Selective Laser Sintering of Polydimethylsiloxane Composites
Source abstract
Abstract
Conductive silicone elastomer carbon nanotubes (CNTs) composites possess potential applications in a variety of fields, including electronic skin, wearable electronics, and human motion detection. Based on a novel self-made covalent adaptable network (CANs) of polydimethylsiloxane (PDMS) containg dynamic steric-hindrance pyrazole urea bond (PDMS-CANs), CNTs wrapped PDMS-CANs (CNTs@PDMS-CANs) powders were prepared by a liquid phase adsorption and deposition, and were successfully used for selective laser sintering (SLS) three-dimensional printing. SLS-printed PDMS-CANs/CNTs nanocomposites possess high electrical conductivity and low percolation threshold as SLS is one kind of quasi-static processing, which leads to the formation of conductive segregated CNTs network by using the PDMS powders with special CNTs wrapped structure. The introduction of dynamic pyrazole urea bond endows the materials self-healing capability under electrothermal and photothermal stimulus. In addition, due to the resistance difference of the damaged and intact areas, crack diagnosing can be realized by infrared thermograph under electricity. In an application demonstration in strain sensor, the composite exhibits a regular cyclic electrical resistance change at cyclic compression and bending, indicating a relative high reliability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, China.
References (60)
Show source-provided references
1. 10.1016/j.progpolymsci.2019.03.00110.1016/j.progpolymsci.2019.03.001 ↗
2. 10.1021/acs.chemrev.7b0007410.1021/acs.chemrev.7b00074 ↗
3. 10.1002/adfm.20200306210.1002/adfm.202003062 ↗
4. 10.1016/j.pmatsci.2011.04.00110.1016/j.pmatsci.2011.04.001 ↗
5. 10.1016/j.progpolymsci.2019.10116210.1016/j.progpolymsci.2019.101162 ↗
6. 10.1557/jmr.2014.13810.1557/jmr.2014.138 ↗
7. 10.1016/B978-0-12-819535-2.00006-510.1016/B978-0-12-819535-2.00006-5 ↗
8. 10.1016/j.matdes.2005.11.02110.1016/j.matdes.2005.11.021 ↗
9. 10.1016/j.matdes.2018.01.05010.1016/j.matdes.2018.01.050 ↗
10. Athreya SR, , Kalaitzidou K, , Das S. Microstructure. Thermomechanical properties, and electrical conductivity of carbon black-filled nylon-12 nanocomposites prepared by selective laser sintering. Polym Eng Sci, 2011; 52:12–20.
11. 10.1016/j.carbon.2013.07.04310.1016/j.carbon.2013.07.043 ↗
12. 10.1177/095440541244006610.1177/0954405412440066 ↗
13. 10.1557/jmr.2014.17210.1557/jmr.2014.172 ↗
14. 10.1016/j.matdes.2017.01.09810.1016/j.matdes.2017.01.098 ↗
15. 10.1016/j.phpro.2016.08.10210.1016/j.phpro.2016.08.102 ↗
16. 10.1016/j.addma.2017.03.00110.1016/j.addma.2017.03.001 ↗
17. Sun SJ, , Gan XP, , Wang ZH, et al. Dynamic healable polyurethane for selective laser sintering. Addit Manuf, 2020; 33:101176.
18. 10.1016/j.powtec.2020.05.00510.1016/j.powtec.2020.05.005 ↗
19. 10.1080/17452759.2016.121192510.1080/17452759.2016.1211925 ↗
20. 10.18063/ijb.v6i2.27410.18063/ijb.v6i2.274 ↗
21. 10.1080/17452759.2020.171945710.1080/17452759.2020.1719457 ↗
22. 10.18063/ijb.v6i1.24910.18063/ijb.v6i1.249 ↗
23. 10.1016/j.actbio.2009.12.03310.1016/j.actbio.2009.12.033 ↗
24. 10.1016/j.progpolymsci.2019.10114410.1016/j.progpolymsci.2019.101144 ↗
25. 10.1016/j.addma.2018.10.00210.1016/j.addma.2018.10.002 ↗
26. Luis GE, , Liu H, , Yeong WY. Silicone 3D printing technologies and processes: a review. In: Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018). Singapore, 2018; pp.170–175.
27. 10.1002/adfm.20140045110.1002/adfm.201400451 ↗
28. 10.1126/sciadv.150065510.1126/sciadv.1500655 ↗
29. 10.1039/c4lc00320a10.1039/c4lc00320a ↗
30. 10.1088/1361-665X/aa969510.1088/1361-665X/aa9695 ↗
31. 10.1016/j.cej.2021.12867510.1016/j.cej.2021.128675 ↗
32. 10.1016/j.progpolymsci.2018.11.00110.1016/j.progpolymsci.2018.11.001 ↗
33. 10.1039/C8CS00738A10.1039/C8CS00738A ↗
34. Abbasi H, , Antunes M, , Velasco JI, et al. Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding. Prog Polym Sci, 2019; 103:319–373.
35. 10.1016/j.compositesa.2015.05.01410.1016/j.compositesa.2015.05.014 ↗
36. 10.1016/j.apmt.2017.04.00310.1016/j.apmt.2017.04.003 ↗
37. 10.1016/j.matdes.2017.06.01110.1016/j.matdes.2017.06.011 ↗
38. 10.1038/s41598-019-49939-810.1038/s41598-019-49939-8 ↗
39. 10.1115/1.404464910.1115/1.4044649 ↗
40. 10.1021/acsami.9b0487310.1021/acsami.9b04873 ↗
41. 10.1021/acsami.8b1861410.1021/acsami.8b18614 ↗
42. 10.3390/ma1323548210.3390/ma13235482 ↗
43. 10.3390/polym1104066610.3390/polym11040666 ↗
44. 10.1002/adma.20140033410.1002/adma.201400334 ↗
45. Truby RL, , Wehner M, , Grosskopf AK, et al. Soft somatosensitive actuators via embedded 3D printing. Adv Mater, 2018; 30:e1706383.
46. 10.1016/j.compositesb.2020.10822410.1016/j.compositesb.2020.108224 ↗
47. 10.1002/adem.20180042510.1002/adem.201800425 ↗
48. 10.1016/j.sna.2017.03.00510.1016/j.sna.2017.03.005 ↗
49. 10.1021/acsami.9b0315610.1021/acsami.9b03156 ↗
50. 10.1021/acsnano.9b0628310.1021/acsnano.9b06283 ↗
51. 10.1021/acsami.9b1963210.1021/acsami.9b19632 ↗
52. 10.1002/mame.20170021110.1002/mame.201700211 ↗
53. 10.3390/app905086410.3390/app9050864 ↗
54. 10.1016/j.compositesa.2017.11.00710.1016/j.compositesa.2017.11.007 ↗
55. 10.1002/advs.20180010110.1002/advs.201800101 ↗
56. 10.1016/j.progpolymsci.2018.11.00210.1016/j.progpolymsci.2018.11.002 ↗
57. 10.1016/j.matdes.2019.10787410.1016/j.matdes.2019.107874 ↗
58. Li DX, , Fei GX, , Xia HS, et al. Micro-contact reconstruction of adjacent carbon nanotubes in polymer matrix through annealing-induced relaxation of interfacial residual stress and strain. J Appl Polym Sci, 2015; 132:1–11.
59. 10.1016/j.progpolymsci.2014.07.00710.1016/j.progpolymsci.2014.07.007 ↗
60. 10.1038/s41598-017-12443-y10.1038/s41598-017-12443-y ↗