Effects of Mn Additions on the Structure, Mechanical Properties, and Corrosion Behavior of Cu-Al-Ni Shape Memory Alloys
Source abstract
Abstract
The influences of different amount (0.4, 0.7, and 1 wt.%) of Mn addition on the structure, mechanical properties, and corrosion behavior of Cu-Al-Ni shape memory alloys have been studied using differential scanning calorimetry, field emission scanning electron microscopy, transmission electron microscopy, x-ray diffraction, tensile test, shape memory effect test, hardness test, and electrochemical test. It was observed that the transformation temperatures, microstructural characteristics, and mechanical properties are highly sensitive to the composition variations. The obtained results show that the transformation temperatures and mechanical properties of Cu-Al-Ni SMAs exhibited the best results with 0.7 wt.% of Mn addition. These kinds of enhancements are mainly due to the type, amount, and morphology of the martensite phase, including the grain refinement. The result of electrochemical test showed that an increment in Mn content up to 0.7 wt.% improved the corrosion resistance of Cu-Al-Ni SMA. However, further increase of Mn content decreases the corrosion resistance of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. O. Benafan, A. Garg, R.D. Noebe, G.S. Bigelow, S.A. Padula Ii, D.J. Gaydosh, N. Schell, J.H. Mabe, and R. Vaidyanathan, Mechanical and Functional Behavior of a Ni-rich Ni50.3Ti29.7Hf20 High Temperature Shape Memory Alloy, Intermetallics, 2014, 50, p 94–10710.1016/j.intermet.2014.02.006 ↗
2. A. Ibarra, J.S. Juan, E.H. Bocanegra, and M.L. Nó, Thermo-mechanical Characterization of Cu-Al-Ni Shape Memory Alloys Elaborated by Powder Metallurgy, Mater. Sci. Eng. A, 2006, 438–440, p 782–78610.1016/j.msea.2005.12.053 ↗
3. I.H.V. Recarte, J. Herreros, M.L. Nb, and J. San Juan, Precipitation of the Stable Phases in Cu-Al-Ni Shape Memory Alloys, Scripta Mater., 1996, 34, p 255–26010.1016/1359-6462(95)00493-9 ↗
4. R.B. Pérez-Sáez, V. Recarte, E.H. Bocanegra, M.L. No, and J. San Juan, Dependence of the Martensitic Transformation Characteristics on Concentration in Cu-Al-Ni Shape Memory Alloys, Mater. Sci. Eng. A, 1999, 273–275, p 380–384
5. V. Recarte, J.I. Pérez-Landazábal, M.L. Nó, and J. San Juan, Study by Resonant Ultrasound Spectroscopy of the Elastic Constants of the β Phase in Cu-Al-Ni Shape Memory Alloys, Mater. Sci. Eng. A, 2004, 370, p 488–49110.1016/j.msea.2003.06.004 ↗
6. J. Font, E. Cesari, J. Muntasell, and J. Pons, Thermomechanical Cycling in Cu-Al-Ni-Based Melt-Spun Shape-Memory Ribbons, Mater. Sci. Eng. A, 2003, 354, p 207–21110.1016/S0921-5093(03)00003-0 ↗
7. J.I. Pérez-Landazábal, V. Recarte, V. Sánchez-Alarcos, M.L. Nó, and J.S. Juan, Study of the Stability and Decomposition Process of the β Phase in Cu-Al-Ni Shape Memory Alloys, Mater. Sci. Eng. A, 2006, 438–440, p 734–73710.1016/j.msea.2005.12.066 ↗
8. T. Saburi and C.M. Wayman, Crystallographic Similarities in Shape Memory Martensites, Acta Metall., 1979, 27, p 979–99510.1016/0001-6160(79)90186-X ↗
9. J.I. Pérez-Landazábal, V. Recarte, M.L. Nó, and J. San Juan, Determination of the Order in γ1 Intermetallic Phase in Cu-Al-Ni Shape Memory Alloys, Intermetallics, 2003, 11, p 927–93010.1016/S0966-9795(03)00121-3 ↗
10. U. Sarı and İ. Aksoy, Electron Microscopy Study of 2H and 18R Martensites in Cu-11.92 wt.% Al-3.78 wt.% Ni Shape Memory Alloy, J. Alloy. Compd., 2006, 417, p 138–14210.1016/j.jallcom.2005.09.049 ↗
11. H.S.S. Sugimoto, T. Hara, and H. Tsuchiya, The Effect of Grain Constraint, Heat Treatment and Compositional Change on the Behavior of Martensitic Transformations in Alloys with the Composition Near Cu-13Al-4Ni-1Zn (mass%), J. Phys. IV, 1995, 5, p 925
12. V. Recarte, R.B. Pérez-Sáez, J. SanJuan, E.H. Bocanegra, and M.L. Nó, Influence of Al and Ni Concentration on the Martensitic Transformation in Cu-Al-Ni Shape-Memory Alloys, Metall. Mater. Trans. A, 2002, 33, p 2581–259110.1007/s11661-002-0379-8 ↗
13. H.Y. Peng, Z.G. Wei, D.Z. Yang, C.Y. Chung, and J.K.L. Lai, Reverse Transformations in CuA1NiMnTi Alloy at Elevated Temperatures, Acta Mater., 1996, 44, p 1189–119910.1016/1359-6454(95)00233-2 ↗
14. M.A. Morris, Microstructural Influence on Ductility and Shape Memory Effect of Some Modified Cu-Ni-Ai Alloys, Scripta Metall., 1991, 25, p 1409–141410.1016/0956-716X(91)90424-Y ↗
15. M.A. Morris and S. Gunter, Effect of Heat Treatment and Thermal Cycling on Transformation Temperatures of Ductile Cu-Al-Ni-Mn-B Alloys, Scripta Metall. Mater., 1992, 26(11), p 1663–166810.1016/0956-716X(92)90530-R ↗
16. M.A. Morris and T. Lipe, Microstructural Influence of Mn Additions on Thermoelastic and Pseudoelastic Properties of Cu-Al-Ni Alloys, Acta Metall. Mater., 1994, 42, p 1583–159410.1016/0956-7151(94)90368-9 ↗
17. U. Sarı and T. Kırındı, Effects of Deformation on Microstructure and Mechanical Properties of a Cu-Al-Ni Shape Memory Alloy, Mater. Charact., 2008, 59, p 920–92910.1016/j.matchar.2007.07.017 ↗
18. J. Rodríguez-Aseguinolaza, I. Ruiz-Larrea, M.L. Nó, A. López-Echarri, E.H. Bocanegra, and J. San Juan, Thermal History Effects of Cu-Al-Ni Shape Memory Alloys Powder Particles Compared with Single Crystals Behaviour, Intermetallics, 2010, 18, p 2183–219010.1016/j.intermet.2010.07.002 ↗
19. Y. Sutou, T. Omori, K. Yamauchi, N. Ono, R. Kainuma, and K. Ishida, Effect of Grain Size and Texture on Pseudoelasticity in Cu-Al-Mn-Based Shape Memory Wire, Acta Mater., 2005, 53, p 4121–413310.1016/j.actamat.2005.05.013 ↗
20. K. Adachi, K. Shoji, and Y. Hamada, Formation of (X) Phases and Origin of Grain Refinement Effect in Cu-Al-Ni Shape Memory Alloys Added with Titanium, ISIJ Int., 1989, 29, p 378–38710.2355/isijinternational.29.378 ↗
21. U. Sari, Influences of 2.5 wt.% Mn Addition on the Microstructure and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys, Int. J. Miner. Metall. Mater., 2010, 17, p 192–19810.1007/s12613-010-0212-0 ↗
22. S.H. Chang, Influence of Chemical Composition on the Damping Characteristics of Cu-Al-Ni Shape Memory Alloys, Mater. Chem. Phys., 2011, 125, p 358–36310.1016/j.matchemphys.2010.09.077 ↗
23. A. Sudholz, K. Gusieva, X. Chen, B. Muddle, M. Gibson, and N. Birbilis, Electrochemical Behaviour and Corrosion of Mg-Y Alloys, Corros. Sci., 2011, 53, p 2277–228210.1016/j.corsci.2011.03.010 ↗
24. C. Tatar, Gamma Irradiation-Induced Evolution of the Transformation Temperatures and Thermodynamic Parameters in a CuZnAl Shape Memory Alloy, Thermochim. Acta, 2005, 437, p 121–12510.1016/j.tca.2005.06.030 ↗
25. J. Ortín and A. Planes, Thermodynamics of Thermoelastic Martensitic Transformations, Acta Metall., 1989, 37, p 1433–144110.1016/0001-6160(89)90175-2 ↗
26. H. Funakubo, Shape Memory Alloys, CRC Press LLC, Boca Raton, 1987
27. J.B.Q. Xuan and T.Y. Hsu, The Effect of Martensite Ordering on Shape Memory Effect in a Copper-Zinc-Aluminium Alloy, Mater. Sci. Eng, 1987, 93, p 205–21110.1016/0025-5416(87)90425-3 ↗
28. R.J. Salzbrenner and M. Cohen, On the Thermodynamics of Thermoelastic Martensitic Transformations, Acta Metall., 1979, 27, p 739–74810.1016/0001-6160(79)90107-X ↗
29. O. Adigüzel, Martensite Ordering and Stabilization in Copper Based Shape Memory Alloys, Mater. Res. Bull., 1995, 30, p 755–76010.1016/0025-5408(95)00053-4 ↗
30. V. Sampath, Studies on the Effect of Grain Refinement and Thermal Processing on Shape Memory Characteristics of Cu-Al-Ni Alloys, Smart Mater. Struct., 2005, 14, p S253–S26010.1088/0964-1726/14/5/013 ↗
31. Ş.N. Balo and N. Sel, Effects of Thermal Aging on Transformation Temperatures and Some Physical Parameters of Cu-13.5wt.%Al-4wt.%Ni Shape Memory Alloy, Thermochim. Acta, 2012, 536, p 1–510.1016/j.tca.2012.02.007 ↗
32. G.-S. Yang, J.-K. Lee, and W.-Y. Jang, Effect of Grain Refinement on Phase Transformation Behavior and Mechanical Properties of Cu-Based Alloy, Trans. Nonferrous Met. Soc. China, 2009, 19, p 979–98310.1016/S1003-6326(08)60390-8 ↗
33. A. Aydogdu, Y. Aydogdu, and O. Adiguzel, Long-Term Ageing Behaviour of Martensite in Shape Memory Cu-Al-Ni Alloys, J. Mater. Process. Technol., 2004, 153–154, p 164–16910.1016/j.jmatprotec.2004.04.198 ↗
34. B.D. Cullity and S.R. Stock, Elements of x-ray diffraction, Prentice Hall, Upper Saddle River, 2001
35. A.L. Patterson, The Scherrer Formula for x-ray Particle Size Determination, Phys. Rev., 1939, 56, p 978–98210.1103/PhysRev.56.978 ↗
36. U.S. Mallik and V. Sampath, Influence of Aluminum and Manganese Concentration on the Shape Memory Characteristics of Cu-Al-Mn Shape Memory Alloys, J. Alloy. Compd., 2008, 459, p 142–14710.1016/j.jallcom.2007.04.254 ↗
37. M. Pisarek, P. Kędzierzawski, T. Płociński, M. Janik-Czachor, and K.J. Kurzydłowski, Characterization of the Effects of Hydrostatic Extrusion on Grain Size, Surface Composition and the Corrosion Resistance of Austenitic Stainless Steels, Mater. Charact., 2008, 59, p 1292–130010.1016/j.matchar.2007.11.002 ↗
38. W.R. Osório, A. Cremasco, P.N. Andrade, A. Garcia, and R. Caram, Electrochemical Behavior of Centrifuged Cast and Heat Treated Ti-Cu Alloys for Medical Applications, Electrochim. Acta, 2010, 55, p 759–77010.1016/j.electacta.2009.09.016 ↗
39. H. Bakhsheshi-Rad, M. Idris, and M. Abdul-Kadir, Synthesis and In Vitro Degradation Evaluation of the Nano-HA/MgF2 and DCPD/MgF2 Composite Coating on Biodegradable Mg-Ca-Zn Alloy, Surf. Coat. Technol., 2013, 222, p 79–8910.1016/j.surfcoat.2013.02.007 ↗
40. M. Gojić, L. Vrsalović, S. Kožuh, A. Kneissl, I. Anžel, S. Gudić, B. Kosec, and M. Kliškić, Electrochemical and Microstructural Study of Cu-Al-Ni Shape Memory Alloy, J. Alloy. Compd., 2011, 509, p 9782–979010.1016/j.jallcom.2011.07.107 ↗
41. S. Montecinos and S.N. Simison, Influence of the Microstructure on the Corrosion Behaviour of a Shape Memory Cu-Al-Be Alloy in a Marine Environment, Appl. Surf. Sci., 2011, 257, p 2737–274410.1016/j.apsusc.2010.10.054 ↗
42. A. Benedeti, P. Sumodjo, K. Nobe, P. Cabot, and W. Proud, Electrochemical Studies of Copper, Copper-Aluminium and Copper-Aluminium-Silver Alloys: Impedance Results in 0.5 M NaCl, Electrochim. Acta, 1995, 40, p 2657–266810.1016/0013-4686(95)00108-Q ↗