Effect of high-intensity microwave (HIMW) treatment on chemistry of radiata pine
Source abstract
Abstract
This study investigated the effect of high-intensity microwave (HIMW) treatment on the chemistry of sapwood and heartwood of radiata pine. The wet chemical method, X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) were utilized to assess and evaluate the effect of different microwave energy densities (0, 60, 80, and 100 kWh/m³) on the chemical composition, chemical structure, and cellulose crystallinity of both sapwood and heartwood. The results indicated that the greatest changes in the relative content of lignin and cellulose were observed at a microwave energy density of 80 kWh/m³. Furthermore, XPS analysis demonstrated a decrease in the O/C ratio as the microwave energy density increased. When the energy density of microwave reached 100 kWh/m³, the O/C ratio of sapwood and heartwood decreased by 10.2% and 19.6%, respectively. At the same time, no notable changes were detected in the FTIR spectra of the microwave-treated samples. Due to the recrystallization of cellulose and the presence of aromatic C=O groups, which could be linked to the rise in lignin content, there were slight variations in several absorption intensities and peak positions, such as O–H groups. As microwave energy density increased, both the crystallinity index (CI) and cellulose crystal width (D₂₀₀) of HIMW-treated samples increased accordingly. The findings indicated that the chemistry of radiate pine’s sapwood and heartwood was affected differently by the microwave treatment. Notably, the heartwood exhibited a more pronounced impact compared to the sapwood.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lignin and Wood Chemistry · Wood Treatment and Properties · Wood and Agarwood Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Balboni BM, Ozarska B, Garcia JN, Torgovnikov G (2018) Microwave treatment of eucalyptus macrorhyncha timber for reducing drying defects and its impact on physical and mechanical wood properties. Eur J Wood Prod 76(3):861–870. https://doi.org/10.1007/s00107-017-1260-110.1007/s00107-017-1260-1 ↗
2. Bhuiyan TR, Hirai N (2005) Study of crystalline behavior of heat-treated wood cellulose during treatments in water. J Wood Sci 51(1):42–47. https://doi.org/10.1007/s10086-003-0615-x10.1007/s10086-003-0615-x ↗
3. Bhuiyan MTRS, Hirai N, Sobue N (2000) Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions. J Wood Sci 46(6):431–436. https://doi.org/10.1007/BF0076580010.1007/BF00765800 ↗
4. Bichot A, Lerosty M, Radoiu M et al (2020) Decoupling thermal and non-thermal effects of the microwaves for lignocellulosic biomass pretreatment. Energy Convers Manag 203:112220. https://doi.org/10.1016/j.enconman.2019.11222010.1016/j.enconman.2019.112220 ↗
5. Boonstra MJ, Tjeerdsma B (2006) Chemical analysis of heat treated softwoods. Holz Roh- Werkst 64(3):204–211. https://doi.org/10.1007/s00107-005-0078-410.1007/s00107-005-0078-4 ↗
6. Cai S, Zhang N, Li K, Li Y, Wang X (2019) Effect of pressurized hot water treatment on the mechanical properties, surface color, chemical composition and crystallinity of pine wood. Wood Res 64(3):389–400
7. Cao C, Yang Z, Han L, Jiang X, Ji G (2015) Study on in situ analysis of cellulose, hemicelluloses and lignin distribution linked to tissue structure of crop stalk internodal transverse section based on FTIR microspectroscopic imaging. Cellulose 22(1):139–149. https://doi.org/10.1007/s10570-014-0525-710.1007/s10570-014-0525-7 ↗
8. Cave ID (1997) Theory of X-ray measurement of microfibril angle in wood. Wood Sci Technol 31(4):225–234. https://doi.org/10.1007/BF0070261010.1007/BF00702610 ↗
9. Chai Y, Liang S, Zhou Y, Lin L, Fu F (2020) Low-melting-point alloy integration into puffed wood for improving mechanical and thermal properties of wood–metal functional composites. Wood Sci Technol 54(3):637–649. https://doi.org/10.1007/s00226-020-01174-510.1007/s00226-020-01174-5 ↗
10. Chaouch M, Pétrissans M, Pétrissans A, Gérardin P (2010) Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species. Polym Degrad Stabil 95(12):2255–2259. https://doi.org/10.1016/j.polymdegradstab.2010.09.01010.1016/j.polymdegradstab.2010.09.010 ↗
11. Chen Y, Tshabalala MA, Gao J, Stark NM, Fan Y (2014) Color and surface chemistry changes of extracted wood flour after heating at 120°C. Wood Sci Technol 48(1):137–150. https://doi.org/10.1007/s00226-013-0582-310.1007/s00226-013-0582-3 ↗
12. Chien Y, Yang T, Hung K, Li C, Xu J, Wu J (2018) Effects of heat treatment on the chemical compositions and thermal decomposition kinetics of Japanese cedar and beech wood. Polym Degrad Stabil 158:220–227. https://doi.org/10.1016/j.polymdegradstab.2018.11.00310.1016/j.polymdegradstab.2018.11.003 ↗
13. Colom X, Carrillo F, Nogués F, Garriga P (2003) Structural analysis of photodegraded wood by means of FTIR spectroscopy. Polym Degrad Stabil 80(3):543–549. https://doi.org/10.1016/S0141-3910(03)00051-X10.1016/S0141-3910(03)00051-X ↗
14. Dömény J, Čermák P, Koiš V, Tippner J, Rousek R (2018) Density profile and microstructural analysis of densified beech wood (Fagus sylvatica L.) plasticized by microwave treatment. Eur J Wood Prod 76(1):105–111. https://doi.org/10.1007/s00107-017-1173-z10.1007/s00107-017-1173-z ↗
15. Fan Z, Peng L, Liu M, Feng Y, He J, Wu S (2022) Analysis of influencing factors on sound absorption capacity in microwave-treated Pinus radiata wood. Eur J Wood Prod 80(4):985–995. https://doi.org/10.1007/s00107-021-01774-310.1007/s00107-021-01774-3 ↗
16. Funaoka M, Kako T, Abe I (1990) Condensation of lignin during heating of wood. Wood Sci Technol 24(3):277–288. https://doi.org/10.1007/BF0115356010.1007/BF01153560 ↗
17. García-Iruela A, Esteban LG, García Fernández F et al (2021) Changes in cell wall components and hygroscopic properties of Pinus radiata caused by heat treatment. Eur J Wood Prod 79(4):851–861. https://doi.org/10.1007/s00107-021-01678-210.1007/s00107-021-01678-2 ↗
18. Garrote G, Dominguez H, Parajo JC (2001) Study on the deacetylation of hemicelluloses during the hydrothermal processing of Eucalyptus wood. Eur J Wood Prod 59(1–2):53–59. https://doi.org/10.1007/s00107005047310.1007/s001070050473 ↗
19. Gérardin P, Petrič M, Petrissans M, Lambert J, Ehrhrardt JJ (2007) Evolution of wood surface free energy after heat treatment. Polym Degrad Stabil 92(4):653–657. https://doi.org/10.1016/j.polymdegradstab.2007.01.01610.1016/j.polymdegradstab.2007.01.016 ↗
20. Guo J, Rennhofer H, Yin Y, Lichtenegger HC (2016) The influence of thermo-hygro-mechanical treatment on the micro- and nanoscale architecture of wood cell walls using small- and wide-angle X-ray scattering. Cellulose 23(4):2325–2340. https://doi.org/10.1007/s10570-016-0982-210.1007/s10570-016-0982-2 ↗
21. Guo X, Wu Y, Yan N (2018a) In situ micro-FTIR observation of molecular association of adsorbed water with heat-treated wood. Wood Sci Technol 52(4):971–985. https://doi.org/10.1007/s00226-018-1020-310.1007/s00226-018-1020-3 ↗
22. Guo J, Zhou H, Stevanic JS et al (2018b) Effects of ageing on the cell wall and its hygroscopicity of wood in ancient timber construction. Wood Sci Technol 52(1):131–147. https://doi.org/10.1007/s00226-017-0956-z10.1007/s00226-017-0956-z ↗
23. Hermoso E, Vega A (2016) Effect of microwave treatment on the impregnability and mechanical properties of Eucalyptus globulus wood. Maderas Ciencia y Tecnología 18(1):55–64. https://doi.org/10.4067/S0718-221X201600500000610.4067/S0718-221X2016005000006 ↗
24. Inagaki T, Siesler HW, Mitsui K, Tsuchikawa S (2010) Difference of the crystal structure of cellulose in wood after hydrothermal and aging degradation: a NIR spectroscopy and XRD study. Biomacromol 11(9):2300–2305. https://doi.org/10.1021/bm100403y10.1021/bm100403y ↗
25. Inari GN, Petrissans M, Lambert J, Ehrhardt JJ, Gérardin P (2006) XPS characterization of wood chemical composition after heat-treatment. Surf Interface Anal 38(10):1336–1342. https://doi.org/10.1002/sia.245510.1002/sia.2455 ↗
26. Jalaludin Z, Hill CAS, Xie Y et al (2010) Analysis of the water vapour sorption isotherms of thermally modified acacia and sesendok. Wood Mater Sci Eng 5(3–4):194–203. https://doi.org/10.1080/17480272.2010.50394010.1080/17480272.2010.503940 ↗
27. Jang E, Yuk J, Kang C (2020) An experimental study on change of gas permeability depending on pore structures in three species (Hinoki, Douglas Fir, and Hemlock) of softwood. J Wood Sci. https://doi.org/10.1186/s10086-020-01925-910.1186/s10086-020-01925-9 ↗
28. Kocaefe D, Huang X, Kocaefe Y, Boluk Y (2013) Quantitative characterization of chemical degradation of heat-treated wood surfaces during artificial weathering using XPS. Surf Interface Anal 45(2):639–649. https://doi.org/10.1002/sia.510410.1002/sia.5104 ↗
29. Kushnir EY, Autlov SA, Bazarnova NG (2015) Preparation of microcrystalline cellulose directly from wood under microwave radiation. Russ J Bioorg Chem 41(7):713–718. https://doi.org/10.1134/S106816201507007910.1134/S1068162015070079 ↗
30. Lee SH, Ashaari Z, Lum WC et al (2018) Thermal treatment of wood using vegetable oils: a review. Constr Build Mater 181:408–419. https://doi.org/10.1016/j.conbuildmat.2018.06.05810.1016/j.conbuildmat.2018.06.058 ↗
31. Li M, Cheng S, Li D, Wang S, Huang A, Sun S (2015) Structural characterization of steam-heat treated Tectona grandis wood analyzed by FT-IR and 2D-IR correlation spectroscopy. Chin Chem Lett 26(2):221–225. https://doi.org/10.1016/j.cclet.2014.11.02410.1016/j.cclet.2014.11.024 ↗
32. Li M, Ren H, Wang Y, Gong Y, Zhou Y (2021a) Comparative studies on the mechanical properties and microstructures of outerwood and corewood in Pinus radiata D. Don. J Wood Sci. https://doi.org/10.1186/s10086-021-01992-610.1186/s10086-021-01992-6 ↗
33. Li T, Li G, Li J, Li X, Li M, Li Y (2021b) HS-SPME and GC-MS for the analysis of odorous constituents from heat-treated rubberwood and the chemical change of heat-treated rubberwood by XPS analysis. Wood Sci Technol 55(2):361–378. https://doi.org/10.1007/s00226-020-01253-710.1007/s00226-020-01253-7 ↗
34. Liu HH, Wang QW, Yang L, Jiang T, Cai YC (2005) Modification of larch wood by intensive microwave irradiation. J Forestry Res 16(3):237–240. https://doi.org/10.1007/BF0285682310.1007/BF02856823 ↗
35. Liu Y, Sun B, Zheng X, Yu L, Li J (2018) Integrated microwave and alkaline treatment for the separation between hemicelluloses and cellulose from cellulosic fibers. Bioresour Technol 247:859–863. https://doi.org/10.1016/j.biortech.2017.08.05910.1016/j.biortech.2017.08.059 ↗
36. Mascarenhas FJR, Dias AMPG, Christoforo AL (2021) State of the art of microwave treatment of wood: literature review. Forests 12(6):745. https://doi.org/10.3390/f1206074510.3390/f12060745 ↗
37. Ouertani S, Koubaa A, Azzouz S, Bahar R, Hassini L, Belghith A (2018) Microwave drying kinetics of jack pine wood: determination of phytosanitary efficacy, energy consumption, and mechanical properties. Eur J Wood Prod 76(4):1101–1111. https://doi.org/10.1007/s00107-018-1316-x10.1007/s00107-018-1316-x ↗
38. Pandey KK, Vuorinen T (2008) Comparative study of photodegradation of wood by a UV laser and a xenon light source. Polym Degrad Stabil 93(12):2138–2146. https://doi.org/10.1016/j.polymdegradstab.2008.08.01310.1016/j.polymdegradstab.2008.08.013 ↗
39. Panthapulakkal S, Kirk D, Sain M (2015) Alkaline extraction of xylan from wood using microwave and conventional heating. J Appl Polym Sci. https://doi.org/10.1002/app.4133010.1002/app.41330 ↗
40. Poletto M, Zattera AJ, Forte MMC, Santana RMC (2012) Thermal decomposition of wood: influence of wood components and cellulose crystallite size. Bioresour Technol 109:148–153. https://doi.org/10.1016/j.biortech.2011.11.12210.1016/j.biortech.2011.11.122 ↗
41. Popescu CM, Pfriem A (2020) Treatments and modification to improve the reaction to fire of wood and wood based products—an overview. Fire Mater 44(1):100–111. https://doi.org/10.1002/fam.277910.1002/fam.2779 ↗
42. Popescu CM, Popescu MC, Singurel G, Vasile C, Argyropoulos DS, Willfor S (2007) Spectral characterization of Eucalyptus wood. Appl Spectrosc 61(11):1168–1177. https://doi.org/10.1366/00037020778259707610.1366/000370207782597076 ↗
43. Saleem E, Omar R, Kamal SMM, Biak DRA (2015) Microwave-assisted pretreatment of lignocellulosic biomass: a review. J Eng Sci Technol 10:97–109
44. Sarén M, Serimaa R (2006) Determination of microfibril angle distribution by X-ray diffraction. Wood Sci Technol 40(6):445–460. https://doi.org/10.1007/s00226-005-0052-710.1007/s00226-005-0052-7 ↗
45. Shen W, Yang J, Xiao Z et al (2020) Import and application analysis of radiata pine in New Zealand (in Chinese). Int Wood Ind 50(4):38–42
46. Song J, Chen C, Wang C et al (2017) Superflexible wood. ACS Appl Mater Inter 9(28):23520–23527. https://doi.org/10.1021/acsami.7b0652910.1021/acsami.7b06529 ↗
47. Sun D, Woods JL (1993) The moisture content/relative humidity equilibrium relationship of wheat—a review. Dry Technol 11(7):1523–1551. https://doi.org/10.1080/0737393930891691810.1080/07373939308916918 ↗
48. Sundqvist B, Karlsson O, Westermark U (2006) Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness. Wood Sci Technol 40(7):549–561. https://doi.org/10.1007/s00226-006-0071-z10.1007/s00226-006-0071-z ↗
49. Tjeerdsma BF, Militz H (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz Roh- Werkst 63(2):102–111. https://doi.org/10.1007/s00107-004-0532-810.1007/s00107-004-0532-8 ↗
50. Torgovnikov G, Vinden P (2009) High-intensity microwave wood modification for increasing permeability. Forest Prod J 59(4):84–92
51. Torgovnikov G, Vinden P (2010) Microwave wood modification technology and its applications. Forest Prod J 60(2):173–182. https://doi.org/10.13073/0015-7473-60.2.17310.13073/0015-7473-60.2.173 ↗
52. Truss RW, Wood B, Rasch R (2016) Quantitative surface analysis of hemp fibers using XPS, conventional and low voltage in-lens SEM. J Appl Polym Sci 133(8):43023. https://doi.org/10.1002/app.4302310.1002/app.43023 ↗
53. Vinden P, Torgovnikov G, Hann J (2011) Microwave modification of Radiata pine railway sleepers for preservative treatment. Eur J Wood Prod 69(2):271–279. https://doi.org/10.1007/s00107-010-0428-810.1007/s00107-010-0428-8 ↗
54. Virtanen T, Svedström K, Andersson S et al (2012) A physico-chemical characterisation of new raw materials for microcrystalline cellulose manufacturing. Cellulose 19(1):219–235. https://doi.org/10.1007/s10570-011-9636-610.1007/s10570-011-9636-6 ↗
55. Wang W, Zhu Y, Cao J, Sun W (2015) Correlation between dynamic wetting behavior and chemical components of thermally modified wood. Appl Surf Sci 324:332–338. https://doi.org/10.1016/j.apsusc.2014.10.13910.1016/j.apsusc.2014.10.139 ↗
56. Wang Z, Xu E, Fu F, Lin L, Yi S (2022a) Characterization of wood cell walls treated by high-intensity microwaves: effects on physicochemical structures and micromechanical properties. Ind Crop Prod 187:115341. https://doi.org/10.1016/j.indcrop.2022.11534110.1016/j.indcrop.2022.115341 ↗
57. Wang D, Fu F, Lin L (2022b) Molecular-level characterization of changes in the mechanical properties of wood in response to thermal treatment. Cellulose 29(6):3131–3142. https://doi.org/10.1007/s10570-022-04471-310.1007/s10570-022-04471-3 ↗
58. Wise LE (1946) Chlorite holocellulose, its fractionation and bearing on summative wood analysis and studies on the hemicelluloses. Paper Trade J 122(2):35–43
59. Xing D, Li J, Wang X, Wang S (2016) In situ measurement of heat-treated wood cell wall at elevated temperature by nanoindentation. Ind Crop Prod 87:142–149. https://doi.org/10.1016/j.indcrop.2016.04.01710.1016/j.indcrop.2016.04.017 ↗
60. Xing X, Li S, Jin J, Lin L, Zhou Y, Fu F (2022) Bending properties and damage evolution characteristics of high-intensity microwave treated radiata pine lumber (in Chinese). J Beijing Forestry Univ 44(8):107–116. https://doi.org/10.12171/j.1000−1522.202200910.12171/j.1000−1522.2022009 ↗
61. Xu E, Lin L, Li S, Peng L, Zhou Y, Fu F (2020) Wood microwave treatment technology and its applications (in Chinese). China Wood Ind 34(1):20–24. https://doi.org/10.19455/j.mcgy.2020010510.19455/j.mcgy.20200105 ↗
62. Yu IKM, Chen H, Abeln F et al (2021) Chemicals from lignocellulosic biomass: a critical comparison between biochemical, microwave and thermochemical conversion methods. Crit Rev Environ Sci Technol 51(14):1479–1532. https://doi.org/10.1080/10643389.2020.175363210.1080/10643389.2020.1753632 ↗
63. Zhai C, Teng N, Pan B et al (2018) Revealing the importance of non-thermal effect to strengthen hydrolysis of cellulose by synchronous cooling assisted microwave driving. Carbohydr Polym 197:414–421. https://doi.org/10.1016/j.carbpol.2018.06.03110.1016/j.carbpol.2018.06.031 ↗
64. Zhao J, Xiuwen W, Hu J, Liu Q, Shen D, Xiao R (2014) Thermal degradation of softwood lignin and hardwood lignin by TG-FTIR and Py-GC/MS. Polym Degrad Stabil 108:133–138. https://doi.org/10.1016/j.polymdegradstab.2014.06.00610.1016/j.polymdegradstab.2014.06.006 ↗
65. Zheng A, Jiang L, Zhao Z et al (2016) Effect of hydrothermal treatment on chemical structure and pyrolysis behavior of Eucalyptus wood. Energy Fuel 30(4):3057–3065. https://doi.org/10.1021/acs.energyfuels.5b0300510.1021/acs.energyfuels.5b03005 ↗
66. Zhu G (2022) Overview of imports and exports of timber and wood products in 2021 (in Chinese). China Wood-Based Panel