journal article·2021-07Open access

High temperature tribological studies on hardfaced tool steels for press hardening of Al-Si coated boron steel

Leonardo Pelcastre, Evan Kurnia, Jens Hardell, Justine Decrozant-Triquenaux, Braham Prakash

Wear· Volume 476

Abstract

Press hardening tools are expected to operate satisfactorily for thousands of forming cycles before being replaced. An approach to enhance the durability of tools in operation, and improve the process economy, is to refurbish them by depositing new material on the tool through welding, or hardfacing, when its surface is adversely damaged. The welding process changes the microstructure of the original tool steel and the deposited material also has a different microstructure, as well as different chemical composition to facilitate the welding process. Dissimilar friction behaviour between the original tool steel and the welded material can lead to unstable friction forces during forming. This work therefore focuses on understanding the tribological behaviour of different hardfacing materials, deposited through TIG welding, and their interaction with Al-Si coated boron steel at high temperatures. The tribological behaviour is evaluated using a hot-strip drawing tribometer capable of simulating the sliding conditions in the press hardening process. The effect of temperature on the microstructure and on the friction and wear behaviour of the weld material is also studied by conducting tests at room temperature and at 500 °C. In general, friction and the governing wear mechanisms are similar for the evaluated hardfacing materials. Friction stability was observed to be closely related to the temperature of the workpiece material. Temperature of the tool significantly affects the formation and structure of material transfer layers onto tool steels.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Naderi · 2007
2. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
3. Influence of microstructural evolution of Al-Si coated UHSS on its tribological behaviour against tool steel at elevated temperatures10.1016/j.jmatprotec.2015.03.009 ↗
4. Phase transformations in the Al-Si coating during the austenitization step10.4028/www.scientific.net/SSP.172-174.784 ↗
5. Galling mechanisms during interaction of tool steel and Al-Si coated ultra-high strength steel at elevated temperature10.1016/j.triboint.2013.08.007 ↗
6. Experimental investigation of the tribological behavior and wear mechanisms of tool steel grades in hot stamping of a high-strength boron steel10.1016/j.wear.2012.07.001 ↗
7. Tribological investigation on friction and wear behaviour of coatings for hot sheet metal forming10.1016/j.wear.2011.02.011 ↗
8. Friction and wear mechanisms during hot stamping of AlSi coated press hardening steel10.1016/j.wear.2017.03.014 ↗
9. The effects of temperature on friction and wear mechanisms during direct press hardening of Al-Si coated ultra-high strength steel10.1016/j.wear.2018.04.006 ↗
10. Numerical investigation of galling in a press hardening experiment with AlSi-coated workpieces10.1016/j.engfailanal.2019.01.059 ↗
11. Hardfacing technologies for improvement of wear characteristics of hot working tools: a review10.1007/s12541-013-0174-z ↗
12. Increasing of the lifetime of large forging dies by repairwelding10.1088/1757-899X/307/1/012011 ↗
13. Laser cladding of vanadium-carbide tool steels for die repair10.1016/j.phpro.2011.03.044 ↗
14. Effects of temperature and sliding distance on the wear behavior of austenitic Fe-Cr-C-Si hardfacing alloy10.1007/s11249-006-9170-0 ↗
15. Remanufacture of hot forging tools and dies using laser metal deposition with powder and a hard-facing alloy Stellite 21®10.1007/s13243-018-0063-9 ↗
16. Wear characteristics of STD61 tool steel according to repairing methods for Al porthole extrusion die: direct metal deposition, welding, parent material10.1007/s12206-018-0434-z ↗
17. Tribological behaviour of Zn coated UHSS sliding against hot-work tool steel at high temperatures10.1016/j.wear.2016.10.029 ↗
18. Influence of surface roughness of thermal-spray coatings on friction and wear in hot stamping applications
19. Experimental evaluation of galling under press hardening conditions10.1007/s11249-018-1023-0 ↗
20. Stachowiak · 2014 · 525