016, 144, p 18–24. https://doi.org/10.1016/j.ijpvp.2016.05.00410.1016/j.ijpvp.2016.05.004 ↗
14. M. Bucior, R. Kluz, T. Trzepieciński, K. Jurczak, A. Kubit, and K. Ochał, The Effect of Shot Peening on Residual Stress and Surface Roughness of AMS 5504 Stainless Steel Joints Welded Using the TIG Method, Materials (Basel), 2022 https://doi.org/10.3390/ma1524883510.3390/ma15248835 ↗
15. J. Górka, W. Jamrozik, and M. Kiel-Jamrozik, The Effect of TIG Welding on the Structure and Hardness of Butt Joints Made of Inconel 718, Heliyon, 2023 https://doi.org/10.1016/j.heliyon.2023.e1317510.1016/j.heliyon.2023.e13175 ↗
16. B. Szczucka-Lasota, T. Węgrzyn, T. Szymczak, B. Łazarz, A. Pereria Silva, and A. Jurek, Welding of P355NH Steel for the Construction of a Medium-Pressure Gas Pipeline, Contin. Mech. Thermodyn., 2024, 36, p 107–118. https://doi.org/10.1007/s00161-023-01265-110.1007/s00161-023-01265-1 ↗
17. J. Tomków, K. Sobota, and S. Krajewski, Influence of Tack Welds Distribution and Welding Sequence on the Angular Distortion of TIG Welded Joint, Facta Univ. Ser. Mech. Eng., 2020, 18, p 611–621. https://doi.org/10.22190/FUME200520044T10.22190/FUME200520044T ↗
18. S. Sirohi, A. Gupta, C. Pandey, R.S. Vidyarthy, K. Guguloth, and H. Natu, Investigation of the Microstructure and Mechanical Properties of the Laser Welded Joint of P22 and P91 Steel, Opt. Laser Technol., 2022, 147, p 107610. https://doi.org/10.1016/j.optlastec.2021.10761010.1016/j.optlastec.2021.107610 ↗
19. W. Ou, J. Xiong, X. Li, F. Nie, T. Li, G. Mao et al., Mechanisms for Creep Rupture of 12Cr/Alloy 4715 Dissimilar Weldments, Eng. Fail. Anal., 2023, 144, p 106945. https://doi.org/10.1016/j.engfailanal.2022.10694510.1016/j.engfailanal.2022.106945 ↗
20. K. Laha, K.S. Chandravathi, P. Parameswaran, S. Goyal, and M.D. Mathew, A Comparison of Creep Rupture Strength of Ferritic/Austenitic Dissimilar Weld Joints of Different Grades of Cr-Mo Ferritic Steels, Metall. Mater. Trans. A, 2012, 43, p 1174–1186. https://doi.org/10.1007/s11661-011-0957-810.1007/s11661-011-0957-8 ↗
21. W.K. Wang, Y. Liu, Q.B. Zhang, L.J. Zhang, and J.X. Zhang, Microstructure and Local Mechanical Properties of a Dissimilar Metal Welded Joint with Buttering Layer in Steam Turbine Rotor, Mater. Sci. Eng. A, 2019, 747, p 244–254. https://doi.org/10.1016/j.msea.2018.12.01810.1016/j.msea.2018.12.018 ↗
22. S. Rathore, A. Kumar, S. Sirohi, V. Singh, A. Gupta, D. Fydrych et al., Role of Buttering Layer Composition on Microstructural Heterogeneity and Mechanical Properties of Alloy 617 and P92 Steel Dissimilar Welded Joints for Future Indian AUSC Program, Int. J. Adv. Manuf. Technol., 2024 https://doi.org/10.1007/s00170-024-13747-w10.1007/s00170-024-13747-w ↗
23. M.L. Huang and L. Wang, Carbon Migration in 5Cr-0.5Mo/21Cr-12Ni Dissimilar Metal Welds, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 1998, 29, p 3037–3046. https://doi.org/10.1007/s11661-998-0211-110.1007/s11661-998-0211-1 ↗
24. G. Dak, S.M. Pandey, and C. Pandey, Residual Stress Analysis, Microstructural Characterization, and Mechanical Properties of Tungsten Inert Gas-Welded P92/AISI 304L Dissimilar Steel Joints, Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., 2022 https://doi.org/10.1177/1464420722112449410.1177/14644207221124494 ↗
25. C. Pandey, Mechanical and Metallurgical Characterization of Dissimilar P92/SS304 L Welded Joints Under Varying Heat Treatment Regimes, Metall. Mater. Trans. A, 2020 https://doi.org/10.1007/s11661-020-05660-010.1007/s11661-020-05660-0 ↗
26. J.M. Race, Carbon Diffusion Across Dissimilar Steel Welds. PhD Thesis, 1992.
27. E. Borzabadi Farahani, B. Sobhani Aragh, and W.J. Mansur, Three-dimensional finite element modelling of welding residual stresses of medium carbon steel pipes with consideration of solid-state austenite-martensite transformation and post-weld heat treatment, Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., 2019, 233, p 2352–2364. https://doi.org/10.1177/146442071985020510.1177/1464420719850205 ↗
28. J.A. Williams, Residual Stresses in Austenitic/Ferritic Transition Joints Fabricated With Austenitic Weld Metal, High Temp. Technol., 1984, 2, p 135–140. https://doi.org/10.1080/02619180.1984.1175325510.1080/02619180.1984.11753255 ↗
29. S. Gopi, D.G. Mohan, and E. Natarajan, Mechanical and Corrosion Properties of Friction Stir Welded and Tungsten Inert Gas Welded Phosphor Bronze, Adv. Mater. Sci., 2023, 23, p 83–98.10.2478/adms-2023-0024 ↗
30. H.Y. Lee, S.H. Lee, J.B. Kim, and J.H. Lee, Creep-Fatigue Damage for a Structure with Dissimilar Metal Welds of Modified 9Cr-1Mo Steel and 316L Stainless Steel, Int. J. Fatigue, 2007, 29, p 1868–1879. https://doi.org/10.1016/j.ijfatigue.2007.02.00910.1016/j.ijfatigue.2007.02.009 ↗
31. D.J. Abson and J.S. Rothwell, Review of Type IV Cracking of Weldments in 9-12% Cr Creep Strength Enhanced Ferritic Steels, Int. Mater. Rev., 2013, 58, p 437–473. https://doi.org/10.1179/1743280412Y.000000001610.1179/1743280412Y.0000000016 ↗
32. C. Pandey, M. Mohan, P. Kumar, and N. Saini, Some Studies on P91 Steel and Their Weldments, J. Alloys Compd., 2018, 743, p 332–364. https://doi.org/10.1016/j.jallcom.2018.01.12010.1016/j.jallcom.2018.01.120 ↗
33. J.A. Francis, W. Mazur, and H.K.D.H. Bhadeshia, Type IV Cracking in Ferritic Power Plant Steels, Mater. Sci. Technol., 2006, 22, p 1387–1395. https://doi.org/10.1179/174328406X14877810.1179/174328406X148778 ↗
34. W. Yan, W. Wang, Y.Y. Shan, and K. Yang, Microstructural Stability of 9-12%Cr Ferrite/Martensite Heat-Resistant Steels, Front. Mater. Sci., 2013, 7, p 1–27. https://doi.org/10.1007/s11706-013-0189-510.1007/s11706-013-0189-5 ↗
35. T. Matsunaga, H. Hongo, and M. Tabuchi, Interfacial Failure in Dissimilar Weld Joint of High Boron 9% Chromium Steel and Nickel-Based Alloy Under High-Temperature Creep Condition, Mater. Sci. Eng. A, 2017, 695, p 302–308. https://doi.org/10.1016/j.msea.2017.04.01210.1016/j.msea.2017.04.012 ↗
36. J. Cao, Y. Gong, and Z. Yang, Microstructural Analysis on Creep Properties of Dissimilar Materials Joints Between T92 Martensitic and HR3C Austenitic Steels, Mater. Sci. Eng. A, 2011, 528, p 6103–6111. https://doi.org/10.1016/j.msea.2011.04.05710.1016/j.msea.2011.04.057 ↗
37. Y. Zhang, K. Li, Z. Cai, and J. Pan, Creep Rupture Properties of Dissimilar Metal Weld Between Inconel 617B and Modified 9%Cr Martensitic Steel, Mater. Sci. Eng. A, 2019, 764, p 138185. https://doi.org/10.1016/j.msea.2019.13818510.1016/j.msea.2019.138185 ↗
38. R.L. Klueh and J.F. King, Austenitic Stainless Steel-Ferritic Steel Weld Joint Failures, Weld. J. (Miami Fla), 1982, 61, p 302–311.
39. J.N. DuPont, Microstructural Evolution and High Temperature Failure of Ferritic to Austenitic Dissimilar Welds, Int. Mater. Rev., 2012, 57, p 208–234. https://doi.org/10.1179/1743280412Y.000000000610.1179/1743280412Y.0000000006 ↗
40. G. Dak and C. Pandey, Study on Effect of Weld Groove Geometry on Mechanical Behavior and Residual Stresses Variation in Dissimilar Welds of P92/SS304L Steel for USC Boilers, Vol 8 Springer, London, 2022. https://doi.org/10.1007/s43452-022-00468-810.1007/s43452-022-00468-8 ↗
41. G. Dak and C. Pandey, Experimental Investigation on Microstructure, Mechanical Properties, and Residual Stresses of Dissimilar Welded Joint of Martensitic P92 and AISI 304L Austenitic Stainless Steel, Int. J. Press. Vessel. Pip., 2021, 194, p 104536. https://doi.org/10.1016/j.ijpvp.2021.10453610.1016/j.ijpvp.2021.104536 ↗
42. ASTM E8, ASTM E8/E8M Standard Test Methods for Tension Testing of Metallic Materials 1, Annu. B ASTM Stand. 4, 2010 https://doi.org/10.1520/E000810.1520/E0008 ↗
43. ASTM International, E139 - Standard Test Method for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials, Annu. B ASTM Stand., 2018, 11, p 1–14. https://doi.org/10.1520/E0139-11R18.responsibility10.1520/E0139-11R18.responsibility ↗
44. J.H. Lee, J.H. Hwang, Y.S. Park, T.M. Kim, D.H. Bae, W.B. Seo et al., Assessing Mechanical Properties of the Dissimilar Metal Welding Between P92 Steels and Alloy 617 at High Temperature, J. Mech. Sci. Technol., 2016, 30, p 4453–4457. https://doi.org/10.1007/s12206-016-0911-110.1007/s12206-016-0911-1 ↗
45. G. Sainath, B.K. Choudhary, J. Christopher, E. Isaac Samuel, and M.D. Mathew, Effects of Temperature and Strain Rate on Tensile Stress–Strain and Workhardening Behaviour of P92 Ferritic Steel, Mater. Sci. Technol. (U.K.), 2014, 30, p 911–920. https://doi.org/10.1179/1743284713Y.000000034910.1179/1743284713Y.0000000349 ↗
46. J.B. Wen, C.Y. Zhou, X. Li, X.M. Pan, L. Chang, G.D. Zhang et al., Effect of Temperature Range on Thermal-Mechanical Fatigue Properties of P92 Steel and Fatigue Life Prediction with a New Cyclic Softening Model, Int. J. Fatigue, 2019, 129, p 105226. https://doi.org/10.1016/j.ijfatigue.2019.10522610.1016/j.ijfatigue.2019.105226 ↗
47. B.R. Antoun, C. Alleman, K. De La Trinidad, Experimental Investigation of dynamic strain aging in 304L Stainless Steel, Conference Proceedings of the Society for Experimental Mechanics Series, 2019, p 65–72. https://doi.org/10.1007/978-3-319-95053-2_10.10.1007/978-3-319-95053-2_10 ↗
48. A. Zergani, H. Mirzadeh, and R. Mahmudi, Evolutions of Mechanical Properties of AISI 304L Stainless Steel Under Shear Loading, Mater. Sci. Eng. A, 2020, 791, p 139667. https://doi.org/10.1016/j.msea.2020.13966710.1016/j.msea.2020.139667 ↗
49. A.K. Gupta, H.N. Krishnamurthy, Y. Singh, K.M. Prasad, and S.K. Singh, Development of Constitutive Models for Dynamic Strain Aging Regime in Austenitic Stainless Steel 304, Mater. Des., 2013, 45, p 616–627. https://doi.org/10.1016/j.matdes.2012.09.04110.1016/j.matdes.2012.09.041 ↗
50. B. He, L. Cui, D. Wang, Y. Liu, C. Liu, and H. Li, The Metallurgical Bonding and High Temperature Tensile Behaviors of 9Cr-1W Steel and 316L Steel Dissimilar Joint by Friction Stir Welding, J. Manuf. Process., 2019, 44, p 241–251. https://doi.org/10.1016/j.jmapro.2019.05.03310.1016/j.jmapro.2019.05.033 ↗
51. Q. Wang, R. Xin, Z. Wang, Z. Han, X. Jiao, and J. Kang, Microstructure and Its Effect on High Temperature Tensile Properties of T92/HR3C Dissimilar Weld Joints, J. Manuf. Process., 2022, 82, p 792–799. https://doi.org/10.1016/j.jmapro.2022.08.04610.1016/j.jmapro.2022.08.046 ↗
52. G. Dak, K. Guguloth, A. Bhattacharyya, P. Kumar, and C. Pandey, Failure Study of Creep and High-Temperature Tensile Tested Tungsten Inert Gas Welded P92 Steel and AISI 304L Steel Dissimilar Weld Joints, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-09070-210.1007/s11665-023-09070-2 ↗
53. G. Dak, K. Guguloth, R.S. Vidyarthy, D. Fydrych, and C. Pandey, Creep Rupture Study of Dissimilar Welded Joints of P92 and 304L Steels, Weld. World, 2024 https://doi.org/10.1007/s40194-024-01757-x10.1007/s40194-024-01757-x ↗
54. J. Swaminathan, K. Guguloth, M. Gunjan, P. Roy, and R. Ghosh, Failure Analysis and Remaining Life Assessment of Service Exposed Primary Reformer Heater Tubes, Eng. Fail. Anal., 2008, 15, p 311–331. https://doi.org/10.1016/j.engfailanal.2007.02.00410.1016/j.engfailanal.2007.02.004 ↗
55. A.H.V. Pavan, K.S.N. Vikrant, R. Ravibharath, and K. Singh, Development and Evaluation of SUS 304H—IN 617 Welds for Advanced Ultra Supercritical Boiler Applications, Mater. Sci. Eng. A, 2015, 642, p 32–41. https://doi.org/10.1016/j.msea.2015.06.06510.1016/j.msea.2015.06.065 ↗
56. K.Y. Shin, J.W. Lee, J.M. Han, K.W. Lee, B.O. Kong, and H.U. Hong, Transition of Creep Damage Region in Dissimilar Welds Between Inconel 740H Ni-Based Superalloy and P92 Ferritic/Martensitic Steel, Mater Charact, 2018, 139, p 144–152. https://doi.org/10.1016/j.matchar.2018.02.03910.1016/j.matchar.2018.02.039 ↗
57. Y.I. Gong, J. Cao, L. Ji, C. Yang, C. Yao, Z. Yang et al., Assessment of Creep Rupture Properties for Dissimilar Steels Welded Joints Between T92 and HR3C, Fatigue Fract. Eng. Mater. Struct., 2010 https://doi.org/10.1111/j.1460-2695.2010.01496.x10.1111/j.1460-2695.2010.01496.x ↗
58. F. Ehrhardt, S.R. Holdsworth, I. Kühn, E. Mazza, and E. Mazza, Creep Fatigue Crack Development in Dissimilar Metal Welded Joints Between Steels and nickel Based Alloy, Mater. Res. Innov., 2016 https://doi.org/10.1179/1433075X13Y.000000013910.1179/1433075X13Y.0000000139 ↗
59. J.H. Zhou, Y.F. Shen, and N. Jia, Strengthening Mechanisms of Reduced Activation Ferritic/Martensitic Steels: A Review, Int. J. Miner. Metall. Mater., 2021, 28, p 335–348. https://doi.org/10.1007/s12613-020-2121-110.1007/s12613-020-2121-1 ↗
60. Q. Lu, W. Ma, W. Yan, K. Yang, Y. Toda, S. van der Zwaag et al., A Novel Martensitic Creep-Resistant Steel Strengthened by MX Carbonitrides with Extremely Low Coarsening Rates: Design and Characterization, Metall. Mater. Trans. E, 2016, 3, p 209–217. https://doi.org/10.1007/s40553-016-0091-z10.1007/s40553-016-0091-z ↗
61. H. Magnusson and R. Sandström, Creep Strain Modeling of 9 to 12 Pct Cr Steels Based on Microstructure Evolution, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2007, 38 A, p 2033–2039. https://doi.org/10.1007/s11661-007-9256-910.1007/s11661-007-9256-9 ↗
62. X. Xia, B. Zhu, X. Jin, M. Tang, L. Yang, F. Xue et al., Analysis on Microstructure and Properties Evolution and Life Prediction of P92 Steel in High Temperature Service, Int. J. Press. Vessel. Pip., 2021, 194, p 104482. https://doi.org/10.1016/j.ijpvp.2021.10448210.1016/j.ijpvp.2021.104482 ↗
63. M. Godec and D.A.S. Balantič, Coarsening Behaviour of M23C6 Carbides in Creep-Resistant Steel Exposed to High Temperatures, Sci. Rep., 2016, 6, p 1–7. https://doi.org/10.1038/srep2973410.1038/srep29734 ↗
64. S.T. Mandziej, A.M. Analysis, A. Vyrostkova, C. Chovet, and Liquide A, Microstructure and Creep Rupture of P92-Grade Weld Metal, Weld World, 2013 https://doi.org/10.1007/BF0332129410.1007/BF03321294 ↗
65. G. Golański, A. Zielińska-Lipiec, A. Zieliński, and M. Sroka, Effect of Long-Term Service on Microstructure and Mechanical Properties of Martensitic 9% Cr Steel, J. Mater. Eng. Perform., 2017, 26, p 1101–1107. https://doi.org/10.1007/s11665-017-2556-310.1007/s11665-017-2556-3 ↗
66. V. Sklenicka, K. Kucharova, M. Svobodova, P. Kral, M. Kvapilova, and J. Dvorak, The Effect of a Prior Short-Term Ageing On mechanical and Creep Properties of P92 Steel, Mater Charact, 2018, 136, p 388–397. https://doi.org/10.1016/j.matchar.2018.01.00810.1016/j.matchar.2018.01.008 ↗
67. E. Gariboldi, M. Cabibbo, S. Spigarelli, and D. Ripamonti, Investigation on Precipitation Phenomena of Ni-22Cr-12Co-9Mo Alloy Aged and Crept at High Temperature, Int. J. Press. Vessel. Pip., 2008, 85, p 63–71. https://doi.org/10.1016/j.ijpvp.2007.06.01410.1016/j.ijpvp.2007.06.014 ↗
68. X. Wang, X. Wang, H. Li, H.L. Wu, Y.Y. Ren, H.W. Liu et al., Laves Phase Precipitation Behavior in the Simulated Fine-Grained Heat-Affected Zone of Creep Strength Enhanced Ferritic Steel P92 and Its Role in Creep Void Nucleation and Growth, Weld. World, 2017, 61, p 231–239. https://doi.org/10.1007/s40194-017-0424-210.1007/s40194-017-0424-2 ↗
69. S. Petchsang, I. Phung-on, and B. Poopat, Life Assessment for Cr-Mo Steel Dissimilar Joints by Various Filler Metals Using Accelerated Creep Testing, J. Mater. Eng. Perform., 2016, 25, p 5424–5439. https://doi.org/10.1007/s11665-016-2386-810.1007/s11665-016-2386-8 ↗
70. W. Liu, X. Liu, F. Lu, X. Tang, H. Cui, and Y. Gao, Creep Behavior and Microstructure Evaluation of Welded Joint in Dissimilar Modified 9Cr-1Mo Steels, Mater. Sci. Eng. A, 2015, 644, p 337–346. https://doi.org/10.1016/j.msea.2015.07.06810.1016/j.msea.2015.07.068 ↗
71. V. Sklenička, K. Kuchařová, M. Svobodová, M. Kvapilová, P. Král, and L. Horváth, Creep Properties in Similar Weld Joint of a Thick-Walled P92 Steel Pipe, Mater Charact, 2016, 119, p 1–12. https://doi.org/10.1016/j.matchar.2016.06.03310.1016/j.matchar.2016.06.033 ↗