Corrosion Performance of Wire Arc Additive Manufacturing of Stainless Steel: A Brief Critical Assessment
Source abstract
Abstract
To enhance the products fabricated from wire arc additive manufacturing (WAAM) processes, it is very important to implement a critical assessment of the corrosion performance of additively manufactured stainless steel (SS) for the application of additive manufacturing parts widely used in industries. The common defects in metal additive manufacturing, which include porosity, poor surface finish, oxidation, environmental factor, residual stress, and microstructural defects, are known to significantly influence the corrosion behavior of WAAM-processed SS components prepared to be used under different corrosive and marine environments. This article reviews the recently published works on WAAM-processed SS and provides a critical overview method to improve the corrosion performance of SS components built with the WAAM processes. It also documents some significant factors that determine the corrosion resistance of WAAM-processed SS and identifies key areas for future work.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial and Production Engineering and Federal University of Technology, Akure, Nigeria.
Department of Mechanical Engineering, Federal University of Technology, Akure, Nigeria.
References (78)
Show source-provided references
1. 10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
2. 10.1016/j.matdes.2021.11000810.1016/j.matdes.2021.110008 ↗
3. 10.14232/analecta.2020.1.9-1810.14232/analecta.2020.1.9-18 ↗
4. Barbosa WS, , Wanderley RF, , Gioia MM, et al. Additive or subtractive manufacturing: Analysis and comparison of automotive spare parts. J Remanufacturing, 2021; 6:1–14.
5. 10.1080/02670836.2022.204554910.1080/02670836.2022.2045549 ↗
6. 10.1007/s11665-021-05936-510.1007/s11665-021-05936-5 ↗
7. 10.3390/met1103051610.3390/met11030516 ↗
8. Kong D, , Dong C, , Xiaoqing NX, et al. Corrosion of metallic materials fabricated by selective laser melting. Mater Degrad, 2019; 3(2):1–14.
9. Dutta SK. Different types and new applications of stainless steel. Iron Steel Rev, 2018; 6(5):1–5.
10. 10.1007/s11665-013-0784-810.1007/s11665-013-0784-8 ↗
11. 10.1016/S1003-6326(22)65802-310.1016/S1003-6326(22)65802-3 ↗
12. Ettefagh HA. Corrosion performance of additively manufactured alloys and hot corrosion. LSU Doctoral Dissertations, 2021; 5452; Available at: https://digitalcommons.lsu.edu/gradschool_dissertations/5452. Accessed on January13, 2021.
13. 10.2320/matertrans.MT-MBW201900310.2320/matertrans.MT-MBW2019003 ↗
14. 10.1016/j.jmbbm.2015.07.01610.1016/j.jmbbm.2015.07.016 ↗
15. Mabruri E, , Anwar MS, , Prifiharni S, et al. Tensile properties of the modified 13 Cr martensitic stainless steels. AIP Conf Proc, 2015; 1725:020039-1–020039-5.
16. Aygul E, , Yalcinkaya S, , Sahin Y. Corrosion characteristics of additive-manufacturing cobalt–chrome–wolfram biomedical alloy under heat-treated and molybdenum-doped conditions. Mater Technol, 2020; 54(4):535–539.
17. 10.3390/app1005156310.3390/app10051563 ↗
18. 10.1051/e3sconf/20212790101210.1051/e3sconf/202127901012 ↗
19. 10.1016/j.optlastec.2017.11.03210.1016/j.optlastec.2017.11.032 ↗
20. 10.1016/j.msea.2016.09.02810.1016/j.msea.2016.09.028 ↗
21. 10.1080/1478422X.2018.151132710.1080/1478422X.2018.1511327 ↗
22. 10.1149/MA2010-02/14/125010.1149/MA2010-02/14/1250 ↗
23. 10.1002/maco.1995046110410.1002/maco.19950461104 ↗
24. 10.1016/0013-4686(91)85260-E10.1016/0013-4686(91)85260-E ↗
25. Chen J, , Xiao Q, , Lee HB, et al. Enhanced pitting resistance of directed energy deposition 316L stainless steel by post-manufacturing heat treatment. Mater Degrad, 2022; 6(33):1–9.
26. Voisin T, , Shi R, , Zhu Y, et al. Pitting corrosion in 316L stainless steel fabricated by laser powder bed fusion additive manufacturing: A review and perspective. JOM, 2021; 1–38; doi: 10.1007/s11837-022-05206-2
27. Laycock NJ, , Stewart J, , Newm RC. The initiation of crevice corrosion in stainless steels. Corros Sci, 1998; 39(10–110):1791–1809.
28. Shao Y. Surface finishing and corrosion resistance of 3D printed maraging steel. Product development and material engineering. Master Thesis, 2020; 1–57.
29. 10.1007/BF0265826710.1007/BF02658267 ↗
30. 10.1016/j.corsci.2010.02.01510.1016/j.corsci.2010.02.015 ↗
31. 10.1088/1757-899X/547/1/01205910.1088/1757-899X/547/1/012059 ↗
32. 10.3390/met1102032710.3390/met11020327 ↗
33. Ningshen S, , Mudali UK G. Amarendra G, et al. Corrosion assessment of nitric acid grade austenitic stainless steels. Corr Sci, 2009; 51:322–329.
34. Sprouster DJ, , Cunningham WS, , Halada GP, et al. Dislocation microstructure and its influence on corrosion behavior in laser additively manufactured 316L stainless steel. Addit Manuf, 2021; 47:1–13.
35. 10.1088/2053-1591/abcc5d10.1088/2053-1591/abcc5d ↗
36. 10.1016/j.jmatprotec.2019.01.00710.1016/j.jmatprotec.2019.01.007 ↗
37. Jonas HL, , Salar S, , Mahya G, et al. Beneficiary effect of tempering process on the corrosion performance of wire arc additively manufactured 420 martensitic stainless steel. Master Thesis, 2021; 1–114.
38. 10.3390/ma1312279510.3390/ma13122795 ↗
39. Xiaodong Z, , Ben N, , Linlin P, et al. Wire+arc additive manufacturing and heat treatment of super martensitic stainless steel with a refined microstructure and excellent mechanical properties. Materials (Basel), 2022; 15(7):1–25; doi: 10.3390/ma15072624
40. 10.1186/s10033-018-0276-810.1186/s10033-018-0276-8 ↗
41. 10.1149/1.205473210.1149/1.2054732 ↗
42. Rauch M, , Hascoet J. Improving additive manufactured surfaces properties with post-processing techniques. Euspen, 2021; 1–4.
43. 10.1016/S0010-938X(97)00072-310.1016/S0010-938X(97)00072-3 ↗
44. 10.3390/met1210165510.3390/met12101655 ↗
45. 10.1557/jmr.2020.7010.1557/jmr.2020.70 ↗
46. 10.1088/2053-1591/ac3b7d10.1088/2053-1591/ac3b7d ↗
47. Trisnanto SR. Corrosion properties of 316L stainless steel prepared by laser powder bed fusion: A study on the effect of crystallographic orientation on general and pitting corrosion behavior. Master Thesis, 2021; 1–83.
48. Chakravarthy V, , Jerome S. Printability of multiwalled SS 316L by wire arc additive manufacturing route with tunable texture. Mater Lett, 2019; 1–4.
49. 10.1108/1355254061070701310.1108/13552540610707013 ↗
50. 10.5006/292610.5006/2926 ↗
51. 10.4236/aces.2015.5100710.4236/aces.2015.51007 ↗
52. 10.1016/j.electacta.2009.04.02310.1016/j.electacta.2009.04.023 ↗
53. 10.1361/10599490277034362910.1361/105994902770343629 ↗
54. 10.3390/ma1401005510.3390/ma14010055 ↗
55. Pütz RD, , Pratesa Y, , Oster L, et al. Microstructure and corrosion behavior of functionally graded wire arc additive manufactured steel combinations. Steel Res Int, 2021; 1–13:2100387.
56. 10.3390/ma1504135310.3390/ma15041353 ↗
57. 10.1016/j.corsci.2020.10891410.1016/j.corsci.2020.108914 ↗
58. Kozuh S, , Gojic M, , Vrsalovic L, et al. Corrosion failure and microstructure analysis of AISI 316L stainless steel for ship pipeline before and after welding. Kov Mater, 2013; 51:53–61.
59. 10.1007/978-3-030-36296-6_4110.1007/978-3-030-36296-6_41 ↗
60. 10.3390/met1011141910.3390/met10111419 ↗
61. Zaharia SM, , Lancea C, , Chicos LA, et al. Mechanical properties and corrosion behaviour of 316L stainless steel honeycomb cellular cores manufactured by selective laser melting. Trans Famena, 2017; 4:1–14.
62. 10.1016/j.msea.2017.10.00210.1016/j.msea.2017.10.002 ↗
63. 10.14232/analecta.2021.2.9-1910.14232/analecta.2021.2.9-19 ↗
64. 10.1007/s40033-021-00313-x10.1007/s40033-021-00313-x ↗
65. Olugbade TO, , Ojo OT, , Omiyale BO, et al. A review on the corrosion fatigue strength of surface-modified stainless steels. J Braz Soc Mech Sci Eng, 2021; 43(421):1–13.
66. Olugbade TO, , Abioye TE, , Farayibi PK, et al. Electrochemical properties of MgZnCa-based thin film metallic glasses fabricated by magnetron sputtering deposition coated on a stainless steel substrate. Anal Lett, 2020; 1–14.
67. 10.1515/CORRREV.2011.00410.1515/CORRREV.2011.004 ↗
68. Olugbade TO. Corrosion Resistance, Evaluation Methods, and Surface Treatments of Stainless Steels. In: Stainless Steels. Intech-Open Chapter Book Series. United Kingdom, 2021; pp. 1–8.
69. Ijiri M, , Yoshimura T. Improvement of corrosion resistance of low-alloy steels by resurfacing using multifunction cavitation in water. Mater Sci Eng, 2021; 307:012040.
70. Gharbi K, , Moussa NB, , Rhouma AB, et al. Improvement of the corrosion behavior of AISI 304L stainless steel by deep rolling treatment under cryogenic cooling. Res Sq, 2021; 1–41.
71. 10.1016/j.jmatprotec.2013.05.02110.1016/j.jmatprotec.2013.05.021 ↗
72. Kazazi M, , Haghighi M, , Yarali D, et al. Improving corrosion resistance of 316L austenitic stainless steel using ZrO2 sol-gel coating in nitric acid solution. J Mater Eng Perform, 2018; 1–10.
73. 10.1002/adem.20190036510.1002/adem.201900365 ↗
74. 10.1038/s41598-019-48594-310.1038/s41598-019-48594-3 ↗
75. Olugbade TO. Electrochemical characterization of the corrosion of mild steel in saline following mechanical deformation. Anal Lett, 2020; 1–14.
76. Olugbade T, , Lu J. Enhanced corrosion properties of nanostructured 316 stainless steel in 0.6 M NaCl solution. J Bio Tribo Corros, 2019; 5(38):1–11.
77. 10.1002/adem.20190012510.1002/adem.201900125 ↗
78. 10.1016/j.matlet.2021.13101510.1016/j.matlet.2021.131015 ↗