Design guidance for ferrites: Insights from density functional theory on magnetic properties

• Magnetic properties of ferrite crystals estimated with density functional theory. • Large supercell models used to tackle compositional diversity. • DFT parameters tuned to achieve good matching with experimental literature. • General compositions recommended for applications in heating, imaging, recording. A grand challenge in materials research is identifying the relationship between composition and performance. Herein, we explore this relationship for magnetic properties, specifically magnetic saturation (M s ) and magnetocrystalline anisotropy energy (K) of ferrites. Ferrites are materials derived from magnetite (chemical formula = Fe 3 O 4 ) that comprise metallic elements such as Fe, Mn, Ni, Co, Cu and Zn. Experimentally, synthesizing and characterizing ferrites is time consuming. Further, selection of compositions to achieve particular magnetic properties currently relies on intuition. To address this, in this work, density functional theory (DFT) is used to predict M s and K for 571 ferrite structures. These structures are primarily double-substituted non-stoichiometric ferrites with formulae M1 x M2 y Fe 3–x–y O 4 , where M1 and M2 can be Mn, Ni, Co, Cu and/or Zn and 0 ≤ x ≤ 1 and y = 1–x. Calculated magnetic properties for the structures in this study vary from 0.04 × 10 5 to 9.6 × 10 5 A m −1 for M s and from 0.02 × 10 5 to 14.08 × 10 5 J m −3 for K. All structures are made publicly available in a FAIR database