Factors influencing the low-temperature fluidity of kerosene-based magnetic fluid: Surfactant, volume fraction
Source abstract
Abstract
To explore the effect factors on the fluidity of magnetic fluid at low temperatures, the magnetic fluid was prepared by dispersing stearic acid and oleic acid-modified particles into kerosene, the effect of volume fraction was also considered. The microstructure and morphology of the particles were obtained by XRD and TEM, and the surfactant content on the surface of the particles was determined by TG. The hysteresis loops of magnetic particles and magnetic fluids were obtained by VSM. As the temperature decreased, it was observed that the magnetic fluid with a high volume fraction of stearic acid-modified particles would lose fluidity quickly under a non-magnetic field. But it could respond to a certain magnetic field, and the fluidity could be restored quickly by increasing the temperature. The rheometer measured the viscosity of the magnetic fluid-dependent temperature, shear rate, and magnetic field. When a high melting point of stearic acid coated particles, the stearic acid with adequate chain length could affect the fluidity of magnetic fluid with a volume fraction greater than 5% at roughly 20 °C. The free surfactant formed micelle, the base carrier was restricted in the particles adhering to the micelles, eventually causing the magnetic fluid to lose fluidity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Characterization and Applications of Magnetic Nanoparticles · Geomagnetism and Paleomagnetism Studies · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Rosensweig, Ferrohydrodynamics, Cambridge University Press1985.
2. Recent progress in ferrofluids research: novel applications of magnetically controllable and tunable fluids10.1039/C4SM01308E ↗
3. Hydromagnetic flow of two immiscible nanofluids under the combined effects of Ohmic and viscous dissipation between two parallel moving plates10.1016/j.jmmm.2023.170741 ↗
4. Electro-magnetohydrodynamics hybrid nanofluid flow with Gold and Magnesium oxide nanoparticles through vertical parallel plates10.1016/j.jmmm.2022.170136 ↗
5. Theoretical analysis and experimental study on loading process among stages of magnetic fluid seal10.3233/JAE-140126 ↗
6. Experimental study on thermal conductivity and magnetization behaviors of kerosene-based ferrofluid loaded with multiwalled carbon nanotubes10.1021/acsomega.0c00964 ↗
7. Fabrication and properties research on a novel perfluoropolyether based ferrofluid10.1016/j.jmmm.2018.10.039 ↗
8. Influence of rheological properties on the starting torque of magnetic fluid seal10.1109/TMAG.2019.2934716 ↗
9. Theoretical analysis and experimental study of the characteristics of magnetic fluid seal with a large diameter at high/low temperatures10.3233/JAE-180065 ↗
10. Magnetic susceptibility of concentrated ferrocolloids10.1007/s10595-005-0080-x ↗
11. On the colloidal and chemical stability of solar nanofluids: from nanoscale interactions to recent advances, physics Reports-Review Section of
12. An experimental and theoretical study of the influence of surfactant on the preparation and stability of ammonia-water nanofluids10.1016/j.ijrefrig.2011.06.007 ↗
13. Magnetic characterization of surface-coated magnetic nanoparticles for biomedical application10.1016/j.jmmm.2010.11.054 ↗
14. Colloidal stability of oleic- and ricinoleic-acid-coated magnetic nanoparticles in organic solvents10.1016/j.jcis.2010.11.043 ↗
15. The effect of surfactants on heat transfer feature of nanofluids10.1016/j.expthermflusci.2012.12.004 ↗
16. Polymeric Coatings on silver nanoparticles hinder autoaggregation but enhance attachment to uncoated surfaces10.1021/la202884f ↗
17. Low-temperature magnetic fluid stabilized with mixed fatty acids10.1134/S1061933X10060128 ↗
18. Directed Self-Assembly of Nanoparticles10.1021/nn100869j ↗
19. The role of interparticle and external forces in nanoparticle assembly10.1038/nmat2206 ↗
20. Direct observation of dipolar chains in iron ferrofluids by cryogenic electron microscopy10.1038/nmat811 ↗
21. Monodisperse magnetite nanofluids: synthesis, aggregation, and thermal conductivity10.1063/1.3518045 ↗
22. Van der Waals versus dipolar forces controlling mesoscopic organizations of magnetic nanocrystals10.1038/nmat1054 ↗
23. Probing of field-induced structures and tunable rheological properties of surfactant capped magnetically polarizable nanofluids10.1021/la304118b ↗
24. Structural impact of kerosene-Al 2 O 3 nanoliquid on MHD Poiseuille flow with variable thermal conductivity: application of cooling process10.1016/j.molliq.2018.05.103 ↗
25. Heat transfer in magnetite (fe3o4) nanoparticles suspended in conventional fluids: refrigerant-134a (c2h2f4), kerosene (c10h22), and water (h2o) under the impact of dipole10.1615/HeatTransRes.2019029919 ↗
26. Magnetic fluids stabilized by polypropylene glycol10.1016/j.jmmm.2010.11.005 ↗
27. Magnetic nanocomposites based on hydrogenated epoxy resin10.1016/j.matchemphys.2011.11.077 ↗
28. Synthesis of magnetic nanoparticles of Fe3O4 and CoFe2O4 and their surface modification by surfactant adsorption10.5012/bkcs.2006.27.2.237 ↗
29. Effects of unsaturation on film structure and friction of fatty acids in a model base oil10.1016/j.jcis.2008.05.068 ↗
30. Comparative structure analysis of non-polar organic ferrofluids stabilized by saturated mono-carboxylic acids10.1016/j.jcis.2009.03.005 ↗
31. Functionalization of monodisperse iron oxide NPs and their properties as magnetically recoverable catalysts10.1021/la304410z ↗
32. Structure of alkanoic acid stabilized magnetic fluids. A small-angle neutron and light scattering analysis10.1021/la9916732 ↗
33. Size-dependent superparamagnetic properties of Mn spinel ferrite nanoparticles synthesized from reverse micelles10.1021/cm0009470 ↗
34. Magnetic properties of stable dispersions of subdomain magnetite particles10.1063/1.1658812 ↗
35. Magneto-granulometric analysis of concentrated ferrocolloids10.1016/S0304-8853(96)00067-4 ↗
36. Preparation and magnetic properties of concentrated magnetic fluids on alcohol and water carrier liquids10.1016/S0304-8853(02)00614-5 ↗
37. R. Massart, IEEE Trans. Mag, (1981).
38. Stability and magnetic characterization of oleate-covered magnetite ferrofluids in different nonpolar carriers10.1016/j.jcis.2005.04.099 ↗
39. Peculiar magnetic aftereffect of highly diluted frozen magnetic fluids10.1016/j.jmmm.2006.03.044 ↗
40. Measurements of particle size distribution parameters in ferrofluids10.1109/TMAG.1978.1059918 ↗
41. Scaling concepts in suspension rheology10.1122/1.550120 ↗
42. Magnetorheology of magnetic holes compared to magnetic particles10.1122/1.551075 ↗
43. Experimental evidence for reversible zippering of chains in magnetic nanofluids under external magnetic fields10.1103/PhysRevE.80.041401 ↗
44. Tuning of thermal conductivity and rheology of nanofluids using an external stimulus10.1021/jp204827q ↗
45. Interrelationship among viscosity, temperature and age of lubricant10.1108/00368790610640109 ↗
46. Accurate molecular dimensions from stearic-acid monolayers10.1021/ed061p815 ↗
47. Temperature dependence of magnetic moments of nanoparticles and their dipole interaction in magnetic fluids10.1016/j.jmmm.2014.08.019 ↗
48. The structure of ferrofluids: a status report10.1016/j.cocis.2005.07.005 ↗
49. Steric interaction between spherical colloidal particles10.1103/PhysRevE.72.061405 ↗
50. A review of temperature influence on adsorption mechanism and conformation of water soluble polymers on the solid surface10.1080/01932691.2010.528332 ↗
51. Rheological properties of dense ferrofluids effect of chain-like aggregates10.1016/S0304-8853(02)00674-1 ↗
52. Effect of viscosity of base fluid on thermal conductivity of nanofluids10.1063/1.3046732 ↗