Capabilities and limitations of the simplified smoothed particle hydrodynamics explosive welding model
Source abstract
Abstract
The process of explosive welding offers very attractive capabilities of joining dissimilar materials, but at the same time, it is a highly intricate and advanced technology involving a multitude of phenomena occurring in the colliding plates in a matter of microseconds. In this case, numerical modeling can greatly support understanding local material behavior and eventually designing the welding technology for the particular investigated metals. Therefore, this work aims to create a robust numerical model that will reflect the main mechanisms controlling the explosive welding process, consider the properties of the bonded materials, and provide results in a short time. To reflect the complexity of this process, the meshless calculation method SPH (smooth particle hydrodynamics) was used. However, before the computer-aided technology design stage, the explosive welding model has to be thoroughly investigated to eliminate any unphysical artifact that can affect the interpretation of the final results. Therefore, in the current research, the simplified model was proposed to confirm the method`s robustness and show its capabilities along with the limitations in capturing the required physics. The key aspects of the model, e.g., the role of computational domain discretization, capabilities to reflect the influence of collision angle on material behavior or local temperature increase leading to melting, were investigated. With this work, we have clearly demonstrated the high capabilities of the SPH method in simulation explosive welding complexity even with the simplified 2D model. At the same time, the importance of particular model development stages was highlighted to provide clear guidelines for researchers working in this field.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluid Dynamics Simulations and Interactions · Numerical methods in engineering · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Bataev IA, Tanaka S, Zhou Q, Lazurenko D, Junior A, Bataev A, Hokamoto K, Mori A, Chen P. Towards better understanding of explosive welding by combination of numerical simulation and experimental study. Mater Des. 2019;169: 107649. https://doi.org/10.1016/j.matdes.2019.107649.10.1016/j.matdes.2019.107649 ↗
2. Campanella D, Buffa G, Fratini L. A two steps Lagrangian-Eulerian numerical model for the simulation of explosive welding of three dissimilar materials joints. CIRP J Manuf Sci Technol. 2021;35:541–9. https://doi.org/10.1016/j.cirpj.2021.08.010.10.1016/j.cirpj.2021.08.010 ↗
3. Nassiri A, Vivek A, Abke T, Liu B, Lee T, Daehn G. Depiction of interfacial morphology in impact welded Ti/Cu bimetallic systems using smoothed particle hydrodynamics. Appl Phys Lett. 2017;110(23): 231601. https://doi.org/10.1063/1.4984742.10.1063/1.4984742 ↗
4. Ma S, Zhang X, Qiu XM. Comparison study of MPM and SPH in modeling hypervelocity impact problems. Int J Impact Eng. 2009;36(2):272–82. https://doi.org/10.1016/j.ijimpeng.2008.07.001.10.1016/j.ijimpeng.2008.07.001 ↗
5. Yanagimoto J, Banabic D, Banu M, Madej Ł. Simulation of metal forming: visualization of invisible phenomena in the digital era. CIRP Ann. 2022. https://doi.org/10.1016/j.cirp.2022.05.007.10.1016/j.cirp.2022.05.007 ↗
6. Zhang ZL, Feng DL, Liu MB. Investigation of explosive welding through whole process modeling using a density adaptive SPH method. J Manuf Process. 2018;35:169–89. https://doi.org/10.1016/j.jmapro.2018.08.004.10.1016/j.jmapro.2018.08.004 ↗
7. Wang X, Zheng Y, Liu H, Shen Z, Hu Y, Li W, Gao Y, Guo C. Numerical study of the mechanism of explosive/impact welding using smoothed particle hydrodynamics method. Mater Des. 2012;35:210–9. https://doi.org/10.1016/j.matdes.2011.09.047.10.1016/j.matdes.2011.09.047 ↗
8. Li Y, Guo J. A novel post process method for smoothed particle hydrodynamics by interpolation on specified slice plane. J Phys. 2021;2113(1): 012013. https://doi.org/10.1088/1742-6596/2113/1/012013.10.1088/1742-6596/2113/1/012013 ↗
9. Zeng R, Wu Z, Deng S, Zhu J, Chi X. Adaptive smoothing length method based on weighted average of neighboring particle density for SPH fluid simulation. Virt Real Intell Hardw. 2021;3(2):129–41. https://doi.org/10.1016/j.vrih.2018.12.001.10.1016/j.vrih.2018.12.001 ↗
10. Vignjevic R, Campbell J. Review of development of the smooth particle hydrodynamics (SPH) Method. In: predictive modeling of dynamic processes. Boston: Springer; 2009. p. 367–96. https://doi.org/10.1007/978-1-4419-0727-1_20.10.1007/978-1-4419-0727-1_20 ↗
11. Heuzé O. “Complete forms of Mie-Gruneisen equation of state. AIP Conf Proc. 2017. https://doi.org/10.1063/1.4971535.10.1063/1.4971535 ↗
12. Chen H, Tang W, Ran X, Zhang M, Xu Z. Measurement of the Mie-Grüneisen equation of state for polyimide. Chin Sci Bull. 2013;58(6):585–8. https://doi.org/10.1007/s11434-012-5602-4.10.1007/s11434-012-5602-4 ↗
13. Heuzé O. General form of the Mie-Grüneisen equation of state. Comptes Rendus Mécanique. 2012;340(10):679–87. https://doi.org/10.1016/j.crme.2012.10.044.10.1016/j.crme.2012.10.044 ↗
14. Osorio-Pinzon JC, Abolghasem S, Casas-Rodriguez JP. Predicting the Johnson Cook constitutive model constants using temperature rise distribution in plane strain machining. Int J Adv Manuf Technol. 2019;105(1–4):279–94. https://doi.org/10.1007/s00170-019-04225-9.10.1007/s00170-019-04225-9 ↗
15. Chen G, Ren C, Yang X, Jin X, Guo T. Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model. Int J Adv Manuf Technol. 2011;56(9–12):1027–38. https://doi.org/10.1007/s00170-011-3233-6.10.1007/s00170-011-3233-6 ↗
16. Sahu RR, Gupta PK. Blast Diffusion by Different Shapes of Domes. Def Sci J. 2015;65(1):77–82. https://doi.org/10.14429/dsj.65.6908.10.14429/dsj.65.6908 ↗
17. Wang Y, Zeng X, Chen H, Yang X, Wang F, Zeng L. Modified Johnson-Cook constitutive model of metallic materials under a wide range of temperatures and strain rates. Results Phys. 2021;27: 104498. https://doi.org/10.1016/j.rinp.2021.104498.10.1016/j.rinp.2021.104498 ↗
18. Zhang S, Kinsey BL. Influence of material properties on interfacial morphology during magnetic pulse welding of Al1100 to copper alloys and commercially pure titanium. J Manuf Mater Process. 2021;5(2):64. https://doi.org/10.3390/jmmp5020064.10.3390/jmmp5020064 ↗
19. Nassiri A, Shang S, Lee T, Abke T, Vivek A, Kinsey B, Daehn G. Numerical investigation of CP-Ti & Cu110 impact welding using smoothed particle hydrodynamics and arbitrary Lagrangian-Eulerian methods. J Manuf Process. 2017;28:558–64. https://doi.org/10.1016/j.jmapro.2017.04.032.10.1016/j.jmapro.2017.04.032 ↗
20. Parchuri PK, Kotegawa S, Ito K, Yamamoto H, Mori A, Tanaka S, Hokamoto K. Cladding of a crack-free W plate on Cu plates using explosive welding at higher collision velocity with lower collision angle. Results Mater. 2020;5: 100023. https://doi.org/10.1016/j.rinma.2019.100023.10.1016/j.rinma.2019.100023 ↗
21. Akbari Mousavi AA, Burley SJ, Al-Hassani STS. Simulation of explosive welding using the Williamsburg equation of state to model low detonation velocity explosives. Int J Impact Eng. 2005;31(6):719–34. https://doi.org/10.1016/j.ijimpeng.2004.03.003.10.1016/j.ijimpeng.2004.03.003 ↗
22. Paul H, Chulist R, Miszczyk M, Lityńska-Dobrzyńska L, Cios G, Gałka A, Petrzak P, Szlezynger M. Towards a better understanding of the phase transformations in explosively welded copper to titanium sheets. Mater Sci Eng, A. 2020;784: 139285. https://doi.org/10.1016/j.msea.2020.139285.10.1016/j.msea.2020.139285 ↗