Towards online evaluation of Goss-texture in grain-oriented ferromagnetic sheets
Source abstract
Abstract
We propose an experimental method for the identification of the crystal grain orientation in polycrystalline ferromagnetic materials with Goss texture. The grain orientation respect to the lamination plane is evaluated by a suitable contact-less vector measurement of the magnetic field under rotational polarization. First of all, the fundamental in-plane easy axis is detected. After that, the measured data are numerically processed, taking into account a cubic anisotropy grain model, suitably developed, in order to estimate the orientation of the other two crystal axes respect to the lamination plane. The comparison of the obtained results with Electron Back-Scattering Diffractometry (EBSD) measurements confirms the validity of the proposed approach. Mull-grain and single-crystal test specimens are analyzed in order to investigate the possibility to apply this method as on-line detection system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Bunge · 1982
2. Texture and magnetic properties
3. Texture and magnetic properties in Fe-Si steel10.1007/BF02658415 ↗
4. Anisotropy of magnetic properties in textured materials10.1155/TSM.11.93 ↗
5. Influence of electrical steel sheet textures on their magnetization curves10.2478/aee-2013-0034 ↗
6. S. Cicalè et al., On the Relationship between Magnetic Behaviour and Microstructure Characteristics in Grain Oriented Fe 3%Si”, Soft Magnetic Materials 16, Vol. 1.
7. Abnormal grain growth in silicon steel10.4028/www.scientific.net/MSF.408-412.949 ↗
8. Overview of microstructure and microtexture development in grain-oriented silicon steel10.1016/j.jmmm.2006.02.116 ↗
9. Texture evolution in grain-oriented electrical steel during hot band annealing and cold rolling10.1111/j.1365-2818.2008.02001.x ↗
10. Analysis of microstructure and microtexture in grain-oriented electrical steels (GOES) during manufacturing process
11. On the development of the goss texture in iron-3% silicon10.1016/0001-6160(84)90161-5 ↗
12. Texture Measurements of grain-oriented electrical steels after secondary recrystallization10.1016/j.jmmm.2008.04.102 ↗
13. Effect of primary recrystallization microstructure on abnormal growth of Goss grains in a twin-roll cast grain-oriented electrical steel10.1016/j.matdes.2017.06.016 ↗
14. Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel10.1016/S1359-6454(02)00021-6 ↗
15. Retention of the Goss orientation between microbands during cold rolling of an Fe3%Si single crystal10.1016/j.actamat.2006.11.048 ↗
16. Composition and orientation effects on the final recrystallization texture of coarse-grained Nb-containing AISI 430 ferritic stainless steels10.1016/j.msea.2011.01.007 ↗
17. EBSD study of angular deviations from the Goss component in grain-oriented electrical steels10.1016/j.micron.2013.08.003 ↗
18. Thin Grain oriented electrical steel for pwm voltages fed magnetic cores10.1063/1.4993712 ↗
19. Energy efficient electrical steels: magnetic performance prediction and optimization
20. Application of Co-Ni-P coating on grain-oriented electrical steel10.1109/TMAG.2015.2496315 ↗
21. A, Grain detection system for grain oriented electrical steels10.1109/20.45322 ↗
22. Computer-controlled domain detector10.1143/JJAP.22.361 ↗
23. Nondestructive rapid investigation of domains and grain boundaries of grain oriented silicon steel
24. Stewart · 2016
25. Surface testing the crystal grain orientation by lag angle plots10.1109/TMAG.2017.2684541 ↗
26. In-plane magnetic anisotropy detection of crystal grain orientation in goss-textured ferromagnets10.1109/TMAG.2017.2713448 ↗
27. A challenging hysteresis operator for the simulation of goss-textured magnetic materials10.1016/j.jmmm.2017.01.068 ↗
28. M. Pompei, S. Quondam Antonio, Measuring Magnetic Losses in Si-Fe Alloys with Rotating Polarization, Proc. of 2016 AEIT Annual Conference, Napoli, Italy.10.23919/AEIT.2016.7892809 ↗
29. Surface field measurements in vector characterization of si-fe magnetic steel samples10.3233/JAE-141795 ↗
30. A Mechanism of Magnetic Hysteresis in Heterogeneous Alloys10.1109/TMAG.1991.1183750 ↗