Semihard magnetic properties of TiFe2.5 iron-rich Laves phase and the effect of 4d- and 5d-element-substitutions for Ti
Source abstract
Abstract
Rare-earth-free compounds exhibiting modest intrinsic hard magnetic properties may still yield viable permanent magnets if their constituent elements are abundant and inexpensive, and the properties are at least comparable to those of the hard ferrites. In this study, one such compound, the off-stoichiometric TiFe 2.5 Laves phase with the hexagonal C14 crystal structure, was found to exhibit – in addition to the already known room-temperature ferromagnetism – a uniaxial, albeit weak, magnetic anisotropy. With a Curie temperature of 422 K, saturation magnetization of 55.3 Am 2 /kg and magnetic hardness parameter of 0.97 this semihard compound is just below the threshold for being of interest for the development into permanent magnets. Replacing a small fraction of Ti with the 4d Nb and Mo or with the 5d Ta or W increases the anisotropy field, but only below room temperature. Replacing Ti with Zr or Hf increases the Curie temperature and leads to a spin reorientation below 200 K. All these substitutions, as well as combined (Zr,W) and (Nb,W) substitutions, fail to improve the room-temperature intrinsic hard magnetic properties of the Fe-rich Laves phase. Furthermore, an attempt to develop a room-temperature coercivity through high-energy ball-milling yielded a value of 0.026 T, an unusually small 2.9% fraction of the anisotropy field. Defects inherent in the C14 crystal lattice may be responsible for the underperformance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic properties of thin films · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Hard magnetic materials: A perspective10.1109/TMAG.2011.2166975 ↗
2. Perspectives for high-performance permanent magnets: applications, coercivity, and new materials
3. Permanent magnets: Plugging the gap10.1016/j.scriptamat.2012.04.036 ↗
4. Current progress and future challenges in rare-earth-free permanent magnets10.1016/j.actamat.2018.07.049 ↗
5. Magnetocrystalline anisotropy of Laves phase Fe2Ta1−xWx from first principles: Effect of 3d-5d hybridization, Phys10.1103/PhysRevB.96.064422 ↗
6. Hard magnetic off-stoichiometric (Fe, Sb)2+xHf1-x intermetallic phase10.1002/pssr.201700184 ↗
7. L. Kyvala, M. Tchaplianka, A.B. Shick, S. Khmelevskyi, D. Legut, Large uniaxial magnetic anisotropy of hexagonal Fe-Hf-Sb alloys, Cryst. 10 (2020) 430,doi: 10.3390/cryst10060430.10.3390/cryst10060430 ↗
8. Hard magnetic Laves-type (Fe, Si)2Zr phase in the known Fe–Si–Zr ternary system
9. Assessment of off-stoichiometric Zr33-xFe52+xSi15 C14 Laves phase compounds as permanent magnet materials10.1063/1.5006488 ↗
10. Semi-hard magnetic nanocomposites based on out-of-equilibrium Fe2+δNb and Fe2+δTa Laves phases10.1063/1.5079727 ↗
11. A.M. Gabay, Chaoya Han, Chaoying Ni, G.C. Hadjipanayis, Assessment of directionally solidified eutectic Sm–Fe(Co)–Ti alloys as permanent magnet materials, IEEE Trans. Magn., in press, doi: 10.1109/TMAG.2023.3280849.10.1109/TMAG.2023.3280849 ↗
12. Magnetic properties of ZrFe2 and TiFe2 within their homogeneity range10.1002/pssb.19680290124 ↗
13. The Fe-Ti (iron-titanium) system10.1007/BF02868286 ↗
14. Relation between structure and magnetism of TixFe100-x alloys within the C14 Laves-phase stability range10.1016/S0304-8853(98)00298-4 ↗
15. Ferro- and antiferromagnetism of the Laves phase compound in Fe-Ti alloy system10.1143/JPSJ.25.1189 ↗
16. Model for the composition-dependent ferromagnetic to antiferromagnetic transition in Fe2Ti10.1063/1.1658924 ↗
17. Development and intrinsic properties of hexagonal ferromagnetic (Zr, Ti)Fe210.1063/1.4868696 ↗
18. Magnetic properties of Fe-5d (Os, Ir, and Pt) nanowires encapsulated in carbon nanotubes
19. Permanent magnetism of intermetallic compounds between light and heavy transition-metal elements
20. Magnetocrystalline anisotropy of Fe5PB2 and its alloys with Co and 5d elements: A combined first-principles and experimental study10.1103/PhysRevB.98.214431 ↗
21. Enhancement of magnetic anisotropy of Fe5PB2 with W substitution: ab-initio study10.1063/1.5097081 ↗
22. Computational screening of Fe-Ta hard magnetic phases10.1103/PhysRevB.101.014426 ↗
23. Ferromagnetic tetragonal L10-type MnGa isotropic nanocrystalline microparticles10.1109/TMAG.2013.2245868 ↗
24. Coercivity and phase evolution in mechanically milled (FeCo)2B-type hard magnetic alloy
25. Powder Cell - a program for the representation and manipulation of crystal structures and calculation of the resulting X-ray powder patterns10.1107/S0021889895014920 ↗
26. Determination of intrinsic magnetic material parameters of Nd2Fe14B from magnetic measurements of sintered Nd15Fe77B8 magnets10.1016/0304-8853(86)90014-4 ↗
27. Atomic radii and interatomic distances in metals10.1021/ja01195a024 ↗
28. Structural investigations of the Nb1−xSixT2 and Nb1−xAlxT2 (T = Cr, Mn, Fe Co, Ni) systems10.1016/0022-5088(86)90690-9 ↗
29. Phase equilibria in ternary alloys based on iron-group metals and containing refractory metals (Mo, W, Nb, Ta)10.1016/0022-5088(88)90347-5 ↗
30. The 57Fe Mössbauer isomer shift in intermetallic compounds of iron10.1016/0378-4363(86)90492-4 ↗
31. Structure and stability of Laves phases. Part I. Critical assessment of factors controlling Laves phase stability10.1016/j.intermet.2004.02.010 ↗
32. Magnetic anisotropy — How much is enough for a permanent magnet?10.1016/j.scriptamat.2015.09.021 ↗
33. The study of nonequilibrium Fe–Ti alloys prepared by high-energy mechanical deformation10.1063/1.361206 ↗
34. An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy10.1016/j.actamat.2019.05.041 ↗
35. Self-accommodated defect structures modifying the growth of Laves phase10.1016/j.jmst.2020.05.042 ↗