DataVXJournal of Materials Engineering and PerformancePaper
journal article·2022-08

The State of the Art for Wire Arc Additive Manufacturing Process of Titanium Alloys for Aerospace Applications

Dipayan Chakraborty, Tumula Tirumala, Srihari Chitral, B. N. Sahoo, D. V. Kiran, P. Ajay Kumar

Journal of Materials Engineering and Performance· Volume 31· Issue 8
Publisher page
Source abstract

Abstract

Aerospace industries invest a significant amount of resources to meet one common goal, that is, to make the aircraft fly. To keep down its ‘buy-to-fly’ ratio, researchers have been working hard to introduce additive manufacturing (AM) technique for producing aerospace components. AM technologies are also now being used in major parts of an aircraft like fuel nozzles, turbofan blades, compressor-turbine blades, suspension wishbone, air ducts, etc., due to its just in time production with less complexity, direct tooling, and higher customer satisfaction with significant cost reduction including interior design. Nowadays, aerospace industries face problems meeting the deadline for delivering the aircraft components and replacement parts while maintaining certification standards. The wire arc additive manufacturing (WAAM) technique, one of the AM processes, can fabricate large metallic components with some reduction in lead time. WAAM process can build near net shape parts with high material deposition rate and efficiency while keeping the equipment and feedstock cost and material wastage minimal. This review paper summarizes the latest advancement on wire arc additive manufacturing of titanium and its alloy based on the aerospace application. Titanium and its alloys are used at a large scale in aircraft airframe structures and engine parts due to its high strength-to-weight ratio, excellent corrosion-resistant, high creep and fatigue resistance at an elevated temperature. It has been studied that the mechanical and metallographic properties of titanium and its alloy can be enhanced by using the WAAM process, and it is suited for aerospace applications. The paper will review the challenges like porosity, delamination, residual stress, crack propagation, anisotropic behavior, oxidation, etc., associated with the WAAM process on titanium alloys and propose recommendations for reducing the defects during the WAAM process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

Metals & alloysMaterials processing

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. W. E. Frazier, “Metal additive manufacturing: A review,” Journal of Materials Engineering and Performance, vol. 23, no. 6. Springer New York LLC, pp. 1917–1928, 2014. doi: https://doi.org/10.1007/s11665-014-0958-z.10.1007/s11665-014-0958-z ↗
2. A. Suárez, E. Aldalur, F. Veiga, T. Artaza, I. Tabernero and A. Lamikiz, Wire Arc Additive Manufacturing of an Aeronautic Fitting with Different Metal Alloys: From the Design to the Part, J. Manuf. Process., 2021, 64, p 188–197. https://doi.org/10.1016/j.jmapro.2021.01.01210.1016/j.jmapro.2021.01.012 ↗
3. L.P. Raut and R. v. Taiwade, Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions, J. Mater. Eng. Perform., 2021, 30(7), p 4768–4791. https://doi.org/10.1007/s11665-021-05871-510.1007/s11665-021-05871-5 ↗
4. C. Cunningham, J. Flynn, A. Shokrani, V. Dhokia,and S. Newman, Invited Review Article: Strategies and Processes for High Quality Wire Arc Additive Manufacturing, Addit. Manuf., 2018, 22, p 672–686. https://doi.org/10.1016/j.addma.2018.06.02010.1016/j.addma.2018.06.020 ↗
5. B. Wu et al., A Review of the Wire Arc Additive Manufacturing of Metals: Properties, Defects and Quality Improvement, J. Manuf. Process., 2018, 35, p 127–139. https://doi.org/10.1016/j.jmapro.2018.08.00110.1016/j.jmapro.2018.08.001 ↗
6. T. Rodrigues, V. Duarte, R. Miranda, T. Santos,and J. Oliveira, Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM), Materials, 2019, 12(7), p 1121. https://doi.org/10.3390/ma1207112110.3390/ma12071121 ↗
7. I. Gibson, D. Rosen,and B. Stucker, Additive manufacturing technologies, Springer Verlag, New York, NY, 2016.
8. S. Williams, F. Martina, A. Addison, J. Ding, G. Pardal,and P. Colegrove, Wire + Arc Additive Manufacturing, Mater. Sci. Technol., 2016, 32(7), p 641–647. https://doi.org/10.1179/1743284715y.000000007310.1179/1743284715y.0000000073 ↗
9. D. Ding, Z. Pan, D. Cuiuri,and H. Li, A Tool-Path Generation Strategy for Wire and Arc Additive Manufacturing, Int. J. Adv. Manuf. Technol., 2014, 73(1–4), p 173–183. https://doi.org/10.1007/s00170-014-5808-510.1007/s00170-014-5808-5 ↗
10. F. Wang, S. Williams,and M. Rush, Morphology Investigation on Direct Current Pulsed Gas Tungsten Arc Welded Additive Layer Manufactured Ti6Al4V Alloy, Int. J. Adv. Manuf. Technol., 2011, 57(5–8), p 597–603. https://doi.org/10.1007/s00170-011-3299-110.1007/s00170-011-3299-1 ↗
11. P. Kazanas, P. Deherkar, P. Almeida, H. Lockett,and S. Williams, Fabrication of Geometrical Features Using Wire and Arc Additive Manufacture, Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf., 2012, 226(6), p 1042–1051. https://doi.org/10.1177/095440541243712610.1177/0954405412437126 ↗
12. K. Karunakaran, S. Suryakumar, V. Pushpa,and S. Akula, Low Cost Integration of Additive and Subtractive Processes for Hybrid Layered Manufacturing, Robot. Comput. Integrated Manuf., 2010, 26(5), p 490–499. https://doi.org/10.1016/j.rcim.2010.03.00810.1016/j.rcim.2010.03.008 ↗
13. X. Xu et al., Improving Mechanical Properties of Wire Plus Arc Additively Manufactured Maraging Steel Through Plastic Deformation Enhanced Aging Response, Mater. Sci. Eng., A, 2019, 747, p 111–118. https://doi.org/10.1016/j.msea.2018.12.11410.1016/j.msea.2018.12.114 ↗
14. C. Shen, Z. Pan, D. Cuiuri, J. Roberts,and H. Li, Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process, Metall. and Mater. Trans. B., 2015, 47(1), p 763–772. https://doi.org/10.1007/s11663-015-0509-510.1007/s11663-015-0509-5 ↗
15. T. Abe and H. Sasahara, Dissimilar Metal Deposition with a Stainless Steel and Nickel-Based Alloy Using Wire and Arc-Based Additive Manufacturing, Precis. Eng., 2016, 45, p 387–395. https://doi.org/10.1016/j.precisioneng.2016.03.01610.1016/j.precisioneng.2016.03.016 ↗
16. J. Xiong, Y. Li, R. Li,and Z. Yin, Influences of Process Parameters on Surface Roughness of Multi-Layer Single-Pass Thin-Walled Parts in GMAW-Based Additive Manufacturing, J. Mater. Process. Technol., 2018, 252, p 128–136. https://doi.org/10.1016/j.jmatprotec.2017.09.02010.1016/j.jmatprotec.2017.09.020 ↗
17. M. Dinovitzer, X. Chen, J. Laliberte, X. Huang,and H. Frei, Effect of Wire and Arc Additive Manufacturing (WAAM) Process Parameters on Bead Geometry and Microstructure, Addit. Manuf., 2019, 26, p 138–146. https://doi.org/10.1016/j.addma.2018.12.01310.1016/j.addma.2018.12.013 ↗
18. W. Aiyiti, W. Zhao, B. Lu,and Y. Tang, Investigation of the Overlapping Parameters of MPAW-Based Rapid Prototyping, Rapid Prototyping Journal, 2006, 12(3), p 165–172. https://doi.org/10.1108/1355254061067074410.1108/13552540610670744 ↗
19. P. M. Sequeira Almeida,and S. Williams, “Innovative process model of Ti-6Al-4V additive layer manufacturing using cold metal transfer (CMT),” 21st Annu. Int. Solid Free. Fabr. Symp. - An Addit. Manuf. Conf. SFF 2010, pp. 25–36, 2010.
20. P. Shukla, B. Dash, D. Kiran,and S. Bukkapatnam, Arc Behavior in Wire Arc Additive Manufacturing Process, Procedia Manuf., 2020, 48, p 725–729. https://doi.org/10.1016/j.promfg.2020.05.10510.1016/j.promfg.2020.05.105 ↗
21. Z. Pan, D. Ding, B. Wu, D. Cuiuri, H. Li,and J. Norrish, Arc Welding Processes for Additive Manufacturing: A Review, Transac. Intell. Weld Manuf., 2017 https://doi.org/10.1007/978-981-10-5355-9_110.1007/978-981-10-5355-9_1 ↗
22. M. Somashekara and S. Suryakumar, Studies on Dissimilar Twin-Wire Weld-Deposition for Additive Manufacturing Applications, Trans. Indian Inst. Met., 2017, 70(8), p 2123–2135. https://doi.org/10.1007/s12666-016-1032-310.1007/s12666-016-1032-3 ↗
23. F. Martina, J. Ding, S. Williams, A. Caballero, G. Pardal,and L. Quintino, Tandem Metal Inert Gas Process for High Productivity Wire Arc Additive Manufacturing in Stainless Steel, Addit. Manuf., 2019, 25, p 545–550. https://doi.org/10.1016/j.addma.2018.11.02210.1016/j.addma.2018.11.022 ↗
24. J. Ding, P. Colegrove, J. Mehnen, S. Ganguly, P.S. Almeida, F. Wang,and S. Williams, Thermo-Mechanical Analysis of Wire and Arc Additive Layer Manufacturing Process on Large Multi-Layer Parts, Comput. Mater. Sci., 2011 https://doi.org/10.1016/j.commatsci.2011.06.02310.1016/j.commatsci.2011.06.023 ↗
25. “http://mechanicalinventions.blogspot.com/2012/11/gas-metal-arc-welding-gmaw-or-mig.html.”
26. “https://upload.wikimedia.org/wikipedia/commons/a/ac/GTAW.svg.”
27. D. Ding, Z. Pan, D. Cuiuri,and H. Li, Wire-Feed Additive Manufacturing of Metal Components: Technologies, Developments and Future Interests, Int J Adv Manuf Technol, 2015, 81(1–4), p 465–481. https://doi.org/10.1007/s00170-015-7077-310.1007/s00170-015-7077-3 ↗
28. N. Shamsaei, A. Yadollahi, L. Bian,and S. Thompson, An overview of Direct Laser Deposition for Additive Manufacturing; Part II: Mechanical Behavior, Process Parameter Optimization and Control, Addit. Manuf., 2015, 8, p 12–35. https://doi.org/10.1016/j.addma.2015.07.00210.1016/j.addma.2015.07.002 ↗
29. D. Ding, Z. Pan, D. Cuiuri,and H. Li, A Practical Path Planning Methodology for Wire and Arc Additive Manufacturing of Thin-Walled Structures, Robot. Comput. Integr. Manuf., 2015, 34, p 8–19. https://doi.org/10.1016/j.rcim.2015.01.00310.1016/j.rcim.2015.01.003 ↗
30. D. Ding, Z. Pan, D. Cuiuri, H. Li,and N. Larkin, Adaptive path Planning for Wire-Feed Additive Manufacturing Using Medial Axis Transformation, J. Clean. Prod., 2016, 133, p 942–952. https://doi.org/10.1016/j.jclepro.2016.06.03610.1016/j.jclepro.2016.06.036 ↗
31. F. Michel, H. Lockett, J. Ding, F. Martina, G. Marinelli,and S. Williams, A Modular Path Planning Solution for Wire + Arc Additive Manufacturing, Robot. Comput. Integr. Manuf., 2019, 60, p 1–11. https://doi.org/10.1016/j.rcim.2019.05.00910.1016/j.rcim.2019.05.009 ↗
32. H. Geng, J. Xiong, D. Huang, X. Lin,and J. Li, A Prediction Model of Layer Geometrical Size in Wire and Arc Additive Manufacture Using Response Surface Methodology, Int. J. Adv. Manuf. Technol., 2015, 93(1–4), p 175–186. https://doi.org/10.1007/s00170-015-8147-210.1007/s00170-015-8147-2 ↗
33. D. Ding, Z. Pan, D. Cuiuri, H. Li, S. van Duin,and N. Larkin, Bead Modelling and Implementation of Adaptive MAT Path in Wire and Arc Additive Manufacturing, Robot. Comput. Integr. Manuf., 2016, 39, p 32–42. https://doi.org/10.1016/j.rcim.2015.12.00410.1016/j.rcim.2015.12.004 ↗
34. B. Panda, K. Shankhwar, A. Garg,and M. Savalani, Evaluation of Genetic Programming-Based Models for Simulating Bead Dimensions in Wire and Arc Additive Manufacturing, J. Intell. Manuf., 2016, 30(2), p 809–820. https://doi.org/10.1007/s10845-016-1282-210.1007/s10845-016-1282-2 ↗
35. D. Ding, Z. Pan, D. Cuiuri,and H. Li, A Multi-Bead Overlapping Model for Robotic Wire and Arc Additive Manufacturing (WAAM), Robot. Comput. Integr. Manuf., 2015, 31, p 101–110. https://doi.org/10.1016/j.rcim.2014.08.00810.1016/j.rcim.2014.08.008 ↗
36. T. T. Y. S. N. A. Ikuhiro INAGAKI, “Application and Features of Titanium for the Aerospace Industry,” 2014.
37. J.C. Williams and R.R. Boyer, Opportunities and Issues in the Application of Titanium Alloys for Aerospace Components, Metals, 2020 https://doi.org/10.3390/met1006070510.3390/met10060705 ↗
38. T. Altan, F. Boulger, J. Becker, N. Akgerman, H. Henning, and G. Kuhlman, 1976 “Forging of Titanium Alloys,” The Electrochemical Society,.
39. K. S. M. S. Mahadzir. I. B. A. K. Yassin Mustafa Ahmed, 2012 “Current Status of Titanium Applications for Air-craft 2.1 Titanium for airframes Starting with fabric,”.
40. Vinicius A.R. Henriquies, 2009 “Titanium Production for Aerospace Applications,” Journal of Aerospace Technology and Management.10.5028/jatm.2009.01010717 ↗
41. D. Banerjee and J.C. Williams, Perspectives on Titanium Science and Technology, Acta Mater., 2013, 61(3), p 844–879. https://doi.org/10.1016/j.actamat.2012.10.04310.1016/j.actamat.2012.10.043 ↗
42. M.T. Jia, D.L. Zhang, B. Gabbitas, J.M. Liang,and C. Kong, A Novel Ti-6Al-4V Alloy Microstructure with Very High Strength and Good Ductility, Scripta Mater., 2015, 107, p 10–13. https://doi.org/10.1016/j.scriptamat.2015.05.00810.1016/j.scriptamat.2015.05.008 ↗
43. P. Kumar, O. Prakash,and U. Ramamurty, Micro-and Meso-Structures and their Influence on Mechanical Properties of Selectively Laser Melted Ti-6Al-4V, Acta Mater., 2018, 154, p 246–260. https://doi.org/10.1016/j.actamat.2018.05.04410.1016/j.actamat.2018.05.044 ↗
44. B.G. Yuan, C.F. Li, H.P. Yu,and D.L. Sun, Influence of Hydrogen Content on Tensile and Compressive Properties of Ti-6Al-4V Alloy at Room Temperature, Mater. Sci. Eng., A, 2010, 527(16–17), p 4185–4190. https://doi.org/10.1016/j.msea.2010.03.05210.1016/j.msea.2010.03.052 ↗
45. C. (Christoph) Leyens and M. (Manfred) Peters, 2003 Titanium and titanium alloys: fundamentals and applications. Wiley-VCH.
46. Z. Liu, B. He, T. Lyu,and Y. Zou, A Review on Additive Manufacturing of Titanium Alloys for Aerospace Applications: Directed Energy Deposition and Beyond Ti-6Al-4V, JOM, 2021, 73(6), p 1804–1818. https://doi.org/10.1007/s11837-021-04670-610.1007/s11837-021-04670-6 ↗
47. R.P. Kolli and A. Devaraj, A Review of Metastable Beta Titanium Alloys, Metals, 2018 https://doi.org/10.3390/met807050610.3390/met8070506 ↗
48. Y. Cao et al., Mechanical Response of Titanium Tri-Aluminide Intermetallic Alloy, Mater. Sci. Eng., A, 2017, 706, p 242–248. https://doi.org/10.1016/j.msea.2017.09.01510.1016/j.msea.2017.09.015 ↗
49. S.A. Raji, A.P.I. Popoola, S.L. Pityana,and O.M. Popoola, Characteristic Effects of Alloying Elements on β Solidifying Titanium Aluminides: A Review, Heliyon, 2020 https://doi.org/10.1016/j.heliyon.2020.e0446310.1016/j.heliyon.2020.e04463 ↗
50. J. C. Chesnutt, 1992 “Titanium Aluminides for Aerospace Applications”.10.7449/1992/Superalloys_1992_381_389 ↗
51. T.C. Dzogbewu,and W.B. du Preez, Additive Manufacturing of Ti-Based Intermetallic Alloys: A Review and Conceptualization of a Next-Generation Machine, Materials, 2021, 14(15), p 4317. https://doi.org/10.3390/ma1415431710.3390/ma14154317 ↗
52. D. Wimler et al., Designing Advanced Intermetallic Titanium Aluminide Alloys for Additive Manufacturing, Intermetallics, 2021 https://doi.org/10.1016/j.intermet.2021.10710910.1016/j.intermet.2021.107109 ↗
53. P. Singh, H. Pungotra, and N. S. Kalsi, 2017 “On the characteristics of titanium alloys for the aircraft applications”.10.1016/j.matpr.2017.07.249 ↗
54. “http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=NTIME1023.”
55. “https://www.azom.com/article.aspx?ArticleID=9391.”
56. J.C. Fanning, Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6Fe), J. Mater. Eng. Perform., 2005, 14(6), p 788–791. https://doi.org/10.1361/105994905X7562810.1361/105994905X75628 ↗
57. S.K. Kar, S. Suman, S. Shivaprasad, A. Chaudhuri,and A. Bhattacharjee, Processing-Microstructure-Yield Strength Correlation in a Near β Ti Alloy, Ti-5Al-5Mo-5V-3Cr, Mater. Sci. Eng., A, 2014, 610, p 171–180. https://doi.org/10.1016/j.msea.2014.04.11310.1016/j.msea.2014.04.113 ↗
58. C. Ran, Z. Sheng, P. Chen, W. Zhang,and Q. Chen, Effect of Microstructure on the Mechanical Properties of Ti–5Al–5Mo–5V–1Cr–1Fe Alloy, Mater. Sci. Eng. A, 2020 https://doi.org/10.1016/j.msea.2019.13872810.1016/j.msea.2019.138728 ↗
59. R. K. Gupta and B. Pant, 2018 “Titanium aluminides,” in Intermetallic Matrix Composites, https://doi.org/10.1016/b978-0-85709-346-2.00004-210.1016/b978-0-85709-346-2.00004-2 ↗
60. M.O. Bodunrin, L.H. Chown,and J.A. Omotoyinbo, Development of Low-Cost Titanium Alloys: A Chronicle of Challenges and Opportunities, Mater. Today: Proc., 2021, 38, p 564–569. https://doi.org/10.1016/j.matpr.2020.02.97810.1016/j.matpr.2020.02.978 ↗
61. R. O. Ritchie, B. L. Boyce, J. P. Campbell, O. Roder, A. W. Thompson, and W. W. Milligan, 1999 “Thresholds for high-cycle fatigue in a turbine engine Ti-6Al-4V alloy,”[Online]. Available: www.elsevier.com/locate/ijfatigue10.1016/S0142-1123(99)00024-9 ↗
62. Z. M. Hu and T. A. Dean, “Aspects of forging of titanium alloys and the production of blade forms.”
63. A. Agapovichev, A. Sotov, V. Kokareva, and V. Smelov, 2018 “Possibilities and limitations of titanium alloy additive manufacturing,” in MATEC Web of Conferences, Oct., vol. 224. doi: https://doi.org/10.1051/matecconf/201822401064.10.1051/matecconf/201822401064 ↗
64. P. Vo, M. Jahazi, S. Yue,and P. Bocher, Flow Stress Prediction During Hot Working of Near-α Titanium Alloys, Mater. Sci. Eng., A, 2007, 447(1–2), p 99–110. https://doi.org/10.1016/j.msea.2006.10.03210.1016/j.msea.2006.10.032 ↗
65. H. Attar, S. Ehtemam-Haghighi, D. Kent,and M.S. Dargusch, Recent Developments and Opportunities in Additive Manufacturing of Titanium-Based Matrix Composites: A Review, Int. J. Mach. Tools Manuf., 2018, 133, p 85–102. https://doi.org/10.1016/j.ijmachtools.2018.06.00310.1016/j.ijmachtools.2018.06.003 ↗
66. E. Uhlmann, R. Kersting, T.B. Klein, M.F. Cruz,and A.V. Borille, Additive Manufacturing of Titanium Alloy for Aircraft Components, Procedia CIRP, 2015, 35, p 55–60. https://doi.org/10.1016/j.procir.2015.08.06110.1016/j.procir.2015.08.061 ↗
67. B. Anastasia Kolomiets et al., 2018 “Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals Online Year,” vol. 18,.
68. H. Kissel, Titanium Powder and Additive Manufacturing: The Perfect Match, Met. Powder Rep., 2021 https://doi.org/10.1016/j.mprp.2021.06.00210.1016/j.mprp.2021.06.002 ↗
69. B. Blakey-Milner et al., Metal Additive Manufacturing in Aerospace: A Review, Mater. Des., 2021, 209, p 110008. https://doi.org/10.1016/j.matdes.2021.11000810.1016/j.matdes.2021.110008 ↗
70. B.K. Nagesha, V. Dhinakaran, M. Varsha Shree, K.P. Manoj Kumar,and T. Jagadeesha, A Review on Weldability of Additive Manufactured Titanium Alloys, Mater. Today: Proc., 2020, 33, p 2964–2969. https://doi.org/10.1016/j.matpr.2020.02.89910.1016/j.matpr.2020.02.899 ↗
71. M.J. Bermingham, L. Nicastro, D. Kent, Y. Chen,and M.S. Dargusch, Optimising the Mechanical Properties of Ti-6Al-4V Components Produced by Wire + Arc Additive Manufacturing with Post-Process Heat Treatments, J. Alloy. Compd., 2018, 753, p 247–255. https://doi.org/10.1016/j.jallcom.2018.04.15810.1016/j.jallcom.2018.04.158 ↗
72. D. Baier, A. Bachmann,and M.F. Zaeh, Towards Wire and Arc Additive Manufacturing of High-Quality Parts, Procedia CIRP, 2020, 95, p 54–59. https://doi.org/10.1016/j.procir.2020.01.18010.1016/j.procir.2020.01.180 ↗
73. F. Wang, S. Williams, P. Colegrove,and A.A. Antonysamy, Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V, Metall. Mater. Trans. A, 2013, 44(2), p 968–977. https://doi.org/10.1007/s11661-012-1444-610.1007/s11661-012-1444-6 ↗
74. J. Gou, J. Shen, S. Hu, Y. Tian,and Y. Liang, Microstructure and Mechanical Properties of as-Built and Heat-Treated Ti-6Al-4V Alloy Prepared by Cold Metal Transfer Additive Manufacturing, J. Manuf. Process., 2019, 42, p 41–50. https://doi.org/10.1016/j.jmapro.2019.04.01210.1016/j.jmapro.2019.04.012 ↗
75. Z. Li et al., Characterization of Microstructure and Mechanical Properties of Stellite 6 Part Fabricated by Wire Arc Additive Manufacturing, Metals, 2019, 9(4), p 474. https://doi.org/10.3390/met904047410.3390/met9040474 ↗
76. C. Li, K. Muneharua, S. Takao,and H. Kouji, Fiber Laser-GMA Hybrid Welding of Commercially Pure Titanium, Mater. Des., 2009, 30(1), p 109–114. https://doi.org/10.1016/j.matdes.2008.04.04310.1016/j.matdes.2008.04.043 ↗
77. M.J. Bermingham, J. Thomson-Larkins, D.H. St John,and M.S. Dargusch, Sensitivity of Ti-6Al-4V Components to Oxidation During Out of Chamber Wire + Arc Additive Manufacturing, J. Mater. Process. Technol., 2018, 258, p 29–37. https://doi.org/10.1016/j.jmatprotec.2018.03.01410.1016/j.jmatprotec.2018.03.014 ↗
78. S. Singh, A.N. Jinoop, I.A. Palani, C.P. Paul, K.P. Tomar,and K.G. Prashanth, Microstructure and Mechanical Properties of NiTi-SS Bimetallic Structures Built Using Wire Arc Additive Manufacturing, Mater. Lett., 2021, 303, p 130499. https://doi.org/10.1016/j.matlet.2021.13049910.1016/j.matlet.2021.130499 ↗
79. M.J. Bermingham, D. Kent, B. Pace, J.M. Cairney,and M.S. Dargusch, High Strength Heat-Treatable β-Titanium Alloy for Additive Manufacturing, Mater. Sci. Eng. A, 2020, 791, p 139646. https://doi.org/10.1016/j.msea.2020.13964610.1016/j.msea.2020.139646 ↗
80. L. Wang et al., Fabrication of γ-TiAl Intermetallic Alloy using the Twin-Wire Plasma Arc Additive Manufacturing Process: Microstructure Evolution and Mechanical Properties, Mater. Sci. Eng. A, 2021, 812, p 141056. https://doi.org/10.1016/j.msea.2021.14105610.1016/j.msea.2021.141056 ↗
81. G. Zhang, X. Chen, Y. Cai, L. Lu, Y. Xin, D. Jia, Y. Tian,and J. Han, Microstructure and Mechanical Properties of Ti-3Al-2V Alloy by Dual Wire + Arc Additive Manufacturing, Mater. Lett., 2021 https://doi.org/10.1016/j.matlet.2021.13010910.1016/j.matlet.2021.130109 ↗
82. M. Gäumann, C. Bezençon, P. Canalis,and W. Kurz, Single-Crystal Laser Deposition of superalloys: Processing-Microstructure maps, Acta Mater., 2001, 49, p 1051–1062. https://doi.org/10.1016/S1359-6454(00)00367-010.1016/S1359-6454(00)00367-0 ↗
83. W. Kurz, C. Bezençon,and M. Gäumann, Columnar to Equiaxed Transition in Solidification Processing, Sci. Technol. Adv. Mater., 2001, 2, p 185–191. https://doi.org/10.1016/S1468-6996(01)00047-X10.1016/S1468-6996(01)00047-X ↗
84. C. Bezençon, A. Schnell,and W. Kurz, Epitaxial Deposition of MCrAlY Coatings on a Ni-Base Superalloy by Laser Cladding, Scr. Mater., 2003, 49, p 705–709. https://doi.org/10.1016/S1359-6462(03)00369-510.1016/S1359-6462(03)00369-5 ↗
85. B. Baufeld and O. Van Der Biest, Mechanical Properties of Ti-6Al-4V Specimens Produced by Shaped Metal Deposition, Sci. Technol. Adv. Mater., 2009 https://doi.org/10.1088/1468-6996/10/1/01500810.1088/1468-6996/10/1/015008 ↗
86. B. Baufeld, E. Brandl,and O. Van Der Biest, Wire based Additive Layer Manufacturing: Comparison of Microstructure and Mechanical Properties of Ti-6Al-4V Components Fabricated by Laser-Beam Deposition and Shaped Metal Deposition, J. Mater. Process. Technol., 2011, 211, p 1146–1158. https://doi.org/10.1016/j.jmatprotec.2011.01.01810.1016/j.jmatprotec.2011.01.018 ↗
87. F. Martina, J. Mehnen, S.W. Williams, P. Colegrove,and F. Wang, Investigation of the Benefits of Plasma Deposition for the Additive Layer Manufacture of Ti-6Al-4V, J. Mater. Process. Technol., 2012, 212, p 1377–1386. https://doi.org/10.1016/j.jmatprotec.2012.02.00210.1016/j.jmatprotec.2012.02.002 ↗
88. S. Kelly, Kampe, Evoluzione microstrutturale in Costruzioni Multilayer Ti-6Al-4V Depositate a Laser: Parte II. Modellazione Termica, Metall. Mater. Trans. A., 2004, 35, p 1869–1879. https://doi.org/10.1007/s11661-004-0095-710.1007/s11661-004-0095-7 ↗
89. A.K. Syed et al., Effect of Deposition Strategies on Fatigue Crack Growth Behaviour of Wire + Arc Additive Manufactured Titanium Alloy Ti–6Al–4V, Mater. Sci. Eng. A, 2021 https://doi.org/10.1016/j.msea.2021.1411910.1016/j.msea.2021.14119 ↗
90. Z. Li et al., Reducing Arc Heat Input and Obtaining Equiaxed Grains by Hot-Wire Method During Arc Additive Manufacturing Titanium Alloy, Mater. Sci. Eng., A, 2019, 742, p 287–294. https://doi.org/10.1016/j.msea.2018.11.02210.1016/j.msea.2018.11.022 ↗
91. S.M. Kelly and S.L. Kampe, Microstructural Evolution in Laser-Deposited Multilayer Ti-6Al-4V Builds: Part II. Thermal Modeling, Metall, Mater. Trans. A Phys. Metall. Mater. Sci., 2004, 35, p 1869–1879. https://doi.org/10.1007/s11661-004-0095-710.1007/s11661-004-0095-7 ↗
92. Y. Xie, M. Gao, F. Wang, C. Zhang, K. Hao, H. Wang,and X. Zeng, Anisotropy of Fatigue Crack Growth in Wire Arc Additive Manufactured Ti-6Al-4V, Mater. Sci. Eng. A., 2018, 709, p 265–269. https://doi.org/10.1016/j.msea.2017.10.06410.1016/j.msea.2017.10.064 ↗
93. D. Yuan, S. Shao, C. Guo, F. Jiang,and J. Wang, Grain Refining of Ti-6Al-4V Alloy Fabricated by Laser and Wire Additive Manufacturing Assisted with Ultrasonic Vibration, Ultrasonics Sonochem., 2021 https://doi.org/10.1016/j.ultsonch.2021.10547210.1016/j.ultsonch.2021.105472 ↗
94. F. Martina, P.A. Colegrove, S.W. Williams,and J. Meyer, Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components, Metall. Mater. Trans. A, 2015, 46(12), p 6103–6118. https://doi.org/10.1007/s11661-015-3172-110.1007/s11661-015-3172-1 ↗
95. R. Chen et al., Modification of α-Phase of Wire + Arc Additive Manufactured Ti-6Al-4 V Alloy with Boron Addition, Mater. Characterization, 2020 https://doi.org/10.1016/j.matchar.2020.11061610.1016/j.matchar.2020.110616 ↗
96. A. Ho, H. Zhao, J.W. Fellowes, F. Martina, A.E. Davis,and P.B. Prangnell, On the Origin of Microstructural Banding in Ti-6Al4V Wire-Arc Based High Deposition Rate Additive Manufacturing, Acta Mater., 2019, 166, p 306–323. https://doi.org/10.1016/j.actamat.2018.12.03810.1016/j.actamat.2018.12.038 ↗
97. J. Donoghue, A.A. Antonysamy, F. Martina, P.A. Colegrove, S.W. Williams,and P.B. Prangnell, The Effectiveness of Combining Rolling Deformation with Wire-Arc Additive Manufacture on β-grain Refinement and Texture Modification in Ti-6Al-4V, Mater. Charact., 2016, 114, p 103–114. https://doi.org/10.1016/j.matchar.2016.02.00110.1016/j.matchar.2016.02.001 ↗
98. T. Lu et al., Hot-wire arc additive manufacturing Ti–6.5Al–2Zr–1Mo–1V titanium alloy: Pore characterization, microstructural evolution, and mechanical properties, J. Alloys and Compounds, 2020 https://doi.org/10.1016/j.jallcom.2019.15333410.1016/j.jallcom.2019.153334 ↗
99. B. Wu et al., Effects of Heat Accumulation on the Arc Characteristics and Metal Transfer Behavior in Wire Arc Additive Manufacturing of Ti6Al4V, J. Mater. Process. Technol., 2017, 250, p 304–312. https://doi.org/10.1016/j.jmatprotec.2017.07.03710.1016/j.jmatprotec.2017.07.037 ↗
100. Y. Xie, M. Gao, F. Wang, Q. Li,and X. Zeng, A New Recrystallization at Semi-Coherent Micro-Lamella and its Effect on Tensile Properties of Wire Arc Additive Manufactured Titanium Alloy, Mater. Sci. Eng., A, 2018, 737, p 310–317. https://doi.org/10.1016/j.msea.2018.09.07610.1016/j.msea.2018.09.076 ↗