Pure Commercial Titanium Color Anodizing and Corrosion Resistance
Source abstract
Abstract
In order to improve titanium corrosion behavior, we can increase the thickness of oxide layer on titanium surface during anodizing process and by electrochemistry. In this research, self-color anodizing of Ti in sulfuric acid was done, and anodizing layers were created in different colors. The highest value of chromaticity was 37.8 for the anodized sample in 10 V, and the lowest value was 8.6 at 15 V. The oxide layer thickness was calculated by optical method (light refraction). The anodic film thickness increased by increasing the anodizing voltage. The highest thickness of anodic film was 190 nm in sulfuric acid solution for the anodized sample in 80 V. Corrosion resistance of anodized Ti was studied by potentiodynamic polarization curves in biological solution of Ringer’s at 37 °C. On increasing the anodizing voltage further, corrosion rate of the alloy increased from its lowest rate. The lowest rate of corrosion was for the sample anodized in 10 V, which was 0.96 × 10−3 mpy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. M. Kang Kim, G. Chun Jung, M. Vang, and Y. Joon Park, The Effect of Spark Anodizing Treatment of Pure Titanium Metals and Titanium Alloys on Corrosion Characterization, Surf. Coat. Technol., 2007, 201, p 8738–874510.1016/j.surfcoat.2006.11.022 ↗
2. T. Biestek and J. Weber, Electrolytic and Chemical Conversion Coatings, 1st ed., Portcullis Press, 1976, p 225–228
3. R. Narayanan and S.K. Seshadri, Phosphoric Acid Anodization of Ti-6Al-4V-Structural and Corrosion Aspects, Corros. Sci., 2007, 49, p 542–55810.1016/j.corsci.2006.06.021 ↗
4. M. Pisarek, K. Rożniatowski, M.G. Dahlke, M.J. Czachor, and K.J. Kurzydłowski, Nanoscale Characterization of Anodic Oxide Films on Ti-6Al-4V Alloy, Thin Solid Films, 2007, 515, p 6460–646410.1016/j.tsf.2006.11.074 ↗
5. D.D. Macdonald and M.U. Macdonald, Theory of Steady State Passive Films, J. Electrochem. Soc., 1990, 137(8), p 2395–240310.1149/1.2086949 ↗
6. A.K. Sharma, Anodizing Titanium for Space Application, Thin Solid Films, 1992, 208, p 48–5410.1016/0040-6090(92)90946-9 ↗
7. J.L. Delplancke, M. Degrez, and A. Fontana, Self-Colour Anodizing of Titanium, Surf. Technol., 1982, 16, p 153–16210.1016/0376-4583(82)90033-4 ↗
8. P. Mast, E. Stijns, and H. Terryn, Colour Properties of Barrier Anodic Oxide Films on Aluminium and Titanium Studied with Total Reflectance and Spectroscopic Ellipsometry, Surf. Coat. Technol., 2004, 185, p 303–31010.1016/j.surfcoat.2004.01.021 ↗
9. A. Perez Del Pino, J.M. Fernandez-Pradas, P. Serra, and J.L. Morenza, Coloring of Titanium Through Laser Oxidation: Comparative Study with Anodizing, Surf. Coat. Technol., 2004, 187, p 106–11210.1016/j.surfcoat.2004.02.001 ↗
10. Y. Ohno, CIE Fundamental for Color Measurements, Optical Technology Division, National Institute of Standards Technology, Gaithersburg, MD, 2000
11. Y.T. Sul, C.B. Johansson, Y. Jeong, and T. Albrektsson, The Electrochemical Oxide Growth Behavior on Titanium in Acid and Alkaline Electrolytes, Med. Eng. Phys., 2001, 23, p 329–34610.1016/S1350-4533(01)00050-9 ↗
12. E. Verne, E. Bona, E. Angelini, F. Rosalbino, and P. Appendino, Correlation Between Microstructure and Properties of Biocomposite Coating, J. Eur. Ceram. Soc., 2002, 22, p 2315–232310.1016/S0955-2219(02)00030-4 ↗
13. R. Tilley, Colour and the Optical Properties of Materials, John Wiley, Chichester, UK, 2000
14. H.J. Oh, Microstructural Characterization of Biomedical Titanium Oxide Film Fabricated by Electrochemical Method, Surf. Coat. Technol., 2004, 198, p 247–25210.1016/j.surfcoat.2004.10.029 ↗