DLC-coating Application to Improve the Durability of Ceramic Tools
Source abstract
Abstract
The work is devoted to the experimental study of the efficiency of Arc-PVD and PACVD industrial technologies for the application of diamond-like carbon (DLC) coatings on ceramic cutting plates based on Al2O3 + TiC to increase the wear resistance of the tool when turning of bearing hardened steel 102Cr6. The authors conducted a set of studies and tests as the study of the structure of DLC coatings (correlation between sp3 and sp2 bonds) using photoelectron spectroscopy; evaluation of roughness, microhardness and adhesive bond strength of DLC coatings with the ceramic base; study of coated ceramics wear under fretting conditions; and experimental evaluation of the effect of DLC coatings on the resistance of ceramic plates during turning of hardened steel. The durability of ceramic plates was increased by 1.6 times by applying PACVD DLC coatings. A slightly smaller effect in 1.4 times was achieved by applying DLC coatings using Arc-PVD technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. G.T. Smith, Cutting Tool Technology: Industrial Handbook, Springer, Berlin, 2008
2. T. Atkins, Science and Engineering of Cutting: The Mechanics and Processes of Separating, Scratching And Puncturing Biomaterials, Metals and Non-Metals, Elsevier Butterworth-Heinemann, Burlington, 2009
3. Y. Su, L. Tian, R. Hu et al., Effect of Sputtering Current on the Comprehensive Properties of (Ti, Al)N Coating and High-Speed Steel Substrate, J. Mater. Eng. Perform., 2018, 27, p 2381–238710.1007/s11665-018-3314-x ↗
4. S.N. Grigoriev, A.A. Vereschaka, S.V. Fyodorov, N.N. Sitnikov, and A.D. Batako, Comparative Analysis of Cutting Properties and Nature of Wear of Carbide Cutting Tools with Multi-Layered Nano-Structured and Gradient Coatings Produced by Using of Various Deposition Methods, Int. J. Adv. Manuf. Technol., 2017, 99, p 3421–343810.1007/s00170-016-9676-z ↗
5. C. Lou, L. Zhang, and X. Lu, Effects of High Current Pulsed Electron Beam Irradiation on the Mechanical Properties and Cutting Performance of TiAlN-Coated Tools, J. Mater. Eng. Perform., 2017, 26, p 5864–587010.1007/s11665-017-3073-0 ↗
6. W. Ji, Y. Yuan, B. Zou et al., Friction and Wear Behaviour of Cemented Carbide Tool Materials Sliding Against Al2O3 and Si3N4 Ceramics Under Dry Condition, Ceram. Int., 2018, 44, p 17486–1749110.1016/j.ceramint.2018.06.218 ↗
7. Y. Su, L. Li, G. Wang et al., Cutting Mechanism and Performance of High-Speed Machining of a Titanium Alloy Using a Super-Hard Textured Tool, J. Manuf. Process., 2018, 34, p 706–71210.1016/j.jmapro.2018.07.004 ↗
8. R. Kumar, A.K. Sahoo, P.C. Mishra et al., Comparative Study on Machinability Improvement in Hard Turning Using Coated and Uncoated Carbide Inserts: Part II, Modeling, Multi-Response Optimization, Tool Life, Economic Aspects, Adv. Manuf., 2018, 6, p 155–17510.1007/s40436-018-0214-0 ↗
9. X.P. Zhang, J.H. Ouyang, Y.J. Wang et al., Microstructure and High-Temperature Mechanical Properties of ZrO2-Al2O3-SiC Ceramics, J. Mater. Eng. Perform., 2015, 24, p 3615–362110.1007/s11665-015-1650-7 ↗
10. M. Shalaby and S. Veldhuis, New Observations on High-Speed Machining of Hardened AISI, 4340 Steel Using Alumina-Based Ceramic Tools, J. Manuf. Mater. Process., 2018, 2, p 27
11. A.A. Vereschaka, S.N. Grigoriev, M.A. Volosova et al., Nano-Scale Multi-Layered Coatings for Improved Efficiency of Ceramic Cutting Tools, Int. J. Adv. Manuf. Technol., 2016, 90, p 27–4310.1007/s00170-016-9353-2 ↗
12. K. Golombek, A.E. Tomiczek, D. Pakula et al., Characterization Of Nanocrystalline AlTiSiN Coatings Deposited by a Larc-CAE Process, Arch. Metall. Mater., 2018, 63, p 899–906
13. F. Ge, X. Zhou, F. Meng et al., Tribological Behavior of VC/Ni Multilayer Coatings Prepared by Non-Reactive Magnetron Sputtering, Tribol. Int., 2016, 99, p 140–15010.1016/j.triboint.2015.10.019 ↗
14. M.A. Volosova, S.N. Grigoriev, and E.A. Ostrikov, Use of Laser Ablation for Formation of Discontinuous (Discrete) Wear-Resistant Coatings Formed on Solid Carbide Cutting Tool By electron Beam Alloying and Vacuum-Arc Deposition, Mech. Ind., 2016, 17, p 72010.1051/meca/2017009 ↗
15. A. Koepf, J. Keckes, J. Todt et al., Nanostructured Coatings for Tooling Applications, Int. J. Refract. Met. Hard Mater., 2017, 62, p 219–22410.1016/j.ijrmhm.2016.06.017 ↗
16. A.A. Vereschaka, S.N. Grigoriev, N.N. Sitnikov et al., Delamination and Longitudinal Cracking in Multi-Layered Composite Nanostructured Coatings and Their Influence on Cutting Tool Life, Wear, 2017, 390–391, p 209–21910.1016/j.wear.2017.07.021 ↗
17. K.-D. Bouzakis, N. Michailidis, G. Skordaris et al., Cutting with Coated Tools: Coating Technologies, Characterization Methods and Performance Optimization, CIRP Ann. Manuf. Technol., 2012, 61, p 703–72310.1016/j.cirp.2012.05.006 ↗
18. Y.-W. Lin, H.-A. Chen, G.-P. Yu, and J.-H. Huang, Effect of Bias on the Structure and Properties of TiZrN Thin Films Deposited by Unbalanced Magnetron Sputtering, Thin Solid Films, 2016, 618, p 13–2010.1016/j.tsf.2016.05.021 ↗
19. M. Volosova, S. Grigoriev, A. Metel, and A. Shein, The Role of Thin-Film Vacuum-Plasma Coatings and Their Influence on the Efficiency of Ceramic Cutting Inserts, Coatings, 2018, 8, p 28710.3390/coatings8080287 ↗
20. E. Uhlmann, T. Huhns, S. Richarz, W. Reimers, and S. Grigoriev, Development and Application of Coated Ceramic Cutting Tools, Adv. Sci. Technol., 2006, 45, p 1155–116210.4028/www.scientific.net/AST.45.1155 ↗
21. K. Aslantas, I. Ucun, and A. Cicek, Tool Life and Wear Mechanism of Coated and Uncoated Al2O3/TICN Mixed Ceramic Tools in Turning Hardened Alloy Steel, Wear, 2012, 274, p 442–45110.1016/j.wear.2011.11.010 ↗
22. S.R. Das, A. Kumar, and D. Dhupal, Surface Roughness Analysis of Hardened Steel Using TiN Coated Ceramic Inserts, Int. J. Mach. Machinability Mater., 2015, 17, p 22–38
23. Y. Long, J. Zeng, D. Yu et al., Microstructure of TiAlN and CrAlN Coatings and Cutting Performance of Coated Silicon Nitride Inserts in Cast Iron Turning, Ceram. Int., 2014, 40, p 9889–989410.1016/j.ceramint.2014.02.083 ↗
24. H. Kovaci, A.F. Yetim, O. Baran et al., Tribological Behavior of DLC Films and Duplex Ceramic Coatings Under Different Sliding Conditions, Ceram. Int., 2018, 44, p 7151–715810.1016/j.ceramint.2018.01.158 ↗
25. M. Kot, L. Major, K. Chronowska-Przywara et al., The Advantages of Incorporating CrxC Nanograins into an a-C: H Matrix in Tribological Coatings, Mater. Des., 2014, 56, p 981–98910.1016/j.matdes.2013.12.023 ↗
26. L. Wang, X. Nie, and X. Hu, Effect of Thermal Annealing on Tribological and Corrosion Properties of DLC Coatings, J. Mater. Eng. Perform., 2013, 22, p 3093–310010.1007/s11665-013-0585-0 ↗
27. K.-W. Chen and J.-F. Lin, The Study of Adhesion and Nanomechanical Properties of DLC Films Deposited on Tool Steels, Thin Solid Films, 2008, 517, p 4916–492010.1016/j.tsf.2009.03.124 ↗
28. G.G. Kirpilenko, V.D. Frolov, E.V. Zavedeev, and S.M. Pimenov, Synthesis, Characterization and Nanostructuring of (a-C:H): Si and (a-C:H):Si:Metal Films, Diam. Relat. Mater., 2006, 15, p 11410.1016/j.diamond.2005.10.026 ↗
29. W.M. Silva, L.M. Jesus, J.R. Carneiro, P.S. Souza, P.S. Martins, and V.J. Trava-Airoldi, Performance of Carbide Tools Coated with DLC in the Drilling of SAE 323 Aluminum Alloy, Surf. Coat. Technol., 2015, 284, p 404–40910.1016/j.surfcoat.2015.09.061 ↗
30. K. Bewilogua and D. Hofmann, History of Diamond-Like Carbon Films—From First Experiments to Worldwide Applications, Surf. Coat. Technol., 2014, 242, p 21410.1016/j.surfcoat.2014.01.031 ↗
31. M. Goto, Preparations and Tribological Properties of Soft-Metal/DLC Composite Coatings by RF Magnetron Sputter Using Composite Targets, Int. J. Mech. Mater. Des., 2018, 14, p 313–32710.1007/s10999-017-9376-3 ↗
32. M.R. Derakhshandeh, M.J. Eshraghi, M.M. Hadavi et al., Diamond-Like Carbon Thin Films Prepared by Pulsed-DC PE-CVD for Biomedical Applications, Surf. Innov., 2018, 6, p 167–17510.1680/jsuin.17.00069 ↗
33. Q.-L. Jiang, H.-Q. Wang, H. Zhou et al., Ultra-Thick Multilayer Ti-Doped DLC Films Deposited by Double Bend-Tube Magnetic Filter Cathode Vacuum Arc Technology, China Surf. Eng., 2018, 31, p 53–60
34. F.-E. Yang, X.-X. Chang, L.-L. Lin et al., Effects of Single Layer Thickness of CNx on Microstructure and Mechanical Properties of DLC/CNx Multilayer Films, China Surf. Eng., 2018, 31, p 66–74
35. X. Jin, Y. Zhang, L. Chen et al., Preparation and Tribological Behaviors of DLC/Spinel Composite Film on 304 Stainless Steel Formed by Cathodic Plasma Electrolytic Oxidation, Surf. Coat. Technol., 2018, 338, p 38–4410.1016/j.surfcoat.2018.01.069 ↗
36. F.A. Delfin, S.P. Bruhl, C. Forsich, and D. Heim, Carbon Based DLC Films: INFLUENCE of the Processing Parameters on the Structure and Properties, Materia-Rio De Janeiro, 2018, 23, p UNSP e-12059
37. M. Dudek, Characteristics of Carbide Interfacial Layer Formed During Deposition Of DLC Films on 316l Stainless Steel Substrate, Arch. Metall. Mater., 2017, 62, p 2211–221610.1515/amm-2017-0326 ↗
38. J. Robertson, Diamond-Like Amorphous Carbon, Mater. Sci. Eng. R-Rep., 2002, 37, p 12910.1016/S0927-796X(02)00005-0 ↗
39. M. Scarselli, P. Castrucci, and M.D. Crescenzi, Electronic and Optoelectronic Nano-Devices Based on Carbon Nanotubes, J. Phys.: Condens. Matter, 2012, 24, p 313202
40. J. Tenner, R. Zhao, S. Tremmel et al., Tribological Behavior of Carbon Based Coatings Adapted to Lubricant-Free Forming Conditions, Int. J. Precis. Eng. Manuf. Green Technol., 2018, 5, p 361–36710.1007/s40684-018-0038-1 ↗
41. J. Zemek, J. Houdkova, P. Jiricek et al., Amorphous Carbon Nanocomposite Films Doped by Titanium: Surface and Sub-Surface Composition and Bonding, Diam. Relat. Mater., 2018, 81, p 61–6910.1016/j.diamond.2017.11.009 ↗
42. K. Nygren, M. Andersson, J. Högström, W. Fredriksson, F. Björefors, L. Nyholm, and U. Jansson, Influence of Deposition Temperature and Amorphous Carbon on Microstructure and Oxidation Resistance of Magnetron Sputtered Nanocomposite CrC Films, Appl. Surf. Sci., 2014, 305, p 14310.1016/j.apsusc.2014.03.014 ↗
43. K. Lukaszkowicz, E. Jonda, J. Sondor, K. Balin, and J. Kubacki, Characteristics of the AlTiCrN + DLC Coating Deposited with a Cathodic ARC and the PACVD Process, Materiali in Tehnologije, 2016, 50, p 175–18110.17222/mit.2014.104 ↗
44. T.F. Zhang, K.-W. Kim, and K.-H. Kim, Nitrogen-Incorporated Hydrogenated Amorphous Carbon Film Electrodes on Ti Substrates by Hybrid Deposition Technique and Annealing, J. Electrochem. Soc., 2016, 163, p E54–E6110.1149/2.0051603jes ↗
45. S.N. Grigoriev, YuA Melnik, A.S. Metel, and M.A. Volosova, Focused Beams of Fast Neutral Atoms in Glow Discharge Plasma, J. Appl. Phys., 2017, 121, p 22330210.1063/1.4985249 ↗
46. C. Srisang, P. Asanithi, K. Siangchaew, A. Pokaipisit, and P. Limsuwan, Characterization of SiC in DLC/a-Si Films Prepared by Pulsed Filtered Cathodic Arc Using Raman Spectroscopy and XPS, Appl. Surf. Sci., 2012, 258, p 5605–560910.1016/j.apsusc.2012.02.036 ↗
47. S. Takabayashi and T. Takahagi, Surface Oxidation Process of a Diamond-Like Carbon Film Analyzed by Difference X-Ray Photoelectron Spectroscopy, Surf. Interface Anal., 2015, 47, p 345–34910.1002/sia.5714 ↗
48. O.V. Sobol, A.A. Andreev, S.N. Grigoriev et al., Vacuum-Arc Multilayer Nanostructured TiN/Ti Coatings: Structure, Stress State, Properties, Metal Sci. Heat Treat., 2012, 54, p 28–3310.1007/s11041-012-9451-1 ↗
49. R.D. Jamison and Y.-L. Shen, Delamination Analysis of Metal-Ceramic Multilayer Coatings Subject to Nanoindentation, Surf. Coat. Technol., 2016, 303, p 3–1110.1016/j.surfcoat.2016.01.038 ↗
50. M.M. Chaudhri, Some Concerns About the Current Interpretation and Analyses of Indentation Unloading P-h Curves Highlighted with Young’s Modulus Studies of Single Crystals of MgO (100), J. Appl. Phys., 2018, 124, p 09510710.1063/1.5021900 ↗
51. G. Feng, W.D. Nix, Y. Yoon et al., A Study of the Mechanical Properties of Nanowires Using Nanoindentation, J. Appl. Phys., 2006, 99, p 07430410.1063/1.2189020 ↗
52. A.A. Vereschaka and S.N. Grigoriev, Study of Cracking Mechanisms in Multi-Layered Composite Nano-Structured Coatings, Wear, 2017, 378–379, p 43–5710.1016/j.wear.2017.01.101 ↗
53. L.N. Lesnevskiy, M.A. Lyakhovetskiy, and S.V. Savushkina, Fretting Wear of Composite Ceramic Coating Produced on D16 Aluminum-Based Alloy Using Microarc Oxidation, J. Frict. Wear, 2016, 37, p 268–27310.3103/S1068366616030107 ↗
54. D. Zhang, B. Shen, and F. Sun, Study on Tribological Behavior and Cutting Performance of CVD Diamond and DLC Films on Co-Cemented Tungsten Carbide Substrates, Appl. Surf. Sci., 2010, 256, p 2479–248910.1016/j.apsusc.2009.10.092 ↗
55. S. Kosarieh, A. Morina, J. Flemming et al., Wear Mechanisms of Hydrogenated DLC in Oils Containing MoDTC, Tribol. Lett., 2016, 64, p 410.1007/s11249-016-0737-0 ↗
56. A.C. Ferrari and J. Robertson, Raman Spectroscopy of Amorphous, Nanostructured, Diamond-Like Carbon and Nanodiamond, Philos. Trans. R. Soc. A, 2004, 362, p 2477–251210.1098/rsta.2004.1452 ↗
57. S.V. Hainsworth and N.J. Uhure, Diamond Like Carbon Coatings for Tribology: Production Techniques, Characterization Methods and Applications, Int. Mater. Rev., 2007, 52(3), p 153–17410.1179/174328007X160272 ↗
58. T.C. Ha, D.R. McKenzie, M.M.M. Bilek, S.C.H. Kwok, P.K. Chu, and B.K. Tay, Raman Spectroscopy Study of DLC Films Prepared by RF Plasma and Filtered Cathodic Arc, Surf. Coat. Technol., 2007, 201(15), p 6734–673610.1016/j.surfcoat.2006.09.048 ↗
59. V. Zavaleyev, J. Walkowicz, M. Sawczak, M. Klein, D. Moszyński, R. Chodun, and K. Zdunek, Determination of SP3 Fraction in ta-C Coating Using XPS and Raman Spectroscopy, Probl. At. Sci. Technol., 2016, 104(4), p 84–92
60. C. Srisang, P. Asanithi, K. Siangchaew, A. Pokaipisit, and P. Limsuwan, Characterization of SiC in DLC/a-Si Films Prepared by Pulsed Filtered Cathodic Arc Using Raman Spectroscopy and XPS, Appl. Surf. Sci., 2012, 258, p 5605–560910.1016/j.apsusc.2012.02.036 ↗
61. F.-Z. Yang, S.-Q. Wang, L.-R. Shen, and Q.-C. Chen, XPS and Raman Studies of Diamond-Like Carbon Films Prepared by Various Deposition Techniques, Guang Pu Xue Yu Guang Pu Fen Xi, 2011, 31(7), p 1800–1803
62. F.S. Lopes, J.R. Oliveira, J. Milani, L.D. Oliveira, J.P.B. Machado, V.J. Trava-Airoldi, A.O. Lobo, and F.R. Marciano, Biomineralized Diamond-Like Carbon Films Incorporating Titanium Dioxide Nanoparticles Improved Bioactivity Properties and Reduced Biofilm Formation, Mater. Sci. Eng., C, 2017, 81, p 373–37910.1016/j.msec.2017.07.043 ↗
63. J.M. Lackner, S. Gumus, S. Polat, and W. Waldhauser, Nano-Wrinkling of Diamond-Like Carbon Thin Films on Amorphous Polycarbonate and Semicrystalline Polyethylene Terephthalate, AIP Conf. Proc., 2015, 1653, p 02006410.1063/1.4914255 ↗
64. M. Folea, A. Roman, and N.-B. Lupulescu, An Overview of DLC Coatings on Cutting Tools Performance, Acad. J. Manuf. Eng., 2010, 8(3), p 30–36
65. L. Huang, J. Yuan, C. Li et al., Microstructure, Tribological and Cutting Performance of Ti-DLC/α-C: H Multilayer Film on Cemented Carbide, Surf. Coat. Technol., 2018, 353, p 163–17010.1016/j.surfcoat.2018.08.076 ↗
66. T. Horiuchi, K. Yoshida, T. Okuda, M. Kano, M. Kumagai, and T. Suzuki, Session 01: DLC Coatings OA 01 P2009-245 Evaluation of Adhesion Strength and Wear Resistance of DLC Films, Surf. Coat. Technol., 2010, 205, p 188–19510.1016/j.surfcoat.2010.07.068 ↗
67. O. Prat, J. Garcia, D. Rojas et al., The Role of Laves Phase on Microstructure Evolution and Creep Strength of novel 9% Cr Heat Resistant Steels, Intermetallics, 2013, 32, p 362–37210.1016/j.intermet.2012.08.016 ↗
68. J. Garcia, R. Pitonak, The Role of Cemented Carbide Functionally Graded Outer-Layers on the Wear Performance of Coated Cutting Tools, Int. J. Refract. Met. Hard Mater., 2013, 36, p 52–5910.1016/j.ijrmhm.2011.12.007 ↗
69. I. El Azhari, J. Garcia, M. Zamanzade et al., Investigations on Micro-Mechanical Properties of Polycrystalline Ti(C, N) and Zr(C, N) Coatings, Acta Mater., 2018, 49, p 364–37610.1016/j.actamat.2018.02.053 ↗
70. S. Norgren, J. Garcia, A. Blomqvist et al., Trends in the P/M Hard Metal Industry, Int. J. Refract. Met. Hard Mater., 2015, 48, p 31–4510.1016/j.ijrmhm.2014.07.007 ↗
71. C.J.R. Gonzalez Oliver, B.A. Alvarez, and J.L. Garcia, Kinetics of Densification and Grain Growth in Ultrafine WC-Co Composites, Int. J. Refract. Met. Hard Mater., 2016, 59, p 121–13110.1016/j.ijrmhm.2016.05.016 ↗