Additive Manufacturing of Metallic Materials: A Review
Source abstract
Abstract
In this review article, the latest developments of the four most common additive manufacturing methods for metallic materials are reviewed, including powder bed fusion, direct energy deposition, binder jetting, and sheet lamination. In addition to the process principles, the microstructures and mechanical properties of AM-fabricated parts are comprehensively compared and evaluated. Finally, several future research directions are suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. K.V. Wong and A. Hernandez, A Review of Additive Manufacturing, ISRN Mech. Eng., 2012, 2012, p 208760. doi: 10.5402/2012/20876010.5402/2012/208760 ↗
2. S. Ashley, Rapid Prototyping is Coming of Age, Mech. Eng., 1995, 117(7), p 62
3. P. Marks, 3D Printing Takes Off with the World’s First Printed Plane, New Sci., 2011, 211(2823), p 17–1810.1016/S0262-4079(11)61817-4 ↗
4. T. Campbell, C. Williams, O. Ivanova, and B. Garrett, Could 3D Printing Change the World. Technologies, Potential, and Implications of Additive Manufacturing, Atlantic Council, Washington, DC, 2011
5. D. Bak, Rapid Prototyping or Rapid Production? 3D Printing Processes Move Industry Towards the Latter, Assem. Autom., 2003, 23(4), p 340–34510.1108/01445150310501190 ↗
6. P.A. Bartolotta and D.L. Krause, Titanium Aluminide Applications in the High Speed Civil Transport, NASA/TM—1999-209071, 1999
7. T. Wu, S.A. Jahan, P. Kumaar, A. Tovar, H. El-Mounayri, Y. Zhang, J. Zhang, D. Acheson, K. Brand, and R. Nalim, A Framework for Optimizing the Design of Injection Molds with Conformal Cooling for Additive Manufacturing, Proced. Manuf., 2015, 1, p 404–41510.1016/j.promfg.2015.09.049 ↗
8. F2792-12a, A.S.T.M., Standard Terminology for Additive Manufacturing Technologies, ASTM International. West Conshohocken, PA, 2015
9. International, A. Committee F42 on Additive Manufacturing Technologies. 2009 [cited 2017 03/08]
10. C. Ladd, J.H. So, J. Muth, and M.D. Dickey, 3D Printing of Free Standing Liquid Metal Microstructures, Adv. Mater., 2013, 25(36), p 5081–508510.1002/adma.201301400 ↗
11. M. Zenou, A. Sa’ar, and Z. Kotler, Laser Jetting of Femto-Liter Metal Droplets for High Resolution 3D Printed Structures, Sci. Rep., 2015, 5, p 726510.1038/srep17265 ↗
12. C.W. Visser, R. Pohl, C. Sun, G.W. Roemer, B. Huisin ‘t Veld, and D. Lohse, Toward 3D Printing of Pure Metals by Laser-Induced Forward Transfer, Adv. Mater., 2015, 27(27), p 4087–409210.1002/adma.201501058 ↗
13. P.K. Lu, W. Li, and J.J. Lannutti, Density Gradients and the Expansion-Shrinkage Transition During Sintering, Acta Mater., 2004, 52(7), p 2057–206610.1016/j.actamat.2003.12.044 ↗
14. A.T. Procopio and A. Zavaliangos, Simulation of Multi-axial Compaction of Granular Media From Loose to High Relative Densities, J. Mech. Phys. Solids, 2005, 53(7), p 1523–155110.1016/j.jmps.2005.02.007 ↗
15. S.J. Antony, R.O. Momoh, and M.R. Kuh, Micromechanical Modelling of Oval Particulates Subjected to Bi-Axial Compression, Comput. Mater. Sci., 2004, 29(4), p 494–49810.1016/j.commatsci.2003.12.007 ↗
16. L. Liu, Simulation of Microstructural Evolution During Isostatic Compaction of Monosized Spheres, J. Phys. D (Appl. Phys.), 2003, 36(15), p 1881–188910.1088/0022-3727/36/15/320 ↗
17. R.Y. Yang, R.P. Zou, and A.B. Yu, Effect of Material Properties on the Packing of Fine Particles, J. Appl. Phys., 2003, 94(5), p 3025–303410.1063/1.1598638 ↗
18. F. Parhami and R.M. McMeeking, A Network Model for Initial Stage Sintering, Mech. Mater., 1998, 27(2), p 111–12410.1016/S0167-6636(97)00034-3 ↗
19. S. Luding, R. Tykhoniak, and J. Tomas, Anisotropic Material Behavior in Dense, Cohesive-Frictional Powders, Chem. Eng. Technol., 2003, 26(12), p 1229–123210.1002/ceat.200303236 ↗
20. C. Argento and D. Bouvard, Modeling the Effective Thermal Conductivity of Random Packing of Spheres Through Densification, Int. J. Heat Mass Transf., 1996, 39(7), p 1343–135010.1016/0017-9310(95)00257-X ↗
21. C. Thornton, M.T. Ciomocos, and M.J. Adams, Numerical Simulations of Diametrical Compression Tests on Agglomerates, Powder Technol., 2004, 140(3), p 258–26710.1016/j.powtec.2004.01.022 ↗
22. T. Groger, U. Tuzun, and D.M. Heyes, Modelling and Measuring of Cohesion in Wet Granular Materials, Powder Technol., 2003, 133(1–3), p 203–21510.1016/S0032-5910(03)00093-7 ↗
23. Y.C. Zhou, B.H. Xu, A.B. Yu, and P. Zulli, An Experimental and Numerical Study of the Angle of Repose of Coarse Spheres, Powder Technol., 2002, 125(1), p 45–5410.1016/S0032-5910(01)00520-4 ↗
24. G. D’Anna, Mechanical Properties of Granular Media, Including Snow, Investigated by a Low-Frequency Forced Torsion Pendulum, Phys. Rev. E (Stat. Phys. Plasmas Fluids, Relat. Interdiscip. Top.), 2000, 62(1), p 982–992
25. K.V. Wong and A. Hernandez, A Review of Additive Manufacturing, ISRN Mech. Eng., 2012, 2012, p 1010.5402/2012/208760 ↗
26. L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, K.N. Amato, P.W. Shindo, F.R. Medina, and R.B. Wicker, Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies, J. Mater. Sci. Technol., 2012, 28(1), p 1–1410.1016/S1005-0302(12)60016-4 ↗
27. G. Tapia and A. Elwany, A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing, J. Manuf. Sci. Eng., 2014, 136(6), p 060801–060801010.1115/1.4028540 ↗
28. W.E. Frazier, Metal Additive Manufacturing: A Review, J. Mater. Eng. Perform., 2014, 23(6), p 1917–192810.1007/s11665-014-0958-z ↗
29. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu, The Metallurgy and Processing Science of Metal Additive Manufacturing, Int. Mater. Rev., 2016, 61(5), p 315–36010.1080/09506608.2015.1116649 ↗
30. E.O. Olakanmi, R.F. Cochrane, and K.W. Dalgarno, A Review on Selective Laser Sintering/Melting (SLS/SLM) of Aluminium Alloy Powders: Processing, Microstructure, and Properties, Prog. Mater. Sci., 2015, 74, p 401–47710.1016/j.pmatsci.2015.03.002 ↗
31. S.L. Sing, J. An, W.Y. Yeong, and F.E. Wiria, Laser and Electron-Beam Powder-Bed Additive Manufacturing of Metallic Implants: A Review on Processes, Materials and Designs, J. Orthop. Res., 2016, 34(3), p 369–38510.1002/jor.23075 ↗
32. J.J. Lewandowski and M. Seifi, Metal Additive Manufacturing: A Review of Mechanical Properties, Annu. Rev. Mater. Res., 2016, 46, p 151–18610.1146/annurev-matsci-070115-032024 ↗
33. M. Seifi, A. Salem, J. Beuth, O. Harrysson, and J.J. Lewandowski, Overview of Materials Qualification Needs for Metal Additive Manufacturing, JOM, 2016, 68(3), p 747–76410.1007/s11837-015-1810-0 ↗
34. D.L. Bourell, Perspectives on Additive Manufacturing, Annu. Rev. Mater. Res., 2016, 46, p 1–1810.1146/annurev-matsci-070115-031606 ↗
35. K. Kempen, L. Thijs, E. Yasa, M. Badrossamay, W. Verheecke, and J. Kruth. Process Optimization and Microstructural Analysis for Selective Laser Melting of AlSi10Mg, Solid Freeform Fabrication Symposium, 2011
36. M. Jamshidinia, F. Kong, and R. Kovacevic, Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V, J. Manuf. Sci. Eng., 2013, 135(6), p 06101010.1115/1.4025746 ↗
37. J. Zhang, Y. Zhang, X. Guo, W.H. Lee, B. Hu, Z. Lu, Y.-G. Jung, and H. Lee, Characterization of Microstructure and Mechanical Properties of Direct Metal Laser Sintered 15-5 Ph1 Stainless Steel Powders and Components, TMS 2016: 145th Annual Meeting and Exhibition: Supplemental Proceedings, Wiley, 2016, p. 13–1910.1007/978-3-319-48254-5_2 ↗
38. L. Thijs, F. Verhaeghe, T. Craeghs, J.V. Humbeeck, and J.-P. Kruth, A Study of the Microstructural Evolution During Selective Laser Melting of Ti-6Al-4V, Acta Mater., 2010, 58(9), p 3303–331210.1016/j.actamat.2010.02.004 ↗
39. Y. Zhai, H. Galarraga, and D.A. Lados, Microstructure, Static Properties, and Fatigue Crack Growth Mechanisms in Ti-6Al-4V Fabricated by Additive manufacturing: LENS and EBM, Eng. Fail. Anal., 2016, 69, p 3–1410.1016/j.engfailanal.2016.05.036 ↗
40. J.D. Hunt, Steady State Columnar and Equiaxed Growth of Dendrites and Eutectic, Mater. Sci. Eng., 1984, 65(1), p 75–8310.1016/0025-5416(84)90201-5 ↗
41. L. Nastac, J. Valencia, M. Tims, and F. Dax, Advances in the Solidification of IN718 and RS5 Alloys. Proceedings of Superalloys 718, 625, 706 and Various Derivatives, 2001.10.7449/2001/Superalloys_2001_103_112 ↗
42. W.J. Sames, K.A. Unocic, R.R. Dehoff, T. Lolla, and S.S. Babu, Thermal Effects on Microstructural Heterogeneity of Inconel 718 Materials Fabricated by Electron Beam Melting, J. Mater. Res., 2014, 29(17), p 1920–193010.1557/jmr.2014.140 ↗
43. R.R. Dehoff, M.M. Kirka, F.A. List, K.A. Unocic, and W.J. Sames, Crystallographic Texture Engineering Through Novel Melt Strategies Via Electron Beam Melting: Inconel 718, Mater. Sci. Technol., 2015, 31(8), p 939–94410.1179/1743284714Y.0000000697 ↗
44. H.E. Helmer, C. Körner, and R.F. Singer, Additive Manufacturing of nickel-Based Superalloy Inconel 718 by Selective Electron Beam Melting: Processing Window and Microstructure, J. Mater. Res., 2014, 29(17), p 1987–199610.1557/jmr.2014.192 ↗
45. M. Mazur, M. Leary, M. McMillan, S. Sun, D. Shidid, and M. Brandt, 5—Mechanical Properties of Ti6Al4V and AlSi12Mg Lattice Structures Manufactured by Selective Laser Melting (SLM), Laser Additive Manufacturing, Woodhead Publishing, 2017, p. 119–16110.1016/B978-0-08-100433-3.00005-1 ↗
46. Q. Liu, Y. Wang, H. Zheng, K. Tang, L. Ding, H. Li, and S. Gong, Microstructure and Mechanical Properties of LMD–SLM Hybrid Forming Ti6Al4V Alloy, Mater. Sci. Eng. A, 2016, 660, p 24–3310.1016/j.msea.2016.02.069 ↗
47. K. Kunze, T. Etter, J. Grässlin, and V. Shklover, Texture, Anisotropy in Microstructure and Mechanical Properties of IN738LC Alloy Processed by Selective Laser Melting (SLM), Mater. Sci. Eng. A, 2015, 620, p 213–22210.1016/j.msea.2014.10.003 ↗
48. Y. Zhang and J. Zhang, Sintering Phenomena and Mechanical Strength of Nickel Based Materials in Direct Metal Laser Sintering Process—A Molecular Dynamics Study, J. Mater. Res., 2016, 31(15), p 2233–224310.1557/jmr.2016.230 ↗
49. Y. Zhang, L. Wu, H. El-Mounayri, K. Brand, and J. Zhang, Molecular Dynamics Study of the Strength of Laser Sintered Iron Nanoparticles, Proced. Manuf., 2015, 1, p 296–30710.1016/j.promfg.2015.09.031 ↗
50. J.P. Kruth, P. Mercelis, J. Van Vaerenbergh, L. Froyen, and M. Rombouts, Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting, Rapid Prototyp. J., 2005, 11(1), p 26–3610.1108/13552540510573365 ↗
51. X. Yang and C. Richard Liu, Machining Titanium and Its Alloys, Mach. Sci. Technol., 1999, 3(1), p 107–13910.1080/10940349908945686 ↗
52. T.M. Mower and M.J. Long, Mechanical Behavior of Additive Manufactured, Powder-Bed Laser-Fused Materials, Mater. Sci. Eng. A, 2016, 651, p 198–21310.1016/j.msea.2015.10.068 ↗
53. C. Qiu, N.J.E. Adkins, and M.M. Attallah, Microstructure and Tensile Properties of Selectively Laser-Melted and of HIPed Laser-Melted Ti-6Al-4V, Mater. Sci. Eng. A, 2013, 578, p 230–23910.1016/j.msea.2013.04.099 ↗
54. M. Simonelli, Y.Y. Tse, and C. Tuck, The Formation of α + β Microstructure in as-Fabricated Selective Laser Melting of Ti-6Al-4V, J. Mater. Res., 2014, 29(17), p 2028–203510.1557/jmr.2014.166 ↗
55. T. Vilaro, C. Colin, and J.D. Bartout, As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting, Metall. Mater. Trans. A, 2011, 42(10), p 3190–319910.1007/s11661-011-0731-y ↗
56. H. Galarraga, D.A. Lados, R.R. Dehoff, M.M. Kirka, and P. Nandwana, Effects of the Microstructure and Porosity on Properties of Ti-6Al-4V ELI, Alloy Fabricated by Electron Beam Melting (EBM), Addit. Manuf., 2016, 10, p 47–5710.1016/j.addma.2016.02.003 ↗
57. N. Hrabe and T. Quinn, Effects of Processing on Microstructure and Mechanical Properties of a Titanium Alloy (Ti-6Al-4V) Fabricated Using Electron Beam Melting (EBM), Part 2: Energy Input, Orientation, and Location, Mater. Sci. Eng. A, 2013, 573, p 271–27710.1016/j.msea.2013.02.065 ↗
58. H.K. Rafi, N. Karthik, T.L. Starr, and B.E. Stucker. Mechanical Property Evaluation of Ti-6Al-4V Parts Made Using Electron Beam Melting, Proceedings of the Solid Freeform Fabrication Symposium, 2012.
59. L. Facchini, E. Magalini, P. Robotti, and A. Molinari, Microstructure and Mechanical Properties of Ti-6Al-4V Produced by Electron Beam Melting of Pre-alloyed Powders, Rapid Prototyp. J., 2009, 15(3), p 171–17810.1108/13552540910960262 ↗
60. M. Krishnan, Investigation of Material and Mechanical Properties of Al Alloy and Al Based MMC Parts Produced by DMLS for Industrial Application, Politecnico di Torino, Torino, 2014, p 124
61. H.K. Rafi, T.L. Starr, and B.E. Stucker, A Comparison of the Tensile, Fatigue, and Fracture Behavior of Ti-6Al-4V and 15-5 PH Stainless Steel Parts Made by Selective Laser Melting, Int. J. Adv. Manuf. Technol., 2013, 69(5), p 1299–130910.1007/s00170-013-5106-7 ↗
62. A. Riemer, S. Leuders, M. Thöne, H.A. Richard, T. Tröster, and T. Niendorf, On the Fatigue Crack Growth Behavior in 316L Stainless Steel Manufactured by Selective Laser Melting, Eng. Fract. Mech., 2014, 120, p 15–2510.1016/j.engfracmech.2014.03.008 ↗
63. R.P. Mudge and N.R. Wald, Laser Engineered Net Shaping Advances Additive Manufacturing and Repair, Weld. J. N. Y., 2007, 86(1), p 44
64. M.S Domack, K.M. Taminger, and M. Begley. Metallurgical Mechanisms Controlling Mechanical Properties of Aluminium Alloy 2219 Produced by Electron Beam Freeform Fabrication, Materials Science Forum, Trans Tech Publ., 200610.4028/www.scientific.net/MSF.519-521.1291 ↗
65. M. Griffith, D. Keicher, and C. Atwood, Free form Fabrication of Metallic Components Using Laser Engineered Net Shaping (LENS {trademark}), Sandia National Labs, Albuquerque, NM, 1996
66. M. Griffith, D. Keicher, J. Romero, J. Smugeresky, C. Atwood, L. Harwell, and D. Greene. Laser Engineered Net Shaping (LENS) for Fabrication of Metallic Components, ASME International Mechanical Engineering Congress and Exposition, 1996.
67. X. Wu, J. Liang, J. Mei, C. Mitchell, P.S. Goodwin, and W. Voice, Microstructures of Laser-Deposited Ti-6Al-4V, Mater. Des., 2004, 25(2), p 137–14410.1016/j.matdes.2003.09.009 ↗
68. F. Wang, J. Mei, and X. Wu, Microstructure Study of Direct Laser Fabricated Ti Alloys Using Powder and Wire, Appl. Surf. Sci., 2006, 253(3), p 1424–143010.1016/j.apsusc.2006.02.028 ↗
69. X. Wu, R. Sharman, J. Mei, and W. Voice, Microstructure and Properties of a Laser Fabricated Burn-Resistant Ti Alloy, Mater. Des., 2004, 25(2), p 103–10910.1016/j.matdes.2003.10.004 ↗
70. T. Wang, Y.Y. Zhu, S.Q. Zhang, H.B. Tang, and H.M. Wang, Grain Morphology Evolution Behavior of Titanium Alloy Components During Laser Melting Deposition Additive Manufacturing, J. Alloys Compd., 2015, 632, p 505–51310.1016/j.jallcom.2015.01.256 ↗
71. P. Kobryn and S. Semiatin. Mechanical Properties of Laser-Deposited Ti-6Al-4V, Solid Freeform Fabrication Proceedings, Austin, 2001
72. J. Alcisto, A. Enriquez, H. Garcia, S. Hinkson, T. Steelman, E. Silverman, P. Valdovino, H. Gigerenzer, J. Foyos, J. Ogren, J. Dorey, K. Karg, T. McDonald, and O.S. Es-Said, Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V, J. Mater. Eng. Perform., 2011, 20(2), p 203–21210.1007/s11665-010-9670-9 ↗
73. A.J. Sterling, B. Torries, N. Shamsaei, S.M. Thompson, and D.W. Seely, Fatigue Behavior and Failure Mechanisms of Direct Laser Deposited Ti-6Al-4V, Mater. Sci. Eng. A, 2016, 655, p 100–11210.1016/j.msea.2015.12.026 ↗
74. C. Qiu, G.A. Ravi, C. Dance, A. Ranson, S. Dilworth, and M.M. Attallah, Fabrication of Large Ti-6Al-4V Structures by Direct Laser Deposition, J. Alloys Compd., 2015, 629, p 351–36110.1016/j.jallcom.2014.12.234 ↗
75. P.E. Ruff, Effect of Manufacturing Processes on Structural Allowables Phase 2, DTIC Document, New York, 1986
76. W.A. Tayon, R.N. Shenoy, M.R. Redding, R. Keith Bird, and R.A. Hafley, Correlation Between Microstructure and Mechanical Properties in an Inconel 718 Deposit Produced Via Electron Beam Freeform Fabrication, J. Manuf. Sci. Eng., 2014, 136(6), p 061005–06100710.1115/1.4028509 ↗
77. E.M. Sachs, J.S. Haggerty, M.J. Cima, and P.A. Williams, Three-Dimensional Printing Techniques. Google Patents, 1993
78. D.S. Sodhi, Nonsimultaneous Crushing During Edge Indentation of Freshwater Ice Sheets, Cold Reg. Sci. Technol., 1998, 27(3), p 179–19510.1016/S0165-232X(98)00010-X ↗
79. M. Turker, D. Godlinski, and F. Petzoldt, Effect of Production Parameters on the Properties of IN 718 Superalloy by Three-Dimensional Printing, Mater. Charact., 2008, 59(12), p 1728–173510.1016/j.matchar.2008.03.017 ↗
80. A. Mostafaei, Y. Behnamian, Y.L. Krimer, E.L. Stevens, J.L. Luo, and M. Chmielus, Effect of Solutionizing and Aging on the Microstructure and Mechanical Properties of Powder Bed Binder Jet Printed Nickel-Based Superalloy 625, Mater. Des., 2016, 111, p 482–49110.1016/j.matdes.2016.08.083 ↗
81. A. Mostafaei, J. Toman, E.L. Stevens, E.T. Hughes, Y.L. Krimer, and M. Chmielus, Microstructural Evolution and Mechanical Properties of Differently Heat-Treated Binder Jet Printed Samples From Gas- and Water-Atomized Alloy 625 Powders, Acta Mater., 2017, 124, p 280–28910.1016/j.actamat.2016.11.021 ↗
82. J.J.S. Dilip, H. Miyanaji, A. Lassell, T.L. Starr, and B. Stucker, A Novel Method to Fabricate TiAl Intermetallic Alloy 3D Parts Using Additive Manufacturing. Def. Technol., 2017, 13(2), p 72–7610.1016/j.dt.2016.08.001 ↗
83. A. Mostafaei, E.L. Stevens, E.T. Hughes, S.D. Biery, C. Hilla, and M. Chmielus, Powder Bed Binder Jet Printed Alloy 625: Densification, Microstructure and Mechanical Properties, Mater. Des., 2016, 108, p 126–13510.1016/j.matdes.2016.06.067 ↗
84. D. Hong, D.T. Chou, O.I. Velikokhatnyi, A. Roy, B. Lee, I. Swink, I. Issaev, H.A. Kuhn, and P.N. Kumta, Binder-Jetting 3D Printing and Alloy Development of New Biodegradable Fe-Mn-Ca/Mg Alloys, Acta Biomater., 2016, 45, p 375–38610.1016/j.actbio.2016.08.032 ↗
85. Y. Bai and C.B. Williams, An Exploration of Binder Jetting of Copper, Rapid Prototyp. J., 2015, 21(2), p 177–18510.1108/RPJ-12-2014-0180 ↗
86. R. Meaney, I.J. Jordaan, and J. Xiao, Analysis of Medium Scale Ice-Indentation Tests, Cold Reg. Sci. Technol., 1996, 24(3), p 279–28710.1016/0165-232X(95)00025-7 ↗
87. Y. Zhang, L. Wu, X. Guo, Y.-G. Jung, and J. Zhang, Molecular Dynamics Simulation of Electrical Resistivity in Sintering Process of Nanoparticle Silver Inks, Comput. Mater. Sci., 2016, 125, p 105–10910.1016/j.commatsci.2016.08.047 ↗
88. T. Obikawa, M. Yoshino, and J. Shinozuka, Sheet Steel Lamination for Rapid Manufacturing, J. Mater. Process. Technol., 1999, 89–90, p 171–17610.1016/S0924-0136(99)00027-8 ↗
89. D. White, Ultrasonic Object Consolidation, Google Patents, 2003
90. D.R. White, Ultrasonic Consolidation of Aluminum Tooling, Adv. Mater. Process., 2003, 161(1), p 64–65
91. R.R. Dehoff and S.S. Babu, Characterization of Interfacial Microstructures in 3003 Aluminum Alloy Blocks Fabricated by Ultrasonic Additive Manufacturing, Acta Mater., 2010, 58(13), p 4305–431510.1016/j.actamat.2010.03.006 ↗
92. H.T. Fujii, M.R. Sriraman, and S.S. Babu, Quantitative Evaluation of Bulk and Interface Microstructures in Al-3003 Alloy Builds Made by Very High Power Ultrasonic Additive Manufacturing, Metall. Mater. Trans. A, 2011, 42(13), p 4045–405510.1007/s11661-011-0805-x ↗
93. M.R. Sriraman, M. Gonser, H.T. Fujii, S.S. Babu, and M. Bloss, Thermal Transients During Processing of Materials by Very High Power Ultrasonic Additive Manufacturing, J. Mater. Process. Technol., 2011, 211(10), p 1650–165710.1016/j.jmatprotec.2011.05.003 ↗
94. J.J. Lewandowski and W.H. Hunt, Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems, The Minerals, Metals & Materials Society, Pittsburgh, 1995
95. S. Shimizu, H.T. Fujii, Y.S. Sato, H. Kokawa, M.R. Sriraman, and S.S. Babu, Mechanism of Weld Formation During Very-High-Power Ultrasonic Additive Manufacturing of Al Alloy 6061, Acta Mater., 2014, 74, p 234–24310.1016/j.actamat.2014.04.043 ↗
96. N. Sridharan, M. Gussev, R. Seibert, C. Parish, M. Norfolk, K. Terrani, and S.S. Babu, Rationalization of Anisotropic Mechanical Properties of Al-6061 Fabricated Using Ultrasonic Additive Manufacturing, Acta Mater., 2016, 117, p 228–23710.1016/j.actamat.2016.06.048 ↗
97. M.N. Gussev, N. Sridharan, M. Norfolk, K.A. Terrani, and S.S. Babu, Effect of Post Weld Heat Treatment on the 6061 Aluminum Alloy Produced by Ultrasonic Additive Manufacturing, Mater. Sci. Eng. A, 2017, 684, p 606–61610.1016/j.msea.2016.12.083 ↗
98. P.J. Wolcott, A. Hehr, C. Pawlowski, and M.J. Dapino, Process Improvements and Characterization of Ultrasonic Additive Manufactured Structures, J. Mater. Process. Technol., 2016, 233, p 44–5210.1016/j.jmatprotec.2016.02.009 ↗
99. F. Kümmel, T. Hausöl, H.W. Höppel, and M. Göken, Enhanced Fatigue Lives in AA1050A/AA5005 laminated Metal Composites Produced by Accumulative Roll Bonding, Acta Mater., 2016, 120, p 150–15810.1016/j.actamat.2016.08.039 ↗
100. D.W. Kum, T. Oyama, J. Wadsworth, and O.D. Sherby, The Impact Properties of Laminated Composites Containing Ultrahigh Carbon (UHC) Steels, J. Mech. Phys. Solids, 1983, 31(2), p 173–18610.1016/0022-5096(83)90049-2 ↗