journal article·2024-12-31Open access

Laser powder bed fusion of 316L stainless steel and K220 copper multi-material

Zhongji Sun, Chao Tang, Verner Soh, Coryl Lee, Xiaoxiang Wu, Swee Leong Sing, Alexander ZhongHong Liu, Siyuan Wei, Kun Zhou, Cheng Cheh Tan, Pei Wang, Chee Kai Chua

Virtual and Physical Prototyping· Volume 19· Issue 1

Abstract

Multi-material additive manufacturing holds immense potential for performance and functionality enhancement. Past research efforts primarily focused on the horizontal interface (perpendicular to the sample build direction) during the laser-powder bed fusion (LPBF) of multi-materials, whereas a few studies demonstrated that the vertical interface (parallel to the sample build direction) is in fact the main obstacle towards high-integrity multi-material fabrication in a three-dimensional space. In this work, facilitated by our own patented powder spreading device, we explored the mechanisms behind defect formation along both the horizontal and vertical interfaces during the LPBF production of 316L stainless steel and K220 copper multi-materials. High-fidelity fluid dynamics simulations were also conducted to rationalise the experimental observations. A practical process parameter optimisation approach is also proposed at the end, with the aim of mitigating those large defects currently occurring near the vertical interface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), Singapore, Republic of Singapore

Institute of High Performance Computing (IHPC), Agency for Science Technology and Research (A*STAR), Singapore, Republic of Singapore

School of Iron and Steel, Soochow University, Suzhou, People’s Republic of China

Department of Mechanical Engineering, National University of Singapore, Singapore, Singapore

ASTM International, Singapore, Singapore

School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore

Engineering Cluster, Singapore Institute of Technology, Singapore, Republic of Singapore

Engineering Product Development Pillar, Singapore University of Technology and Design, Singapore, Singapore

Funding

Career Development Fund · Young Individual Research Grant · ASTAR-CSIRO Research Industry · Agency for Science, Technology and Research of Singapore

References (45)

Show source-provided references
1. 10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
2. Dong Z, Han C, Zhao Y, et al. Role of heterogenous microstructure and deformation behavior in achieving superior strength-ductility synergy in zinc fabricated via laser powder bed fusion. Int J Extrem Manuf. 2024;6.
3. 10.1016/j.matdes.2023.11202310.1016/j.matdes.2023.112023 ↗
4. 10.1016/j.scriptamat.2023.11572310.1016/j.scriptamat.2023.115723 ↗
5. 10.1016/j.actamat.2023.11953410.1016/j.actamat.2023.119534 ↗
6. 10.1016/j.jmatprotec.2024.11833410.1016/j.jmatprotec.2024.118334 ↗
7. 10.36922/msam.226410.36922/msam.2264 ↗
8. 10.1016/j.msea.2023.14579510.1016/j.msea.2023.145795 ↗
9. 10.1016/j.scriptamat.2023.11544110.1016/j.scriptamat.2023.115441 ↗
10. 10.1080/17452759.2022.213704810.1080/17452759.2022.2137048 ↗
11. 10.18063/msam.v1i3.1810.18063/msam.v1i3.18 ↗
12. 10.1016/j.pmatsci.2021.10079510.1016/j.pmatsci.2021.100795 ↗
13. 10.1016/j.matdes.2023.11166110.1016/j.matdes.2023.111661 ↗
14. 10.1016/j.addma.2021.10257410.1016/j.addma.2021.102574 ↗
15. 10.1007/s11465-023-0765-z10.1007/s11465-023-0765-z ↗
16. 10.1016/j.cirp.2018.04.09610.1016/j.cirp.2018.04.096 ↗
17. 10.1016/j.jmst.2020.07.04410.1016/j.jmst.2020.07.044 ↗
18. 10.3390/mi1211139410.3390/mi12111394 ↗
19. 10.1016/j.ijpvp.2021.10456010.1016/j.ijpvp.2021.104560 ↗
20. 10.1016/j.matchar.2014.05.00110.1016/j.matchar.2014.05.001 ↗
21. 10.1016/j.msea.2019.02.09710.1016/j.msea.2019.02.097 ↗
22. 10.1016/j.addma.2020.10147410.1016/j.addma.2020.101474 ↗
23. 10.1016/j.jmst.2020.11.04810.1016/j.jmst.2020.11.048 ↗
24. 10.1016/j.jmrt.2023.03.07310.1016/j.jmrt.2023.03.073 ↗
25. Rankouhi B, Jahani S, Pfefferkorn FE, et al. Compositional grading of a 316L-Cu multi-material part using machine learning for the determination of selective laser melting process parameters. Addit Manuf. 2021;38:101836.
26. 10.1016/j.jmapro.2023.02.04110.1016/j.jmapro.2023.02.041 ↗
27. 10.3390/met1201004410.3390/met12010044 ↗
28. 10.1016/j.heliyon.2023.e1830110.1016/j.heliyon.2023.e18301 ↗
29. Zhongji S Leong S Kai C et al. Hopper for Powder Bed Fusion Additive Manufacturing. 2017.
30. 10.1016/j.ijheatmasstransfer.2022.12285510.1016/j.ijheatmasstransfer.2022.122855 ↗
31. 10.1007/BF0034966210.1007/BF00349662 ↗
32. 10.1007/s10853-006-1258-210.1007/s10853-006-1258-2 ↗
33. 10.1016/j.jmatprotec.2021.11717810.1016/j.jmatprotec.2021.117178 ↗
34. Wang CP, Liu XJ, Shi RP, et al. Design and formation mechanism of self-organized core/shell structure composite powder in immiscible liquid system. Appl Phys Lett. 2007;91:1–4.
35. 10.2351/7.000048910.2351/7.0000489 ↗
36. 10.1016/j.jmatprotec.2004.05.00410.1016/j.jmatprotec.2004.05.004 ↗
37. 10.1108/1355254061070701310.1108/13552540610707013 ↗
38. 10.1016/j.msea.2016.08.01710.1016/j.msea.2016.08.017 ↗
39. 10.1016/j.jmatprotec.2014.06.00510.1016/j.jmatprotec.2014.06.005 ↗
40. Sun Z, Ma Y, Ponge D, et al. Thermodynamics-guided alloy and process design for additive manufacturing. Nat Commun. 2022;13.
41. 10.1179/02670830110151061810.1179/026708301101510618 ↗
42. 10.1038/s41467-021-22704-010.1038/s41467-021-22704-0 ↗
43. 10.1016/j.jmatprotec.2021.11733210.1016/j.jmatprotec.2021.117332 ↗
44. 10.1016/j.jmatprotec.2021.11713010.1016/j.jmatprotec.2021.117130 ↗
45. 10.1016/j.matdes.2016.05.03510.1016/j.matdes.2016.05.035 ↗